do not e-mail, the internet connection is fine

Similar Questions

• delete a block - my computer won't let me use google chrome as a browser. It indicates that the internet connection is not available.

  When you use the internet, my virus detector asked if I would allow google chrome to download a newer version. I clicked on the decline, and then my internet has stopped working. I finally got back on, but now my computer won't let me use google chrome as a browser. It indicates that the internet connection is not available. I was able to use other browsers, but not Google. I tried disabling my firewall to see if it would work then, but it still doesn't work. Any suggestions? I'm afraid, that I blocked it somehow. Thank you!!

  Hello

  I suggest you post your question in the Google Chrome forums here: http://www.google.com/support/forum

  This looks like a problem with this specific program and not with Windows. I hope this helps!

• continues to fall sharply the internet connection for the computer but the xbox is not yet

  If the computer is on and I walk for an hour or two, when I come back, the internet connection went only to the computer.

  Xbox live still works fine.  So, I have to unplug the router, then plug back in and then try again to connect.  Usually it works fine then.

  But he's so old when you do this several times a day. Help!.  Does anyone know what is the problem?  I don't know what else to try.

  Thank you!

  As you mentioned that your XBOX works perfectly well and you face the problem only on your computer, this means that your Linksys also works very well, it has something to do with the computer itself. Also after some time you made the day before computers and when you resume your computer, that in view of the time, you dosent computer to communicate with your router and that is why you are not able to go online from your computer.

  Here are a few parameters that you can try on your computer, I think that might solve the problem...

  Win XP: Click the Start button > go to RUN > type in "ncpa.cpl" - hit OK > right-click on icon "' connection to the Local network'" and select properties-here click on "Set" jaspal-click on a button on the "Advanced" tab-In 'property' box, point, highlight link speed and duplex/network/type or Media type connection - and here (network connections)
  the 'Value' box select 10 MB/s half duplex / 10 half mode base T/10 basic and click OK.

  Vista: Click the Start button > Panel > network and Sharing Center-click view the status of the Local Area Connection - click on continue click on the properties below-click on a button on the button Configure click on the tab 'Advanced' - in the area of 'Property' highlight link speed and duplex/connection network/type or type of media - and in the 'value' box select 10 MB/s half duplex / 10 half mode base T/10 basic and click on OK.

  If it dosent always works, so I think you need to update the drivers for your NIC, once you update, it will not solve the problem.

• Interruption of the internet connection. Says "network can not find proxy address.

  

   
  

  0
  I am connected directly to internet DSL.  Did a system restore and lost my internet.  When I got to the computer it connected to the internet without problem.  Now nothing I try works.  I'm so frustrated... any ideas?  It finds no network and won't let me set up a broadband access.
  Help!      I tried to undo the restoration and, of course, windows cannot do due to a missing file

  Hi TopHatter,

  ·         You try to connect to a Wired or wireless network?
  ·         Recent changes to the computer before the show took place?

  First of all, make sure that explore the Internet proxy settings are not enabled. Follow the steps for this control.

  1. launch Internet Explorer.
  2. click on Tools , then click Internet Options.
  3. click on connections tab and click LAN settings.
  4. make sure that under Proxy Server , none of these options are checked. If something is activated, please the box.

  I suggest you to see if you are able to connect to internet wired to the router.

  If your computer has problems to connect to the Internet or to other computers on a network, try to use one of the network troubleshooting utilities to solve the problem.

  Open the convenience store network by double-clicking the network icon in the tray and then clicking on solving of problems

  Open the Internet connections convenience store by clicking on the Start, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under network and Internet, click connect to the Internet.

