Total failure

Similar Questions

• Pavilion G6-1b39wm: need drivers (at least Ethernet) after disk HARD total failure and replacement

  I have a Pavilion ^ notebook PC series - it's a G6-1b39wm, the product number is lw363ua #aba.

  The hard drive was a total loss. I bought and installed a new hard drive and reinstalled Windows.

  However, I have no drivers - ethernet, WiFi etc... - and they are no longer available on the HP Web site.

  I feel as if I could at least get the driver installed ethernet, Windows could help me to find and install the other drivers.

  All I have for the ethernet is that it has integrated 10/100 Ethernet LAN.

  ANY help would be appreciated deeply deeply.

  Hello

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-notebook-PC-series/5082228/model/5118988

  RALink 802.11 b/g/n WiFi Adapter

  http://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57538.exe

  Realtek LAN driver (LAN)

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55040.exe

  Audio

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55036.exe

  Video

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54457.exe

  Touchpad

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52524.exe

  Card reader

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55038.exe

  HP Quick Launch software

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56929.exe

  HP utility screen

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52956.exe

  Concerning

• Total failure Audio when you use citrix Gotomeeting software

  The following message appears in the event viewer after I have begin to access a meeting using gotomeeting from citrix software. In order to return audio I have to reboot.

  Failing application AUDIODG. EXE, version 6.0.6002.18005, time stamp 0x49e02218, module failed unknown, version 0.0.0.0, time stamp 0 x 00000000 exception 0xc0000005, offset 0xffff0000, process id 0 x 504, code 0x01cab0f35733f883 application start time.

  Hello.

  • Were you able to use this software sucessfully without this error before?
  • What changes have been made on the computer before this problem?
  • You are able to hear the sound on your computer when this happens?

  Try disabling the enhanhcments on your computer and check if that helps.

  1. Open Audio devices and sound themes by clicking on the button start picture of the Start button, click Control Panel, hardware and sound, and then clicking sound.

  2. on the playback tab, click speakers, and then click Properties.

  3. click on the enhancements tab and then select Disable all improvements.

  If you do not see the enhancements tab in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated. If disabling audio enhancements does not resolve the problem, contact your computer manufacturer for assistance.

  For more information, see the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

  Also, you will need to uninstall and reinstall the software and check if that helps.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Let us know if this helps

  Concerning
  Anthony.

• How do I get Windows to reinstall after the total failure of the disk?

  I had to replace my hard drive, but how to get Windows Vista version licensed as was preinstalled on my broken drive?  Thank you

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Reading total failure first Pro CC 2015.4

  I'm on Premiere Pro 2015.4 CC, and tonight my reading the script completely ceased to operate. I am quite at a loss to know what to do.

  I'm on a Mac, OS X 10.10.5

  Processor 3.5 GHz 6-Core Intel Xeon E5

  16 GB 1866 MHz DDR3 ECC memory

  Graphics AMD over-pants D500 3072 MB

  Earlier this evening I just edit very well with the first 2015.3, audio for the most adjustments when after making a cut to a nested sequence (I did a lot of other cuts to without problem), reading has completely stopped working. Space bar did nothing. Nor did hit Play-Stop toggle

  I restarted my computer, but that has not fixed the problem. I then opened the other changes to the mine and reading doesn't work either in any of them (all projects have images that are either digital SLR canon h264 or c100 and c300 sequences).

  So I had to upgrade to 2015.4, but it does not solve the problem.

  After the upgrade, I could open the file several times, but then started getting the error message "this project contained a sequence that could not be opened. No preview of the sequence is preset file or codec may be associated with this sequence. "So I google, because I need reconnection to CC I did. It fixed the error message, but the reading still does not work.

  After the upgrade and the reconsignation in a single file, I tried opening gave my an error message about a codec missing Dolby that hits good would be to install (or something like that I did not take a screenshot of it). I hit very well, but do not know if the codec is installed.

  Right now, I can't get any reading in any scenario. If I double click on the images, I can't get the reading in the source monitor window (with hitting the space bar or the Play-Stop button). It goes the same for audio clips. I can rub my deadlines and see the images (but not the sound, even if I'm the first to rub audio).

