Speed max and the capacity of RAM of Pavilion dv6

Similar Questions

• Radeon HD 6490 m and the completely gone my computer Pavilion DV6 Catalyst Control Center

  Hello

  I use a HP Pavilion dv6-6041tx laptop with Win7.

  I recently tried restoring my AMD display since a recent update driver, so I used the method that I used to install it:

  http://www.hardwareheaven.com/Mobility-Radeon-drivers-support/206549-ATI-Catalyst-mobility-11-12-DIS...

  Once I had finished this procedure, I rebooted my computer to know that I couldn't run windows normally, because I just got a black screen. I could run Safe Mode but I went and performed a restore of the system at a time of before I tried to roll back. This fixed the display problem, but I still couldn't find the graphics card. I looked in Device Manager and nothing helps I couldn't find it. I can not also put graphics, as I mentioned the CCC has disappeared. Please help me, it's so devious having all these games I can't play now.

  Oh and I've also updated all, then Yes, telling me to update won't really help.

  Please help me!

  Hello

  Let me know what happens if you download and install the driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

  After installation, restart the laptop.

  Kind regards

  DP - K

• Pavilion dv7-6b32us - max and the type of RAM I can install it?

  Hello

  For the pavilion dv7-6b32us, which is the type and maximum RAM I can install?

  The manual says it can go up to 16 GB, but I don't see that 8 GB (4 x 2) available for sale in the world.  We do not know also what type I need.

  Thank you...

  Hello

  Please check this:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+dv7+series/Pavilion+dv7-6b32us-upgrades.html

  You can buy from them or use the information to buy elsewhere

  Kind regards.

• Difference between file system capacity and the capacity of the disks in Capacity Planner reports

  Hello

  I had to go on my Capacity Planner tool training soon, but I have a question on the front that frustrates me. In the evaluation report that comes out of the tool after the analysis, a use of disc section, which lists all the servers for analysis there. A column of this report is directed to file system capacity, another disk capacity. In all cases, the first is less than the latter. What is the exact meaning of these labels?

  Some of the numbers differ substantially between the columns, for example 20 GB for a capacity of 36 GB of disk space for a server and file system. He said that only 20 GB to 36 GB disk is formatted/partitioned to use?

  As previously stated:

  Disk capacity is 36 GB - physically, there are 36 GB of storage.

  File system is logical capacity - the amount of space used by files on the disks.

  File system and the capacity of the disks will never match because fees General table of file.

  I hope this helps.

  -abe

  INTEGRITAS!

  Abe Lister

  Just a guy who likes to virtualize

  ==============================

  Won't lie. I like points. I mean, if something useful for you, consider slipping a few points for him!

• months Max and the year of the table

  Hello
  
  I need to get the months max and the year of a table.

  DESC WHR_REPORT
  REPORTMONTH   NUMBER(2)
  REPORTYEAR    NUMBER(4)

  Sample data in table
  reportmonth    reportyear
  01              2009
  02              2009
  03              2009
  04              2009
  09              2009
  12              2009
  01              2010
  02              2010

  How can I get the date max which means 022010 table?
  
  Thank you
  Sandy

  select max(to_date(to_char(reportyear) || lpad(to_char(reportmonth), 2, '0'), 'yyyymm' ) )
  from whr_report
  
  or
  
  select reportyear, reportmonth
  from
  (
  select reportyear, reportmonth, row_number() over (order by reportyear desc, reportmonth desc) rn
  from whr_report
  )
  where rn = 1
  

  I forgot to lpad around month

  Published by: bluefrog on June 10, 2010 15:59

• Where can I download the latest graphic driver HP Pavilion dv6 6051?

  Hello! Where can I download the latest graphic driver HP Pavilion dv6 6051? Graphics card is the Radeon HD6770M and integrated into Core i5 graphics. Support AMD told me for him ask the laptop manufacturer.

  Hello:

  It is the latest version of the driver that HP has for your laptop.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102011-1&CC=US&DLC=en&LC=en&os=4063&Product=5081020&sw_lang=

  He most recent are not available.

  Paul

• Satellite M45-S169 - overheating and the upgrade card RAM/graphics

  Hello

  I have need some answers and solace to the questions I have on my laptop. Here are the following questions:

  Laptop overheating fast enough, hereby, I mean in about 10 minutes, the laptop Burns upward. It is the model or is there something wrong with it? I can't keep the laptop without maintaining that it plugged into the wall at all times. That this has something to do with my battery like that I need a new?

  I am able to install the new RAM * (2 GB Max) and if yes, someone knows how it slots are for this model? (Not really opened to check because I'm bad to put things together after taking them apart)

  I am able to install a new graphics card for the laptop or I'm stuck with ATI RADEON XPRESS 200 M Series? (and if it is not too much to ask, is the graphics card, I have good, bad, or so - so)

  Sorry if there are too many questions, but it would be really nice if I get the answers to all these.

  Hi Honu_2,

  (1.) you should clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans and read this article please:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

  2.) Yes, it seems that you need a new battery if your laptop only works with AC/DC adapter connected.

