Similar Questions

• Satellite C850 - slow fan speed after BIOS update

  Hello

  So I have my bios Satellite C850-PSKCEV update version 6.80 (I bought my laptop in 2012), about 6 months ago and since then the fan turns at low speed and will never run full speed as before, and therefore, the laptop overheats prematurely and very quickly and even when the laptop is not in use but market it overheat also game isn't possible as any game that I run (even with the smaller settings) Gets a drop in fps every 5 seconds and lasts for 5-10 seconds that makes even the lightest unplayable games, also I have fear of the continuous overheating of components of the laptop.

  I clean the fan and vents the dust and there is not even a particle inside of them and still the fan will not run fast and I can't feel but very slight air flow from the orifice as apposed to tough before this problem.

  Laptop model Toshiba Satellite Ref. C850-A811 PSKCEV-00S00FAR
  Intel Core i5 2450 m - AMD Radeon Hd m 7670
  8.1 Windows 64-bit

  After updating the BIOS, you should enter the BIOS and should load the default settings.

  In addition, you can try to decrease the max CPU to 98-99% performance.

  This can be done in the settings mentioned by Liam and to be honest, this change would not really affect the performance of the laptops.

• Slow down the Audio and keep beat related Sections

  Hello people,

  I have a song that I would like to remix and I all set beat matching.  When I go to slow down the audio I lose my bearings.  Is there anyway that I can keep the sections that I beat matched and slow down the audio so these sections remain?

  For example, that the song is 120bpm and I have this rhythm corresponded perfectly.  If I have a loop of 4 bars and slow down the audio I have more 4 perfect bars.  I want to be able to slow down the audio and still have my bars 4 faultless.

  I hope that makes sense.

  Logic Pro X: using Varispeed to change speed

• HP beats 15 laptop: computer drive HARD failure diagnosis

  Hi people,

  I'm a little angry, I hope one of you lovely people can help me with some advice. My wife tried using the contact HP online support face today, but did not get a useful answer. The laptop in question has still 2 months warranty on this subject and I would like this issue to be fixed before the expiration of the warranty.

  The problem:

  A month or two ago my wife said that the laptop occasionally runs slowly or freezes at random times, then started working again without problem. I'm on the laptop, run scans antivirus, temporary files clear and others with CCleaner, uninstall unnecessary programs and then turn off most of the autobooting services and programs with msconfig. Nothing really came from him, but he did and apparently not having problems while I used it.

  A week later, more complaints that the laptop was running slower than optimal, with another request to examine it. This time he did freeze while I use it, so I run ladies sfc diagnostics and memory, which came to own. Then it was time to try to run through the optimization of windows to speed it up a little.

  Has held a few weeks for me since then, always heard there are problems, but not having is not the opportunity to study.

  Last night I finally get around to running the diagnostics of HP at the start and check out the source (I hope!) of the problem. Hard disk check is coming up with an error indicating that the disk is not healthy, technical Department should be contacted directly. I saved the newspapers to a USB port, I'll post the results in the next post.

  The solution:

  Could I please have some advice on the best way to proceed on this matter now? I'd appreciate any help.

