do not join a dimension or WARNING logical source is

Similar Questions

• Coherence WARNING: logical dimension table [39008]... has a source...

  Hi well think for playback.
  
  I have a problem (which is quite common that I saw, but I could find a solution that solves my problem again) with coherence.
  
  My physical layer looks like this:
  
  Table_a
  Table_B
  Table_C
  Table_D
  Table_E
  
  In the business model, I have all of same tables and the following joints in the logical scheme of the Table:
  
  -> Table_B Table_a
  Table_C-> Table_A
  -> Table_A Table_D
  Table_E-> Table_A
  
  The consistency check is delivered two warnings:
  
  Warning
  Source of the logical table
  Table_a
  [39008] logical dimension table Table_A has a source Table_A who do not adhere to any source of fact.
  
  Warning
  Source of the logical table
  Table_B
  [39008] Table_B logical dimension table has a source Table_B who do not adhere to any source of fact.
  
  While working in BI answers, I managed to recover all the data tables C, D, E. But for tables A and B I can retrieve only the columns that are defined in the join Table_A-> Table_B. All other columns to deliver the following error message:
  
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 14026] Unable to navigate the requested term: Table_A.Column_X. correct metadata consistency warnings. (HY000)
  
  If I get one column from Table_A and one from Table_E, I have the following error:
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 15018] Incorrectly source the logical table set (for the fact Table_E table) does not contain a mapping for [Table_B.Column_X]. (HY000)
  (Yes its Table_B not one)
  
  I would like to correct this mistakes but do not know where the problem is hidden.
  
  Any help is appreciated with kindness.
  
  Evgeny

  Table_a >-Table_B
  Table_a >-Table_C
  Table_D >-Table_A
  Table_E >-Table_A

  It's seems that D and E are fact tables joined to a dimension. A has dimensions B and C, this is attached to itself.

  So the only facts are D and E, is that at the time? A is the size?

  D and E joined in A and A are the joints B and C, right?

  Concerning
  Goran
  http://108obiee.blogspot.com

• [39008] logical dimension table has a source that is not everything

  Dear reader,
  
  After deleting a table of facts of my physical layer and remove my business model, I get an error: [39008] logical dimension table TABLE X has a source which does not join any source made the TABLE X. I have another table of facts in the same physical model and the same business model that is attached to the ARRAY X in the physical and the business model.
  
  I can't understand why I get this error, even after the removal of all joins and rebuild joins I get this error. When I look in the 'Manager of Knuckles' these joins in logical but also physical model exist, but with consistency check, it warns me of a bond [39008]. When I ignore the warning and go to the answers and try to show the TABLE X (not done, but dim) it gives me the following error.
  
  ODBC driver returned an error (SQLExecDirectW).
  Error details
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 14026] Unable to navigate the requested term: TABLE X.column X correct metadata consistency warnings. (HY000)
  Publ. SQL: SELECT the 'subject FROM saw_0' X X.column TABLE ORDER BY saw_0
  
  There is a * 'special' * thing about this join. It is a complex join in the physical layer, because I have to make one between the dates and a smaller or equal to the current date as this example of dim.date between fact.date_begin and fact.date_end and dim.date < = current_date. In the business model, I had an another complex join
  
  Any help is appreciated kindly!

  Hello
  Did you indicate the level of content of the fact table and mapped it with the dimension in question? Ideally this should be done by default since one of the main features of the Oracle BI is its ability to determine which source to use and the specification content level is one of the main ways to do this.

  One other quick thing you can try is to create a dimension (hierarchy) where it is not already present. I had a similar problem a few days back and the warning had miraculously disappeared by doing this.

  Concerning

• Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

   
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
   

  Hope this information is useful.

• 1131 AP to WLC 2106. IP address is assigned, but will not join.

  the installer is: 1131 AP connected to 2106 WLC connected to the xp machine to access the console windows. for testing purposes only are not connected to the network/internet still.   the WLC will be connected to the internet eventually.
  Scope DHCP is configured and address. I can ping the management WLC AND the IP of the console of the AP ap-Manager, but can not ping the AP from the WLC console.

  I read - troubleshoot not joined Lightweight Access Point is not a wireless LAN Controller and most all other tech notes.
  I can use the commands of DEBUG on the AP but I don't see any output on the screen or to capture or see the WLC console connection IE.   Debug lwapp package activate or activate debugging capwap package but there is no output that I can see and search.

  Someone at - it ideas? Happy to post debugging logs if I can get.

  Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.4(21a)JA1, RELEASE
  

  This is your culprit.   The IOS that you are running is an autonomous access point.  You need to load/run the IOS LWAP.

  ... And you don't need to be a Nobel Prize winner to convert AP LWAP autonomous access point.

  1. download the IOS correct.  The IOS LWAP has the prefix "RRs" in its file name.

  2. copy the "RRs" image in your access point using the command ' archive download-sw tftp: / /.tar.

  3. make sure that the boot variable changes for a startup to the image of "RRs".

  4 charge your AP.