  3.), you should check your owner's manual. As far as I know this model supports up to 2 GB of RAM. This means that you can install 1 GB into the two slots.

  (4.) the graphics card upgrade is not possible because it s/set soldered on the motherboard and your laptop is designed only for the preinstalled graphics card.

  By the way: these questions are already answered here. Check out the forum for similar topics, you will find many interesting things! ;)

• Cisco-AIR-SAP3702I-A-K9, max and the degradation of bandwidth users?

  Hello

  Sorry if somone is asked this question before, but I was unable to find the answer or by mail.

  So here's the intro:

  Symthom:

  I installed and config with a 1240 AP G base still running the office to provide wireless connectivy, but users complain its slow.

  Note: I went to check the PC users and a simple website with some pictures or even to test the connection speed, it is so slow

  Action:

  I changed the AP with a new AIR-SAP3702I-A-K9, just basically, I copied and pasted the config by applying appropriate measures, like changing the fastethernet gigaethernet, etc..

  It has improved a little, but I followed the PA and there are 3 SSID. each SSID was like around 6 users, for a total of 18 users.

  Results:

  Sound still give the same results, he suddenly became so slow but sometimes its execution by the customer well, but relatively slow always.

  ******************************************************************************************************************************************************

  Additional information and troubleshooting of the measures taken:

  We have 100 Mbit/s, so its quite a lot of bandwidth and we use even to an all-time high of the day around 35Mbps. I went to test my PC local, changed to vlan and use the same vlan as the SSID to establish a speed test and I got about 98 MB/s and ping results is 2ms.

  So that tells me that it is not the internet connection I have download file size of 2 GB in a couple of minutes cable using the same subnet, but in the wireless, it says it will take 2 hours to download a file of 200 MB in size.

  I know that it is a shared, but I need more information that I'm not an expert in configuration or give a good explanation as to why the wireless is so slow.

  I'm always conflicted with my classmates because they say that it is the access point, and that I should try only on PC wireless on the AP and check the results of the bandwidth.

  They say I should get 100 Mbps

  ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

  Help in the following:

  Who can tell me what is the maximum number of clients by this type of device (3700 AP series) or recommended?

  Can what kind of measures I take to reduce this problem?

  Who can tell me what is the bandwidth usage max for this AP?

  They are correct, as if the AP with a connected users, should get the same huge amount of bandwidth or would be less?

  Is it true that if a user is streaming and others want to suft normally, it will reduce the bandwidth?

  What is the bandwidth max an AP can use or by customer taking into account that we have 100 Mbps?

  Location: it's just a simple room with the inside AP, nothing special.

  I've included the AP basic config. Any additional info, please let me know,

  Here is the test that I made using the local wired in the same subnet as the SSID and I get good bandwidth.

  

  Thank you very much!

  Hi Alex,

  1. first of all, a rule, you can use 25 users in a single (). If there is a normal traffic such as e-mail...).

  First troubleshooting:

  you use wpa version 1 for all SSID. You must use WPA version 2 to get 802.11n rates (Higher).

  So I'm changing your configuration, please check.

  Concerning

  Remember messages useful rates

• Satellite L500-1ZP - key to enter the BIOS version 2.10 and the upgrade of RAM

  Hello

  I have two questions:

  1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  However, it seems that I can't enter the BIOS more.

  I tried several buttons, but it just won't let me get bios of the laptop more.
  Which button to use to access the BIOS?

  2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  Are there recommended RAM sets should I use because of compatibility issues?

  Thanks in advance for any help.

  Kind regards.

  > 1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  > However, it seems that I can't enter the BIOS more.

  To access the BIOS press F2 at the beginning of the order started immediately after you have switched on the device, press F2 (press several times on the line)

  > 2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  > Are there any sets recommended RAM should I use because of compatibility issues?

  Toshiba Satellite L500-1ZP laptop takes the type of RAM SODIMM SDRAM PC3-8500 DDR3-1066 MHz 204pin. I would recommend the manufacturer Kingston modules.
  Value report great price

• Extremely slow camera in MAX and the software response

  I am in the process of upgrading from a piece of test equipment that uses two firewire cameras.

  Currently, the software is written in LabVIEW 7.1, it uses NEITHER IMAQ and is quite catchy, with little perceptible delay in the passage between the cameras in the software. Same MAX opens up the cameras relatively quickly and you can turn on or take a few seconds of clicking cameras and quickly change between cameras.

  Without changing the external hardware to the computer, but with a new windows 7 PC in place and update the software to use OR-IMAQdx simply by replacing the IMAQ works with IMAQdx in 2014 of LabVIEW and install the latest version of MAX led the software becomes unusually slow in the passage of the cameras. When I say exceptional, I mean that it takes up to 30 years to set up and run each camera. Bearing in mind that the vision process takes 0.5 seconds or less is unacceptable. It is just as painful changing between cameras in MAX.

  I noticed that on another system that uses a camera USB 3, simply by clicking on the camera icon in MAX takes a LOT of time answering to allow you to do anything.

