Satellite L500: cannot change display Multiple to play via the TV

Similar Questions

• Satellite L500 - external screen display after closing the lid?

  Hello
  I use the Satellite L500 - 120 Notebook, and before installing Windows 7, the laptop has a function very uncomfortable, when I applied an external display.
  When I closed the lid of my laptop, Office was shown on my display (with the native resolution of the external display) external, so I had not to
  change anything on the control panel. In Windows 7, Miss me this feature. I already tried to use the Control Panel, but there is no parameters, which fits
  with the previous ones. I can duplicate the screen in order to see my desktop screen on my external screen, but with the resolution of 1366 x 768 laptop.
  If I extend the views, then there is only the background image to the external screen, but this time with the native resolution.

  So my question is, how to conifgure Windows to recognize that I closed the lid, and the screen should be shown on my external screen?
  Or should I install applications Toshiba, that I had before, who visited account this function?

  Thanks for any help!

  Hello

  I m not a Windows 7 user because I want to wait until it will be released official, but I hope that I can help you a bit:

  First of all in power management, you can choose the action that happens if you close the lid (g. e. sleep, close, etc.). This action must be disabled because otherwise the laptop shuts down or something else.

  So I think that you need to install the display driver for your laptop. You can try the Vista driver because most of them are working on Windows 7.
  Then you should be able to define the correct screen resolution for external monitor.

  A working display driver is important to the clone or extends monitors to verify this!

• Satellite L500 - cannot turn off the WiFi and network icon changing itself

  Hello

  I have a Satellite L500-1GL (comes with Win 32-bit =) and since I installed the latest updates I can not disable the wireless function. When I use the shortcut key to activate or disable the indicator led is turning on and off, but the wireless feature is always turned on and even the icon which shows the network connection, itself changes without doing something with it.

  A few times it shows Red Cross (as she has no connection), but says: connected. When I use wireless connecton always displays the cable connection icon. most of the time, when he should have been showing the strength of the signal.

  This is reaally annoing. Please help me solve this problem.

  Hi danihun,

  > since I installed the latest updates I can not disable the wireless function.
  The updates you have installed exactly?

  In your case, I would try a system restore to an earlier point.
  Check this box!

• Re: Satellite L500-1XJ - changed keyboard

  Bought a Satellite L500 - 1XJ 32-bit with Windows 7 second hand from a friend.
  It worked perfectly until the Toshiba files were accidentally deleted.
  Cannot find it anywhere, so I guess they have been permanently deleted.

  I tried the restore without success.
  Also the keyboard is now mixed up IE for the @ I have to use shift 2 instead of travel "."

  What can I do?

  What Toshiba files do you mean exactly?
  Maybe Toshiba image files?

  With regard to the problem of keyboard layout:
  I guess that the language of the keyboard has been changed.

  Usually, you can add and change the keyboard language in:
  Panel-> clock, language and region-> region and language-> keyboards and languages-> change keyboards.

  Details: [change your keyboard type | http://windows.microsoft.com/en-us/windows7/add-or-change-an-input-language]

• Satellite A200 - cannot change the language on the CD OEM Toshiba

  Hoping to find help on how to change my Toshiba Satellite A200 language Spanish to English.

  I asked a friend to buy me this laptop to Spain, unknowing it OEM came Spanish language and the recovery CD is only as only Spanish but I do not understand Spanish and I was wrong to go on the laptop because I don't want to click on the wrong thing in Spanish.

  Even when I install programs, it automatically installs in Spanish and it's really frustrating.

  Someone HELP!

  Your laptop was purchased in Spain, and therefore the Vista operating system is also in the Spanish language.
  You cannot change it to English without buying a new drive for Microsoft Vista in English.

  In some cases, it would be possible to install a MUI (Multilanguage) package for Vista, but it works with Vista Edition full (and businesses?)

• Satellite L500 - cannot flash BIOS

  Hi all

  Looking for help here - I have a series of Satellite L500 and the battery has recently stopped charging - from 3 hours to 0% - not charging not from one day to the next. Have you tried altering the eco of the settings button, by pressing power for 40 seconds and even a new power supply unit (we have these to my work), but nothing seems to work. The only thing I can do without buying a new battery is flashing the BIOS.