  Follow the steps from the link below that may help you solve the problem: Open convenience stores of networking: http://windows.microsoft.com/en-US/windows7/Open-networking-troubleshooters

  using the utility in Windows 7 Network Troubleshooter: http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If you are unable to connect to your wireless network, and then follow the steps from the link below:

  How can I solve the problems of network card?: http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows update error: your PC is not connected to the internet. connect to the internet, and then try again

  Original title:

  Windows Update

  Hello

  When I open the store windows I get an error saying

  your PC is not connected to the internet. connect to the internet, and then try again

  is there an internet setting before the update of win8 or one of the applications

  Thank you

  How to solve the problems of connection with Windows Update
  http://Windows.Microsoft.com/en-us/Windows-8/how-solve-connection-problems-Windows-Update

  How to troubleshoot problems connecting to Windows Update or Microsoft Update
  http://Support2.Microsoft.com/kb/818018/en-AU

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• [Workstation, player] Not connected to the internet - 'connected' unchecked

  Hi to everyone.

  I have a few virtual machines, but they are not connected to the network, when I checked the status of the device adapter was disabled for

  connected & connect at power on is checked, how could I enable (make a checkmark) on 'connected '?

  If I have to use a script, please explain me how to do.

  PS: this is an update of Windows 10 installation, and I tried NAT, bridged and all other types of connections.

  Thank you

  Host: Windows 10 x 64
  Guests: Linux VMs

  Connection: WiFi
  PC: Computer laptop Sony Vaio

  

  You are able to ping to an IP address (for example, 8.8.8.8) virtual machine?

  The error messages are on name resolution, which is not necessarily on the network connection. Please check if the network of the virtual machine configuration contains a valid DNS server address.

  André

• Time Capsule has lost the Internet connection and DNS servers

  I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.

  

  I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.

  It may or may not be important to mention the following:

  1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.

  2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:

  

  I would be grateful for any advice.

  Weird how everything's going well for a few years and then crazy when you have something will change.

  El Capo adds some network problems more... but something could be fundamentally wrong with the installer.

  Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.

  You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!

  1. I need to know what modem you are connected. Make and model please?

  2. the most important. What is the main router on your network or a modem?

  I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.

  https://discussions.Apple.com/thread/6509420

  It is not so difficult... You just know where you're going before you start.

  Airtport Utility cannot find airport Time Capsule on one of my Macs 2009

• Site Web Server not accessible via the internet

  Hello Apple community,

  I had a problem with the.app Web sites, where my site Internet (FQDN) is accessible via the network internal, but not accessible through the internet. I have port ports 80 and 443 passed on my firewall and I can see the ports open via nmap on an external connection.

  When I browse the site via http, I get redirect to 443 then it just resets and I get no error page. Internally, the page redirects to 443 and loads fine with the popup of trust initial cert (self-signed cert) that I then store to my keychain and loading the page well. I get no this pop up via an external network.

  Accessibility is accessible by 80 (green circle icon) but not of 443 for reasons I can't understand.

  I already tried to remedy the situation of the measures:

  Create a new self-signed cert to use. (same results)

  Disable ssl and disable redirection. (causes a load error in the browser)

  Wiped the OS reinstall OS X El Capitan and.app. (same results)

  Checked the port forwarding on my firewall Meraki 15 times (looks good)

  Disabled the feature IPS of the PPE on the Meraki (same results)

  Maybe I'm just on something? I hope someone out there can help.

  Thank you!

  Well, thought about it. < bangs head >.

  ATT Uverse uses port 443 for flow towards Wireless HD receivers in the House. There is a way to change the port it uses, and I'll try and do it later and post my results in case someone else is having the same problems.

  Thinks... "Why the hell ATT would use a common port for Wireless HD? SMH.

• Can not go on the internet when everything seems to be OK.

  It is a mini Ipad. Was on the internet for a long time, then suddenly will not go on the internet. Everything seems to be correct. The checkbox to the left of the network and internet icon appears to the right of the network, but it will not go on the internet.

  Settings - WiFi - < name of your wifi > - click on the i - if the IP address starts with 169 - then you may restart your router

  Other tips-

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Please see recommended settings of WiFi routers and Apple access points
  4. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  5. Settings - WiFi - < network name > - Click on forget network - do a restart forced 4 and then again add the network
  6. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  7. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  8. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  9. Backup the device to iTunes - restore as NEW (no backup) using iTunes - see if solves problem - if yes - restore backup
  10. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• How automatically dial the internet connection in the browser firefox to start the browser in internet Explorer

  I have ADSL modem broadband where I have to connect to the internet by connecting using the sequence of steps

  Control Panel > network connection > create a new connection > Internet > set up my connection manually > Connect using dial-up modem OR connect using a connection braodband including user name and password required
  create this connection, I must provide the user name and password provided by the ISP.

