do not sensitive - create banner ad expand on roll, how to tutorial code workflow?

Similar Questions

• Windows backup error; A snapshot could not be created.

  Original title: Windows 7 - windows backup - snapshot could not be created

  When you use the Windows backup I get an error indicating that the snapshot could not be created unless I'm trying to backup to DVD or a USB hard drive.

  I use:

  Windows 7 Home Premium SP1

  processor Intel I5 2310

  8 GB RAM

  1.5 TB of hard drive

  The full message is:

  "A snapshot could not be created.  Check the event logs "VSS" and "SPP" application for more information.

  Details: Writer experienced a transient error. I have the backup process is restarted, the error does not recur. »

  Where newspapers there is an event id 8229 - I went to the event log online help and tried all of the listed suggestions, including shutting down my computer and then restarting him and still get the same error.  I tried to disable the antivirus software and do the back up but still get the same error.

  I have spent at the command prompt and typed "vssadmin list writers" to see if all the writers are stable and the following are not listed as stable:

  System Writer - State [5] waiting for completion

  MSSearch writer - State [5] waiting for completion

  WMI Writer - State [9] failed

  What can I do to get the backup to work?

  Hi Tom,

  I wish to inform you that this error may occur if the Volume Shadow Copy Service of Notification of SPP has not started and is not set to automatic. Please refer to these steps to learn how to start their:

  a. on the desktop, press Windows key + R to open the Run dialog box.

  b. type services.msc in the Run dialog boxand press Enter to open Services.

  c. right-click on the shadow copy volume and the SPP Service of Notification services, and then click Properties.

  d. if the box Startup type is set to Disabled, change it to Automatic.

  e. click OK to close the Properties window.

  f. right click on the Volume Shadow Copy and SPP Service of Notification servicesand then click Start. The service should start without errors.

  If you receive any errors, please let us know.

  See the Event Viewer for the exact error message or code, and the cause of the problem. Please let us know the same thing.

  a. click on the Start button.

  b. Type in the Event Viewer, in the search field.

  c. this will bring up the box of Event Viewer . Click to open the Event Viewer.

  d. in the left pane, expand Windowslogs.

  e. click the application log and syslog, one after the other. Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be in training. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document.

   

  Please get back to us with the results.

• Key USB Bootable Bootcamp could not be created

  Hello, I am trying to install windows 10, I downloaded the iso from microsofts website and already got bootcamp on my USB support software, I tried to install windows with iso 10 but it says "Usb bootable stick could not be created" then under it, he says that he only supports versions 7 or later version of windows , so I assumed it was my iso image, so I Re downloaded and it did not work, I did remove and eject my time of mutiple iso image, reboot, I thought maybe I should reinstall bootcamp but know too much what the problem is. Help, please!

  Hello hawkstrattus,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to install Windows 10 on your MacBook Air. From your post, I see you're under OS X Lion mountain. Windows 10 requires OS X Yosemite or later. You can upgrade your software on MacBook Air. The following article contains additional information about the system requirements:

  Use 10 Windows on your Mac with Boot Camp

  Best regards

• Your bootable USB key could not be created

  "Your bootable USB key could not be created.

  Hey guys,.

  I Googled what to do about this error message and all I got was to ensure that the ISO is disassembled. I did, and yet I still get the same exact error message. I'm trying to get Windows 7 Home Premium on a 2012-13 inch Mac Book Pro. I also use a flashdrive 16 GB for the ISO image. Any ideas on how to solve this problem?

  Please read: create an ISO image for the Boot Camp Windows installation media.

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• HP Envy 13-d008na: HP Envy 13 - Microphone is not sensitive

  Hi all

  After successfully someone solve my first problem with this laptop (involving a defective sensor), I have now decided to address the issue of second and hopefully last, that I had.

  My microphone is not sensitive at all - but it works and I'm sure it's a driver problem too. Let me explain.

  The microphone has always been quiet. One of the first things I did when I got this laptop last month was Skype, friends, and they said that I sounded very far. I tried a test call to Skype service and when speaking normally could hardly hear my voice. I did some troubleshooting and even with the sensitivity of the microphone up to 100% and boost up to 30dB, I was still with realism unhearable.

