Do something in the DAQmx way that does not fit? (Counter triggered on PXI-6608)

Similar Questions

• When I try to read Blu - Ray, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Original title: Blu - Ray

  My computer can read blu - ray, but when I try to play one, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "How should I do?

  Hello
   
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray Disc, you must use a non-Microsoft program that supports playback of Blu ray and a device that can play Blu ray discs.
   
  See the article mentioned below:
   
   
  Read a CD or a DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player
   
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Hi all

  I copied a video to holiday on a Virgin DVD + RW but when I try to play on the same laptop where it was copied from, I get the message "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "Any ideas please? I can normally play DVD pre-recorded ok.

  Thanks in advance.

  Hi all

  I copied a video to holiday on a Virgin DVD + RW but when I try to play on the same laptop where it was copied from, I get the message "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "Any ideas please? I can normally play DVD pre-recorded ok.

  Thanks in advance.

  =====================================
  DVD Maker might be worth a try:

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• NEED to recover files from the xp computer that does not start.

  I changed startup on an old xp computer programs and now it does not start (I can accidentally put driver not run at startup). blue screen; STOP: 0x0000007B (0xF8992528, 0xC0000034, 0x00000000, 0x00000000) xp sp3 no safe mode without recovery does Center no disc. I just bought a computer to try to recover the information with win 7 but can not slave the drive to him because it is ide and the new computer is too modern. I need to save files are important on the xp computer is it possible to save them?

  I met this BSOD error several times, and the following fix usually (not always) allows the hard disk to be read by the system...

  -Boot your system and access the BIOS Setup
  -It will vary with different systems, but try to press "F2", "F10" or "delete".
  -If you need help with this step, let me know the model of the system, and I'll see what I can come up with
  -In the configuration of the BIOS, looking something like "Device Boot Configuration"
  -Go to the hard disk configuration and change the current option
  -Here are the most common options that I can think of:
  -SATA IDE, AHCI, (newer systems have more options, such as IRRT)
  -If the current option is "SATA", change it to "AHCI" or "IDE".
  -If the current option is 'DCIS', change it to "IDE", etc...

  It's just a quick run through a possible fix, without knowing the details of your system!  If you need more detailed help, I would like to know the details of the system, and we'll see what we can do!

  -Riley

• The iPhone Mail uses the smtp server that does not exist

  My iphone SE mail constantly uses an smtp server that is not listed anywhere, but has been used there are 2 iphones.

  I deleted the account and smtp servers several times.

  There is only one main smtp server... not supplements

  I try to send an email whenever I get: user name and password smtp:mail06xxxxxxxx@authsmtp. Vodafone.nl is incorrect.

  vodafone is not my provider and I use the smtp server of vodafone.

  Anyone has an idea on how to address this problem?

  Have you tried to manually create the email account using the selection 'other '?

  What your email account provider?

• Create DVD Windows telling Me the edited VOB file does not fit

  Hello

  I have a problem which is confusing me and maybe someone can be able to explain my problem.  Let me start at the beginning.

  I had a bunch of VHS tapes of my family I have decided to have transferred to DVD. Now that they are on the DVD, I was hoping that I could use some software to divide and to amend parts I choose in each DVD and put them on a new blank DVD and use Windows DVD Maker to the menus.

  I had some success with a software called DVD Shr * k.

  This is the funniest.  Once I put the DVD with the original scenes of VHS on DVD Shr * k, they come out as "VOB" files on the computer, and Windows DVD Maker is allowing me to select the DVD with one of its menus.  On some (not all), when I edit some sections of this DVD and then put them in Windows DVD Maker, and then told me that they only will be fit not.  They are always saved as files "VOB" and obviously smaller in size than the original DVD (i.e. Windows DVD Maker accepts and to burn to a blank DVD with menus) but edited versions of smaller or scenes will not fit on DVD Maker, or so he says.

  Someone can tell me why this is happening and how to get around this situation so that after I edited the original DVD scenes, they will be adapted in creation of Windows DVD so that I can then use their excellent menus?

  Is there anything else I need to do to make this work?

  Thanks in advance.

  HB

  Thank you

  Well I tried with a VOB file, done your instructions and then according to your instructions after the completion of the procedure, I looked in program files / eRightSoft / Super /but could anywhere I see a folder named "Output" after that, and I couldn't find the converted file.

  Have you any idea why this is?  Or someone else has any ideas to my original question?

  Thank you

  HB

  ==========================================I
  If you know the name of the converted file, you could do
  a search of it... or maybe just do a search for. WMV.

  If you open Super and type... CTRL + O.. t is expected to open the
  "Browse for save" screen.

  The tree of files will be visible and maybe you can spot the
  location of the folder "Output".

  If you do not find the output folder you can uncheck
  all the boxes and choose a backup location. Highlight the
  top of the page and choose desktop... which should be easy to find.

  Once you have a folder selected... left click the ' Save
  Changes of button and go ahead with your video encoding
  deposit once more.

  If you are unhappy with great freeware Freemake
  Video converter may be a better choice.

