Do the following to move a database from computer A to computer b.

Similar Questions

• Is - is this legitimate? I get the following requires Windows Genuine Advantage from Microsoft Corporation: Validation status: Action required

  Is - is this legitimate?  I get the following requires Windows Genuine Advantage from Microsoft Corporation: Validation status: Action required
  The validation process cannot continue because your web browser is not configured to run the components required by the genuine validation process. The following will help you solve this problem and continue with validation.

  The information bar is shown below.

  1 1 clic click right on the information bar and select install the ActiveX (see below) control

  2. when the Internet Explorer security warning dialog appears, click on install.

  If the ActiveX control does not properly install, you can click on the button OK below to start the posting process replacement (optimized for browsers unable to perform the initial validation script).
  Is - is this legitimate?  I get the following message claiming to be Windows Genuine Advantage from Microsoft Corporation:
  Validate now state of Validation:

  It is valid only if the message comes from Microsoft.com

  Go to this Web site in Internet Explorer: http://www.microsoft.com/genuine/validate/

• Windows Movie Maker - try to change your published movie, import songs from computer used in the previous film.

  to import the music that is on the computer used in an old file to windows movie maker, all other music on computer can be imported except the songs used before, uncertain, why is this? I also wanted to see if I can edit the published video so that I can make a template by making a second copy of it to edit photos?

  You should be able to re - upload the music you previously
  used in Movie Maker from the original location.

  If you still see the music in the film Collection pane
  Manufacturer and can not use the view is a good chance that it
  has been moved or deleted from the original location.

  If there is a X... Red try, right click and see if you
  can navigate to the current location of the music file
  and restore the path.

  Movie Maker does not archive copies of your source files...
  It simply records the path to the original location.

  If the published video is a. The video file WMV... it's not
  more editable in Movie Maker. But you can import
  and use it in the same way as you would for any other video file.

  If you still have the. MSWMM Movie Maker project file...
  It would be re-editable if all source files are always
  available.

  If you don't have the. The WMV video file, and you want to
  change photos... you will need to create a new project.

• Print the following spooler & RPC:When instructions from Microsoft to correct the 0x000006ba error I then get error 1068. Have spent hours trying to solve this problem and support web Microsofts is not useful at all - please help - I just want to be able

  Print spooler 0x000006ba and 1068 error messages

  Try the instructions and links provided by the spirit in the following thread shows to see if they help (or differ from what you have already tried):http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/ef6ac932-a6cb-48cb-a56b-de5b1443df87.

  If this does not work, what is the manufacturer, the brand and the model of printer that you have (and all that you had previously installed)?  What version of Vista you have (for example, 32-bit Vista Business SP2)?  How the printer is connected (1 LPT, USB, ethernet, wireless, network,...)?  Please report the exact error messages you've been making word - that they can help us find the cause because there are reasons a bit that these things could happen and we have to understand the situation better than to offer a more targeted solution.  For example, what is a Lexmark printer (or have you ever had a Lexmark printer)?  There is a particular problem with these printers and a fix for the problem but I don't know if this is the case here and do not want to waste your time on something that does not apply.  There are other examples, as well.  We understand the situation, the better we can help you.

  I hope this helps.  If this isn't the case, please provide a lot of information that you can including the answers to all the above questions and anything else that you think might help.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I need to disable the Office to move to a new computer

  Can I disable Microsoft Office 2007 on a computer and so I can move it to my other computer that I use most often to remove it?  Help, please

  Quote:

  http://www.technologyquestions.com/technology/Microsoft-Office/41199-how-many-times-can-i-install-MS-Office-Student-2007-a.html

  MS Office Home and Student edition (Excel, Word, Powerpoint, OneNote) allows 3 installations for a single household.

  Other editions of detail, such as MS Office 2007 (Word, Excel, Powerpoint and Outlook) Standard edition allows 2 installations for one person.
  http://Office.Microsoft.com/suites

  If you have an activation problem after the removal of a product from the retail of MS Office to another computer, you can use the Activate by phone
  method).

  Bob Buckland?  :-)
  Products of MS Office System MVP

  If Office is OEM license, it cannot be moved.
  To move the desktop, install it on the new computer, uninstall old.

  Activation problems, contact Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a computer "emachines" and want to have installed the software "Microsoft Movie Maker. is my computer compatible?

  I have a computer "emachines" and want to have installed the software "Microsoft Movie Maker.  is my computer compatible?

  Movie Maker is compatible with Windows Vista.

  Microsoft Windows Live Movie Maker

  With Windows Live Movie Maker, you can quickly turn your photos and videos into polished movies. Add special effects, transitions, sound and subtitles to help tell your story.

  Download Movie Maker:

  http://explore.live.com/Windows-Live-Movie-Maker

• What are all the steps necessary to download pictures from computer to ebay?

  What are all the steps required to publish photos from the computer to ebay?

  This is the Adobe Creative Cloud forum.  For eBay questions, try eBay help.

  http://pages.eBay.com/help/sell/pictures.html

  Nancy O.

