Do we need an ODI agent is running using the command startscen

Similar Questions

• Need help to fix a computer using the command prompt

  So, my computer has suddenly crossed an escalation of alarming events, culminating with a very desperate, me trying to get information on the "Command Prompt". I don't know why, how, and it's all heart-wrenching. If someone has an idea of what could be done to fix it, I'd certainly eternally grateful to them. I will try to be as detailed as possible, so I don't miss information that might be useful for someone who know how to use.

  I have an Acer Aspire V5 - 573G, running under Windows 8 64-bit with a 12G RAM, about 1 year and a half old, and this is the story of his unexpected collapse.

  3 days ago the computer suddenly began to show extreme problems with the help of any program. I had let him sleep for a few hours, and when I came back all started running very slowly.
  At the beginning I'm not too worried about I have mostly ran programs dependent on Internet and thought it was a simple connection problem. I have conducted a malware check (which I use quite regularly anyway) and downloaded Avast to see if he could detect all viruses, but everything was fine.

  However, after that them stopping and turning back on the morning, things only seem to be deteriorating. I was not using my computer much at all, but after the second day of the fight with all that I realized that in Task Manager, something was really wide, and the drive was 100% use even when nothing was running.
  Usually, after a few minutes it would go back down to 1-2%, but as soon as I ran whatever it is, even simply open Control Panel, happen very quickly to 100 times (sometimes the Task Manager was sufficient to make this happen).

  I removed Avast and tried to delete the process when I made sure it was safe to do so, but it did not work. I tried after tutorials on the Internet for people who reported similar problems, which led me on a desperate journey funny through Windows Defender removal, an (unnecessary) extreme increase virtual memory (which I brought to the standard after that report maybe just made even slower computer), something to change the parameters of High-Performance mode so that the Hard Drive would never turn off has tried to stop the search and indexing in my session, make a small altar to Turing... nothing worked.

  I ran a chkdsk /f C: who found problems with indexing files / indexed and likely fixed, because when I ran simple verification once the computer has been again this topic found no problem. However, the situation was the same: essentially constant use of the disk of 100% and no way out.
  A sad moment, after hours of attempts, I stopped by mistake the wrong process, explorer.exe. I restarted the computer, and then the problem was still there, at least explorer.exeseemed fine.

  However, when a few minutes later, I rebooted the computer, even once, I couldn't access the desktop more and I found myself in a loop of reboot attempt that has nothing, attempted to retrieve an earlier version of the system but nothing happened.

  The only thing I can do is access chkdsk to see what the problem is, but I'm not sure that I could see a way out of this, even if there was a. The only thing that seems clear is that there is a lot of damaged clusters, that he can't solve.
  This morning I ran 2 other chkdsk /f c:, the results by saying that there was no problem and no further action was required.
  So I ran a C: /R, and once again he told me that there are some clusters damaged in this file.

  Is there something I can do? Someone has an idea of what could have happened?
  My idea was to wait for it to perform this check, run a chkdsk /f /r c: and see how it goes if I restart it, but I could really use advice from more experienced and skilled people.

  The computer has not received any physical damage, not even in the relatively distant past of her young life. Before he started having all these problems he did nothing particularly requiring either, just running a few innocent Assassins Creed II (with 11.9 available RAM for what I remember stats and a Nvidia GeForce GT 750 M, I think not that it should have been a source of so much distress). This is the first time it gives me problems.

  Also, I apologize if any information was unclear or confused, but not only am I a tragedy with computers, I also use a computer in a different language and a few technical terms could have been translated a little too big. If someone needs more information, I can do my best to give it.

  Hello

  Windows Defender is the default Antivirus which comes with Windows 8 and should not have been "removed."

  @@@@@@@@@@@@@@@@@@@@@@@@

  Reinstall your operating system:

  Here are the instructions Acer for recovery to factory settings, new condition.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  See you soon.

• Not able running Maxl, if ODI Agent is running under & managed by OPMN

  Error thrown when in the execution of Oracle Essbase Interface Inteface using IKM SQL for Hyperion Essbase (DATA) and by calling a MAXL clear script in PRE_LOAD_MAXL_SCRIPT.

