HP Pavilion G 6 - no available internet connection after restore recovery disc

Similar Questions

• I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

  I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

  Debbie

  How do you know that the loss of your internet connection has nothing to do with the Windows updates? You must find the reason for the loss of the connection.

  How do you connect? Is a wired or wireless with a modem or a router? If a router is the router shared with another computer and this computer can connect to the internet? You need to determine if the problem is a fault on your computer or a failure to connect to your internet access provider?

  What error messages are reported?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Vista 32 bit loses the internet connection after about 10-15 minutes.

  I lose my internet connection after 10-15 minutes.

  The message says local access only.

  The only way to reconnect is to restart the computer.

  I use a devolo home plug network system. It is connected to a 210 of BT router travel.

  I also have a new computer recently bought and installed Windows 7. There is no problem with that.

  Maybe it's a coincidence, but the problem started only since the installation of the new model.

  
  

  Hello Cody C.

  Thanks for your reply. I tried this. It is said that the drivers are up to date.

  I go into the settings of power network and checked the box "turn off network card to save energy.

  Since that seems to be OK. Only time will tell if.

  Thanks a lot for all the replies. EXTED

• Unable to connect after restoring my computer

  Original title:

  Paul

  Why my tom tom used to connect after restoring my computer

  Hi Paul,.

  How do you try to download the drivers for your TomTom? He comes from a Web site?

  I suggest you run the peripheral hardware troubleshooter in Windows 7.

  You can see the help article following Microsoft on how to run the tool for troubleshooting hardware and devices:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also make reference to article Microsoft help at the following address:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Try the above steps and get back to us.

  Thank you

• HP Pavilion 15 t issues with Internet connectivity can be used under Windows 8

  So I just got my new HP Pavilion 15 t-e000 CTO Notebook PC last week, it runs Windows 8 & amp; It is a 64-bit.
  
  The only problem I've had is to stay connected to my wireless Internet. The connection stops at random intervals saying 'Limited' instead of 'connected '. I have to constantly disconnect and connect to my WiFi. It's particularly frustrating when I am trying to download something that lasts longer than a few minutes because the Internet connection cuts, and I have to start the process.
  
  I tried pretty much every "difficulty" people have posted that worked for some people. No luck for me. Sometimes it seems that he will stay connected and then I try to connect to a web page or download something and it turns off again.
  
  -Turn off the "Allow computer to turn off this device to save power" under power management in the properties of my wireless connection section... DID NOT WORK
  
  -By using the command prompt to reset the network card... DID NOT WORK
  
  -Running the network and Internet, and convenience stores something... Didn't WORK * update: if I run the connection test network via the HP help/support on my desk Center, while the connection says Limited, I get the notice that the 'default gateway was not available"and the router has been handed over to zero and issue fixed, etc. BUT if I run the test, while the connected said wireless, the test still says there is no problem. And although the test 'fixed' the issue, it does not because the Internet always cut again.
  
  -Updates Windows has installed new updates several times... DID NOT WORK
  
  -Forget the wireless network and set up as a new... DID NOT WORK
  
  -With the help of my computer right next to my wireless router... DID NOT WORK
  
  Used wireless router is: Cisco Linksys Wireless-G 2.4 GHz router to wide band as well as our network is WPA with a security code. We also have an Internet DSL SpeedStream thing (sorry, I don't know what it's called). The Compatibility Center said that this router is compatible with Windows 8. Other computers running Windows 7 and Windows Vista, iPhones, iPads and all work fine.
  
  My laptop uses Intel Centrino Wireless - N 2230 and the light is on and it still says ' device working properly "in the properties.
  
  For any help or suggestion would be greatly appreciated because I am at my wits end.
  
  Thank you

  Therefore, it seems that my problem with the limited Internet connection has been resolved. I didn't use my computer for two days and this afternoon, when I turned it on I was still having problems. However, I went to the HP Support Assistant, and it appeared that I had a few updates to download and install, so I let him do his thing. It took awhile because the Internet kept cutting out, but once the update for the wireless Intel have finally set, my connection is REMAINING CONNECTED. Finally!

  I don't know why when I went into the properties wireless it says "device working properly ' and when I tried to update the driver it says"your driver is the latest version"or something else.

  I suggest you just go to the HP Support Assistant and updates in the section "Updates and the updates of". It was a bit random, but touch wood my looks of problem connecting wireless to be gone.

  Hope this helps

  P. S.

  Here is a screenshot of what the HP Support Assistant (this is the logo of big question mark) main screen looks like:

  

• Pavilion 17 e020us: no internet connection after upgrading to Windows 10

  Hello guys,.

  I have a problem with the internet connection.

  My computer started to upgrate by itself for 10 windows while I did other work at my home. I was waiting until he finished.

