Do not see the networks wireless on my laptop under XP sp3.

Similar Questions

• can not see the BTH003 on my Qosmio laptop bluetooth headset

  can not see the BTH003 on my Qosmio laptop bluetooth headset

  Hi koko,.

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems that Bluetooth headphones are not detected. I'll be happy to help you with this problem.

  (1) what is the exact error message / complete you receive?

  (2) what operating system is installed on your computer?

  (3) what is the brand and model of the Bluetooth headset?

  (4) have you made changes on the computer before this problem?

  I suggest you to follow the steps from the links and check if it helps.

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

  I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

  Firewalls are disabled on remote computers?

• My Windows 7 computer will not find the networks wireless after a system restore.

  My Windows 7 computer is not find wireless networks after I did a system restore. It was perfectly good wifi before the system restore and other members of my family have a great connection except me is not a problem with my router. I think I know what the problem is, but I just don't know how to fix it. So there you go. I did my restore system about 2 days after that we moved on the provider of internet/tv "Comcast" to the tv/internet provider "Verizon". what I think has happened, is that I restored my computer to the point when we had no Verizon so that he could not find the network. Now, since we have Comcast it won't identify this network either, so maybe some of you out there could help me. : D

  Hello Nicolas,.

  Thank you our writing about Microsoft Community.

  If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer.

  You may encounter network or problems of Internet in Windows for several reasons.  Some common problems that can cause these problems are:

  • A wireless network adapter switch that is not enabled

  • WEP, WPA, or WPA2 key or password security issues

  • Cables that are not connected correctly

  • Corrupt or incompatible drivers

  • Missing updates

  • Network connection settings

  • Hardware or software problems

  I would ask you to check out the troubleshooting steps provided in the articles below and check if they help you solve the issue.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Here are some links to site Web de Support of Comcast, who talk about troubleshooting of XFINITY Internet connectivity issues.

  XFINITY TV App: Can't detect your XFINITY home network

  The problems of XFINITY Internet connectivity

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

  Thank you.

• After moving my desktop of my computer does not see the network

  cable tested good, replaced by the new network card it works, actually clicked on the computers in the workgroup to see last week and it worked now missing again... can get online another fine two computers agree, but can not see me

  Hello

  If your router not booking IP use.

  Otherwise, configure the computers with static IP addresses.

  http://www.howtogeek.com/HOWTO/19249/how-to-assign-a-static-IP-address-in-XP-Vista-or-Windows-7/

  Then go to sharing and permissions.

  Maybe this can help.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

• My Windows Vista computer does not see the network or printers that are connected to a computer using Windows XP

  before that norton was installed, it worked, but since Norton was installed AND DELETED, Vista will not see XP or its printers.

  I have checked the firewall and they took two computers, but still no luck.

  Hello

  Did you change your computer?

  This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.

  Network card in Windows Vista makes network diagrams of connections between network devices that can be used to troubleshoot connectivity issues. Network map uses a discovery protocol called Link-Layer Topology LLTD (Discovery) that queries other devices on the network to determine how the network is organized.

  Windows Vista includes the software components that implement the LLTD protocol. For other devices on the network to display on the map, they must activate a discovery protocol that can meet the demands of mapping from the Windows Vista-based computer.

  I suggest you to install the update on windows XP.

  http://www.Microsoft.com/download/en/details.aspx?amp;amp;amp;displaylang=en&ID=5577

  This reference so

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

• Guest OS will not see the network

  I have a new ESXi 5 host running.  I can connect to the host with the vsphere client.  I created two geust, a Windows XP OS and a 2008 Server.  I can't get a DHCP address on one of them, when I put a static address, I cannot ping anything other than the host machine.  Can not ping gateway, DNS, etc...  Also, I don't do a ping guests from a workstation on the network.  Any help would be appreciated.  Please let me know if you need other information.

  Thank you

  Mike

  Welcome to the community,

  This is often seen with managed switches. Please ensure the security of ports (for example the office mode) is not enabled on the physical switch ports. According to the model of switch, you must configure switchport access mode and spanning tree portfast for ESXi uplink ports.

  If this is not enough, please provide details on the current configuration of the network (physical and virtual).