  Kind regards

  Jason

  2015-12-03 22:07:55 =.
  2015-12-03 22:07:55 5.9.0.0 EFI diagnostic system has started
  2015-12-03 22:07:55 load white Options
  2015-12-03 22:07:55 acquired SysDiagsBiosData2011 Configuration variable
  2015-12-03 22:07:55 HP thermal diagnosis Protocol not available
  2015-12-03 22:07:55 ID system: 22A 8
  2015-12-03 22:07:55 BIOS HP Image Interface Protocol Version 2.0
  2015-12-03 22:07:55 found 4 4 active processors, Max 4 processors
  2015-12-03 22:07:55 found 1 absolute pointer or protocols
  2015-12-03 22:07:55 0 found UART peripheral path node.
  2015-12-03 22:07:55 found touchscreen device
  2015-12-03 22:07:55 system family: = 2
  2015-12-03 22:07:55 PlatformLang reported as en-US.
  2015-12-03 22:07:55 selected language is currently (eng).
  2015-12-03 22:08:07 Player library initialization.
  2015-12-03 22:08:07 TscPerSecond = 065238C98h
  2015-12-03 22:08:07 installed protocol commands ATA DTDS
  2015-12-03 22:08:07 Found installed DTD ATA commands protocol supporting Packet orders!
  2015-12-03 22:08:07 found 1 hard drive.
  2015-12-03 22:08:07 drive CHIP 0 supported
  2015-12-03 22:08:07 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B137298) to drive 0
  2015-12-03 22:08:07 found 1 optical disc.
  2015-12-03 22:08:07 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B108C18) to drive 1
  2015-12-03 22:08:07 ATA Total 2 records found
  2015-12-03 22:08:07 no handle found support EFI_EXT_SCSI_PASS_THRU_PROTOCOL (143B7632-B81B-4CB7-ABD3-B625A5B9BFFE).
  2015-12-03 22:08:07 no handle found support EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:08:07 no handle found support LEGACY_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:08:07 1 hard drive Total records found
  2015-12-03 22:08:07 1 total optical disk drives found
  2015-12-03 22:08:07 found 1 hard drives
  2015-12-03 22:08:07 found 1 optical discs
  2015-12-03 22:08:07 ID system: 22A 8
  2015-12-03 22:08:07 system model: = HP Beats 15 Notebook PC
  2015-12-03 22:08:07 system SKU: = K1S17EA #ABU
  2015-12-03 22:08:07 ID system: 22A 8
  2015-12-03 22:08:07 11 Type operating system image:
  2015-12-03 22:08:07 HARD drive 0 model: HGST HTS541010A9E680
  2015-12-03 22:08:07 0 Serial HARD drive: JA100A1F3B5JNM
  2015-12-03 22:08:07 0 ODD model: hp DVD - RW GUB0N
  2015-12-03 22:08:07 STRANGE series 0: M7FEB420920
  2015-12-03 22:08:07 DIMM 0 serial number: 000013A 4
  2015-12-03 22:08:07 DIMM 0 Part Number: AM1L16BC8R2-B1QS
  2015-12-03 22:08:07 BIOS revision: F.43
  2015-12-03 22:08:07 platform Vendor ID: 0 x 1022
  2015-12-03 22:08:07 Platform Device ID: 0 x 1400
  2015-12-03 22:08:07 only a single MEMORY bar (Index 1) is filled on the system
  2015-12-03 22:08:07 found EFI_HP_DIMM_ID_PROTOCOL
  2015-12-03 22:08:07 InitializeCeeLogs - no record found
  2015-12-03 22:08:07 BattInit: Protocol 2010.
  2015-12-03 22:08:07 start graphics system Menu diagnosis
  2015-12-03 22:08:37 quick test of the chosen system
  2015-12-03 22:08:37 calculation time to Test memory
  2015-12-03 22:08:37 total 7399 MB of memory, Free 7285 MB (1865128 Pages)
  2015-12-03 22:08:37 parm buffer allocation
  2015-12-03 22:08:37 case of test Init
  2015-12-03 22:08:37 calculated 0x000000001B9FDAC6 TSC ticks per MB
  2015-12-03 22:08:37 estimated duration total = 2181 s
  2015-12-03 22:08:37 battery test started
  2015-12-03 22:08:37 SmartAdapter: Protocol not available.
  2015-12-03 22:08:37 number of batteries 1
  2015-12-03 22:08:38 BattResetCharger: No.0 (success).
  2015-12-03 22:08:38 BattResetCharger: n ° 1 (success).
  2015-12-03 22:08:41 battery 0 returned 0 x 0000000000000001
  2015-12-03 22:08:42 battery result = 1
  2015-12-03 22:08:42 CPU test started
  2015-12-03 22:08:42 UDM Cpu start test.
  2015-12-03 22:08:42 features BIOS 0x003000093F899880
  2015-12-03 22:08:42 ID system: 22A 8
  2015-12-03 22:08:42 ===========================================================
  2015-12-03 22:08:42 starting CpuDiags.udm version 1.03 built 14 September 2015 10:24:13
  2015-12-03 22:08:42 CpuDiags.UDM full init
  2015-12-03 22:08:49 test complete CPU - result 1
  2015-12-03 22:08:49 Wireless Module check started
  2015-12-03 22:08:49 Wireless Module audit completed - results 1
  2015-12-03 22:08:49 test Board full system - result 1
  2015-12-03 22:08:49 SMART Check started
  2015-12-03 22:08:49 SMART audit end - result 1
  2015-12-03 22:08:49 short DST has begun
  2015-12-03 22:08:53 memory quick check started
  2015-12-03 22:09:02 hard drive DST Code 0: 7