  When it's done I realized that I have no internet, not only my wireless, but each of them, because I have a free to use wireless

  So, I start google how can I correct this situation. I did all the tasks that windows offer, typed the commands at the prompt command, installed the drivers, typed commands for dns, deleted cookies, rebooted my computer after I have finished the task and my internet still doesn't work...

  In the browser window, I use chrome and internet explorer, it says:

  "This site is not reachable.

  YouTube.com address DNS server is not found.

  DNS_PROBE_FINISHED_BAD_CONFIG ".

  As I said I typed the commands at the command prompt to DNS and delete cookies and it did not work.

  Please, help me to solve this problem with my computer and the internet.

  I'll be very happy)

  I have an e020us windows, 64 GB, laptop HP Pavilion 17 10.

  Hello:

  There are W10 drivers for the wireless card that your laptop model.

  This is the latest available driver...

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74843.exe

  If the wired network adapter is not no longer works, see if the ethernet W10 driver works for you...

  This package provides the driver for the Ethernet Realtek controller in portable models supported and operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72934.exe

• Pavilion dv7-6b55dx: loss of internet connectivity wireless with Win 10 update

  I have a Pavilion dv7-6b55dx notebook with Intel Centrino - N6150 wireless network card. I've recently updated to Win 7 to win 10 64-bit.  The first negative consequence is the deactivation of my wireless internet connection. The without wire/switch market stop on the keyboard is more worked as planned but simply tilted airplane mode on or off.  I followed HP troubleshooting for wireless connectivity problems associated with Windows 10 improvements, including the reinstall the NIC driver wireless, without any positive result.  It seems that 10 Windows does not recognize network N6150 map.

  Anyone know if there is a fix for this problem (Microsoft? HP? Intel?) In the meantime, I came back to the Windows 7 operating system.  If there is no patch or another solution at this moment I may decide to go with a wireless USB adapter, but prefer not to do this, if possible.

  I did not have a facility clean, but simply ran the standard upgrade ensuring once again I did it using a Wi - Fi and ethernet not.  It worked very well - fully operational wireless connectivity.  Thanks for pointing out the importance of having wireless enabled when you upgrade!

• Pavilion h8 - 1287C: Desktop abandons Internet connection. Ping helps a little.

  PC drops his Internet connection.  The Internet connection icon reset solved the problem.  But 10 times a day happens to be a little too much.  The PC has its second motherboard and a new piece of network adapter. Other PC no experenience not the problem as often.   Currently I use a cable between the pc and the router-modem connection.  He falls always on Internet, particularil so I let it run at idle for a while.

  Thanks Dragon-fur...

  The gateway is only a couple of years, but it can still be the cause.  Other router ports work better.  Ping the router does no error.  I have the ping set every second.

  Kind regards

  Buck

• Lose Internet connection after sleep/standby/hibernation Mode

  I recently bought a new HP Pavilion Elite e9105z CTO Office and migrated from Win XP to Vista Home Premium x 64, with a NVIDIA nForce 10/100 Mbps Ethernet Controller.  Whenever I come off standby or standby mode, I lose my Internet connection and have to restart my system or run Windows Network Diagnostics to repair the network adapter settings.

  I tried several remedies available on Internet; but unfortunately, nothing has resulted in a permanent solution.  I contacted my service provider ISP (Mediacom) wonder if it was / is a problem with the firmware used to my cable modem SBV5220 support (for example, incompatibility with Vista) and they said there is no.  So far, I have:

  1. Reinstalled NIC driver.
  2. Power options controlled and reset with USB CDC.
  3. Apply the update for Windows Vista (default gateway setting is lost) for x 64 systems (KB933872) - response that update does not apply to the system.
  4. Reset the IP configuration via the Cmd line.
  5. Tab power, unchecked the box that shuts down the adapter then power save comes into play.

  Access the computer several times a day and having to reset Internet connections became extremely aggravating.  I hope there is a solution.  Thanks in advance for your help.

  Back from a 3 week stay, during which my office has been extinguished, my local internet connection would come is no longer active when he came out of hibernation.  The without line worked, but the local connection would not work unless physically, I unplugged the cable from the router (Netgear) and reinserted it.

  After several days of frustration, I went into the Manager of devices, unchecked ethernet optional adapter "allow the computer to turn off this device."
  This seems to have cleared up the problem, at least until now...

• Satellite L450D - 11G - no internet connection after reinstalling Win 7

  I just installed win 7 pro 64-bit so I can increase the RAM up.
  Initially I had win 7 Home premium SP1.

  I have a Toshiba satellite L450D - 11G PSLY5E.
  I downloaded all the drivers from Toshiba on a memory stick from a source different and then installed on the Toshiba.

  Then, I opened all the drivers one by one and ran each driver individually.
  In Device manager there is a yellow exclamation next to the network controller.

  I have a home network setup that I can connect to the net using phones, tablets and other portable computers.
  The icon on the laptop says NO CONNECTION, NOT of CONNECTIONS AVAILABLE.

  Y at - it a special order to install the drivers. I have install in the order in which they were downloaded.

