do not install the software for PSC 2355 using windows 7

Similar Questions

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• Can not install the software for my HP Photosmart Plus B209 on Windows 8.1

  I could not install the driver/software package downloaded for my HP Photosmart Plus B209 Printer on my new HP laptop w/Windows 8.1. I get an error message that the following file is missing; \AppData\Local\Temp\7zS4D84\Setup\hpzshlaut4.0... I have 3 other computers of the OS windows 7 that I had no problem with the printer using this same download driver/software package. Any help you could offer would be greatly appreciated.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Error - Lifecam3.60.exe is not a valid Win32 application. Failed to install the software for Microsoft VX5000 webcam.

  Original title: impossible to install the software for vx5000 webcam.

  I tried to download with Firefox; the first time it shut down my computer, the second time, he showed, it was the download of files, but after an hour more, I let down, then switch to IE.

  I tried to install Microsoft vx5000 webcam software in win xp.  has no charge. I then downloaded last update 3.6 Lifecam and I get the message "Lifecam3.60.exe is not a valid Win32 application.   What to do next?

  Hi golferfrankholeinone,

  You can follow this link and check if it helps.

  Troubleshooting, install the Intellipoint or IntelliType software, LifeCam.

  Hope the helps of information.

  Please post back and we do know.

• Impossible to install the software for printer AIO C6250

  Whenever I try to install the software for my printer C6250, I get an error message saying "unable to find a specific file" the file is C:\Users\DrAnth-1\Appdata\Local\Temp\7zS5FBE\setup\... \blocksysus.

  I can't find this file on my computer.  The installation stops and I'm back where I started.

  Can someone help me?

  Tony, you updated to Vista? To run the cleaning brush to make sure that we get rid of everything left on the software. Heres how:

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76043-1&cc=us&DLC=en&LC=en&OS=4063&product=3308554&sw_lang=
  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://www.Adobe.com/support/flashplayer/downloads.html
  9 download drivers and full software features
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76043-1&cc=us&DLC=en&LC=en&OS=4063&product=3308554&sw_lang=
  10. run the download to reinstall the printer

  Let me know if this solved your problem.

  Thank you!

  Sean

• I can't install the software for my printer of series e-all-in-one-hp deskjet 3070 on my mac.

  Hello

  I just bought an hp deskjet 3070 series e-all-in-one printer and it says that I'm unable to install the software for it because it requires 10.6 or below. Any suggestions on how to get this up and running?

  Thank you

  Tim

  Hi Tim,.

  The CD that came in the box is not intended for Lion mountain as the printer was made before the release of the OS.

  You can download the latest version of the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107189-2&cc=us&DLC=en&LC=en&OS=219&product=5068754&sw_lang=

  After completign the installation, be sure to restart and update the software by clicking the Apple icon, then software updated.

  Shlomi

• Impossible to install the software for 1536dnf

  I need assistance with the installation!

  When I run the installer for hp 1536dnf he takes out, only one after that:

  

  I get this message:

  

  In the 'problem details' are the following:

  Description:
    Stopped working
  
  Problem signature:
    Problem Event Name:   CLR20r3
    Problem Signature 01: hpbcsiinstaller.exe
    Problem Signature 02: 3.0.3.5253
    Problem Signature 03: 4cf952f9
    Problem Signature 04: hpbcsiCommonTools
    Problem Signature 05: 3.0.3.5253
    Problem Signature 06: 4cf9529f
    Problem Signature 07: 366
    Problem Signature 08: 4e
    Problem Signature 09: System.TypeInitialization
    OS Version:   6.1.7601.2.1.0.768.3
    Locale ID:    9242
  
  Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
  
  If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
  

  I actually do not need this software for printing, because the printer works fine on the network, but I need a way to analyze things on network and if I understand the only way to do that is through this software.

  I tried to download things from the support page, and nothing works.
  I even tried the fix of AMD processor, because there seems to be a similar error, but still nothing.

  I explored the installation files, I managed to install the application called "HP LJ M1530 Scan", but it does that if the printer is connected via USB, on when it is not then I get this error:

  

  Here is my configuration, if that helps:

  

  Additional information:

  The printer is brand new, and this error occurred on first installation. And as I say, printing works fine with the network drivers, but scanning is the problem.

  Please help, love this product, but I can't use USB whenever I need scanning.

  Thanks in advance

  Milos

  Here is therefore the deal about the origin of the subject "cannot install the software for 1536dnf.

  I had to remove some drivers duplicate on my pc, so I ended up remove bad. So I deleted everything in order to install a new copy, but the same problem occurred even with the new user.

  If I well on it and eventually find a real solution.

  And it is here:

  1. Press Start
  2. In Search type: msconfigand press on enter
  3. On the general tab, select Selective startup with Load system services and load original verified boot
  4. 
     Press Ok and restart the PC

  After the reboot, you will be able to install the software. When you are finished. Do the same as above, except for step 3, where you Normal start.

   

  Cause: I think that his coliding with some software "no stock" on my PC. That one is, given.

   

• Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  This update didn't install when I used Vista and is still unable to install now, I updated to Windows 7.