  It has gotten to the point where I tried to uninstall the drivers, and I discovered that my audio drivers caused the mic for suddenly works perfectly - however resettlement caused reproduce the error uninstalling.

  I reinstalled the drivers because I guess the Bang and Olufsen (Realtek) drivers are needed for the audio output of high quality or something else - but I was wondering if there is a difficulty which would allow me to use the microphone with these drivers installed instead of having to uninstall it, whenever I want to use the microphone?

  Note: the microphone works, but is not very sensitive and I can just be heard even when I'm shouting in my screen!

  Thank you

  Kyran Hill

  Kelvin2 wrote:
  

  disable the sound effects for the network of microphones.

  "This is done through the control panel 'sound'-> 'recording' tab-> select" MICROPHONE ARRAY ' and click on 'Properties'-> 'micro' of "improvements" tab pane selection-> click on the box 'Turn off all sound effects' then click 'OK' on all the back panels to acoustic Panel.

  Tired and fixed it hopefully can help you guys

  Great work Kelvin2!

  I also made sure "Microphone Array" has been defined as peripheral default save too - and with your help it now seems to work brilliantly! That said, this problem has a record of rear entry, but I hope it's fixed

  Thanks again,

  Kyran

• Toshiba 1 TB Store 'cannot copy '. "the file or directory could not be created.

  I am trying to transfer a little less 5 GB 36 996 zip data files on a network drive on my brand new Toshiba 1 TB drive. I created a directory "E:\TOSHIBA\2008-Dec" in the root but only 16386 files copied. If I try to copy files over I get windows error message "Failed to copy" "file or directory could not be created.

  Obviously the disk space should not be a problem. Any ideas? Thank you.

  What happens if you try to copy another file on the HARD disk that is larger than 5 GB?

  What file system you are using on the external HARD drive? Maybe you should try to reformat to NTFS.

  In addition, you should try another cable.

• Entry on the stylus is not sensitive enough

  I like to use the touchscreen and stylus on the TX2 tablet, but I noticed that it is often not sensitive. For example, if I use the software keyboard at the entrance of stylus, then I noticed that I sometimes have to hit a key to 4 or 5 times before it registers. Similar problem with the selection of menu items. I can't find any configuration for this. Is there any ideas on how to improve this?

  Calibrate the touch pen.

• "I get,' files for the recovery diskette can not be created ' and I can't save my PC

  When I try to back up my PC, I get "files for the recovery diskette could not be created" how to fix this?

  Hello

  This problem can occur because ASR is not supported in Windows XP Home Edition. However, users of Windows XP Home Edition can access the Recovery Wizard if they install the Ntbackup program in the Windows XP Home Edition CD-ROM Valueadd folder.

  See the steps listed in the article below and check
  An Error Message appears when you try to use the Automated System Recovery Wizard
  http://support.Microsoft.com/kb/302700

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• new port could not be created. : Windows XP 0000

  After you install a MX870 on my wireless network, I installed the drivers from Canon, etc.. The Canon program detects the printer on the net and when I click on connect, I get the message "new port could not be created.: 0000"

  It comes to my office, connected to my router by ethernet. Everything else works OK. I have connected my loptop using the same software but thru the wireless connection and it prints well. I also have an old printer connected to a port of regular printer to my desktop.

  I use XP 32. Its current on updates.

  Help, please.

  Hi JimMathis,

  Try the steps mentioned below and see if it helps.

  (a) click on the Start menu , and then click Printers and faxes

  Right-click on the printer Canon MX870 b), and then select Properties

  (c) go to the Ports tab and make sure the Canon BJ network port is checked.

  Note: If Canon BJ network port is not checked then you will need create the port.

  (d) click on Add Port> button and select the type of "Canon BJNP Port".

  (e) the Canon MX870 printer will be automatically associated with this new port.

  (f) click OK

• Make a backup of ASR, saved, but at the end of the record, I got this message: discovery of the ASR diskette has not been created.

  at the end of the recording, I got this message: discovery of the ASR diskette has not been created. You will not be able to restore an ASR backup without the system information stored on this disk. What does that mean? Should I save my data otherwise? I don't have a floppy drive (I'm surprised if someone does) but I have a dvd read/write cd drive... One last thing. When I looked at the content on the flash drive with program de-Frag it was lit, which means completely fragmented, the program recommended it de-fragment it... is this safe with a file of this size on a flash drive?