  2015-12-03 22:09:03 hard Drive 0 DST Description: the previous self-test completed having the read element of the test failed
  2015-12-03 22:09:03 tested 20 MB in 10000 ms with 4 processors, the duration of the standardized test is 2000 ms/MB
  2015-12-03 22:09:03 test memory used 5241 Pages
  2015-12-03 22:09:03 check fast memory completed - results 2
  2015-12-03 22:09:03 code DST hard drive 0: 7
  2015-12-03 22:09:03 hard Drive 0 DST Description: the previous self-test completed having the read element of the test failed
  2015-12-03 22:09:03 short completed DST - score 3
  2015-12-03 22:09:03 error code = 0 x 303
  2015-12-03 22:09:03 serial number: 5CD4493T5J
  2015-12-03 22:09:03 guaranteed Start Date: 25/02/2015
  2015-12-03 22:09:03 WarrantyIDString size = 60
  2015-12-03 22:09:03 guaranteed ID = UBV6LF-7HQ7SB-MFPV6K - 60 X 103
  2015-12-03 22:09:03 short completed DST - score 3
  2015-12-03 22:09:03 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:09:03 0 0 17 0
  2015-12-03 22:09:03 0 0 20 1
  2015-12-03 22:09:03 paired FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:09:43 quick test of the complete system
  2015-12-03 22:09:46 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:09:46 0 0 17 0
  2015-12-03 22:09:46 0 0 20 1
  2015-12-03 22:09:46 paired FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:09:51 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:09:51 0 0 17 0
  2015-12-03 22:09:51 0 0 20 1
  2015-12-03 22:09:51 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:09:58 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:09:58 0 0 17 0
  2015-12-03 22:09:58 0 0 20 1
  2015-12-03 22:09:58 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:10:11 way to unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:10:11 0 0 17 0
  2015-12-03 22:10:11 0 0 20 1
  2015-12-03 22:10:11 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:10:22 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:10:22 0 0 17 0
  2015-12-03 22:10:22 0 0 20 1
  2015-12-03 22:10:22 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:10:31 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:10:31 0 0 17 0
  2015-12-03 22:10:31 0 0 20 1
  2015-12-03 22:10:31 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:10:36 Road Management of BIOS HP EFI
  2015-12-03 22:10:42 uninstall DTD ATA commands of Protocol
  2015-12-03 22:10:42 out of System Diagnostics
  2015-12-03 22:19:19 =.
  2015-12-03 22:19:19 5.9.0.0 EFI diagnostic system has started
  2015-12-03 22:19:19 load white Options
  2015-12-03 22:19:19 acquired SysDiagsBiosData2011 Configuration variable
  2015-12-03 22:19:19 HP thermal Diagnostic Protocol is not available
  2015-12-03 22:19:19 system ID: 22A 8
  2015-12-03 22:19:19 BIOS HP Image Interface Protocol Version 2.0
  2015-12-03 22:19:19 found 4 4 active processors, Max 4 processors
  2015-12-03 22:19:19 found 1 absolute pointer or protocols
  2015-12-03 22:19:19 0 found UART peripheral path node.
  2015-12-03 22:19:19 found touchscreen device
  2015-12-03 22:19:19 system family: = 2
  2015-12-03 22:19:19 selected language is currently (eng).
  2015-12-03 22:19:21 Player library initialization.
  2015-12-03 22:19:21 TscPerSecond = 065239E32h
  2015-12-03 22:19:21 installed protocol commands ATA DTDS
  2015-12-03 22:19:21 found installed DTD ATA commands protocol supporting Packet orders!
  2015-12-03 22:19:21 found 1 hard drive.
  2015-12-03 22:19:21 drive CHIP 0 supported
  2015-12-03 22:19:21 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B137298) to drive 0
  2015-12-03 22:19:21 found 1 optical disc.
  2015-12-03 22:19:21 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B108C18) to drive 1
  2015-12-03 22:19:21 2 ATA Total records found
  2015-12-03 22:19:21 no handle found support EFI_EXT_SCSI_PASS_THRU_PROTOCOL (143B7632-B81B-4CB7-ABD3-B625A5B9BFFE).
  2015-12-03 22:19:21 no handle found support EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:19:21 no handle found support LEGACY_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:19:21 1 hard drive Total records found
  2015-12-03 22:19:21 1 total optical disk drives found
  2015-12-03 22:19:21 found 1 hard drives
  2015-12-03 22:19:21 found 1 optical discs
  2015-12-03 22:19:21 ID system: 22A 8
  2015-12-03 22:19:21 system model: = HP Beats 15 Notebook PC
  2015-12-03 22:19:21 system SKU: = K1S17EA #ABU
  2015-12-03 22:19:21 ID system: 22A 8
  2015-12-03 22:19:21 11 Type operating system image:
  2015-12-03 22:19:21 0 model HDD: HGST HTS541010A9E680
  2015-12-03 22:19:21 0 Serial HDD: JA100A1F3B5JNM
  2015-12-03 22:19:21 ODD 0 model: hp DVD - RW GUB0N