  If I create a new project and import a footage item, only put them in a sequence, I can't put reading on it (or get the reading in the window of the source monitor). If I return the clip in the timeline I get always reading about it.

  If I try to return the timeline (for test I tried Apple RoRess 422 HQ and h264s) I get the error

  Export error

  Exporter returned wrong result

  Writing with the exporter: QuickTime

  Writing to the file: (I tried writing to three different hard disks, none works)

  Around the time code: 00:00:00:00

  Component: QuickTime exporter type

  Selector: 9

  Error code:-1

  Try to send back to Media Encoder doesn't seem to work but I don't get an error message, it shows everything just never in the queue

  I can't make a single audio clip or video clip, if I select in the project window and press command M and make just to get out.

  After trying the renders, now when I scrub the timeline, the image is not rubbing, it's stuck.

  Another thing which is the strange thing is, if I first open and go to file/open and select a file, it closes all project I open, but not open the new file until I have to reselect.

  And if I type the command Q to exit first, it closes the window, but first remains open. I have to enter a second time to exit.

  Someone has an idea of what I can do to fix this? It's a pretty big problem.

  Cub, I guess whatever it took, it was me post on the problem to fix. Looks like that first hated something cutting in the nested sequence that started this whole mess, and everything that went wrong in first reading this Cup would be wrong to open other files. Removing the Cup, save the file, creation of quit and then reopen it solved the problem.

• Upgrade Photoshop elements 13.1... total failure

  I installed upgrading 13.1, but I now have a complete inability of the editor to open. Has anyone else had a similar problem?  Does anyone know what I should do next?

  anne1calgary wrote:

  Thank you Michel - you mention "clean uninstall" and the removal of preferences.  Is it special I should do another that just uninstall the application? Of course, make a backup first...  Someone else said commercial drive running? who is?

  The recommended tool provided by Adobe is:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  The first paragraph confirms that it works also for the items/first Elements.

  Fortunately, I never needed to use it, but I've seen several cases where this has solved the problems of installation or resettlement.

  Using other utility like CCleaner (tool independent) can help in particular for registry problems, but they are not specific to Adobe facilities.

• Total failure of the download of applications of CC (white screen)

  After receiving an email confirmation of my order of Creative Cloud part Adobe, I followed the directions for the procedure of telechargeement of applications.

  On the Download Center page, I clicked on the button "Download" next to the chosen application... But then, nothing else has displayed an all white screen. I made a new test, repeating the procedure from the start, but this led me to a blank page.

  In short, I can't all download creative Cloud applications.

  Thanking you in advance pour your help.

  If your cc app has a white screen,

  1. exit the application (from the taskbar) and then restart.  If this does not work:

  2 remove the file OPM.db and reconnection in the desktop application of creative cloud using the Adobe ID associated with your subscription.

  Mac OS: You can locate the file OPM.db in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user library folder, see library user access hidden files. Mac OS 10.7 Lion.

  Windows: You can locate the file OPM.db in the \Users\\AppData\Local\Adobe\OOBE folder.  To show the hidden AppData folder, see view files, folders, file name extensions. Windows XP, Vista, Windows 7.

  If your browser displays a blank page, try using another browser.

• failure of restoration of 7201tx dv7 help im ready to hit it with a hammer and fix it forever

  My DV7 7201tx fails to restore it all goes the way to restart and loading of software etc. and even in windows 8, but only once and then it tells me that the restoration failed and locks the admin VAC and from there it just request the recovery media every time the computer starts, and it's like it goes , it will not go in the bios setings it will not choose a different boot device, it won't do anything except ask the media to restore which I give, but it does nothing. After the call to support the guy on the ph HP tells me that my restore media is defective. If I order and get the complete set of recovery DVD and try again with the same result. I forgot to mention to recover all over again, I have to remove the hard drive and put it in my Acer and then boot from a live cd of ubuntu and use Gparted to format the drive, so I can go through the whole process again... with the same results. I tried so many times now with the same result. Strange thing is I can load on my copy of win7 and it works fine, I can load on linux and it works fine, but try and load the media that come with the laptop and it's a total failure... This lappy is only 2 months old and im ready to cut my losses and smash with a hammer... This is my last resort to operate properly with the system, it came with... not that there will be a new vid on youtube to destroy me this laptop... Thank you and please someone HELP

  you are a man of legend... He worked freekin, the restoration went as it should have, and I have my computer back to factory settings... You saved my lappy to get a severe beating... awesome