  There are to many converters available on the net...
  Some are free, some details... the following freeware
  is but one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7 / 8)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your video files on the main screen.

  Or... Click left on the video button and navigate to the
  your video files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When video files are imported into Freemake,
  On the left, click the WMV icon at the bottom of the screen.

  The 'WMV output settings' screen opens.

  Choose a folder ' save in ', so you can find the
  converted files.

  On the left, click the "Convert" button and wait for the files
  to convert.

  That should do it...

• Request for the old data that does not correspond to new data within a given period

  Hi all
  
  The reports that I need to create one for all employees who were going from one Department to another within a given period. The way I ran this report in Reportsmith (taken from our old system) was to compare the dept field from the start date to the dept in the end date field and it gives me these associate who had moved. I had to do it this way b/c dept changes can occur using several different types of actions (change to Surv, promotion, etc.), none of them exclusive to only change dept. We now use Oracle HRMS and I need to create this report even with this system using SQL.
  
  Does anyone know how to compare the data between two different dates and shoot those who do not match? Your help will be GREATLY appreciated!
  
  Best regards,
  
  Yasmin E. Alberto
  HRIS analyst
  [email protected]

  Hello

  Here is an example of an INSERT statement that may be relevant to this issue:

  INSERT INTO emp_action (empno,   action_date,                           deptno)
                  VALUES     (7902,    TO_DATE ('2009-06-18, 'YYYY-MM-DD'),   10);
  

  If someone wants to help you, in doing anything more than guess, then that person probably will need create tables that are similar to yours (but much smaller).
  To do this, they can issue instructions CREATE TABLE to the tables, the INSERT commands to fill (put data in) the tables.
  The tables invloved in this problem are probably simple, so if I can see some INSERT statements, I can probably write instructions CREATE TABLE myself and save you the trouble.

  For more info on INSERT, see the [Manual of the SQL language | http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_9014.htm#sthref8944]

  If you compare the deptno to a row of a table to the previous line, you can use the analytic LAG, something like this:

  WITH     got_prev_deptno  AS
  (
       SELECT     empno
       ,     action_date
       ,     deptno
       ,     LAG (deptno) OVER ( PARTITION BY  empno
                                   ORDER BY         action_date
                        )   AS prev_deptno
       FROM     action_table
  )
  SELECT     *
  FROM     got_prev_deptno
  WHERE   deptno         != prev_deptno
  AND     action_date >= TO_DATE ('2009-01-0'1, 'YYYY-MM-DD')
  AND     action_date <  TO_DATE ('2009-03-01', 'YYYY-MM-DD')
  ;
  

  Like all functions, the OFFSET is described in the [Manual of the SQL language | http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/index.htm#I].

  Published by: Frank Kulash, June 18, 2009 11:53
  Originally missed a few quotes.

• access to the "My Documents" folder on the HARD disk that does not start

  Recently, I got 2 hard drives put in place into a monster of table (SATA) on me. I had an IDE hdd hooked that I had just never deleted. My "mirrored array' failed me so I ended up replacing my MB & CPU and started from scratch. The IDE hard disk has some very relevant info, I need to recover. I can get to basic files in there, but my most important stuff is in my folder 'My Documents' but as far as I can get is to open "Documents & settings". Another thing I try to open fails. I made a password but have no way to enter (at least AFAIK), I would appreciate greatly any help on this problem. Thank you

  Please see how appropriating a file or a folder in Windows XP .
  Boulder computer Maven
  Most Microsoft Valuable Professional

• Problem launching on windows 7 64bits pour agent of the United Nations that does not have administrator rights

  That is what we can do to pay an agent who has no administrative rights on windows 7 64 bit pour Adobe InDesign works because I have the following message?

  Adobe InDesign CS6 has stopped working...

  Thank you

  Contact your system administrator, who can allow you to have administrative privileges for indesign.

• Performance problem on the SQL query that does not use the primary key index

  Hello!
  
  I have some performance issues on a single SQL query (Oracle 10 g).
  I could solve the problem by using the INDEX indicator, but I would like to know WHY this is happening.
  
  * Tables *.
  create table jobs)
  ID number (5) not null,
  name varchar2 (100),
  primary key constraint Job_PK (id)
  )
  /
  -Record count: 298
  
  create table Comp)
  integer ID not null,
  name varchar2 (100),
  primary key constraint Comp_PK (id)
  )
  /
  -Record count: 193
  
  -Relation m: n
  create table JobComp)
  integer ID not null,
  id_job integer not null,
  id_comp integer not null,
  primary key constraint JobComp_PK (id),
  unique key constraint JobComp_UK (id_job, id_comp),
  Constraint JobComp_FK_Job foreign key (id_job) refers to Job (id),
  Constraint JobComp_FK_Comp foreign key (id_comp) makes reference Comp (id)
  )
  /
  create index JobComp_IX_Comp on JobComp (Cod_Comp)
  /
  create index JobComp_IX_Job on JobComp (Cod_Job)
  /
  -Record count: 6431
  
  * Ask *.
  
  When I run this query, the execution plan shows the index using (JobComp_PK and JobComp_IX_Comp).
  No problem.
  
