Doc / leaves / snow to freeze when I load my custom application

Similar Questions

• Satellite Pro U400 freezes when toshiba load screen appears

  Please can someone help me!

  When I turn on my U400 it gets to the loading screen toshiba, but then everything freezes and used further.
  I tried f2, f8 and f12 but also simply freeze and goes no further.

  The hard drive light flashes at the start but then stop!
  The battery and the power cable are fine and so is the cd drive such that all continue to work.

  Can a little help if you please?
  I'm a beginner and this is my first laptop!

  Please PLEASE help me.

  Hello

  It seems that the laptop can not pass the Toshiba start screen properly
  What does that mean?
  Well, it means that an error has been detected during POST (power on self test).
  It could be everything. Memory faulty RAM, motherboard part etc.
  It is difficult to provide an accurate answer to this question, it would be necessary to check these parts first.

  Since you are a beginner, I recommend you contact a Toshiba (certified partner) ASP in your country guys may run diagnostic tests to discover the problem.

• BlackBerry Smartphones SMS and MMS icon when I load my custom theme

  I built a custom theme using the Plazmic 4.1.0.19 theme generator. When I insert the new theme, the SMS and MMS icon is gone. My theme is set to display the first 10 icons that you see when you press the MENU key. For some reason the SMS and MMS icon is not there anymore. All other icons are there. When I switch to my old theme, he's there. No one knows what causes this problem.

  I ran a test by creating the topic without using the order of application device and put the SMS and MMS icon on the home screen. When I insert this theme to test, the SMS and MMS icon area is just a dark background on the home screen.

  I made a minor change in the theme and reloaded on the "BOLD". This seems to fix.

• DataSource NameNotFoundException when you use a custom application of ADF in spaces

  Hi all

  I use Webcenter spaces 11.1.1.6.0

  I have a request of the ADF that has a bounded with jsff taskflow.

  I created a pot of view controller and added the same in another generic application and has deployed on the spaces as a shared library.

  I made an entry of this shared library in weblogic.xml of the proposed extension of the spaces.

  Now I see the taskflow and ui is coming. But I'm getting exceptions such as:

  javax.naming.NameNotFoundException: DataSourceContext could not locate a source of data for the name

  
  

  Now in bc4j.xfg I changed the name of java data source: comp/env/jdbc/testDS in jdbc/testDS. This issue is resolved and the page works fine.

  But in this page, we have an image from a servlet. I always get the same NameNotFoundException for this servlet.

  The servlet code:

  --------------------

  Context ctx = new world;

  DataSource ds = (DataSource)ctx.lookup("java:comp/env/jdbc/testDS");

  I also tried with DataSource ds = (DataSource) ctx.lookup("jdbc/testDS");

  But still the same issue.

  Please suggest if I'm missing something.

  Do I need to have a (< res-ref-name >) entry in weblogic.xml or web.xml somewhere for datasource? In the generic project in ADF application or Shared Library Project or extension?

  Kind regards

  Deepak

  I think I must register my servlet in the project of extension as well.

• My computer crashes sometimes when windows loads up.

  My computer sometimes freezes when it loads Windows. He can do it two or three times before it works. After that windows does not load it gives a message saying "a problem has been detected and windows has shut down to prevent damage to your computer. According to the report of error: Stop: 0x0000000A (0x0000001c, 0 x 00000000, 0 00000016, 0x804E1757). Event Viewer records the Source as 'Serious mistake', category 102 event 1003.

  I am running XP, VERSION 2002, SP2.

  http://support.Microsoft.com/kb/314063 MS - MVP - Elephant Boy computers - don't panic!

• When I load Illustrator CC 2015 the page says Initialising... and then the program freezes and will not open. I can only successfully open Illustrator once in each tent 4 or 5.

  When I load Illustrator CC 2015 the page says Initialising... and then the program freezes and will not open. I can only successfully open Illustrator once in each tent 4 or 5.

  This drives me crazy, is anyone else having this problem or know a way to fix it?

  Thank you

  Liam

  Hi Liam,

  Please try following steps:

  1. close the AI.