  On the old windows PC with MAX 5 and IMAQ clicking a camera brings the dialog boxes fairly quickly.

  Someone has an idea, what happens? Is it something IMAQdx? Of course, this is not normal?

  Can anyone offer advice please?

  Thank you

  Your post, I shared with my colleague FireWire camera (which is out of town, but regularly check the email), and here's his reply:

  Three cameras at 25 frames per second, with RGB channel separated because of the bandwidth.  We take avi and pngs simultaneously on several channels.  My suspicion is that their former Council might not be fully compliant with the standards. Not all the work of commissions, I tried a little on-site, then chose the one that is recommended by the seller.  In addition, no hubs as they can also stifle bandwidth.

  Hope it will be useful.

  Bob Schor

• Min - Max and the planning of Kanban

  What are the factors or business cases that should be considered in the choice of planning that we should go?
  Any help would be appreciated
  
  My Client is interested in the above 2 methods
  
  Thank you
  Mahendra

  It of a broad question and is not easy to answer.
  One major difference is your philosophy.
  Kanban (if properly implemented) is pull based system.
  Min - max is always anxious that is it looks at your current onhand, future demand, future supply and then comes up with a purchase requisition.

  But there is no hard rule.

  Min - max works well when the issue of subinventory is not placed in a compartment. But in a workshop type of situation, you can have an operator goes the CRUDE inventory to get a bucket of screws.
  If you ran min - max on the WIP subinventory, he will think that you have a lot and does not generate a purchase requisition.
  But another operator may require that these screws and it may be out of them. In this case, a Kanban work better because as soon as the first operator took the last nth bucket, Kanban would have triggered the replenishment process.

  Kanban requires you to spend the time to analyze your problems to get to many of bin sizes and locations.

  The general rule is that Min - Max is simpler to implement.
  Kanban is a bit more complicated. So if your organization is not not mature enough or requires a simpler solution, min - max will work better.

  Sandeep Gandhi

• To upgrade the capacity of RAM for my laptop - model no: Compaq Preasrio C555TU

  Dear Madam / Sir,

  Hi, Joel:

  I can't find any info on the specs of your laptop on the HP support for her page.

  Then, download and run the free Crucial memory, analytical tool. This tool will report what memory you need (DDR, DDR2, etc.) and the amount of memory your PC can run.

  http://www.crucial.com/systemscanner/

  Paul

• I want to buy the usb 3.0 card and the wi - fi card for Pavilion Slimline s3760 form factor

  Please help me to locate the internal usb 3.0 card and the card WiFi for Pavilion slimline s3760. There been no wi - fi internal catd and usb 2.0 when I bought in 2009.  It is a small form factor of the cabinet, and so the cards normal donot enter. Also, will there be enough slots for the latter.

  Sorry for all the posts! Take a look at this one:

  http://www.Amazon.com/Koutech-SuperSpeed-adapter-low-profile-brackets/DP/B005FM8P3W/ref=sr_1_12?ie=UTF8&QID=1342556028&SR=8-12&keywords=low+profile+PCI+USB

  Here, it's to Koutech:

  http://www.koutech.com/prodDetail.asp?LineNumber=525

• 6199ee Pavilion - LX218EA: upgrade of ram hp pavilion dv6-6199ee

  can I switch from ram to my labtop hp pavilion dv6-6199ee from 8g to 16g?

  Hello

  The following link shows its specifications:

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/5082212/model/5116524/document/c02866517/

  It says clearly: expandable up to 8 GB of DDR3 memory (means 8GB max).

  But the maintenance and Service Guide says, it uses Intel processor (CPU) for this purpose, you can upgrade to 16 GB (page 5):

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/5082212/model/5116524/manuals

  Please use the right part on page 66 of the manuals or at least same specs above.

  Kind regards.

• HP Pavilion dv6-6c40us: change the processor of amd HP Pavilion dv6-6c40us PC notebook

  Hi, I need to know if I can change my laptop HP Pavilion dv6-6c40us Notebook PC processor roduct Specifications:

  Product name: dv6-6c40us

  US product number: A6Y50UA

  Microprocessor: 2.5GHz/1.6GHz VISION technology A8 from AMD with AMD Quad - Core A8 - 3520M acceleration processor

  The microprocessor Cache Memory: 4 MB L2 Cache

  Memory; 6 GB DDR3 SDRAM (2 DIMM)

  Memory Max: Maximum support 16GB =

  Chart: AMD Radeon HD 6620 G Discrete-Class graphics card

  Video memory: Up to 3061 MB total graphics memory

  64-bit, SO NOW, Windows Home 10 64-bit

  , either with one of the fastest, or replace it with an INTEL thanks

  Hello

  First Intel processor will not work with the motherboard of your computer now. Full stop.

  Second, starting on page 87 of the first manual on the following link:

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/5191856/model/5218535/manuals

  You win much upgrading AMD CPU speed and you do not have an option to upgrade at all.

  Kind regards.