  André

• difficulty to remove the network wireless to my laptop

  Hi - I'm unable to remove the network my laptop wireless. I have windows Vista Home premium on a Dell Inspiron 1525. I need to delete the list of wireless network in order to re - install (due to changes to the security settings). When I try to remove it, it disappears, but then within 5 seconds it appears again, like a ghost in my computer. Help, please

  Perhaps, he keeps coming back because you're connected to the Internet.

  I assume you mean: network and sharing Center, manage wireless networks, one of the networks on this list, your right you click on the network and clicked on delete network.

  Well, if you click Properties, you can change the security settings.

  If you were logged on to the disconnected from the Internet and then you can remove it and if it works you will see it come back.

  But he will always be there even if you don't see it.

  To remove it completely connect to the Internet with another connection, not one you want to delete.

  Open the network and sharing Center click on customize, click on merge or delete network connections, select the connection that you want to remove and click on delete. This removes the registry.

  If you are unable to connect to the Internet to do this follow these steps:

  Press the Windows Logo key and the R key to open the run.

  type: regedit, click OK

  Navigate to: HKLM/SOFTWARE/Microsoft/Windows NT / CurrentVersion / NetworkList / profiles

  Click on one of the profiles below to view on the right side. Look at the name of the profile to make sure it is the right one.

  When you see one you want to remove a right click the highlighted one on the left side and click on delete.

• Samsung S5 does not see the printer wireless

  I just bought this printer last night, I put in place using a laptop that sits on the wireless network and the laptop connects to the printer very well via wifi.  I downloaded the app HP AIO Remote for android phone went through the setup and when it gets to the point of looking for and finding the printer says that no printers are.  I tried to restart the phone, uninstall and reinstall the application, I tried HP ePrint app and still no luck.  The notebook computer always connects to the printer and my office to connect via USB.  I use the good app?  Is there something that I am missing?  Help, please!

  67SS wrote:

  ....   The notebook computer always connects to the printer and my office to connect via USB.  ....

  Hello

  No, your printer must be on a wireless network WITH the Samsung, otherwise your Samsung can't see. You can use a direct impression, but you need to your printer supports this feature.

  The easiest way: connect your printer to your network home woreless and all devices in your House can share the printer. Moreover, what is your printer?

  Concerning

• VMKernel can not see the network...

  I have 4 NICs, 2 NICs service a vswitch with a service console and VMkernel a.   The service IP console works fine but I have no network connectivity for the VMkernel on the same vswitch with a static IP address.  If I set the VMkernel for DHCP, it gets an address of 169.x.  esxcfg-switch - l & esxcfg-NICS - l show no problem.

  Hello

  It seems the two network adapters that you use with that one VLAN configured on the pSwitch.

  • Try to configure vSwitch with a single NETWORK card, which saw Service Console PortGroup and confirm the S.C having connectivity

  • UN-Link the NIC of the vSwitch and add the second NETWORK card and confirm the S.C with connectivity.

  If you have a connectivity on both network adapters, and then in the pSwitch problem seems to be.

  • Troubleshooting above with VMKernel PortGroup and confirm - there is connectivity to the other host via the vmkping command.

  • If doesn't work then be sure to there is a circuit in the pSwitch or not.

  • If you have chutes, make sure the tag pSwitch Port.

  • Put the VLAN ID in the VMKernel PortGroup.

  • Put the VLAN ID in the Service Console PortGroup

  If you are not sure, connect two VMKernel network cards to a crossover cable and try the connectivity tests.

  Best regards

  Hussain Al Sayed

  If you find this information useful, please give points to "correct" or "useful".

• Computer laptop Windows 7 can see other wired PC via a wireless connection by specifying the box "search programs and files" drive letter in the start menu, but not in the network screen

  My laptop with Windows 7 (64-bit) can not see the other desktop PC running Windows XP via a wireless connection, except if it is plugged into my laptop so only I can see them on the network.
  I checked all the working groups to ensure that all are the same.

  However, when my laptop into Wi - Fi, I could see the other wired desktop PC by specifying the network path in "search programs and files" to the start menu in the Windows 7 laptop, I was able to add network folder by specifying the drive letter for the connection and file I want to connect via a right click on the network to connect a network drive...

