Does invalidate a field without a lock of the event, invalidate the field Manager?

Similar Questions

• Would I be able to communicate via USB without having to install the Desktop Manager?

  Here's my situation. My company has a software product for the office that communicates with a telephone connected via USB. Currently, it is a prerequisite to install the BlackBerry Desktop Manager to be able to use the ability to synchronize our software.

  What I am wanting to know is, somehow I was able to realize USB communication without having to install the Desktop Manager? Another question I have is, if it is possible to do this without having to install the Desktop Manager, would there be legal issues that should be considered in what concerns the packaging of the bbdevmgr as well as my package of office software?

  don't know, but I do not.

  It is the second hit on google for "blackberry usb driver.

  https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22&CPID=OTC-SOFTWAR...

  great entry in this list.

• Portege M700 - 3G does not work and has no entry in the Device Manager

  Hello

  I've already found [this | http://aps2.toshiba-tro.de/kb0/TSB0302TL0000R01.htm] for 3G installation, but it does not help me. In my device manager is no entry called 'Data Interface', and that's why the guide will not work. Under "modem" is only the "TOSHIBA Software Modem. The LED next to the orange wlan LED is off. When I use FN + F8, the I get only entries for Wlan and Bluetooth. In the Bios (or what ever Toshiba call a bios, 3 pages with very few options, very bad in my opinion) I couldn't find any option to turn on the 3g modem (I suspected that it be turned off in the Bios).

  Is there an option where my 3G modem could be turned off, so that the device manager would be ' d recognize it? WIFI and BT operate correctly.

  A new SIM card is correctly inserted in the SIM slot behind the battery. I can't find my problem described in the web or this support forum.

  Any help is appreciated!

  Hello use

  Your laptop is preinstalled with original Toshiba recovery image, I mean you have to factory settings?

• I loaded a new Firefox because F does not open. This new Firefox does not open. Not at all. The Task Manager shows some charges, but F not open. I rebooted, cleaned the registry, but F does not work.

  F earlier crashed, crashed etc. Now it does not start.
  I checked the virus etc.
  When I started a new load, no question of Add-ons or anything.

  Maybe firefox hangs do not crash

  • See Firefox crashes or does not - how to fix

• Open the file does not close on a remote computer through the computer management console

  I try to use the MMC snap-in computer management to connect to a remote computer that contains our shared documents to close an open file on the remote user's computer.  When I right click and select open close file, it seems closed in the MMC console, but the document is still open on the user's computer.

  Why does not close the file?

  Hello

  Please post your question here for assistance with the MMC snap-in:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

• I need help to create profiles of Firefox directly from the command line (script) without having to use the Profile Manager window step by step

  is there a way to provide command line arguments when calling the Profile Manager so that I can perfectly create a profile of an invocation? By the way the profile name and the location of the profile. I need to bypass the user interaction with the Profile Manager window. Thank you.

  http://developer.Mozilla.org/en/docs/Command_Line_Options#User_Profile

• computer Windows does not recognize my 2nd hard drive but the computer management and the two bios say he's here?

  Secondary drive of HP laptop.  Vista ultimate 64 bit OS.   I installed a hard drive, formatted with computer management, check the bios, as saying that this is? I haver to do?

  Steve, run Bios secondary ck drive it passeds all tests.

  Computer management is fwhat I used for the format and the name of the drive.  It recognizes the drive!

  When I click on computer is not there? Why

  No errors, Ran H P health check it says his State there but intelligent smart stranger.  BIOS says smart successful test.

  Returns the 320 GB sata drive and bought a 250 GB sata drive it works. Don't know why computer windows didn't see it or report it defective.

  Another problem I had.  I have replace the c drive he had run a windows launched out of the backup of the computer, to another drive. tried to restore it. It did not restore my nero or any other software and updates.  Is there a way completely a backup disk and restore all on a new drive.  I'm not stealing everything that I bought everything.  Norton Ghost will do it?  E-mail address is removed from the privacy * pls send an e-mail.

• 5 Lightroom does not start but shows that run in the Task Manager?

  Hello

  I use Lightroom 5.7 (64-bit) on a Win7 machine and it worked perfectly until a few days ago. Now for reasons unknown to me, it will now not start correctly. According to the Task Manager, run, but nothing appears on the screen. It shows as a running process with about 15 020 k. If I try and interrupt the process he won't stop until I've tried 4 or 5 times.

  I tried to rename the file to preview force it to build a new file and optimize the database and he ran once, said he was checking the catalog and then came back to the same behavior.

  If I can get it started I can return to a backup of database.

  Help appreciated.

  Peter

  Thanks for the comments.

  It turns out that Lightroom is not guilty.  The hard drive containing the catalog was not, and although tests seem to show like OK it was made only reading / writing at a fraction of the correct speed. If Lightroom was very time consuming to read it's own catalog.  It tooks 48 hours to exemplary concert 1 of data off the drive.

• iPhone5 does not ring when it is locked

  iPhone5-16 G-

  iOS 9.3.1

  My iphone5 does not ring when it is locked

  during a call if I press the power button or any key, it sounds

  I checked "do not disturb" and silent and other key

  Hi mehdi.gh,

  Thank you for using communities Support from Apple!

  I understand that your iPhone sounds when it is locked. I see that you have already tried a few great troubleshooting as well.

  To continue troubleshooting, I suggest reading and working through the information in the following article. Some of these steps you have already performed, but for completeness, I suggest to work through all the steps.

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

  See you soon!

• I already bought the movie HD, 'V for Vendetta', before it came with "iTunes Extras" but my purchased copy does not come with the Extras. Is there a way to fix this without having to buy the movie again?

  I already bought the movie HD, 'V for Vendetta', before it came with "iTunes Extras" but my purchased copy does not come with the Extras. Is there a way to fix this without having to buy the movie again?

  I was told that movies in the iTunes Store can be changed to include "iTunes Extras" if originally it did not come with extras. But there is a catch you get just the extras if you buy just the issue for the first time. If you have already purchased it, your version may not have the extras. This means that if you want the extras, buy the movie again.

  If you now get the Extras will depend on what the movie studio did for example if they have updated the version you have purchased, or replaced by a new version (which will be treated as a separate purchase): buy and play movies with iTunes Extras - Apple Support

• Windows 2008 Server: unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Hello

  I suggest you to send your request in this forum for better support.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails. Also Microsoft Office Outlook often does not open without having to restart the pc. ___

  I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails.  Also Microsoft Office Outlook often does not open without having to restart the pc.

  Hi hound3101,

  Welcome to the Microsoft Answers community.

  a. you are able to install some other updates?
  b. do you receive error messages when you start Microsoft Office Outlook?

  If you have a problem only in the Office Update installation, then I suggest you to report your problem in the Office Discussion groups. If not, try download office update from the link below and install it in clean boot mode.

  Link to the Group Discussion Board: http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx

  To enter the mode of clean boot of your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after starting the computer, install the update.

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.

  Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.  I see other people have had similar problems, but I am not able to follow these solutions and would very much help here.  I have an IMac.

  If you had probably two problems

  Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.

• My indesign is locked in the hand tool, what I'm doing!

  My indesign is locked in the hand tool, what I'm doing!

  Take off your space... (?)