  2015-12-03 22:19:21 STRANGE series 0: M7FEB420920
  2015-12-03 22:19:21 DIMM 0 serial number: 000013A 4
  2015-12-03 22:19:21 DIMM 0 Part Number: AM1L16BC8R2-B1QS
  2015-12-03 22:19:21 BIOS revision: F.43
  2015-12-03 22:19:21 platform Vendor ID: 0 x 1022
  2015-12-03 22:19:21 Platform Device ID: 0 x 1400
  2015-12-03 22:19:21 only a single MEMORY bar (Index 1) is filled on the system
  2015-12-03 22:19:21 found EFI_HP_DIMM_ID_PROTOCOL
  2015-12-03 22:19:21 BattInit: Protocol 2010.
  2015-12-03 22:19:21 from Menu of Diagnostic graphics system
  2015-12-03 22:19:26 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:19:26 0 0 17 0
  2015-12-03 22:19:26 0 0 20 1
  2015-12-03 22:19:26 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:19:32 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:19:32 0 0 17 0
  2015-12-03 22:19:32 0 0 20 1
  2015-12-03 22:19:32 set match FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:19:34 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:19:34 0 0 17 0
  2015-12-03 22:19:34 0 0 20 1
  2015-12-03 22:19:34 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:20:14 way to unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:20:14 0 0 17 0
  2015-12-03 22:20:14 0 0 20 1
  2015-12-03 22:20:14 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:20:20 uninstall DTD ATA commands of Protocol
  2015-12-03 22:20:20 out of System Diagnostics
  2015-12-03 22:24:13 =.
  2015-12-03 22:24:13 5.9.0.0 EFI diagnostic system has started
  2015-12-03 22:24:13 load white Options
  2015-12-03 22:24:13 acquired SysDiagsBiosData2011 Configuration variable
  2015-12-03 22:24:13 HP thermal diagnosis Protocol not available
  2015-12-03 22:24:13 system ID: 22A 8
  2015-12-03 22:24:13 BIOS HP Image Interface Protocol Version 2.0
  2015-12-03 22:24:13 found 4 4 active processors, Max 4 processors
  2015-12-03 22:24:13 found 1 absolute pointer or protocols
  2015-12-03 22:24:14 0 found UART peripheral path node.
  2015-12-03 22:24:14 found touchscreen device
  2015-12-03 22:24:14 system family: = 2
  2015-12-03 22:24:14 selected language is currently (eng).
  2015-12-03 22:24:16 Player library initialization.
  2015-12-03 22:24:16 TscPerSecond = 065239F87h
  2015-12-03 22:24:16 installed protocol commands ATA DTDS
  2015-12-03 22:24:16 found installed DTD ATA commands protocol supporting Packet orders!
  2015-12-03 22:24:16 found 1 hard drive.
  2015-12-03 22:24:16 drive CHIP 0 supported
  2015-12-03 22:24:16 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B137298) to drive 0
  2015-12-03 22:24:16 found 1 optical disc.
  2015-12-03 22:24:16 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B108C18) to drive 1
  2015-12-03 22:24:16 ATA Total 2 records found
  2015-12-03 22:24:16 no handle found support EFI_EXT_SCSI_PASS_THRU_PROTOCOL (143B7632-B81B-4CB7-ABD3-B625A5B9BFFE).
  2015-12-03 22:24:16 no handle found support EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:24:16 no handle found support LEGACY_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:24:16 1 hard drive Total records found
  2015-12-03 22:24:16 1 total optical disk drives found
  2015-12-03 22:24:16 found 1 hard drives
  2015-12-03 22:24:16 found 1 optical discs
  2015-12-03 22:24:16 ID system: 22A 8
  2015-12-03 22:24:16 system model: = HP Beats 15 Notebook PC
  2015-12-03 22:24:16 system SKU: = K1S17EA #ABU
  2015-12-03 22:24:16 ID system: 22A 8
  2015-12-03 22:24:16 11 Type operating system image:
  2015-12-03 22:24:16 0 model HDD: HGST HTS541010A9E680
  2015-12-03 22:24:16 HDD 0 Serial: JA100A1F3B5JNM
  2015-12-03 22:24:16 ODD 0 model: hp DVD - RW GUB0N
  2015-12-03 22:24:16 series 0 ODD: M7FEB420920
  2015-12-03 22:24:16 DIMM 0 serial number: 000013A 4
  2015-12-03 22:24:16 DIMM 0 Part Number: AM1L16BC8R2-B1QS
  2015-12-03 22:24:16 BIOS revision: F.43
  2015-12-03 22:24:16 platform Vendor ID: 0 x 1022
  2015-12-03 22:24:16 platform Device ID: 0 x 1400
  2015-12-03 22:24:16 only a single MEMORY bar (Index 1) is filled on the system
  2015-12-03 22:24:16 found EFI_HP_DIMM_ID_PROTOCOL
  2015-12-03 22:24:16 BattInit: Protocol 2010.
  2015-12-03 22:24:16 from Menu of Diagnostic graphics system
  2015-12-03 22:24:19 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:24:19 0 0 17 0
  2015-12-03 22:24:19 0 0 20 1
  2015-12-03 22:24:19 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:24:42 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:24:43 0 0 17 0
  2015-12-03 22:24:43 0 0 20 1
  2015-12-03 22:24:43 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0