  Execution of the Interface is done correctly if the same agent ODI runs directly from the command prompt (using agent.bat). But when we start the agent the instance of OPMN, the following error:

  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: cannot run the program "essmsh": CreateProcess = 2 error, the system cannot find the file specified

  The agent of ODI running fine and complete any execution of the interface without MAXL. But if we use PRE_LOAD_MAXL_SCRIPT, it generates an error.

  We have already created two environment variables such as ESSBASEPATH and ARBORPATH, also set to day the Path variable. We are able to start maxl using the command "essmsh" directly from the command prompt.

  I would like to know how can we call MAXL scripts through successful ODI agents OPMN.

  All the suggestions/help will be appreciated.

  Thank you!!

  Hi Ashish,

  Some time ago I saw it, so I forgot a few other env variables that must report in opmn.xml. It also needed a little more env vars the overall environment for OPMN is very limited. You can try the steps Note 1556801.1 as well. If all goes well, that should do the trick.

  Concerning

  Craig

• How to use the commands on the cmd prompt witout using a string like 'netstat' but I need output

  How use the commands on the cmd prompt witout using a string like netstat but I need output
  example: C:\ > netstat-an... will give its results
  But if the keyword netstat is blocked...
  I want to use the command netstat another way... can I convert it to binary, and then I can run or something else
  Please answer my questin

  Netstat is simply a file program located in the folder C:\Windows\System32.   It appears as "netstat.exe.  If you rename (or copy / paste / rename) to "abc.exe" then you can run it using 'abc' instead of 'netstat '.

  HTH,
  JW

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• Error message: the software can be installed by using the command "run under...". ».

  I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

  Try right click on the setup.exe > run as admin.

  If this does not work, try the Vista Hardware and drivers Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• User names found using the command run "control userpasswords2" do not match my user accounts

  Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
  When I look in Control Panel I see 4 users, A, C, D and comments.
  When I go to C\:Users I see B, C, D and comments.
  I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
  All of these accounts should not match in computer #4?

  On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.

  I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.

  Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this?   Gift of TIA

  Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
  When I look in Control Panel I see 4 users, A, C, D and comments.
  When I go to C\:Users I see B, C, D and comments.
  I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
  All of these accounts should not match in computer #4?

  On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.

  I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.

  Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this?   Gift of TIA

  I finally thought to it. They wore all the user names that came when I ran the command "control userpasswords2". As I said in my original post, user names in all the names of the Panel user control over all matching computers. The only conflict I've had was in the list of user names in the list found when I ran "control userpasswords2". I went to highlight the 'B' account after that I ran the command, you click Properties and changed his name to 'A'. This solved my access denied problem once and for all. Apparently he does not have all of the accounts in the control panel.

  Don

• A virtual machine running from the command line

  Hello

  I installed, with an XP VPC to VMWare player.

  I would firstly the VPC via a command line instruction, but Im getting an error message when I do (so I hope someone can help me with it).

  I use the command: -.

  "" C:\Program VMware Player\vmplayer.exe D:\My virtual Machines\Windows XP Professional x"

  Windows Player Thew opens, but I get the message following up: -.

  Error when opening the virtual machine, error opening 'D:\My Virtual Machines\Windows XP' Professional: access is denied.

  The VPC opens perfectly if you start from a few players GUI.

  Please can someone indicate what mistake I make?

  Thank you very much

  Have you tried or are you, run cmd as administrator prompt?

  Also, try pointing to the file like this .vmx extension:

  "" C:\Program VMware x D:\My Player\vmplayer.exe virtual Machines\Windows XP Professional\Windows XP Professional.vmx ".

• How to use the command line in w/Merge Vista?-need to cut password expires...

  I use Vista Home Basic by Fusion on a Mac Intel. The instructions to stop Vista expire a password is to use the command-line under Vista. I already know these instructions, so my question is:

  How to use the command line inside Vista, on a virtual machine?

  Thanks for your help in advance, I don't want to mess something else.

  Jacob.

  With assistance from the command-line on Vista is no different if it is to be run on a virtual machine or on a physical machine, so just like you would on any physical machine.