  Any ideas anyone. TA

  In Device manager there is a yellow exclamation next to the network controller.

  Probably the essential WLan/LAN drivers are not installed properly.
  Do you have problems with the internet connection using WLAN and LAN?

  I recommend you to check if the correct drivers have been installed.

  The wireless network card should be Realtek RTL8191SE 802.11bgn

  Built in LAN module is published also by Realtek...

  so in both cases you need a Realtek drivers

• No internet connection after installing the update of security for Windows Vista

  Security updates for Windows Vista released October 13, 2009 and November 10, 2009 still an Internet connection limited Connectivity/No. Did not help uninstall updates. To do the system restore to solve the problem. Why is this?

  drusecord,
  First thing is to update your network drivers for your system.  Then see if after the update of safety, you have a problem.  If you do, I would do the following:

  Disk error checking

  System File Checker

  Then if there are updates that you already have, but are always available to consult this information:

  Troubleshooting Windows Update: offered on several occasions to update

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Difficulty of internet connection after Security Tool Virus

  My mothers computer caught the security tool virus.  I finally had to reload Windows XP and Windows XP now works, but I can't connect wirelessly to the internet.  She got ahead through Linksys.  When I look under the modem it says connection cable to cable.  I'm assuming I erased the other information that I need to connect on the internet.  Any help will be appreciated.

  Here are some ideas of the fallout that occurs in your Internet settings after some infections have been deleted and how set things straight.

  Depending on how you removed the infection (the removal procedure is well documented), sometimes there are a few other things to do later.

  Some malware knows that you will try to get in the Internet to try to find a hair removal method if it adjusts things on your system to prevent you to do so.  Even if you delete the malware using several analytical tools, tools cannot tell if the Internet settings have been modified by malicious software or put you that on purpose so he leaves the only parameters (and your system cannot connect).

  The malware hope that you will not be able to understand these things and give up and just reinstall your XP, do an install repair or by using a Restore Point.  Sometimes it breaks these things too, but you can usually remedy without the use of one of these methds (which aren't really patches at all)...

  If you have reinstalled XP, this may not apply to your situation, but it would be a good start:

  We will check your network connection properties.

  Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.
   
  Click Start, run and enter in the box:

  Inetcpl.cpl

  Click OK to launch the Internet Properties Control Panel, choose connections, LAN settings.

  Or, in Internet Explorer click on tools, Options, connections, LAN settings.

  These settings control your Internet access for all browsers.

  On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

  Automatically detect the setting checked =
  Use the automatic configuration script = unchecked
  Use a proxy server for your LAN = not checked

  Make changes, then click OK, OK to save the settings.

  Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

  If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties.

  In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

  In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

  Obtain an IP address automatically

  Get a DNS server address automatically

  The rest of the options on the screen should then be grayed out/not available.

  Make changes, then click OK, OK to save the settings.

  Restart your computer and test your connection.

  If it still does not work, check your settings are still in place after a restart and then release and renewal IP of your network device configuration settings.

  Click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window, and then type the following commands:

  ipconfig/release
  ipconfig / renew
  output

  Restart your computer and test your connection.

  If this does not work, follow these steps:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Internet connection after installing vista

  I changed the hard drive of my labtop. Then I installed a vista business on my labtop but it can not connect to the internet. I tried this way:

  Control Panel, network and internet, set up a connection or network, connect to the internet.

  But this message: 'Windows doesn't detect any network hardware. "

  Please let me know how this windows vista able to recognize my internet connection which I use through my rotor for other computers. It cannot detect my wireless also. I wasn't expecting such a problem with vista before starting the real work.

  Hello

  Using another computer / laptop go to the website of the manufacturer of your laptop > search for a driver and software download section > key in your laptop model munber > look for the Vista operating system to the correct address > find drivers for it > download and save to a Flash Drive > transfer and install them in this laptop.

  If the manufacturer of the laptop has no Vista driver available for this model of laptop, we can not help you.

  See you soon.

• NB550D - no internet connection after instalation of Win 7 64 bit

  Please help - so frustrating:

  Have my NB550D upgraded Windows 7 Professional 64 bit to take advantage of 4 GB of RAM

  Now, I have no internet connection and cannot figure out what to do.

  I downloaded a driver, but says it cannot install because there is no card INTEL (R)

  Help, please!

  Thanks for the clarification!

• Apps to say no internet connection after 9.3

  After the upgrade to 9.3 different applications like hay day and yahoo weather, say I have no internet connection, but the internet is fine. My daughters works very well and does not say that, and we are on the same internet connection. It's never happened before. I was wondering if anyone else knows it after the upgrade or just me? Is there a solution? I know that's not my internet. I'm on an iPad 3

  Tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then see if these apps work as it should.

  Sometimes, the network settings on an iOS device can be damaged during a update.

  If this does not help, delete the apps that are no internet connection then re download from the App Store.