  Problem: I get an error saying that the BIOS cannot be flashed because it has less than 10% of its power. An idea for a workaround?

  I'm more inclined to buy a new laptop than to spend any money fix this one (CD drive and a USB port also stopped working) but try to maintain the old faithful.

  Any tips or advice?

  Thank you
  Bajar

  To Flash the BIOS by using the version focused on winning, the battery must be charged.
  If it s unloaded, the process of updating the BIOS would not start up.

  But why you want to update the BIOS?
  BIOS update does not resolve the problems with the drive CD/DVD or USB ports.

• Satellite L - cannot change the size of the video

  I can't change the size of my video. It is not more fill the entire screen and my games is also "cut".

  I tried to adapt media player, messed with all the different settings, nothing. I like to watch my movies and play my screen full of games. I can't understand it and it drives me crazy. I have no idea what happened, was to play full screen for a while and then suddenly - who, not more :(

  Hello

  You have linked to play with the display settings?

• Satellite L500 - cannot run the DVD-ROM games

  I am currently having problems with my Toshiba Satellite L500 series. The problem is, I can run purchased audio CD, as well as DVDs of the films, but I can't run games DVDrom. Music CD will automatically start Media Player very well, as well as films in their corresponding players... Games (like Dragon Age Origins and Left 4 Dead) DVD - ROM cannot read, or be recognized. When I go to "Computer" and try to access the game, it says "no available disk. Please insert disc into drive D: ". So from what I understand, the CD/DVD-rom may not be completely broken if he reads all types, except for games to DVDrom.

  Can someone help me with this please! It is quite frustrating because my computer is just now to a year! I wouldn't think that all computer companies sell computers that fall apart after a year... I was hoping that it was different with Toshiba.

  Once more, the CD/DVD-ROM can read CD and DVD of the film, but NOT the games to DVDrom. Help, please! Thanks in advance!

  Hi adecker,.

  Maybe it s caused due the upper and lower filters in the registry. You should try to remove as you can read in this article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/314060

  I had a similar problem that some discs can't be read more. And I went thorugh based forum to clean the CD/DVD drive lens with a microfibre cloth. Be careful if you do this and don't scratch the lens.
  Check this box!

• Satellite L500 - cannot install the Intel video driver

  Ok
  complete failure of the hard drive, no recovery cd was created, reloaded windows 7, looked up and downloaded the drivers from Toshiba, BUT there are only two video drivers listed, amd and Intel, both marked "for model only supported" its an Intel machine so I tried the Intel driver but it doesn't install, it just closes which I believe if the corresponding material is not found is the default action for these drivers.

  But I'm stuck with 'standard VGA graphics adapt' all other drivers loaded perfectly, (I installed the driver from chipset Intel first and rebooted, so it should be ok but it s not)

  Any ideas?

  Rgds
  SYB

  What Satellite L500 you exactly (L500-xxx)?
  Do you use 32 or 64 bit OS?

• Satellite L500 - cannot activate the WLAN on FN + F8

  Hello to all users of Toshiba, Ii'm new to computers laptop Toshiba, this one beeing my 1st and iIhave a well-known problem, I read on the internet.

  I recently bought a Satellite L500-13W. It has Realtek Wifi and comes with Vista OS. I deleted Vista OS since I have the license to the retail of Windows 7 Professional and Windows 7 top intalled. All work well, Audio, video, everything outside the wireless card. I enabled from the BIOS and everything and yet when I press FN + F8 it does not activate. The drivers are properly installed, as Windows 7 brings the upgrade of drivers. He said that the card works fine, but it does not turn on and search for Wifi signals. The Orange of the WIFI led does illuminate not.

  If anyone has a solution for this problem, I would be very grateful. I don't know what can be the problem, the software or the hardware.

  Advice me please. Thank you.