• ODI agent cannot connect to the ODI Studio

  We install ODI via subsequently EPM using FDMEE.  We have installed using the version 11.1.2.3

  We can connect via Studio ODI and surf around.  We started seeing a problem where we can't get into some places.  Especially if we try to select Show agent planning, we get a message unable to connect.

  , We looked at the log file and find the following line.  ODI-1424 host Agent or the port can be reached using http:// xxxxxxxxx

  What we have noticed is that the URL it uses is the original no SSL url.  So, my question is where this configuration change?  Since then, we have installed an ODI via EMP/FDMEE I don't know where to look for the configuration.

  We tested the same on our environment no SSL is enabled and it works without any problem.

  Any help would be greatly appreciated.

  A patch that you run of FDMEE, the reason why I ask if dans.520 default because what follows is fixed

  18547248

  FDMEE connects to the port ODI Agent evil in a SSL configuration is enabled.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Magic canvas HP needs 16:9 resolution to run on the new hp desktop computer

  Magic canvas HP does not work on my new HP desk top continues to saying he needs 16:9 resolution to run and closes

  I would contact HP support on this issue, especially since it's a new PC.

• Finder constantly need stimulus, freezes (Macbook pro running with the Mavericks)

  I have a macbook pro running on 10.9.5 Mavericks. I got it for a few years? Pretty smooth sailing, touch wood, except for a few days every time I try to use the finder it freezes and the screen gets corrupted look (so; it's like a picture of me trying to access my applications folder).

  

  If I use force quit to make finder restart, it will work for the first couple items, I try to find, and then do it again. I tried to delete the plist finder and reboot, but no dice. Is there something I can do?

  Wow, never heard of that before. Beautiful new computer, too.

  Try to connect as a guest (or any other user account) and see if the same thing happens.

  • If you do not have an active guest account (you would see on your login screen), open system preferences and go to users and groups.
  • Click on the padlock at the bottom on the left and enter your admin password.
  • Under the section other users to the left of the window, click Guest user.
  • Check "Allow guests to connect to this computer."
  • For ease of use, click Connection Options at the bottom and check "see the fast user switching menu under...". "The option is not serious.

  Click on your username at the top, next to the Spotlight search, and select guest user. Find out if the Finder is doing the same thing... then you can log on to the guest user account and return to your current account.

• Why do I get "Message Agent wants to use the"login"keychain and how to stop it and 7 other bunch of connection."

  Why do I get "Message Agent wants to use Keychain 'login' and how to stop it and 7 other bunch of connection points most every time I login?

  Hey Roman man,

  I understand that you see a prompt for your login keychain. I can't anymore how do I fix this.

  Now if you have recently changed your password for your Mac, then the password for your keychain will need to be updated. You can make this change in the Keychain Access application. If you do not know the password, then you need to reset the password in the keychain. Take a look at the article below for specific details get this sorted out.

  If your Mac keeps asking for the password in the keychain
  https://support.Apple.com/en-us/HT201609

  Take it easy

• mxmlc - fails immediately when run at the command prompt

  Yes, I'm under flex 2 with java 1.6.
  I am able to write and run applications using the Flex Builder 2 IDE without problem.
  Wanted to compile the style sheet to use when running.
  He worked through the setting without problem.
  
  When I run mxmlc from the command prompt, Windows prompts with 'JAR Launcher has encountered a problem and needs to close. We are sorry for the inconvenience. »
  
  I launched the debugger VS, where I was able to get the violation, an unhandled 0x5c62696c in mxmlc.exe exception: 0xC0000005: reading location 0x5c62696c access violation.
  
  No idea or help is appreciated.

  My user error. Just removed all the following settings. It was a config problem.

• A limit to the reentrant instances run using the VI server and asynchronous call?

  I have an application that attempts to launch many incoming preallouees clones using the server of VI with asynchronous call to start. I find that it seems to be an upper limit on the amount of clones that can be run by using this method. 26 Nations seem to run and then in addition more clones are laid but they seem to be just sitting here do not run. I confirmed this behavior by all launch on the performance front panels.

  Is there something I'm missing here?

  You use option 0 x 40 incorrectly.   That allows you to create a pool of clones and aims to created that only once (I ran up to 10000 clones with a reference using 0x40).  If you want a clone by reference, then just use 0x80.