• is it possible to download music movies games etc from computer windows xp to an apple as i pad?

  was going to download the music that is on my computer for an apple ipad. is this possible?

  You will need to follow the steps described in the Manual: http://support.apple.com/kb/ht1296

  If you need assistance with this process, contact the Apple support.

• A database from the information

  Hi I have the following concerning musical works database:
  
  Set echo on
  
  Drop table Musical_works cascade constraints;
  Drop table Composer_det cascade constraints;
  Drop table soloist_det cascade constraints;
  
  Create table Musical_works)
  Serial_no number (10) constraint pkmwork Primary key,.
  Title Varchar2 (50).
  Composer Varchar2 (20) constraint Comp_uniq unique.
  Forced soloist Varchar2 (20) single solo_uniq.
  Date of registration,
  Short_desc Varchar2 (100),
  Long_desc clob,
  Playing_time number (3,2).
  Full_recording blob,
  Sample_clip blob
  );
  
  Create table Composer_det)
  Composer Varchar2 (20) constraint pkcomposer Primary key,.
  Date of born,
  Death in date,
  Biography clob,
  Sample_clip Blob,
  Foreign key REFERENCES Musical_works (composer) (composer)
  );
  
  Create table Soloist_det)
  Soloist Varchar2 (20) constraint pksoloist Primary key,.
  Date of born,
  Death in date,
  Biography clob,
  Sample_clip Blob,
  Foreign key REFERENCES Musical_works (soloist) (soloist)
  );
  
  I used the following procedures to add information to the database:
  
  Set serveroutput on
  
  Create or replace procedure add_works (in numbers, in work_title Serno varchar2,)
  comp in varchar2, solo in varchar2, rec to date, shortdesc in varchar2, longdesc in clob.
  length in number, fullrec in sampclip in blob, blob)
  AS
  Begin
  DBMS_OUTPUT. Put_line ('Insert attempted");
  Insert into Musical_works (Serial_no, title, composer, soloist, recorded, Short_desc, Long_desc, Playing_time, Full_recording, Sample_clip)
  values (Serno, work_title, comp, solo, rec, shortdesc, longdesc, playtime, fullrec, sampclip);
  DBMS_OUTPUT. Put_line ('Insert successful");
  Exception
  While other then DBMS_OUTPUT. PUT_LINE ('ERROR');
  DBMS_OUTPUT. Put_line ('procedure failed");
  End;
  /
  
  Create or replace procedure add_composer (model in varchar2, cbirth in date, death date,
  cbiography in clob)
  AS
  Begin
  DBMS_OUTPUT. Put_line ('Insert attempted");
  Insert into Composer_det (composer, born, death, biography)
  values (model, cbirth, dead, cbiography);
  DBMS_OUTPUT. Put_line ('Insert successful");
  Exception
  While other then DBMS_OUTPUT. PUT_LINE ('ERROR');
  DBMS_OUTPUT. Put_line ('procedure failed");
  End;
  /
  
  Create or replace procedure add_soloist (solo in varchar2, sbirth date, sdeath date,
  sbiography in clob)
  AS
  Begin
  DBMS_OUTPUT. Put_line ('Insert attempted");
  Insert into Soloist_det (soloist, born, death, biography)
  values (solo, sbirth, sdeath, sbiography);
  DBMS_OUTPUT. Put_line ('Insert successful");
  Exception
  While other then DBMS_OUTPUT. PUT_LINE ('ERROR');
  DBMS_OUTPUT. Put_line ('procedure failed");
  End;
  /
  
  
  From there I need deriveinformation on:
  
  (1) ages of composers at this time back died if the person is no longer alive
  
  (2) classification of shortest piece (< 5 minutes), medium (between 5 and 45 minutes) and long (> 45 minutes)
  
  I'm using SQL * more
  
  I'd appreciate any help

  Hello

  It will be easier if you can post some examples of data but check this query see if it works for you.

  SELECT mw.composer,
         ROUND ( (SYSDATE - born) / 365, 2) AS age,
         DECODE (died, NULL, 'ALIVE AND KICKING', 'DECEASED') AS isalive,
         title,
         (CASE
             WHEN playing_time < 5 THEN 'short'
             WHEN playing_time BETWEEN 5 AND 45 THEN 'medium'
             WHEN playing_time > 45 THEN 'long'
          END)
            playing_desc
  FROM musical_works mw, composer_det cd
  WHERE mw.composer = cd.composer
  

  Concerning

• Moving database from 1 server to another via Data Pump - some queries

  Hello
  
  I am planing to move my database from one windows server to another. Part of the obligation is also to update this database 10g to 11.2.0.3. So I'm combining 2 tasks using the export / import method (via Data Pump) upgrade.
  
  Regarding export / import (which will be a pump full data of the database export) my plan is.
  
  create an empty 11.2.0.3 target database on the server (same number of control files, and redo logs etc.) ready for an import of the source database
  Q1. This will create tablespaces SYSTEM and UNDO - I presume the datapump export doesn't include these spaces of storage anyway?
  