  Have searched for a solution for months with no result. Reason why I updated.

  Any help much appreciated.

  DOUGY,

  Microsoft SQL Server 2005 Express Edition Service Pack

  Post here for assistance:

  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  --

• Complited download but it does not install the software

  

  Download complete but do not install the software.

  Hi juan,

  Double-click the downloaded file to start the installation.

  By default, your product trial installer should start automatically when the download process and extraction is complete. If installation does not start automatically, navigate to the folder where you saved the downloaded trial software and launch the installer. (See where are my downloaded products?)

  Kind regards

  Rave

• I can not load the software for my 2610 HP all-in-one cd in my laptop with windows 7

  How to obtain and install the software on my new laptop windows 7 to exploit my all-in-one printer 2610? I also will always be able to control the desktop of windows xp printer?

  Thank you very much. Tonight has downloaded the software from the link you sent & now able to print on both computers.

• HP dc 7800 how can I install the driver for serial port pci Windows 8.1

  HP dc 7800 how can I install the driver for serial port pci Windows 8.1 Please help

  Hello:

  Download and install the W7 AMT driver.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78665_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Re - install the software for the printer C6280 all in one... get a "file not found" error message

  you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

  the 7z256315 folder does not exist on the hard disk.

  I also have a message that it cannot find PS_A10_02_software.msi.

  Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

  I hope you can help

  Thank you

  Charlie

  Hi cberistain,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print and scan?

• Impossible to install the software for the support of HPs Web site

  Hello

  Whenever I try to install the software from the software page and drivers specific to my model, I get an error message that says:

  "Your system does not meet the requirements of the operating system."

  I don't have this message before the installation of all software/drivers. It is only since the duty set my OS.

  I am running Windows 8.1 64-bit.

  Hello @TysAri08,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems installing the HP software and need help. I'd be happy to help you, but first of all, I encourage you to publish your product for your computer number. I'm a link a HP Support document below that will show you how to find the number for your product. Because with that I can give you accurate information.

  How can I find my model number or product number?

  Will you please re-post with the information requested and I would be happy to provide assistance. Thanks for posting on the HP Forums. Have a great day!

• do not install the driver for XP photosmart 5510

  I tried in vain several times to install the driver for my refurbished XP for my laptop HP photosmart 5510. I said I want to install via radio - he finds the printer and lets me select - then it starts the installation.  It gets about two-thirds through the bar of "installing network printer." "and crashes.

  I let it rest, go to walk my dogs, prepare dinner, and it moves of there.  When I click on cancel, it crashes during the phase cancellation and I'm relegated to "force quit" process.  It's annoying!  All I want to do is wireless printing.  Scanning the computer would be an asset.

  BTW, I had NOT of PROBLEMS installation on laptop of my wife under System 7.

  Help, please... Thank you

  Docswan

  Hi docswan,

  I can't wait to hear that you are experiencing installation problems.  The following steps may resolve this problem. You can also view documents related to this issue by clicking here.  If you are unable to install the full features software, a generic driver can be installed via windows to enable printing only.  Here is a link that will provide the steps to do this.  Click here

  1. connect a new printer.

  2. the software freezes when "control network.

  3 allow software to sitting there for 3 minutes (to fill in the background).

  4. go into the Task Manager process tab.

  5. complete the process of HP network Communicator.

  6. This should push the software to a point to choose wireless or Ethernet.

  7. Select Ethernet or wireless depending on connection.

  8. Enter the IP address manually in the appropriate box.

  9. the software freezes probably during the 'network of control' all or part way through.

  10 allow software to sitting there for 3 minutes (to fill in the background).

  11 go into the Task Manager process tab.

  12. end of the process of HP network Communicator.

  13. This should push the software before saying that the printer cannot be installed correctly, but can be installed via the IP address.

  14. click "continue".

  15. the software should continue and give a green check mark.

• CAN´t install the software for mouse Hyperion G402

  I can´t install the software, whenever I get the message: 'this software is not compatible with your operating system', I made sure I downlaoded the correct software for Windows 7, 64-bit. I called Logitech and I was told that it was a matter of Microsoft. Can someone help me please?

  It is not a Windows problem, but clearly something is wrong, don't know why the software is not installed for you well.

  I use software LGS on Win7 64 bit for years (G13, G710 + and a new all current G502 to run on)

  version 8.56.109 software atm).

  -Are you logged on as administrator?
  -You have downloaded LGS 8.56.109 or 8.57.145?

  -There is a firmware update for the G402 on the next page, which can help

  http://support.Logitech.com/en_US/downloads

  -You can also try to install in safe mode (press on and hold F8 - or I believe F2 on some motherboards - before Windows logo appears).

  clean boot or-

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  -I see that there are several threads on the forums of Logitech about your problem however.

  Assistance telephone logi is perhaps not as good as the forums.

  -If no suggestions on the existing threads can help you start your own.

  Maybe you've already been there, but--

  One of the suggestions on this thread is that Firefox will automatically download the 32 bit version.  But I use Firefox

  and no similar problems. If the file name ends with _x64 then you obviously do not have this problems either.

  .