  2. navigate to C:\Users\your username\AppData (hidden folder) \Roaming\Adobe\ Rename 'Adobe Illustrator 19 settings' folder 'old Adobe Illustrator 19 parameters.

  3 re launch HAVE and check.

  Thank you

  OM

• When I try to restore my iPhone 6, it keeps freezing on the loading bar.

  About a day after buying an iPhone 6 (16 GB), it began to restart loop (the logo of Apple, black screen, Apple logo, etc.) constantly. Over the next few days, this dilemma has happened more often, until I started looking for a solution. I tried everything, nothing worked. Thought it was a software problem, I have so I installed the beta version of IOS 10, hoping that the software does not contain what I well was a bug. He worked, for a day, while the closure began. Then, I visited my local EE store (where I bought the phone). They said they couldn't do anything while he was running the IOS beta 10 in which I installed. So, I put my phone in recovery mode and tried to restore the device. However, when iTunes was finished the extraction software, my phone has decided to restart. The phone was stuck in recovery mode and I could not access the device. I tried to do the restore again, and iTunes extracted the software successfully, however, when the loading bar was revealed, he didn't budge. I left the phone for an hour, which has yet to result in any kind of progression. For the entire hour, iTunes also said "Waiting for iPhone" or something of the kind. I have since renounced solutions after trying several times to restore the phone, which leads only to no progression of the extraction of the software. All solutions?

  Hi AtomicSamantha,

  I understand that your iPhone is stuck at the start after trying to restore with recovery mode. I know it's important to have an iPhone that can run when you need it, so I'm happy to provide advice to help this issue.

  To eliminate the possibility of a communication problem, the cause, my first recommendation would be to try to restore the iPhone in recovery mode, first with another well-known USB cable, then with another computer well known or network if necessary.

  If you continue to have problems with your power on iPhone after trying to restore with all new connections, you can find more information by using one of the Apple here support resources:

  Contact Apple support

  Thank you for using communities of Apple Support, cheers!

• Firefox crashes when loading websites, freezes when I try to download any file and completely freezes when I try to access the Options menu. Help!

  As he says, I had a difficult time with Firefox lately, and I think that it's corrupted. I tweaked the settings according to the suggestions on this forum and others like him, but they made the problem worse. I've updated to the latest version of the browser that has not helped, and I finally tried the "Reset Firefox" button, which was worse than anything. I lost my custom settings and Add-ons for nothing, the problem persists.

  More frustrating is that it completely crashes whenever I click on tools > Options, so I'm not able to make changes to this new configuration. If I export my favorites safely, I will try to uninstall the browser and re - install an older version of it, but of course it now freezes when I try to export the bookmarks file.

  Thus, apart from trashing it and starting over... any suggestions?

  For the record, it's Firefox 28.0 (do not know what version it was the beginning of the sentence), and the window "On Firefox" said that it is up-to-date. I am running Windows XP.

  Thanks for any help or enlightenment, you might be able to provide.

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

  Please report back to see if this helped you!

  Thank you.

• Mac freezes when I go on facebook

  My Mac freezes when I go on facebook

  Hi there obxbes,

  It seems that all of your computer does that when you go on the FaceBook site. I would start by starting in safe mode, to erase a few caches as well as system-level to perform a disk check and repair if necessary:

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  From: try safe mode if your Mac does not start-up

  If this does not resolve the issue I would like to use then these two articles to fix Safari:

  If Safari does not load a page or a page Web elements are missing

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues

  Thank you for using communities of Apple Support.

• All my apps Adobe Creative Cloud crash or freeze when my laptop is charging, but not when I am on battery!

  Hi all

  I use premiere Pro, after effects, photoshop and Media Encoder and they all seem to experience problems when my laptop is in charge, most commonly freeze and become unresponsive. However, when the battery power I have no problem what so ever. I will be leaving for college in a few weeks and I really need this problem is solved here here! Help, please!

  My laptop:

  MSI GS70 Stealth Pro 097

  Main features:

  Intel i7 4720HQ

  NVIDIA GTX 970 m 6 GB

  16 GB of ram

  Windows 10

  All my apps are up to date as well as all the drivers.