• HADR drive boot failure

  After a power fluctuation my hard drive won't start
  I can boot from a floppy disk and Windows works fine on the hard drive after booting from a floppy how to repair the hard drive to start itself with windows XP second edition.marty at will

  If the hard drive boots to the floppy drive, then:

  (1) place the CD of installation of Windows XP (no recovery) in the "optical".

  (2) restart the PC

  (3) what "press any key to boot from the CD-ROM..." Press a key

  (4) reselect "Recovery."

  (5) at the command prompt: fixboot (?)    and fixmbe

  (6) restart

  NOTE: As for all disk boot problem hard, the difficulty can always cause a total failure of Windows and DATA loss.  Be careful.

• Total lack of audio, print and download programs files in IE8

  Have had since the total failure yesterday by IE8 in character streams, or download program files / of any web site. Print preview appears only as a simple blank page, while the other two functions attempts give me a similar error message: "IE cannot download xxxx xxxx.com. Asked to cite is either not available or is not found. Please try again. "Have you tried to correct the problems by manually resetting IE8 and other solutions without success. All solutions.

  Hey you pick up a 6-Pack,

  1. did you of recent changes on the computer?

  Method 1

  Check if the audio stream and download with internet explorer 8 remains in mode safe mode with networking.

  Note: Do not attempt this step if you are using the internet connection via modem or wireless on the computer.

  Steps to start in safe mode with networking

  (a) restart your computer if it is running.

  (b) press F8 after your computer powers initially on.

  (c) once you see the menu Advanced Boot Options, you can stop tapping.

  d keys) use the up/down arrow to select your selection.

  (e) select Mode safe mode with networking and press ENTER.

  (f) you should see loading drivers and wait please.

  (g) you should then be at the Welcome screen.

  (h) logon to your computer using an account with administrator privileges.

  Method 2

  Check Add-ons on Internet Explore to the origin of the problem. I suggest you try opening Internet Explore mode without modules.

  (a) click the Start button, click all programs, and click Accessories

  (b) click System Tools, click Internet Explorer (No Add-ons).

  How the modules of the browser affect my computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-browser-add-ons-affect-my-computer

  Method 3

  For the problem of printer overview see Microsoft article below and try them the steps mentioned and check if it works.

  You cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/973479

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• dv9620us monitor failure

  The monitor on my dv9620us has recently started having what appears to be a major collapse at irregular intervals.

  The computer will start upwards as usual, with the operating system and any open programs running quite normally.  The problem happens quite randomly: all of a sudden, the screen will become either completely empty, being replaced by random lines and colors in cascade and flicker very quickly across the screen, or a combination of both.  Occasionally, the monitor will be back to normal after some time has passed (again, no amount of time), although this return to a normal view has been detected less. However, I am still able to use the laptop with an external screen with no problems in listening (with the exception being attached to an external monitor) mode.

  My guess is that some hardware component failed, either the connection between the motherboard and the display or maybe a total failure of the video card itself.  On the latter assumption, I don't know if this would affect playback on the external display too.  I would be very grateful if anyone has an idea on how to fix and what I need to replace to fix the problem.

  To give more details about the computer, it's a dv9620us HP Pavilion age of 4 years old, running Windows 7 Professional 32 - bit, 2 GB of ram.

  Hello

  jstricklin wrote:

  This happens any angle at which the LCD is positioned, and move the screen seems to make no visible difference causing the display to fail or restore condition if it does not.