  Hi Darius1990,

  > Drivers are properly installed, as Windows 7 brings upgrade drivers
  This means that you have installed the Windows update WIFI driver and no official site of Toshiba, right?
  Well, in this case, I would try the prétestées WLAN driver from Toshiba. So you can make sure that it s not a WLAN driver related problem. Just check the WLAN from Toshiba Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Have you tested other FN keys combination?
  If they don t work too you must install the package of added value and utility to Support Flash Cards because these two tools to control the function FN key and are important to use them correctly.
  ?

• Change display order with access to the laptop screen

  have a hp dv7 is about 4 years old, that the connected screen was broken, (always visible only small portion) and have changed somehow connected only on-screen display order.  have tried several options and tricks forums have suggested but not chance of recovering it for external display also. Is there a combination of key STROKE or another remady to correct this.  Was able to boot to desktop etc so do not think that his material proplem trying to restore or recovery to clean the accumulated junk thanks for any help

  Try to use the FN + F4 key combination to play with the external display.

• Satellite A200 - 26 d display is visible only on the external monitor

  I have a display problem with a Satellite A200 - 26 d

  As I was using the laptop, the screen went black.
  Shut down and restarted the normal red Toshiba logo came but was dark and light to the right of the screen to the left.
  Screen went black new carries on reboot but still no display.

  Connected to an external display system works very well with that and show me in display properties there are 2 screens.

  All ideas

  > Plugged in an external system works very well with that and show me in display properties there are 2 screens.
  What happens if you want to use the FN + F5 key combination?
  Can you pass to the internal display again?

• Satellite L500 starts, allows me to connect, and then the screen goes black

  I just bought a new Toshiba Satellite L500.

  As I am a student in high school, it was a huge and very expensive purchase for me.
  I previously had a Toshiba that served me extremely well, so I was ready to buy a new one, but now I have a problem with it.
  I have a L5000 with operating system Windows 7 Professional.

  Notepad starts end, showing the Welcome screen and allowing me to enter my password, but once the password is accepted, and disappears from the Welcome screen, I find myself with a black screen showing only my mouse pointer.

  If I enter CTRL + ALT + DELETE, the Task Manager becomes visible, but I don't see nothing else UNLESS I select 'explorer' under the processes tab and end process, then re-run the Explorer - then only the home screen becomes visible.

  It's a new laptop - Needless to say I don't want to have to do this every time I turn it on. I should try to restore factory default?
  I'm usually very proficient with computers, but I don't have enough faith to tinker with it.

  Can anyone help?

  Hi Korosuhito,
  It sounds like an infection or a misconfiguration.

  You can try to start in safe mode and search for services that run maybe you can find the "bad guy".

  or (the fastest) is to restore the factory settings
  Make sure the bios is on the 'default' as well

  I think that you have no personal data on this machine in order to recovery is the most simple and quick way!

  If the error after recovery occours made back to your dealer and get another

• Satellite L500-1EU-CD/DVD drive has disappeared from the system

  The "PIONEER DVD - RW DVRTD09A" device (IDE\CdRomPIONEER_DVD-RW__DVRTD09A___1.50___\4&2f0449cb&0& 0.1.0) disappeared from the system without first be prepared for removal.

  This causes my system to hold on for about 10 seconds, then returns to normal. It is preceded by the error:

  The device, \Device\Ide\iaStor0, did not in the expiration time.

  What happens to little about 30 seconds before the shot

  My laptop is TOSHIBA Satellite L500 - 1EU PSLJTE. OS - Window$ XP SP3, all the drivers are downloaded from the TOSHIBA Driver download page @ http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

  Hello

  Have you also tried removing the upper and lower registry filters? All the CD/DVD drive associated programs such as Nero, installation of filters in the registry and can cause such problems.

  To remove them, follow this work around:
  http://support.Microsoft.com/kb/314060

• change display magnification to return to the normal display. Does not appear a whole page in Internet Explorer.

  Something that I've done done Internet Explorer displays in such magnification that it didn't all appear on screen at the same time.  I need to know how to get it back as if it were before.

  The page can be returned to any value via the dropdown page menu. The select Zoom, then click value of whatever your choice.