  I have to dial internet connection manually after the modem set automatically connect to the local network
  I found a solution for internet explore and changing the setting internet explore start automatically component internet connection that I start the internet explore.
  is their in mozilla firefox an option to automatically call the internet connection that I open the firefox browser?

  and there is no solution that I began my internet computer connections established automatically without having to open any browser, if this solution is not available, please tell about it.

  The setting that you set in IE also affects Firefox. For example, if you set the following, and then when Firefox makes a connection request to Windows, Windows is supposed to establish the connection:

  Windows Control Panel > Internet Options > connections or
  
  Internet Explorer Tools menu > Internet Options > connections

  "Dial whenever a network connection is not present"

  Source: How to make Firefox automatically dial up

• iMac loses the internet connection when I turn off wifi

  Any help appreciated! I'm not very computer savy! Can my grandson tell me (how) on some things.

  I lose the internet connection when wifi is disabled. It will happen when using any browser, Firefox-Safari-Google Chrome.

  Desktop computer is connected to the modem.

  Model name: iMac

  Processor name: Intel Core i7

  Processor speed: 3.4 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 8 MB

  Memory: 4 GB

  Any ideas? Thank you

  You can use an ethernet cable between the modem (= the internet connector) and the iMac.

  WiFi is like an invisible computer thread worms (among others) the modem. When you switch WiFi off, your computer cannot reach the modem and so there is no internet on your computer.

• "Connection error. Check the Internet connection. »

  I just installed my printer (an HP CM2320fxi upgrade). Everything works except ePrint/Web Services. The printer is connected directly to my router. It prints network computers. AirPrint works from iOS devices. It can scan to e-mail and documents are properly received by mail outside the network accounts (i.e. it must be connected to and talk to the internet). All the router firmware and the printer has been confirmed to date. all devices have been reset and restarted several times. However, if I try to activate HP Web Services for ePrint installation, I get the following error message: "connection error. Check the Internet connection. »

  After struggling with this issue for many months, including many discussions phone and email exchanges with technical support from HP, they finally sent me a replacement printer.  It works as advertised right out of the box.  I don't know what was the underlying problem, but the fact is that he couldn't be corrected with one of the solutions proposed in the discussions on this forum.  Apparently, there's HP printers out there with a lack of internet connection has nothing to do with a solution that is configurable by the user.  If you have one, then you will need to replace your printer.

  I can't thank HP for that.  They tried my patience and tenacity of the months before offering the only real solution.  They must know their products better than that and should have replaced my printer several months ago.  That being said, the tech person with whom I had most of my relationships, it was a nice guy.  I expect he's working under an edict on exhausting all possible tactics before agreeing to replace the unit.

  Good luck!

• HP LaserJet Professional P1606: HP Web Services Installation - connection error. Check the Internet connection.

  I try to activate the Services Web of HP but connection error. Check the Internet connection. .

  I use the static ip address with the address of the preferred DNS: 8.8.8.8 and 8.8.4.4 and it does not work.

  I changed to DHCP as it does not work.

  I have a ZTE home modem router connected to the printer.

  The link below should help you.

  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903

  Kind regards

  Oliver

• "Connection error. Check the Internet connection. "When you try to enable Web Services on HP 1606dn

  Error message "connection error. Check the Internet connection. " When you try to enable Web Services on HP Laserjet 1606dn.

  Operating system: Windows 7

  Thanks for the help,

  Howard

  Last UPDATED 21/07/13: after upgrading the firmware to the latest version, I could enable web services. Great help has this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw

  Thanks for trying to help.

  In my case, it did not help.

  I followed the instructions on this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw.

  The key was the update of the firmware, I think.

  Walter