  Thomas

  Thank you! It totally slipped my mind to verify that! After have toyed around for a few minutes here, I found that by default programs are run on integrated graphics card when on battery or power supply. However, when the load, it seems that during the purification of sequences he keep a discreet graphics which, then, for some reason causes gel. When it does not switch to the discrete card, so no question of a battery. I went into the control panel Nvidia and changed the default settings to run the program on the Nvidia card always from the outset and until now the problems seem to have disappeared! For some reason, it was to pass between the two different graphics processors that was causing me problems. Thanks again for your help, I can't believe that slipped my mind.

  Thomas

• Rocket + freezes when I try to view the music

  I recently had the Fuze + 8 GB (and previously owned the original "rocket") and didn't notice the slowness in the display lists of music, moving by artists to the albums of songs, etc., but in the last days it's flat out freeze whenever I try to view my list of music.

  I may have a large amount of music 6.5ish concerts/1300 songs and in the last days, I listened through my full music list, but this does not really explain why he keeps freezing.

  Now when I turn it on, it will make up the screen of loading for a long time, freeze for a few minutes, when the loading thing stops lighting upward in a circle, then whenever I try to click on the music of the list 5 or 10 seconds later will go to a black screen and stay like that.

  I just downloaded new firmware today (of course with the problem of loading screen it's not certain how the really accepted mp3 upgraded) and the Player responds very well to plug it into the computer and is recognized by the computer, but all the problems listed above are still visible.

  My original rocket had another problem of gel at some point and I had to reformat manually by plugging a button on the computer, and I was wondering if I should do it, or if this problem is solved in another way.

  While the rocket + is off, hold the button low volume while connecting to the computer. The device should then be recognized as a removable disk. Format the Sansa and reload your songs and I hope that You 'l' to get a faster browsing on the music list. I would also say that you download Mp3tag and make sure that the tags are set to ID3v2 (Id3v2.3 ISO-8859-1.

• My pc freezes when I update Battlefeild 3. He won't open other programs such as stracraft2. I get an error of ubd.exe

  OK, I had problems and I can't seem to fix. Im running windows 7, my pc freezes when I update battlefeild 3. He won't open other programs such as stracraft2. I get an error of ubd.exe as well and when I start it tell me to run Chkdsk... but the 10% that I have black screen. I can't make backup either cause it shows me what
  Windows skipped C:\Users\Jehan\Documents backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Public\Documents backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\Downloads backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\Music backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Public\Music backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\Pictures backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Public\Pictures backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\Music backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Public\Music backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\Videos backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Public\Videos backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\AppData\Roaming backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\AppData\Local backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\AppData\LocalLow backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\Contacts backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\Desktop backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\Downloads backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\Favorites backup because it is about corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\Links backup because it is about corrupt C:\ drive.
  Backup Windows ignored C:\Users\Jehan\Saved games as it is on corrupt C:\ drive.
  Windows skipped C:\Users\Jehan\Searches backup because it is about corrupt C:\ drive.

  Original title: Helppppp!

  OK, I got the boot with command prompt and all that. But as soon as it starts to load I have black screen. Also with system recovery I get black screen, all the same when you do the ChkDsk... black screen 10%. :(

  Hello

  Thanks for the reply. Sorry that I don't know what the problem is. It might be a problem with your hardware.
  Before performing the steps below, please make sure that your HARD drive is shaped using the following application by checking the reallocated sector Count attribute
  CrystalDiskInfo ()http://crystalmark.info/software/CrystalDiskInfo/index-e.html( )
  The screenshot below shows a perfect HARD disk: http://crystalmark.info/software/CrystalDiskInfo/manual-en/images/Main.png
  Do you have your Windows DVD? Please try to run System Recovery for your Windows DVD and check if the problem persists. You can also try to re - install your windows, if you continue to receive such errors.
  Please take a look at the following article if you want to repair your computer using your Windows DVD: http://www.bleepingcomputer.com/tutorials/windows-7-recovery-environment-command-prompt/

  If you still cannot run the System Recovery Console or do not want to reinstall Windows. Please try the following to ensure that your system files are not damaged

  [1] method: Using Microsoft Windows Resource Checker to verify system files

  NOTICE: You may need your Windows CD to do

  • Recovery Options, select command prompt
  
  
  NOTICE: You will need your Windows CD to do this next step
  • Insert the following text when the window opens: sfc/scannow
  • When the scan is finished, please try restarting your computer and check if the problem persists.

