Error [38133]: do not join any other logical table

Similar Questions

• MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

  MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ----------------------------------------------------------------------

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How the identity if one table used only by synonyms and not by any other subprogrammes in a schema?

  Hi people

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  The ALL_DEPENDENCIES view has hierarchical information based on object_id

  The view object has the object_type.

  Create a hierarchical query on the first view and attach it to the second view.

  Or you can use the utldtree.sql file in the installation of the DB admin folder. Comments initially show you how a hierarchical query based on the object type.

• My subscription has ceased, even I made my last payment on 22.03.2016. My Plan marked as expired. The system is not providing any other solution but only update my payment information, I did. Nothing seems to happen. Online support is disabled. I have

  My subscription has ceased, even I made my last payment on 22.03.2016. My Plan marked as expired. The system is not providing any other solution but only update my payment information, I did. Nothing seems to happen. Online support is disabled. I have no choice but to ask here for help! I need to work, I need to work now!))

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Image is described in IE, but not in any other browser

  This image of type "Facebook on Waterkeeper" is not supposed to be exposed but is exposed when I display in IE.  It does not reach any other browser and should not.  Anyone know why this is happening?  http://www.iewaterkeeper.org/  Thank you, any help is appreciated.

  Add the following line at the end of your stylesheet

  an img {border: none ;}}

• Canon MP620 install launches the error message "Could not load any file of resource".

  I reinstalled Windows XP on a fresh partition a few days previously.  I applied SP3 and all updates of windows until no updates are available.  I applied the motherboard and video drivers & s/w.  Windows updates applied an update to the CPU driver, if I'm not mistaken.  I didn't have many other things still installed at this point beyond Panda, office and a few utilities simple, affluent (Notepad ++, Total Commander, etc - things without installs pretty simple).

  When I try to install the printer driver Canon MP620 (md8l-victory-mp620-1_04 - ea24a.exe, for use on local network), after the one the switch over and half dozen clicks later software is about to install but then get the following error:

  INSTALLATION PROGRAM. EXE

  Unable to load a resource file.

  I contacted Canon support.  Not surprisingly, they said it wasn't their problem and that my system was to blame.  To be honest, I was able to run the same configuration file, without getting that error, on another machine.

  ... Any other relevant details of the _potentially_...

  I already had a problem with es.dll (do not have the details on me).  I got an error message (twice) which suggests that it might be corrupted, so I ran sfc/scannow.  After clicking on several attempts on my original Windows XP disc in the analysis, it finally finished without reporting problems or corrective action.  Never seen the error once again since.

  ... then...

  I can't find all the other tracks on the internet that take me somewhere.  I used to be quite a geek, but I think that I'm not dumber as I get older.  Without a solution, I can't use this printer.  I need to use it as both a printer and a scanner, so I would use Canon software provided.  Can anyone suggest it please what else I should try?

  Other details which may be relevant:

  -Windows XP Professional Service Pack 3 (build 2600); the system is up to date with windows updates

  -You try to run md8l-victory-mp620-1_04 - ea24a.exe (network for printer Canon MP620 multifunction driver) downloaded fromhttp://www.canon.ca/inetCA/serviceDetail?m=load&id=5&sid=27&mid=0002200452&type=D&opt=1

  -I have not found a driver for Canon in the 'Add printer' wizard standard who recognized the printer.

  Hello

  ·        What version of the XP operating system do you use? 32-bit or 64-bit?

  I suggest trying to install the printer using the wizard for adding and deleting printer and check if you are able to install the printer on the system or not.

  What Add Printer Wizard does not complete the installation of your printer

  http://support.Microsoft.com/kb/823447

  It could be that an application is in conflict with the installer. I suggest to perform a clean boot on the system, then try to load the drivers from the printer and check if the problem is resolved.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: I suggest you uninstall the drivers that are already present on the system and the installation of new drivers on the system from the link below.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp620#DriversAndSoftware

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• can not start any other os that mac os install dvd

  I can not start any version of windows or ubuntu on my mac pro 1.1.

  Tried:

  Windows 98

  Windows 2000 Professional

  Windows 2008 Server

  Windows XP home

  versions of Windows 7 Professional 32 & 64

  Ubuntu 10.04 lts 32-bit

  Ubuntu 14.04 32-bit and 64-bit

  most will show a cd when you hold down the ALT to start up

  and those that I could start supposibly to give me a symbol of apple in alternation with the no symbol.

  searching the Internet, it seems many people have this problem.