  Hi Jason,

  The hard drive is indeed a failure and needs to be replaced - just contact HP and make arrangements for this under warranty.

  The section of the report you cite is UBV6LF-7HQ7SB-MFPV6K-60 X 103 because this will confirm the diagnostic failure with software HPs.

  If you live in the United Kingdom, contact HP here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• best practices to increase the speed of image processing

  Are there best practices for effective image processing so that will improve the overall speed of the performance? I have a need to do near real-time image processing real (threshold, filtering, analysis of the particle/cleaning and measures) at 10 frames per second. So far I am not satisfied with the length of my cycle so I wonder if he has documented ways to speed up performance.

  Hello

  IMAQdx is only the pilot, it is not directly related to the image processing IMAQ is the library of the vision. This function allows you to use multi-hearts on IMAQ function, to decrease the time of treatment, Arce image processing is the longest task for your computer.

  Concerning

• Recommend me a scanner with OCR good & speed reasonably good scan.

  Hello

  I used to have HP F2200 printer/scanner, OCR has been fantastic. It scanned perfectly. The user interface is so intuitive. In front, the OCR of this old model even beat the current Canon scanner. I bought the scanner Canon only returned because the OCR was not commensurate.

  Because of my previous good experience with HP scanner, I decided to upgrade to a new.

  I bought the HP Envy 4504 - so disappointed to realize that OCR is not part of it more. I read in the forums that OCR is not part of all software more.

  What I want to know now is what HP scanner

  -comes with OCR (IE I don't have to buy separately the OCR), preferably using the same as the HP F2200 OCR product. Not sure if it's Iris.

  -Speed of a better scan than F2200, but does not need to be super fast.

  -do not require a document feeder. I'm especially scanning books for document feeder probably won't be very useful.

  Thank you.

  Hello

  Normal scanner is to scan only what is different with an AiO (or multi funstion) printer. In the list, I would buy the "Hewlett - Packard SCANJET G4010 PHOTO SCANNER", it has more functions and depth is much better then aothers. There IRIS too (SCANJET G3110 didn't).

  Kind regards.

• Disconnecting from drive external hard usb 3.0 on win 8.1 - HP Beats

  I have the special edition beats 15-p058n and my USB 3.0 WD My Passport which works fine on Windows 7 3.0 is connecting / disconnecting constantly every 10 seconds or more.

  I checked the internet and found that so many similar problems could be a combination of hardware and Windows 8.1?

  I tried to turn off except setting for usb root hubs in Device Manager to see if it's the extra cost to the voltage which gives the USB 3, but it did not work.

  I'm still in my period of return of 14 days and thereby, and the disappointment in speed it can lead me to look for a better unless you can throw a little help?

  See you soon

  Matt

  Device and its tested on Desktop PC 3 USB cable and 2 - Working Fine

  Device and cable to Y tested on Desktop PC USB 3 and 2 - Working Fine

  Device tested on a USB 2 on laptop with its own and the cable in there - works fine

  Device tested on the front of portable USB 3 with its cable and cable in there - device not recognized in windows, although peripheral power.

  Device tested on second USB 3 laptop with its cable - device connects and disconnects constantly.

  Device tested on the second laptop USB with cable 3 Y and extra power to the 3 USB port on the front - device works and appears to be stable, doesn't not abandoned or disconnected in the 30 minute test carried out, ran video and copied files...

  If it works now, download video files at 30 MB/s (not sure if it's the speed of the usb 2 or 3), but works on this configuration port config now.

  In the meantime I have USB, HID and mass storage USB device in the device via the "EnhancedPowerManagementEnabled" registry Manager entry to 0, so do not know if this helped as when I tried a few weeks ago, the cable in there did not work in this configuration.

  I guess the issue is the installation of low-power hardware HP needing two ports, coupled with the 'smart' power management settings Microsoft has done in point 8.1, it's not ideal, but it works.

  Thank you for your assistance.

• romoval fixed particles

  Lets imagine that we measure the size of the stream of movement of particles. Some of them, or just a particle of dirt that adheres to the surface of the window and is counted almost all time (image).

  Y at - it VI or what would be the suggestion how to exclude static particles of the statisctics (analysis).

  You use in levels of gray or binary images?

  For binary images, you can keep several old pictures and use AND combine them in a mask.  The mask can be reversed and then with the current image.  Only fixed particles would be in the same place in all images.  It is easiest to store a circular buffer of 10 images.  I replace the oldest picture about once per second, and then regenerate the mask from the ten images.  This would keep only of fixed particles which have not changed in the last ten seconds.

  If you are post processing, you might get a little fanciful.  You can create the mask by combining images before and after the current frame.  This could be a tighter window, perhaps a second before and after, to identify the fixed particles.  The ideal spacing between the images of reference depends on the size of particles, the speed of the particle, and possibly other factors.

  For grayscale images, you can use MIN to combine images instead of AND, assuming that the white particles on a black background, then subtract the mask of the current image image to remove fixed particles.