  Be sure to note our useful messages.   Thank you.

• Can not join the domain of the Hyper-V virtualized system

  Hello!
  I have a domain controller active directory (adserver) in my ws12 network, and I have another physical server (server) also runs ws12 who is able to join the domain, but the virtualized systems can not.
  DNS and other settings are ok (identical to what is implemented on the server) and made the flush and registerdns steps. I even tried to add the host name of the dc and the name of FQDN for hosts files.
  I type in the domain (gczinege) and I'm able to type in the username and password. After awhile the virtualized pc SAIS: could not join the domain - not found network path
  I feel there is something with the installation of hyper-v or network server.

  Thank you all.
  I solved the problem, first I was promoting to a domain controller and to be in the area and that the installation of hyper-v after everything went well.
  Best regards.
  g

• Discover the State of the agent (18) composer initialization error: could not join the domain (expected 815 seconds)

  Hi all

  My Active Directory, View Manager, composer and vmware vcenter are all on windows 2008 R2.

  I took a spanshot of Windows XP SP3 with DHCP setting, installed vmware tools, see agent installed, firewall disabled, the Member of domain etc.

  When I tried to clone the snapshot XP to several XPs with the pool creation process it get error in personalization with error, below

  *03/10/10 18:01:49 IST: View Composer agent State (18) initialization error: could not join the domain (expected 815 seconds)*.

  Help, please.

  Thank you

  Selim Desai

  VCP410

  Take a look at http://communities.vmware.com/message/1613937

  the solution has been http://support.microsoft.com/kb/944043/en-us

  André

• Virtual Center Server not joined to a domain

  The environment is ESX 3.5 update 5 and Virtual Center Server 2.5 update 5.

  My question is; Virtual Center Server 2.5 can be installed on a W2003 server that is not joined to a domain?

  If the installation is possible what are the disadvantages and consequences?

  At a later date, the server can be attached to a field and Virtual Center updated accordingly? Thanks,-Jeff

  My question is; Virtual Center Server 2.5 can be installed on a W2003 server that is not joined to a domain?

  Yes.

  If the installation is possible what are the disadvantages and consequences?

  Depends on if you are using ad groups / users to connect to vcenter.  Otherwise, you must use local accounts for vCenter to provide user access to your vCenter cluster.  Adding the vCenter in the field would facilitate this in the future add / secure users.

  and Yes, you can join vCenter to the domain at any time, but it requires a reboot...

• manage the server could not join the multicast cluster)

  Help me please...
  I have a problem with my cluster (multicast).
  When I started managing the server, I found the error message "could not join the dizzycluster address 239.192.0.0 cluster due to: java.net.SocketException: option to set the error..."
  I don't know what I'd do,

  Make sure that the multicast works between your two servers using this utility of Weblogic.

  http://WebLogic-wonders.com/WebLogic/2010/12/07/multicast-test-on-the-network/

• TODATE function used on a dimension that is logically flakes.

  Guys,
  
  Please help me solve the error below. Anone explain why do we get this error and how to solve?
  
  ODBC driver returned an error (SQLExecDirectW).
  Error details
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 171039483. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 22045] To DATE function on a time dimension that is logically flakes. (HY000)
  Issued SQL: SELECT "Time". "" Tax Saw_0 Quarter ","facts - Budget. " "' Total operating expenses ' saw_1, '-real facts." "' Total operating expenses ' saw_2, 'facts - Budget." "' Total operating expenses '-'facts - actual spending. "' Total operating expenses ' saw_3, 'facts - Budget." "' Total for a YEAR of operating expenses ' saw_4, '-facts". "' Total for a YEAR of operating expenses ' saw_5, 'facts - Budget." "' Total costs for a YEAR '-'facts - actual spending. "" Total Saw_6 of one year's operating expenses ", AGGREGATE (BY saw_1), AGGREGATE (BY saw_2), AGGREGATION (saw_3 OF), AGGREGATE (BY saw_6) OF"Finance - Budget GL and expenses"WHERE ((Time.")) "Fiscal Quarter" < = VALUEOF (NQ_SESSION. ((' ' CURRENT_FSCL_QUARTER ')) AND (Time. "" Fiscal quarter "> VALUEOF (NQ_SESSION. ((("" FSCL_QTR_YEAR_AGO "))) AND ((«Segments WFS».ORG_NUM = VALUEOF (NQ_SESSION.))) ((("" OU_ORG "))) AND ('GL Segment1". ("' The ID of the hierarchy ' = 'THOMAS') AND (Time.Status = ' closed') ORDER BY saw_0
  
  Thanks in advance...

  To implement a function to this DAY and there are, you need in a single source of logic.
  either you cannot extract data from several tables to implement the TIME dimensions.
  Therefore, make sure that you have a specific table to represent the time dimension.

  Mark answers quickly.

  J
  -bifacts
  http://www.obinotes.com

• Several Sources of Table unique logic vs logical Source of Table

  OBIEE 11 g. I'm totally confused. Can someone help me with the following for me.
  
