Do not work application after paying

Similar Questions

• sound card does not work correctly after Windows update

  My sound card has been disabled when I install an automatic update for windows. There was an extra audio driver in Device Manager 'bluetooth AV audio' and audio peripheral anoither like this. After installation there is no sound coming out if my sound card was on the list of Device Manager. I followed several steps through windows help and support to solve the problem since seeing him on my laptop for mute also did not work. After you resolve the problem with the use of MICROSOFT FIX IT, it was fixed but this isn't the same quality that I get. Its volume is less eventhough volume: 100. The sound card that was originally installed on my laptop is "Conexant High definition SmartAudio HD2. Is there something more I need to do in order for me to get the same quality of sounds I have before installation?

  Moreover, the light of my keyboard for caps lock shift and scrolling also failed after installation. I reformat my laptop after the incident, so I can get a good in the new system, but it does not solve the problem.

  I also need to update my sound card for my HP laptop? Please help me.

  Thank you!

  Hello

  1. what windows update that you install?

  I would ask you to try using a different set of drivers to verify. For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Conexant support:
  http://www.Conexant.com/support/

  I hope this helps.

• What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  Mr President.

  What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  --SL_CUSTOMERS table data
  
  
  INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
  
  
  
  

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG 
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"   
  FOR EACH ROW   
  BEGIN   
  IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN  
    SELECT SL_CUSTOMERS_SEQ.nextval   
      INTO :NEW.CUSTOMER_ID  
      FROM DUAL;   
    END IF;   
  END;   
  /
  
  
  
  

  When I try to insert several records with the seq.nextval it gives error

  violation of primary key.

  INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd')
  ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  One error saving changes to table "ALIZA"."SL_CUSTOMERS":
  Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  
  
  
  

  Concerning

  Mr President.

  I find the solution by creating a function before the triiger

  as below

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS
  BEGIN
     RETURN SL_CUSTOMERS_SEQ.NEXTVAL;
  
  END;
  /
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"
  FOR EACH ROW
  DECLARE
  dummy VARCHAR2(200);
  BEGIN
    dummy := get_SL_CUSTOMERS_vId();
    :NEW.CUSTOMER_ID := dummy;
  END;
  /  
  

  It works very well

  Thank you all for the suggestions.

  Concerning

• Plugins does not work in After Effects CC15.3

  Everything worked perfectly yesterday. A project of client using some of my favorite plugins like Trapcode Form and particular.

  After update today, would continue my project where I left.

  However, the majority of my plugins disappeared, leaving me unable to progress, short on time.

  I had to completely start over, with a new idea and the standard after effects plugins.

  I tried to reinstall them, but they may not appear.

  Did anyone facing this problem too?

  Can you please help.

  Like HippieBoy, but on Windows 10, I tried to copy the plugins trapcode manually from the

  "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\Plug-ins\Trapcode.

  TO

  "C:\Program Files\Adobe\Adobe after effects CC 2015.3\Support Files\Plug-ins\Trapcode."

  and my trapcode plugins where backward. The amazing thing is that I have installed the Plugin Trapcode after having updated to 2015.3 CC. The reason was probably that the Trapcode plugins trial version installed to AE CC 2015 and that the folder was still here the licensed version of Trapcode installed in the old folder.

  Re: Plugins does not work in After Effects CC15.3

  Hope this will help

• Updated this AM - now does not work - application on the (0xc000001d) update error

  Updated this AM - now does not work - application on the (0xc000001d) update error

  Now what?

  JohnC salvation,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Browser blackBerry Smartphones not working anymore after 2 years

  Hello

  I hope someone can help me with the following: after 2 years my internet browser no longer works on my BB curve 9300 (not via 3G, no WiFi). FB and Whatsapp still work.

  Now my smartphone is only half of a smartphone, so I hope that your team of professionals will be albe to help me in no time.

  Thanks a lot from the outset.

  From what you describe, I can only deduct that the Service books never happened to your BB... and if you waited the hour and then restarted. And even then your services were not working.

  Given this scenario, you next fall at what stage followed 3 in what I provided above... in touch with your mobile provider for formal support. Something went wrong turned into the connection between your device and your network of carriers... only they can watch their network to understand why this has happened and remedy.

  It is true that, in many markets service BB/BIS costs indeed data plans more 'generic'... it's because there's infrastructure that the carriers and the BB must provide/support so that the exclusive services of BB to function. Non - BB devices don't use this infrastructure, and so in many markets the carriers can get away with paying more for it. But this price is set by carriers (not all markets have a surcharge for BB services... services of BB to sell at the same price as non - BB... it varies).

  Good luck!

• computer does not work properly after the update, because the screen is black.

  Advice please! :-(

  After an update there about 2 months, my computer has never worked properly after that I turned it back. My windows start page is longer there. My screen is black. The words are only in white and fluorescent yellow...