  For export, I intend to simulate CONSISTENT = Y using FLASHBACK_TIME = SYSTIMESTAMP
  Q2. What is the return of flame characteristics must be active on the source database to use this knowledge should I Flashback Database enabled on the source (as opposed to other flashback features) database?
  
  My target is a virtual server with a single virtual processor
  Q3. Is there any point PARALLEL usinng in the import settings file (normally I would fix this number of processors - however in the case of this virtual server, it is actually onely a virtual processor)?
  
  For the import, I intend to use the REMAP_DATAFILE option to change the location of the data files on the target server
  
  Q4. If the import fails before the end, what is the best course of action? for example I just let go of data storage spaces and remake a complete import?
  
  Thank you
  Jim

  Jim,

  I'll take a pass on your questions:

  create an empty 11.2.0.3 target database on the server (same number of control files, and redo logs etc.) ready for an import > source database
  Q1. This will create tablespaces SYSTEM and UNDO - I presume the datapump export does not include these storage spaces > anyway?

  The system tablespace is created when you create a database, but the Data Pump will export and try to import. It will fail with tablespace exists. I am sure that the undo tablespace will be also exported and imported. If they are there, then just import will report that they already exist.

  For export, I intend to simulate CONSISTENT = Y using FLASHBACK_TIME = SYSTIMESTAMP
  Q2. What is the return of flame characteristics must be active on the source database to use this knowledge should I Flashback Database active > on the source (as opposed to other flashback features) database?

  I know not true about it. I thought that you need just enough cancel, but I hope that others will run in.

  My target is a virtual server with a single virtual processor
  Q3. Y at - it no PARALLEL point usinng in the import settings file (normally I put this on the number of processors - > however in the case of this virtual server, it is actually onely a virtual processor)?

  We recommend usually 2 times the number of processes, so 2 parallel should be ok.

  For the import, I intend to use the REMAP_DATAFILE option to change the location of the data files on the target server

  Q4. If the import fails before the end, what is the best course of action? that is, do I just give up storage of data and redo a > full import?

  It depends what is failure. Most of the failures will not stop work, but if this is the case, then most of these jobs may simply be restarted. To restart a job, you just need to know the name of the task, which is printed as you start to export/import, or you name the task in your order Data Pump. To restart, follow these steps:

  password/user Impdp attach = job_name

  If you do not name the work, the name of the job will be something like

  User.sys_import_full_01

  Hope that helps - and good luck with your migration.

  Dean

• Where is the result of the following query caching?

  I run the following query statement:

  select * from hr.employees

  Where is the result of the following query caching? Is cached in the PGA? What area of PGA?

  By definition is not "cache". The blocks of data that are read to retrieve the results of the query are retrieved in the cache (DB_CACHE_SIZE or DB_BLOCK_BUFFERS component BMG) buffers so that they are accessible on several occasions by the same users or other users. However, because the buffer cache is limited in size, buffers are released when new blocks to be read. Buffers for a full table scan (as it would be for such a request) are released very probably earlier.

  Please read the Oracle database documentation, starting with the Concepts manual for the version you are using. Starting at http://tahiti.oracle.com

  Hemant K Collette

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Please need help, my computer does not start. I get the following message:

  Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · You have the windows XP Setup disk?

  · What is the exact error message that you receive when the computer starts in return?

  You can follow the procedure from the following link: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

• How to list the cars on unix terminal databases

  Hi guys, I want to know how to list all the cars on unix terminal databases.
  the following command lists all databases running on a server
  
  *'ps - ef | grep smon | AWK '{print $8} ' | f '_' awk ' {print $3} "*.
  
  These databases, I try to find all the databases that are active rac.
  
  I tried srvctl status database-d 'database name'
  but with that I was able to find information on the single database at a time. So I'm looking for a single command that lists all the cars to a one-way ticket databases.
  can someone help me please understand this command
  
  Thank you

  Try:

  srvctl config database
  

• I'm trying to import video in Movie Maker and get the following message: M2U00017. MPG could not be imported. An interface has too many methods to fire events from. What do this mean and what should I do to allow me to import video files to edit?

  When you try to import video files in Movie Maker I get the message; M2U00017. MPG could not be imported. An interface has too many methods to fire events from

  -What this means and how do I fix it so I can import video files to edit?

  When you try to import video files in Movie Maker I get the message; M2U00017. MPG could not be imported. An interface has too many methods to fire events from

  -What this means and how do I fix it so I can import video files to edit?

  =======================================
  Movie Maker has problems with the .mpg files... best bet would be
  to convert the .mpg files before importing the .wmv format.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, .wmv

  See the following article:

  Movie Maker 2 - Import MPEG files
  http://www.Papajohn.org/mm2-importing-video-MPEG2.html

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your video clips on the main screen...

  Select "At?" / OK...
  (the? is the format of your choice)

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  John Inzer - MS - MVP - digital media experience