  I saw sources of logical table used in 2 ways. I have a table of 2 sources: CUSTOMER & ADDRESS. In the physical layer these 2 tables are related by _ID CUSTOMER in a 1:M relationship.  for example, a customer can have many addresses.
  
  Scenario # 1: MDB two tables form a logical table called CUSTOMER with 2 different sources logical tables that are CUSTOMER and ADDRESS.
  
  Scenario # 2: MDB two tables form a logical table named CUSTOMER with 1 table logic source called CLIENT only.
  
  What is the difference between the above 2 scenarios and what is the best to use to create the logical table source.
  
  Kind regards.

  Scenario # 1: MDB two tables form a logical table called CUSTOMER with 2 different sources logical tables that are CLIENT & ADDRESS.
  --> In this case; based on the selection of source columns is defined in the physical request
  possible case would be customer, ADDRESS and ADDRESS of the SUBSCRIBER &
  --> Of standardized scenarios used in
  --> BI uses intelligence according to the settings on the content tab

  Scenario # 2: MDB two tables form a logical table named CUSTOMER with 1 table logic source called CLIENT only.
  --> In this case; CLIENT properties-> general tab used both ADDRESS CUSTOMER & in your physical query two tables regardless of column selection
  --> Standardized scenarios used in
  --> Forcing BI to follow our path, since we usually set the settings on the content tab

  Hope this helps

• Error [38133]: do not join any other logical table

  Hello
  Is there a way to avoid this error. We have no obligation to join the table with any other table. The customer wants to use
  the OBI answers on one feature table. Without joins necessary or wanted. Some hidden box escapes OBI join bond?
  Thank you

  Hello

  See the link below.

  Add a simple table without one logical join to another table (OBIEE 10 g)

  Mun

  Report on a single table: just drag and drop the table twice from the physical layer to the layer of busines model. Then define a complex join (just drag and drop a line) between tablex and tablex #1. Set a key in the dimension table (white folder).

  You can then put one of the tables in a presentation file and report.

  Hope this helps

  Thank you
  Satya reddy ranki
  http://satyaobieesolutions.blogspot.in/

• Being not recognized in dimension 8400 DVD drive

  Hi all

  I have a problem with my DVD drive in my dimension 8400 (about 3 years)

  I can open the DVD player and insert DVD/CD but they are not recognized,

  My computer is not present DVD player, there is no CD/DVD players present also in the management of devices.

  I think the DVD player I have is the Philips DVD 8601 HH 16 x DVD + RW,

  I had a similar problem about 1 year ago, but that has been fixed by updating the firmware/drivers. (although the DVD player doesn't "disappear" from my computer, it comes to refuse to play the disc at the time)

  Im not a computer newbie, so I tried several things to try to make it work:

  http://www.dellcommunity.com/supportforums/board/message?board.ID=dim_cdrom&message.ID=138730&query.ID=270189#M138730 I did steps 1-3 and 5, and nothing has worked.

  Someone at - recommended step 4 too? Question about step 4: you have to clear the CMOS chip memory AND reset the default settings of the BIOS Setup? It was not clear from the guide on this forum.

  I tried to download the updates of the Firmware, but when I tried to update it says "Device not found", logic, because the device is not - where on my computer.

  That's my problem.

  Thank you very much if anyone can help me

  Perhaps the DVD player is just broken and I need to get a new one, but the fact that I can open and close the lid and the light Burns gives me hope that its stil alive: P

  Concerning

  Rowan Schaap

  
  

• How to join three dimension tables

  I have a separate scheme, which consists of only 3 tables (all three tables has dimension fields and (Protected fields = text fields, done = measures))
  How to deal with this type of situation in RPD.
  
  Ex: table A, table b, table c
  
  Table must join with table b on many a relationship.
  Table c must join with table b on many a relationship.
  
  
  Someone suggest me what is the best way to deal with this type of situation.do I need to create dimensional hierarchies for the three tables? Or can I consider only b as a dimension table and rest 2 consider a fact?

  This is not possible. According to atleast dimensional modeling, you should have a table of facts.

  Dimensional tables can be attached to one of the other if it have snowflakes (sightly standard table).

  If you start things of DWH.

  Kind regards
  -----------
  Kishore.

• Not load the virtual bus: warning setupDiEnumDeviceinterlaced() return code 259

  When I start my computer, I'm getting following error messages.

  setupDiEnumDeviceinterlaced() 259 return code

  followed by
  Virtual bus not loaded.

  Someone knows it please, what is this error and how do I get rid of him?

  Thank you

  Lee

  To be honest, this is the first time I see this WARNING
  If goggled a bit and found this MS article on error message: Virtual bus will not load

  http://support.Microsoft.com/kb/921440

  Looks like the NIC (LAN or Wlan card) might use a virtual bus driver who could not be loaded

  However, this story sounds really strange first MS article talks about Win XP and Windows Server 2003

  I guess that your laptop computer with Vista

  My recommendation is simple; Take the Toshiba Recovery disk and try to define the notebook back to factory settings. Then check if the error appears again