  Then, finally I can access any other desktop pc wired to shared folder via the Wi - Fi by this method.

  But I still don't see them on eventhrough network I can access by this method. Please help me solve this problem.

  Hi Hkway,

  • You are able to see the Windows 7 machine Windows XP computer when connected through wireless and if it is accessible through network?

  First of all, check if the NetBIOS protocol is installed on your Windows XP computer. To install the NetBIOS Protocol, follow these steps:

  1. click on start, click on Control Panel and then double-click network connections.

  2. right click on the card that you want to add NetBEUI to and then click Properties.

  3. on the general tab, click on install.

  4. click on Protocol and then click Add.

  5. Click to select NetBIOS protocol in the list, and then click OK.

  6. restart your computer.

  Also make sure that NetBIOS over TCP/IP is enabled in the Windows XP computer. To do this, follow these steps.

  Turn on NetBIOS over TCP/IP

  1. click onStart, click on Control Paneland then click on network connections and Internet.

  2. click onnetwork connections.

  3. right click onLocal area connectionand then click Properties.

  4. click onInternet Protocol (TCP/IP)and then click Properties.

  5. click on the tabgeneral and then click Advanced.

  6. click on theWINS tab.

  7. underNetBIOS setting, click Enable NetBIOS over TCP/IP, and then clickOK twice.

  8. click onclose to close the local area network connection properties dialog box.

  9. close the network connections window.

   

  After following the above steps, check if you can access the computer Windows XP of Windows 7 computer using the wireless connection.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• PC will not 'see' Mac on the network wireless

  I just installed a Linksys WRT54G Router, and created a home network, which includes free Wi - Fi for my MacBook Pro.  The ethernet connected PC does not 'see' the Mac.  I know they are connected from the Mac can access the internet and can see files in folder on my part that I installed on the PC (after I have provide the password).  I'm running VISTA on the PC.  The network is set up in a private capacity.  In the "Network and sharing" screens on the PC, the network discovery and file sharing are on.  I checked with my internet provider to ensure that their safety programs are not the issue and found that starting the PC in safe mode doesn't change anything.  The card network and sharing or full view map only shows the PC, the name of the network and the internet.  It never shows the Mac well that the Mac indicates the network name as its connection.  Can anyone help or is it a problem that can be a gazillion things?

  Hello

  I suggest you to see link and check if it helps:

  Mac 101: File sharing

  http://support.Apple.com/kb/ht1549

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• Can't see the available wireless networks

  I bought a new router (netgear300) and tried to connect to it. For some reason any would connect to my computer, but it has not been through the modem, so I uninstalled the network card and reinstalled and rebooted the computer. Now, I do not see the wireless networks available and cannot connect to anything. I tried to download the readers online, connect to the network manually, but nothing seems to work. I get 3 error messages when I try. They are; 1 reset your wireless, 2 network adapter. the NIC "atheros ar5007 802. 11 b / g wifi adapter "known issues of pilot or related equipment, 3. Make sure that the internet protocol bindings are correct. I did all the and still nothing seems to work, and I still don't see the available wireless networks. Nothing has had this problem before? My laptop is a compaq presario f700 model. I am currently using windows vista Home premium and have the cd of windows 7 Professional, but I don't know if the upgrade with this question will repair or remain the same. Someone knows how to fix this?

  Hi Mattcreatr,

  1 can connect to the router with other machines?

  Step 1:

  Make sure you have the latest NETWORK adapter drivers installed.

  Also, see if there is a software that goes along with the drivers.  If so, get the latest version of this as well.

  Update drivers: recommended links

  Step 2;

  Also, see if there is a software that goes along with the drivers.  If so, download the recent plus version and that as well.

  Also, make sure that the wireless adapter is turned on.

  a. Click Start, type network and sharing in the search box Center start and press ENTER.

  b. click on change adapter settings.

  c. right click on the connection, and then select activate.

  Step 3:

  Alternatively, you can perform a restore of the system to a restore point where you do not experience the problem and check.

  Start your computer in safe mode

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.