  The only way I can go online to find Norton (is always at the bottom of the black screen) and go to help. I can get a search bar like that. Almost as if this black screen hides everything below.  Computer is 13 months old.

  My internet provider says it isn't them. Gateway said it's not my computer so idk what happened after this update.

  Any advice would be so appreciated.

  Thank you.

  Hi Patty,.

  Welcome to the Microsoft community. I would be grateful if you can answer these questions.

  1. You have installed the latest drivers for Windows 8?
  2. What is the model number for Gateway computer?

  If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

  Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

  Method 1: To resolve this problem, update the Gateway website. video card driver

  Step 1: Check out these Microsoft items for additional reference:

  Download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Step 2: If you are not able to find drivers for Windows 8 to HP support. Try to install the graphics drivers in compatibility mode and check:

  Download your applications and devices in Windows 8.1

  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  If the problem persists, proceed to the next method.

  Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  See also the suggestion provided by Scott (owner of Forum) from this thread and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Keyboard keys not working only after you install the new OS Sierra

  I just install a new one copy Mac OS Sierra, but after that the keys on my keyboard don't work properly as some of the keys do not work yet at all. What can I do to solve this problem, and also if there is any software I can use to test the keys on the keyboard works properly or not

  See if you have enabled mouse keys. Other users have reported that after update to Sierra

  OS x: Impossible to type while mouse keys is enabled - Apple Support

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• Thunderbird does not work properly after copying old content profile in the new profile, what can I do

  My old laptop crashed, but fortunately I got the hard drive out, who now works as an external drive. I installed TB on my new laptop computer. I copied the contents of the old file to profile in the new profile file and start of TB. I have all my files of pace, but TB does nog works correctly. After that connection, it takes forever to load the new messages, when I leave a message to another, the first answer I get is "TB not responding' and after a few minutes, I finally get to the next message. Same story with 'reply' or 'delete '. I already tried to delete the index file and have tuberculosis still indexing message folders, but this did not help.

  I noticed that my old profile files seems to have a sort of double files in the subfolder Mail, old accounts. For example: pop.tele2.nl, pop.tele2 - 1.nl, pop.tele2 - 2.nl. I'm not sure what they are (they seem to hold different versions?) or is it relevant?

  When I search the AppData/Roaming/profiles I'll find it (on the old and the new hard disk as well) but I can not navigate on him (some parents of hidden file)? I checked the rights on the files of my account profile (Administrator rights). I don't know what to do more, so I hope to help.

  Re: for example: pop.tele2.nl, pop.tele2 - 1.nl, pop.tele2 - 2.nl.
  Here's the e-mail accounts for pop e-mail account. If you have several addresses on the same server, it will have the same name but an additional example:-1 appended to the name. If you got an e-mail account, it can also create and add the additional number. Why you have several, I can't say with certainty what caused them without knowing what you have done. The point being, you must have the directory Local pointing to one that is correct and has all your existing emails.

  Profile files are hidden files.
  http://KB.mozillazine.org/Show_hidden_files_and_folders

  Info on profile:
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  What local directory is set to the e-mail account?
  "Tools" > "Account settings" > "Server settings" for the e-mail account
  bottom right under "Local Directory"
  It will say something like this:
  C:\Users\User account name\AppData\Roaming\Thunderbird\Profiles\abc12345.default\Mail\pop.tele2.nl

  Copy paste the info on this issue, so I don't know which e-mail account you use.

  How many email accounts you listed in the left pane in the account settings? You have just the one pop email account and local folders?

  What antivirus do you use?
  If you McAfee please read;

  • https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

  How many emails you have in the Inbox folder?
  It is advisable to use the Inbox folder as a mailbox for incoming mail, and not as a general storage. Suggest you create folders and move all the emails in the Inbox in other appropriate folders, then right-click on Inbox and select "Compact".

  Good info explaining what is compaction and why it is important:

  • https://support.Mozilla.org/en-us/KB/compacting-folders?ESAB=a & s = Compacting & r = 0 & As = s

  It is also a good idea to Archive mail older than a few months.
  Implemented for archive by month and keep the structure of archive folders. These emails will still be visible by 'Archives' folder and in your profile, but check-in will reduce the size of files and therefore less memory use during their opening.
  Info on archiving Options:
  https://support.Mozilla.org/en-us/KB/archived-messages

• Qosmio X 875 - ECO mode does not work immediately after Win 8 upgrade

  I used the upgrade Toshiba Upgrade Wizard to Win 8. He succeeded well uninstall the incompatible software before the upgrade and install the new Toshiba and driver versions after the upgrade.

  I activated the ECO mode, and to my surprise, it does not work as before (in Windows 7):

  * Now, it works with the brightness to level 1 *... very dark. Before, ECO mode allowed me to go up to level 4 and was always considered in Eco mode...

  If I increase the brightness, the 'eco mode is disabled' message opens immediately.

  How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?