  Details of my machine:

  Model name: Mac Pro

  Model identifier: MacPro1, 1

  Name of the processor: Dual-Core Intel Xeon

  Processor speed: 3 GHz

  Number of processors: 2

  Total number of Cores: 4

  L2 Cache (per CPU): 4 MB

  Memory: 16 GB

  Bus speed: 1.33 GHz

  Boot ROM version: MP11.005D.B00

  Version of the SCM (System): 1.7f10

  Chipset model: NVIDIA GeForce 7300 GT

  Type: GPU

  Bus: PCIe

  Slot: Slot-1

  The PCIe track width: x 16

  VRAM (Total): 256 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0 x 0393

  Revision ID: 0x00a1

  ROM revision: 3011

  
  

  The system version: Mac OS X 10.7.5 (11 G 63)

  Kernel version: Darwin 11.4.2

  Boot volume: OSX

  Boot Mode: Normal

  Ensure the virtual memory: enabled

  64-bit kernel and Extensions: No.

  We window directly on the hardware, you must install via Boot Camp

  http://www.Apple.com/support/Bootcamp/

  a 64 bit OS will not work unless you use an add-on as the EFI on 2006-2007 Mac Pros is only 32-bit.

  The CD of Ubuntu 64 regular bits have to begin on older Intel Mac, as MacPro1, 1, because of incompatibilities EFI. You must download a special + mac CD of Ubuntu to work around this problem. To 11.04, you can get it here:http://cdimage.ubuntu.com/releases/11.04/release/

  http://Forum.Netkas.org/index.php?topic=1123.90

  Also:

  https://help.Ubuntu.com/community/MacPro

  http://AskUbuntu.com/questions/507354/how-to-install-Ubuntu-14-04-on-my-Mac-Pro-1-1-with-a-raw-hard-drive-by-a-bootabl

• Receive the same message several times, and does not receive any other emails.

  Using Outlook Express, I got the same email, while I can't receive any other emails of revenue due to downtime. I increased the time to 5 minutes.

  The file that retains a number of messages downloaded probably has been corrupted.  Remove the pop3uidl.dbx file (hidden) and see if that fixes the problem.

  Steve

• I'm having a redemption code that goes into problem.  I can enter numbers, but when I try to enter all the letters it is as if the computer is locked, but he is not on any other application

  I'm having a problem entering my redemption code.  You can enter numbers but no letters.  It's as if the computer is locked when I try.  My letters work on any other application

  Looks like you are trying to use a (alphanumeric) redemption code where you are supposed to use a serial number (strictly digital).  A purchase is normally used to purchase a serial number... serial number is what you enter to activate the software.

  Using redemption code

  --------------------

  http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html

• IPhone will not accept any other than the old ID

  IPhone 5 and IOS WIN10 just installed a couple of days.  Trying to synchronize or establish a link to ICloud/Iphone - IPhone can't forget OLD Apple ID I do not have a PW for or can answer questions of security.  New Apple ID works on PC but not the iphone to ITunes but can't get phone off loop for old code.  Any general approached, I can take.  Already tried without success so far the Apple Support. Butcher

  If you have enabled find my iPhone using the old Apple ID then the phone is off permanently unless you can remember the password. It is Activation Lock, a measure of deterrence of theft. There are several ways to get help to recover the password from https://iforgot.apple.comthen contact on behalf of Apple security team: Apple ID: contact Apple for assistance with the security of the Apple ID accounts

  Your other option, if you bought the new phone, is to take the original invoice and the phone to an Apple store and they can remove the locking of Activation. But you must prove that you are the original owner.

  But if none of these work you will never be able to use this phone again.

• Firefox will open 4 or 5 thin legs, but then do not load any other sites after the first 4 or 5 or you can update one of these first tabs - including: config and the addon page

  Firefox 5 worked well. I installed Firefox 7, and when I ran, tabs just say «connecting to...» "and hang up. Rebooting did not help. Sites Web open correctly in IE and Chrome. Disabled all firewalls and antivirus, nothing helped. Uninstalled and reinstalled Firefox 5, everything has worked again. It was using Vista 64-bit.

  Upgrading to Windows 7, uninstalled Firefox 5, installed Firefox 7, had the same problem. Uninstalled Firefox 7 completely (including profile information, I saved this information in another file), restarted the computer and installed Firefox 7 using a clean profile. Do not install add-ons, checked to make sure that all plug-ins were updated and updated plugins up-to-date.