  Thank you
  I hope this helps :)

• laptop freezes when performing automatic maintenance

  My sony vaio SVE15137CGW (Windows 8) started to freeze when the automatic Maintenance starts (after staying idle for a few minutes). A black clock appears on the task bar, so I know that the service is running. I can market to stop the gel which is a real nuisance.

  What could cause this problem and how can I solve this problem? How can I disable the automatic maintenance until I solved the problem? I followed the instructions on the Web page below, but the interview turned on even once after a reboot:

  Hello

  Automatic maintenance facilitates efficiency slowed and allows the activity to execute in a timely and prioritized way. So, the event that is configured to run will begin when the previously described (defined by default at 02:00 every day).

  the default configuration from the active automatic maintenance should do no harm at all. However, personal computers are not always lit, and nor are they heavily loaded by processes or data. Therefore, it is recommended to disable the automatic maintenance in personal computers to avoid the processing overhead.

  After the automatic maintenance turned off, you can manually optimize your PC by manually initializing the command CHKDSK of disk defragmentation, etc..

  You can check the link to find out how to disable the automatic Maintenance using Task Scheduler tasks:

  Refer to the suggestion which is marked as an answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-freezes-when-automatic-maintenance/fece2a5a-855C-4430-9521-a7ec666d61ff

  If you do not find the same performance after you disable the automatic Maintenance, reactivate tasks.

  Check out the link for more details:

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/jj835985 (v = vs. 85) .aspx

  Please let us know if the problem still persists.

• My Muse freezes when I try to import once in the list

  My Muse freezes when I try to import once in the list. Wait is nothing more... I can't work and I have a lot of work to it please help!

  I saw a post about the same problem, but for windows forum. A certain file was to be renamed, but I'm on Mac and uncertain how to proceed, as a search for the AdobeMuse file did not find anything.

  Using Mac OSX Yosemite, Muse CC was last updated.

  Thanks a bunch

  Hello

  You can solve this problem by renaming the folder 'com.adobe.AdobeMuseCC.2014.3' to 'com.adobe.AdobeMuseCC.2014.3_old '.

  You can find the file in the following location

  Finder > go > go to folder > type ~/library/preferences > press return

  This will take you to the preferences folder, and you can easily locate the folder.

  (Please make sure you leave Muse while that rename the folder)

  Concerning

  Vivek

• my pc freezes when first pro cc makes make 98%

  my pc freezes when first pro cc makes get 98%, it happens in the encoder to. This isn't the files. I put the file to project from the hole and the content of my work server and other computers it opens and makes it sound very well. but where mac computers and I'm on pc. I have the last cc first pro downloaded from cloude and my graphics drivers are up to date. My specs are:

  Processor (AMD Phenom™ II X 6 1055 t. CPU (6 x 2.80 GHz/6 MB of L3 Cache)
  Memory (Module of memory DDR3-1333 4 GB [2 GB X 2]

  Video card (NVIDIA GeForce GTX 550 Ti - 2 GB - single card)
  Motherboard (ASUS M5A97 - AMD 970)
  

  4gig of RAM to load a Windows 64-bit and a 64-bit Premiere Pro leash "virtually nothing" for the program to actually DO something

  Your least 8gig ram upward and try again... also, what is your version of the nVidia Driver?

  Right-click an open area of the Windows desktop

  Select NVIDIA Control Panel from the pop-up

  Select the SYSTEM INFORMATION in the lower left corner

  Version of the driver should be the 1st line in detail

  I have a GTX285 using 296.10 and Win7 driver