  Bruce

• DV6-6135dx: Beats Audio

  the HP laptop is doing well... I had to reduce some of the settings in the game in the need for speed in 2012... and its relly good after that... my Question is, is it Bass speakers?... because I can see the parameters of beats, but even if I put the BASS bar all the way up to... There is no difference even with the headphones pluged... can you please advice me...

  Concerning

  Hello @Raymond69 ,

  Thank you for your response.

  I regret that the update of the pilots did not help and you have lost your heartbeat symbol on your task bar.

  Have you checked against viruses and malware?

  I would try to install the original drivers using the Recovery Manager.

  Computers HP - using the Recovery Manager to restore the software and drivers (Windows 7).

  If the problem persists, I suggest you do a recovery in factory.

  HP computers - performing a recovery of system HP (Windows 7)

  During the recovery, there is an option to backup your personal files to avoid data loss.

  HP computers - restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  You can contact HP support for assistance at any time.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• HP Envy 6 t 1000 - Intel Rapid technology fails to speed up drive.

  I did a clean install of Windows 8 on a HP Envy 6 t CTO 1000.  I followed the instructions online to the 'letter '.  However, when I go to accelerate my primary hd with technology Intel Rapid Storage Technology I continually get a failure to speed up the drive.  The mSata drive appears fine in the TSRI program but, regardless of what version of the program/driver I try I failures continue to accelerate the disk Windows 8 OS actuay.

  Here is the link to a PDF file, provided by HP, that I followed completel (new installation).

  http://WWW8.HP.com/us/en/PDF/CNB003EN_tcm_245_1315624.PDF

  Currently I have Intel Rapid Storage Technology worm technology. installed 11.6.0.1030.  And Yes, I tried (even if it was difficult to find) the version that has been specified in the PDF file.  No work.

  In addition, the list of the drivers for my laptop, installed with Windows 8, is pathetic.  In the PDF document, it says how to get all the drivers for Windows 8 after installation.  Well, that's very good and fantastic when there are real drivers to download and install.  There is almost nothing on Windows 8 drivers for my laptop.  Currently, I don't have audio Beats works, because there is no driver.  Coolsence does not work, because there is no driver, I have not installed any kind of chipset drivers (which are usually quite important) or the other.

  This notebook is not so old (purchased 10/09/12 with Windows 7 Pro).  Horrible support for Windows 8 drivers for this laptop.  Is there any ETA actually get some drivers?

  I really want to get the Intel Rapid Storage Technology technology to function as definitively, I noticed a drop in performance as compareed to when I had installed Windows 7 the technology was working.

  Any help on that would be great.  I have not really found any kind of definitive answer or fix it with all my websearching...

  Thanks in advance for any help!

  Not sure how to close this, but I managed to solve this problem, no thanks to HP.  I was able to find a person on the forums of Intel who had the same problem.  Apparently this happens by installing only Windows 8 with a sustained UEFI bios.  3 partitions will be created with this type of installation.  What I discovered by reading thru intels forums, is that if you reduce the c: drive, then reboot, you are able to the acceleration of the main hard drive successfully.   The posters think it's that something happens on the MBR when you make this change.  Don't know what, but it fixed my problem.  Its been frustrating me for a while.

  Everything works great now and I noticed definetley a speed/response increase with my laptop.

  What to do:

  1 resize your c:\ drive.  (Does not need to be much more, I took 20 MB)

  2. restart your PC

  3 try to accelerate your main OS drive

  4 viola!

  so happy now.

• Pavilion dm4t Beats Edition: CPU temperature

  I applied thermal paste two times for my processor Intel Core i7 - 2640M CPU (Sandy Bridge 4 MB L3 Cache, TDP of 35W).  I cleaned the cooling fan and followed the instructions of cleaning and the applications of the dough.  I used the thermal paste BD hardware House.  I also use a deep Cool Multi Core X 6 Notebook Cooling Pad.

  The fan continues to run at high speed when I'm on the internet, usually when viewing videos.  Subsequently, Firefox or IE slows to a crawl and do not answer.  I think it's due to the temperature of the CPU.  Norton 360 can't find any issues and regularly optimizes the computer (Pavilion dm4t Beats Edition).  I downloaded an app to CPU temperature and saw as high as 90-95 ° C time.

  What is the good thermal paste to use?

  Don't you think that the temperature of the CPU is the casue of the internet software issue?

  Y at - it an upgrade of the internal fan of higher capacity?

  Suggestions, please.

  I cleaned the fan & events last weekend.  Everything was very clean.  I actually empty the events each week.

  I looked in the Task Manager while using Firefox & followed the CPU temp:

  Firefox was using 38% of the resources CPU & Flashplayer 10% with the CPU 44% charged and with a temperature of 90 c.

  I also orderd thermal paste another (GELID Solutions GC EXTREME).

• Speed max and the capacity of RAM of Pavilion dv6

  Hi guys,.