  Now when I run Firefox, I can load 3 or 4 or 5 tabs very well - after these first tabs bit are open, I can not open or refresh all other tabs - with about: config and the add-on Manager - I have to restart Firefox. The hangup does not appear to be associated with what websites I try to open, but it seems that the number is the problem. I ran through all the procedures of the FAQ, including changing the maximum number of connections to 48, and the problem does not seem to go away.

  As a side note, I had this same problem when I tried to go from version 5 to version 6 more. Version 5 is the latest version which worked on my system.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections from 255 to a setting like 30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  See also:

  • http://blog.bonardo.NET/2011/09/30/is-your-firefor-freezing-at-regular-intervals
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• USB Debgging recognized by the PC but not by any other software + Acer Sync?

  T1) it has not been long I've owned my new liquid E700 of Acer (/ E39; what's the diff?). It's an android 4.4.2 Kitkat and I unlocked the developer options. Recently, I searched suites fo PC for Android and believe it or not, I found a good number of free software on the net. In any case, all the software I found aske me to turn on USB debugging I did. When I connect my E700 liquid Acer without debugging, I get an icon in the section pilots in "My computer" (Windows 7) and when I turn debgging, I get another. This means that my laptop makes a difference between enabled and disabled USB debugging. However, none of the software that I downloaded acknowledged that debug mode is on. If it's a software only once, I would say that this PC Suite sucks, but all? There is a problem. Has anyone come across this and it fixed please?

  Q2) both me and my partner have Acer laptops, mine is Windows 7 and hers is Windows 8.1. When I had connected my phone to my partner's laptop computer, drivers have been installed, and a small desktop Gadget that resembled a semicircle U shaped with a smartphone to lower further, while none of this happened on my Acer. is there such a thing as a phone Acer laptop Acer connection/synchronization? It works on Win7? Daniel hasn't it happened on mine?

  -I would like to thank very you much for reading!

  1ST QUARTER)

  E700 aka E39 is the same, the name of the product trade name just vs

  on the USB debugging, on Device Manager, with debugging enabled, do you have any yellow exclamation?

  Q2)

  Can you please post a screenshot of this icon?

• When I click on the tab "Apps", it is written "download error", I can not install any apps

  I have install Creative cloud several times to try to solve this problem but it still the same thing. I click on the tab "applications" of the creative cloud, and a message appears "download error". I can not install all the apps. Could someone help me please?

  Try to use the cleanup tool to remove Adobe Application Manager, uninstall CC help | Uninstall the creative Office Cloud app and reinstall cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• looking for images that contain keywords and DO not contain any other

  Is there a way to LR to find images that contain keywords and do NOT contain others, all in the same search function? In the past I have had this problem by dumping to a subset of the images in the quick collection and then research within there, using a combination of text and metadata search. But is there a way to do this in one step for the entire collection, for example by using the text / search keyword bar and using the appropriate syntax? Sorry if this question has already been answered elsewhere and do not hesitate to send me to the thread, but I tried to do for a long time and unable to find an answer. See you soon

  Search you using the filter bar for the photos that have the desired keywords and place an exclamation point in front of unwanted keywords.

  Example:

  Ohio! Cleveland

  find all the photos with the keyword Ohio but did not keyword Cleveland

• AFTER ERROR CONTINUE to LOOP (or any other way)

  Hi all
  I have to keep my loop for next after the error.
  
  ---
  BEGIN
  FOR rs
  (SELECT 'my select stmt' FROM DUAL)
  )
  LOOP
  NULL;-if there is error update error information in the ERR_LOG table and continue the loop
  END LOOP;
  EXCEPTION
  WHILE OTHERS THEN
  INSERT INTO ERR_LOG VALUES ('error details')
  NULL;
  END;
  ---
  
  or apart from Above method we have another way to implement above solution?
  
  Thank you
  Isabelle Dhaneenja

  You can declare an another begin... end with its own exception handler to catch the error.

  BEGIN
  FOR rs
  (SELECT 'my select stmt' FROM DUAL
  )
  LOOP
  NULL;--if there has error update error info to ERR_LOG table and continue loop
     begin
     null;
     EXCEPTION
     WHEN OTHERS THEN
     INSERT INTO ERR_LOG VALUES('error details' )
     end:
  END LOOP;
  
  END;