  Select JobComp.*
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in 0.20 sec
  
  But when I add the field 'name' of the work table the plan uses full access table to the table of work
  
  Select JobComp.*, Job.name
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in the 2.70 dry
  
  With the help of the index
  
  Select / * + INDEX (Job Job_PK) * /.
  JobComp.*, Job.name
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in 0.20 sec
  
  * Doubt *.
  
  This behavior is correct?
  
  PS. : I tried to recalculate the statistics, but nothing changes:
  
  analyze the job calculation table statistics.
  /
  change the statistical calculation of index Job_PK reconstruction;
  /
  Start
  dbms_utility.analyze_schema (sys_context ('userenv', 'current_schema'), 'CALCULATE');
  end;
  /
  
  [of]
  Gustavo Ehrhardt

  Gus.EHR wrote:
  Hello.
  I'm sorry for the plan unformatted.
  The execution time of the querys "without field name' and 'with the field name with suspicion" are equal.
  He has no problem caching, because I get the plans of the sequence different from the querys and repeated the performance. The result is always the same.

  I don't think that there is no problem with oracle crossing LOOP IMBRIQUEE to the HASH JOIN when you include the field name and this should be the expected behavior. But it seems that your WORKING table has a degree of parallelism set against what is causing the query to run in parallel (as JOB table is now available with full table scan, instead of indexed access earlier). It could be that the parallel execution is contributor to extra Runtime.
  (a) do you know why the degree of parallelism on the WORK table has been defined? Do you need it?

  You can see if the following query provides a better response time?

  select /*+ NOPARALLEL(JOB) */ JobComp.*, Job.Name
    from JobComp
    join Job
      on Job.id = JobComp.id_job
   where JobComp.id_comp = 134
  

• Windows vista does not open and goes to the other user that does not exist

  I try to open to all modes goes directly to any other user who has never been assigned a password. Now Icant open workstation to all the .whassup

  Hello

  1. don't you make changes on the computer until the problem started?
  2. how many accounts do you have on the computer?
  3 have you tried to start the computer in Safe Mode?

  If you are unable to start the computer in safe mode, and then try to run a system restore from the System Recovery Options menu.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Problem with the latest patch, Mozilla does not fit on 1024 * 768

  Today (13/07/04) once the patch of Mozilla, the display of the Explorer to expand. I use 1024 * 768 on desktop. Now I have to scroll sideways to see the full page...
  Please solve this
  Thank you

  Yes, it wasn't a problem in earlier versions and the display size was independent of the settings of your system. However the arrival of high-resolution poster has necessitated that firefox now follows this convention, otherwise, it would be unreadably small on such systems...

  something you can try if you want to set the size/pixel density of the text in firefox is different from the settings in your system as it has been addressed in previous versions, enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named layout.css.devPixelsPerPx. Double-click it and change its value to 1.0 (or any zoom factor that fits your needs: 1.0 corresponds to 100%, 0.8 is equal to 80% and so on;-1.0 is the default and will comply with the configuration of the system).

• Data merge images shrink down proportionally to fit the image if it does not fit 100%

  I do a merger of large data of some labels and want the images to be narrowed proportionately to match the image if it is too large to fit 100%.

  What I've read, this is only possible with the data merge feature in InDesign. However, I think that it is possible using a script? In addition, there are three frameworks and I would like it to apply to one of the managers (once again, if this is possible).

  If this is feasible, how would I go on this subject? Is anyone able to write a script for me? Or have an existing one that I could use? I have had a look but couldn't find something similar.

  Thanks in advance!

  Adam

  Hello

  If you call pageItem by name - it returns 1st occurrence not all of them.

  You must browse the pageItems and check names.

  Like this:

  var
    mPI = app.activeDocument.allPageItems,
    cPI, cGB, cW, cH;
  
  while ( cPI = mPI.pop() ) {
    if (cPI.name == "3D") {
         cPI.fit(FitOptions.PROPORTIONALLY);
         continue;
         }
    if (cPI.name == "PROFILE") {
         cGB = cPI.graphics[0].geometricBounds;
         cW = cGB[3] - cGB[1];
         cH= cGB[2] - cGB[0];
         if (cW > 40 || cH > 43)
              cPI.fit(FitOptions.PROPORTIONALLY);
         }
    }
  

  If the CPI has no graphics ==> don't return error

  (you will then need to check if possible)

  Jarek

• Sites of bookmark in the file that does not appear in the window

  I need to put several websites in a folder, I named "Accessories". He is not one of the four files in the drop down window. So, I have to save it in one of the four and then open that folder and move the site to the "Accessories" folder

  Is it possible to change the four sites in the window (two of them that I haven't used in years)? Then go straight to this folder?

  The seal shows what is happening.

  What I want to do is to click "bookmark this page" and be able to put it directly in a folder.

  I want to change the four folders listed in the drop-down list.

  What I do is put a bookmark in the 'Western Short Story' folder, and then open up the bookmark in the "Accessories" folder that does not appear in the box.

  It's not a huge deal, but I'm working on about 20 sites today and I would like to save a few steps.