  I don't know, you have been asked before, but each post I find little answers my question, but not exclusively:

  What is the maximum speed and the RAM capacity can put in my Pavilion dv6 (Beats edition)? Completely factory standard

  I want the fastest and most large amount of RAM I can get (I'll make heavy photo editing) and then I put a SSD in as well?

  HP Pavilion dv6 Notebook PC

  Windows 7 Home Premium 64-bit Service Pack 1

  Intel Core i3 - 2330 M CPU @ 2.20 GHz

  RAM:

  Slot 1: 2 GB SODIMM Hynix 1333 MHz

  Slolt 2: 4 GB SODIMM Samsung 1333 MHz

  Radeon (TM) HD 6490 M

  Motherboard: 17F9 10.5 A

  BIOS: F.1B

  Sincere greetings

  Justin

  You are the very welcome, Justin.

  Yes, that's correct. 2 x 8 GB PC3-10600 memory.

  Memory will not run any more quickly than the FSB of the processor. Your CPU FSB is 1333 MHz.

  For example: If you have installed 2 x 8 GB PC3-12600 (1666 MHz) memory, he would go only to 1333 MHz.

  I don't think that there is no outside but except DDR5 memory in video cards.

  But you can not mix DDR memory types, because they work with different voltages and the notches are cut at different places on DDR, DDR2, and DDR3 memory modules to prevent someone to install the bad memory in the PC and damage memory, motherboard or both because of the different voltages they run on.

  Best regards

  Paul

• After 7 months of use, the letters on my computer laptop Audio Beats are fading. How do I get replacements?

  My Beats Audio Pavilion dm4 Notebook PC has touches of Red transparent backlight letter/number. The paint on the keys is fade after 7 months of use and many of the keys are no longer recognizable.

  Is it possible to get 'standard' for these keyboards replacement keys? Or will I just this problem once again in 7 months after the warranty replacement of these worn keys.

  HP could have solved this problem with a possible recall?

  How to get warranty with HP service if I am able to replace the caps key myself?

  Thanks in advance for any help possible.

  More that likely, the keyboard as a whole would be replaced.

  If it is under warranty, HP can be contacted at 1-800-474-6836 the Canada and the United States.  Otherwise, start here.

  The following link can help speed up the appeals process by collecting advance information.

  Technical Support case HP formula call: https://h10025.www1.hp.com/ewfrf/wc/phoneInput?cc=us&dlc=en&lc=en&product=5061082

• Beat HSRP query

  We have a facility at a client, in which case a Cisco 887-GOES-K9 and a 887-GOES-SEC-K9 Cisco are all connected to their own ADSL connections in our clients MPLS cloud.

  We have HSRP running sideways LAN between these routers and the active router (SEC - K9) keeps track of our MPLS sponge (10.10.10.1) address. The HSRP priority will increase from 110 to 80 if the tracker goes down.

  The configuration is the following:

  Configuration (887-GOES-SEC-K9)

  follow 123 accessibility of als 1 ip

  auto discovering IP sla
  ALS IP 1
  10.10.10.1 ICMP echo source-interface Dialer0
  frequency 10
  IP SLA annex 1 point of life to always start-time now

  interface Vlan1
  IP address 192.168.1.252 255.255.255.0
  NBAR IP protocol discovery
  sleep 10 ip 192.168.1.254
  standby priority 10 110
  10 standby preempt
  waiting 10 to see 123 decrement 30

  Watch Config (887-SEC-K9)

  interface Vlan1
  IP 192.168.1.253 255.255.255.0
  NBAR IP protocol discovery
  sleep 10 ip 192.168.1.254
  10 90 standby priority
  10 standby preempt

  Our client is not is not complaining of any performance issues. However when I look at the logs of the primary, I see severe HSRP beat.

  June 10-13:21:16 CEST: % FOLLOW-UP-5-STATE: accessibility of als 1 ip 123 Up-> down
  June 10-13:21:16 CEST: % HSRP-5-STATECHANGE: Vlan1 Grp 10 active state-> Speak
  June 10-13:21:21 CEST: % FOLLOW-UP-5-STATE: accessibility of als 1 ip 123 Down-> Up
  June 10-13:21:22 CEST: % HSRP-5-STATECHANGE: Vlan1 Grp 10 State Speak-> Active
  June 10 at 13:36:26 CEST: % FOLLOW-UP-5-STATE: accessibility of als 1 ip 123 Up-> down
  June 10 at 13:36:28 BST: % HSRP-5-STATECHANGE: Vlan1 Grp 10 active state-> Speak
  June 10 at 13:36:31 CEST: % FOLLOW-UP-5-STATE: accessibility of als 1 ip 123 Down-> Up
  June 10-13:36:34 CEST: % HSRP-5-STATECHANGE: Vlan1 Grp 10 State Speak-> Active

  My understanding of the above config is that assets will be poll IP MPLS sponge at intervals of 10 seconds using ICMP. However based on the log above, it seems that the active router detects that a ping fails 13:36:26 but realizes then he returned at 13:36:31 only 5 seconds later. But if only, he asks every 10 seconds, wouldn't he at LEAST 10 seconds until what he questions again to see that it is?