  Original title: Saving went well, but

  Windows XP is too old to do something other than a floppy drive.  If the automated system recovery disk is important to your backup and restore needs (HINT: YES it IS!) then get a USB floppy drive to create the ASR disk.  Or get a copy of most modern backup and restore program that works under XP and use modern media (USB, CD/DVD, keys etc.) to create a startup/recovery media.

• Error.' c:\docume~'\earl\locals~1\temp. A temporary file needed for initialization could not be created or cannot be written in ' when try to run 16-bit programs in windows xp computer at home.

  original title: 16-bit windows subsystem error

  I was able to run 16-bit programs on my computer with windows xp home edition. now when I try to open the program I get a 16-bit windows subsystem error. c:\DOCUME~'\earl\locals~1\Temp. a temporary file needed for initialization could not be created or cannot be written to. Make sure that the path exists, and the space is 'close' to teminate the application available.choose

  Hi EarlBettencourt,

  You can follow this link & check if the problem persists:

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  Hope the helps of information.

• Error: "an error occurred saving the file because it could not be created" during the recording of digitized file

  Original title: I'm not able to save the scan through my HP Officejet 6210 all-in-one.

  I get this error message: an error occurred saving the file because it could not be created. What should I do? I used to be able to save documents in the form of files .pdf until recently when my computer has been infected by a virus, and someone helped clean up remotely.

  Hi ameerlakhani,
   
  Try to save the scanned in a different file format and check if it helps fix the problem.
  Follow the steps in this article and check if it helps.
  Using the HP scan Diagnostic Utility
   
  If this is not enough, post your request in the support forum HP for assistance.
  Visit the following link to do the same thing:
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

• When you try to schedule a task in XP, make a mistake "the new task could not be created the specific error is 0x80070005: access is denied."

  My

  System Type X 86-based PC
  Processor x 86 Family 6 Model 23 Stepping 10 GenuineIntel ~ 3324 Mhz
  A05 BIOS Version/Date Dell Inc., 07-31-2009
  SMBIOS 2.5 version

  I'm trying to schedule a new task I get this error

  The new task could not be created specific error is 0x80070005: access is denied

  I am an administrator for this computer and I am connected to the office network.

  I downloaded a patch KB904423, but it tells me that the installer has detected that the SP of the system version is newer the updte I am applying, I did not need to install this update

  Is there any fix for this?

  Thank you

  Hi dgxp64,

  ·         The computer is on a domain network?

  Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2: Check to see if this article helps you.

  How to solve the scheduled tasks in Windows XP and Windows Server 2003

  Method 3: We will grant permission for the C:\Users folder and check if it helps.

  How to set, view, change, or remove special permissions for files and folders in Windows XP

  If the computer is on a domain network you can post your query on the TechNet Forums.

  Windows XP IT Pro category

• XP pro sp3 run asr, but didn't start; files for the recovery diskette could not be created

  I had previously asr has been successfully run on the same configuration but have decided to update the recovery data. I tried to restart the asr by clicking Start, all programs, accessories, system, backup tools. The Backup Wizard appears and I clicked on Advanced Mode. Then followed the backup utility page, I clicked on the ASR Wizard. The next page has been the preparation of Recovery Wizard, I clicked next and was presented with the option of backup destination and, after finishing the backup destination, I clicked Next. My page was last option; End of the ASR Wizard, I clicked Finish. Backup went into his usual preamble but almost instantly a warning box came up with the message "files for the recovery diskette can not be created." I am running xp pro sp3 as I had been for the creation of the previously successful GDR.

  I also tried using the Backup Wizard and I clicked on backup all information on this computer (this option automatically provides ASR) and followed the instructions of the wizard through to the end and the failure has been the same.

  I found a solution to my problem of ASR. If I was not able to create an asr backup, I was still able to run Ntbackup. I've saved my OS drive then ran repair with the XP Professional installation cd. Backup ASR works now.

  OK, I had to reinstall all them that updates the Knowledge Base Microsoft and also all the Service Packs. One or two of the plug-and-play applications were a bit annoying, but be as I have all the installation cd, other than being tedious, have all been re-installed and the system is now as good as new.