  A new LCD may be the way to go.  After reading the forum but, I wonder if it is a symptom of a video card failure.  A lot of threads to indicate in their discussions of the dv9000 series: http://h30434.www3.hp.com/t5/Display-and-video/DV9000-Laptops-with-Nvidia-card-motherboard-fail/m-p/90951/highlight/true#M4903

  As the machine is about 4 years old, it is out of warranty, and it would be probably more cost-effective to replace the machine instead of investing heavily in restoring it to full working order.  Is cost of course.

  Thanks for the reply!

  If you can view on an external display device when the LCD screen is blank or otherwise, this means that the video chip did not fail.

  Replacing the LCD screen will cost you $200-300, 00 unless you can find a used LCD on eBay.

  Best regards
  ERICO

• Firmware update failed, TC is now unavailable and no led light

  Found my TC this morning flashing yellow, found a FW update was available, clicked on update, downloaded FW but then he could not update and now TC is unavailable, I tried to reboot, but still no TC, before LED is off even on/after power on.

  How to treat?

  How to treat?

  Time Capsule 802.11n (4th Gen)

  The symptoms are typical of a Gen 4 TC... so thanks for putting this info in your profile.

  The new firmware is not the problem... However, the drop of water that makes the vase overflow. Your TC underwent a total failure due to bad soldering... the attempt of the update was this slight element of stress which caused the catastrophic failure.

  If you are a handyman, there is a fix... It of free... and set up to present enough to say that I am fairly confident with your symptoms, it will fix it.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

• Plug a new mac mini in 2009 imac 24?

  My iMac 24 "early 2009 is really starting to show it's age. Currently he is on OSX 10.11.6 which is the last one at this time.  Hardware upgrade only that I did it is to the top of the Ram of 4 GB to 8 GB.  He got a new HD due to a failure in his last month of AppleCare Plus (November 2012).  However, it's getting really slow but I have 4 external HD plugged into it and an external USB hub, as I am constantly plug additional devices attached. There is nothing wrong with the screen 24 ".

  In the last week or two, I went back to my mac, while he was in "sleep" mode and not able to reactivate.  After the first time this happened, I copied all the files, I was interested in one of my external HD in the event of a total failure.  I had a second time where I couldn't turn it back on and both times I clicked on the wired mouse, hit several keys on the keyboard and even tried pressing the power button.  Nothing has worked.  A few minutes later he came to life.  I'm confused as to what is happening.  Don't think that it is the internal HD only when the original was dying, he deploys all those rattling noises.

  So finally, my question: would I be able to replace this iMac with a mac mini using my screen 24 "beautiful?  Or better yet, run them both?  Might as well work simultaneously connected together somehow?  (I'm guessing the last question).  I'm just collecting information on the upgrade of my system before I die to a stranger may be soon time.  The difference in price of buying a mac mini compared to a new iMac 21 "or 27" is also a lot.

  Hoping I can get some good info to help me make those decisions.  Thanks in advance!

  Your iMac model is too old to support the target Display Mode. See the article Apple on it.

  You can replace your iMac with a Mac mini, but you will need a separate standalone screen. You cannot use the 24 "iMac as a display of your Mac mini.

• Toshiba Satellite P70 - response about the service of warranyt

  Hello
  I have a Toshiba Satellite P70. Unfortunately, it was a failure. I reported the accident on the Toshiba site two weeks ago. To date I have not received response. How long I'm going to wait for a response and repair?

  My patience is running out... Failures reported on 16/01/2016. G1G1MW0021 repair cases. The laptop is still broken in my house. Customer service is a total failure. How long I have to wait? Month and year?

• 7.24 Skype crashes on CTRL + A

  This morning I noticed my 7.24 Skype crashing when I hit the key combination CTRL + A (select all) in the chat. Reinstalled. No effect.

  Skype has Parisians work.

  External exception 505.

  I must say I'm impressed. This happens on Windows 10 and Skype is supposed to be a Microsoft product. Even a simple combination of keys windows translates into a total failure.

  Solve the problem.

  It seems that the solution was to reboot Windows 10. Question no longer appears.