  Given the length and line noise on some of these sites MPLS, a small piece of packet loss and reduced speed is acceptable. However, I want to assure you that I understand perfectly followed works before I watch his sensitivity to allow perhaps more tolerance of adjustment.

  Thanks for any help in advance. :)

  Hello

  Tracking queries ip SLA I think that every 5 sec (not sure on that) and your sending a ping every 10 seconds via ip sla

  So if als Miss ping then the follow-up question again before an another sla ping and the follow-up will kick down your state of hrsp.

  You have verified that the destination address sla is indeed available, then maybe try adding a delay to the State track down.

  follow 123
  deadline 30 down

  RES

  Paul

• HP HP Pavilion dm4-3002ea Beats edition, the strange fan noise

  Hey guys first post so sorry if this isn't the correct procedure to indicate the problem or the right section!
  I have a HP Pavilion dm4-3002ea beats edition laptop, bought about a year and a half (so out of warranty).

  Now, the problem of the half that I have is a terribly strange fan noise coming from the laptop ONLY when it was hibernation, it is Purring away while I'm typing on it now, fan works fine, no overheating or issues like that, I can game, leave it on for hours etc its perfectly fine. The only problem is in hibernation it! I always put in hibernation in order to keep all my work of University ready to leave when I'm back on it, with all my tabs and such always opens on the sections, I need. It is very good that he hibernates without problem. Its when I go and turn it back on, it makes a vibration noise which I assume is the fan for about 15-20 seconds (?) as his recovery after hibernation and then is perfectly fine once more. He never did this noise after the sequence of the hibernation, or when I restart it. It's awfully strange and something I want to just make sure is not a real problem that I need this laptop for my university work. I can only assume, is the fan that makes noise, but it could be the HARD drive maybe? Not too sure on this one. He never blue screens etc, the HDD works fine so I'm really at a loss here! Any advice would be appreciated.
  Also I tried to clean the air fan, but I did not dare in disassemble correctly yet because it looks pretty complex of youtube, resembles access sick fan have to jump off the keyboard and the back which is a lot of effort. But if it goes bad opens and take a peek! I would like to know what it is, but I don't want to tinker with the bowels, as I used to do with my old laptop so its something stupid that is easily fixed! Also I always Hibernate it instead of closing it down, but being quite computer should not do lasting damage, I'm good? I mean he puts just the data disk HARD ready to be accessed the next time I turn it on? But hurt close more if this will help!
  Another quick problem which is pretty stupid because it is a HP Beats edition... half the speakers do not work on the right side of the laptop! Ironically, good! I'm not too fussed as its plugged in speakers on my desk, most of the time, but still it's pretty boring, as well. It creaked and went off one day and then he jumped several times on but now seemed to give up! The other side works well, reinstall all drivers etc to make sure that it isn't is not material, so I guess a loose cable? Pretty stupid, really, but still I guess another reason for me to break open and get to the bottom of this! As laptops out of warranty and I don't really want to take to a store of the laptop, in the hope of an old House of the noise of the fan if possible challenge! Speakers aren't that big a deal as always half works very well.

  If necessary, these specifications:

  HP Pavilion dm4-3002ea
  Windows 7 64 bit
  Intel i5 2450M 2.50 Ghz processor

  12 GB of Ram (I have added 8 gb on ago about 6 months so the amount)

  750 GB HARD drive.

  Congratulations to all!

  Hi Jack_DM4

  If I understand correctly you are updated, but we have still the sound issue only with the laptop not on devices so it looks like that the speakers on the right side of your laptop may be missing and vibration is still ongoing with the fan, but only when it starts first to the top that looks like a balancing problem.

  These two problems are hardware related but will not cause any damage to your computer. The speakers can be replaced if you choose by contacting HP here parts store and you place your order of new speakers and their replacement. If you are under warranty I would get fixed under warranty.

  The problem of vibration is just the fan rebalance itself when it starts first to the top once it gets to the speed of the passing air forces hovering in the centre of balance so he and when he settles down if imbalance. If you can deal with noise very well, otherwise you can order a new one from the link above HP parts store.

  If you are still under warranty I would strongly suggest that you get the notebook repaired under warranty as you may void the warranty if you open the notebook. If this is the case

  I think it would be best if you contacted technical support HP for repair options.

  Link US support for contact options for portable computers purchased in the United States.

  Link to American support outside of the contact options for laptops purchased outside the United States.

  Thanks for posting on the HP Forums and please feel free to re-post if you have any questions or concerns. Have a great day!