  BTW, I am owner of a Qosmio X 875

  Post edited by: qosmitto

  > How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?
  Contact your Toshiba authorized service provider in your country.

  Read this:
  + What is the TOSHIBA eco Utility? +
  http://APS2.toshiba-tro.de/KB0/FAQ2503AT0000R01.htm

  > It changes the brightness of the display of level 4, changes the brightness of the grey screen of level 1 (* 4),.
  _The * 4 means only on models with Windows7 installed _

  I guess that the previous configuration was only Win 7.

  8 win was made for mobile (use of the Tablet), the energy consumption of battery is also very important plant help to win 8. The consumption of the battery must be taken at the lowest level possible.
  So I guess that now help win 8 ECO medium mode and save the power max and long battery life time working at a max level.

• Satellite M40-110: WLan is not working properly after sleep mode

  Hello, I have a M40-110. I have some problems with my wireless adapter. After I closed the screen (bed) and the computer goes into sleep mode, I open the computer screen becomes active, but this time the wireless adapter is not working properly and I can't connect to Internet with my wireless adapter. Sometimes, it seems that the wireless adapter has established a connection, but I can't send and receive data from the Internet. Sometimes after this case, the wireless adapter becomes invalid.

  My Service offered to enable the bios wake-up-on-lan option. After doing this, the Internet worked properly.
  But I am wary about this option:

  (1) not allowing this option cause draining my battery quickly?
  (2) this option doesn't make that hides my hardware failure (wireless card) and it is really necessary to solve this problem?

  Thank you
  Sinan.

  Cool, thanks for the info

• Satellite Pro 6100 keyboard does not work properly after repairs

  Hello

  My 6100 Pro Sam just being away from usual mother board and power Board replacement with Toshiba, but now I have a strange keyboard problem.

  When I turn it on, all the keys are working. After a few minutes, '3' is not working, then 'r' fails, then '5', ' 7 ', ' 8',' 9 ', ' 0' to stop working. At this point, I can feel something very hot under the middle of the keyboard. A reboot and no keys work. Another reboot with the internal keyboard and an external keyboard to the PS2 is still defective (some keys work, others do not), but the outer one works properly.

  Now, if the pc has not obtained if hot as the middle of the internal keyboard, then, I would conclude that the keyboard was defective, but for his failure, slowly and sequentially like this and it fails at the same way every day (since Toshiba rebuild it!).

  Perhaps, internal keyboard controller overheating?
  Anyone know what this could be? :-(

  See you soon,.
  Homer

  Right under the keyboard of your pro 6100 is the VGA graphics controller (the keyboard cable plugs on the same map). It is normal that this part become hot during use.

  It is strange that your problem appears after a while and not immediately.

  It could be just a bad relocation of the keyboard cable (it's a thin layer as a movie negative photo) which easily appears there, but... it may be something more serious, too. (Especially since you had done upgrade where the material had to be changed)

  I consult the service centre once more and ask for instructions how to deal with this. Do not ignore it (using an external keyboard instead of internal dysfunction) because he could end up in something more serious soon...

  Concerning

  chain

  P.S. Please keep us updated on your efforts

• USB and a targus wireless mouse does not work, even after the help of MS tech.support

  Microsoft Tech. checked my pc online to see if I could connect my Targus mouse and its usb device. He said that I can. I still can't activate it

  Hi DebraKennedyUP,

  1. did you last changes made on your computer before the show?

  2. What is the operating system installed on your computer?

  3 - is the same mouse work on different computers?

  Perform the following troubleshooting steps:

  Method: 1

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method: 2

  Run the troubleshooter of material to find exactly the problem.

  Open the hardware and devices Troubleshooter

  Method: 3

  Also, proceed as shown in the following link.

  Hardware devices do not work or are not detected in Windows

  Method: 4

  I suggest you to update the drivers and check how it works.

  Updated a hardware driver that is not working properly

• I get an error saying: "WSOCK32.dll does not work properly" after playing a game on a web site.

  Hey, I'm using windows XP on my IBM thinkpad T40.

  I noticed after playing a game website (don't remember the URL) that my WSOCK32.dll did not work properly.
  It is sending a bunch of errors at startup and saying things are corrupt.
  I think it's a virus, but my scanner come clean. worse yet, I can't play minecraft!
  Please help me...
  original title: WSOCK32.dll errors

  Hello

  -What happens when you try to play Minecraft in the computer now? Do you get any error messages or codes? If Yes, what is the error message or code?
  -What are the exact error messages / complete that appears at startup?
   
  Follow the steps mentioned below and check if the problem persists.
   
  Step 1: I suggest you perform the steps from the link below and check if it helps.
  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista?
  http://support.Microsoft.com/kb/811259
   
  Step 2: To be sure that there is no infection in the computer, you can try running the Microsoft Safety Scanner in it. The following link will help you get:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
  Hope this information helps.