Windows Explorer crashes on startup and cannot be restarted

Similar Questions

• my windows Explorer crashes on startup

  First of all, I have a Dell Inspiron with Windows 7, he made a few updates as a couple of days, and now in the last two days, my windows explored hangs just for no reason, usually right start, before I even do at all, I even had several times manually just turned off the computer all together, all the world knows what he is It had not done before yesterday

  Hi Corey Guthrie.

  I see that windows Explorer crashes on startup. I'll help you with this problem.

  1. what security software is installed on the computer?

  2. are you able to boot to desktop screen?

  Method 1.

  If you are able to boot to the desktop screen, you can try a system restore and check.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Method 2.

  If you are unable to boot to the desktop, and then follow these steps.

  Step 1.

  Start the computer in safe mode and check if that helps.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  If you are able to start the computer in safe mode, you can restore the system to safe mode.

  Once you are able to get to the screen and the computer still restarts, then you can perform these steps.

  Step 2.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 3 of article start normal to start.

   

  Step 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Step 4.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Try these steps and let us know the status.

• I get a message saying that Windows Explorer has stopped working and when I restart it pop again.

  Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?

  original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.
  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Tecra S3 Windows Explorer crashes on copying files and other actions

  Tecra S3 Windows Explorer crashes frequently on the copy of files and other actions. In the system event log, you find the event ID 26 Application Popup Explorer.exe Application error problem (in Dutch: Toepassingsfout) read write memory error.

  Start the Softex Omnipass Service service. Change the startup type to automatic. The problem will not happen again. You don't have to use this application after the service started.

  Post edited by: wboere

  Hello

  Unfortunately, this path is not easy to say anything because, who know what did you do with OS and how is your personal configuration. If this problem occurs because some time roll back OS to an earlier time using System Restore tool.

  Also check this page useful http://www.helpwithwindows.com/techfiles/explorer-crashes.html maybe you'll find some answers there.

• Explorer Windows 7 crashes at startup.

  Hello
  I am facing the problem, whenever I turn on my pc, restart windows 7 starts there is an error crash windows Explorer close or restarts the program, when it is everything works fine, the error in the message box that says app crash. This happens whenever I start the pc.

  Hi Anas Ahmad Shah,
   
  You're welcome Anas Ahmad Shah.
   
  Now, you may need to check which startup item is causing the problem to occur.
   
  To do this, you may need to enable half of everything first to determine which application is causing the problem to occur the startup items.
   
  If the first half is not the origin of the problem go to the second half and activate the startup items and check.
   
  In this way, you would be able to determine which item is causing Windows Explorer crashing.
   
  Follow the steps in the clean boot article given in the previous post.
  
  http://support.Microsoft.com/kb/929135

  Aziz Nadeem - Microsoft Support

• Media players and windows Explorer crash

  Hello

  Recently I got this problem where my windows Explorer crashed whenever I opened Control Panel, specifically, whenever I tried to view the system information. I tried a few "solutions" that I saw on the internet nothing has worked so far - this all started about 2 months ago, when I tried to update my graphic drivers.

  Then a few days ago I was watching movies with my laptop and I fell asleep while the film was presented, my laptop is not plugged the battery flat overnight. When I woke up and return the laptop computer he would play no matter what video file with any of my media players (Windows Media Player, GOM or VLC) - when I try to open the video file, it simply says that GOM/VLC/WM has stopped working, then closes.

  Important notes:

  -I am able to watch movies if I boot in safe mode (there is simply no sound.)

  -I can also go in control panel - system of information if I boot in safe mode.

  -I am running windows 7 (with the latest updates)

  -J' use a pavilion dv6.

  -All music files open with media players, the problem is just video files.

  I suspect it's a graphics related question, but I'm not sure. It works as it should when it is in safe mode, but I don't know how to say what is causing the problem.

  Many thanks for any help :)

  Hi Mithrandir,

  I found the problem!

  I updated the graphics driver and that seemed to do the trick - the players videos play in all media and is not any control panel crash or media players.

  The only problem I have now is that after the backlight driver update does not work (although it is a driver issue it seems that many people have had) - I was wondering if you know if it is possible to reinstall the previous driver (not just go back to it, but have in fact all this re installed because I think there's maybe a corrupt file or something like that which was causing the) problem)

  So, as I thought it was the graphics driver that caused the outcome...

• Windows Explorer crashes and get this error in the event log: maximum number of ATI EEU session has been exceeded

  Windows Explorer crashes and it is what I have in my event log. Can anyone help?

  Exceeded maximum number of ATI EEU session

  Hi TodFranklin,

  1. when exactly you receive this error message?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 provided in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• Restarts and Windows explorer crashes

  Original title: can't access my files, windows exp, accidents and first time everytime I try
  Recent problem, can not access my files in my computer without the Windows Explorer crash and re start everytime I try.

  What should do? Am no computer expert
  David

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. I suggest trying the suggestion provided and check.

  1. don't you make changes on the computer before the show?
  2. What is the brand and model of the computer?
  3. you receive an error message?

  Method 1:
  Step 1: Check if the problem occurs in safe mode.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 2:
  You can try the suggestions of links and check.
  Windows Explorer crashes randomly in Windows 7 or in Windows Server 2008 R2
  http://support.Microsoft.com/kb/2638018
  Windows Explorer may hang in Windows 7 or in Windows Server 2008 R2
  http://support.Microsoft.com/kb/2515325
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 3:

  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 4:
  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  You can access the links provided to give us more information about the event viewer.
  Open Event Viewer:
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Just reply with the results. I'd be happy to help you further.

• Windows Explorer crashes. How can I fix it?

  Recently, whenever I boot my Win 7 Ultimate, after that my programs are loaded, Windows Explorer crashes. How can I fix it?

  Hello

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• Windows Explorer crashes failed msvcr90.dll

  Friends

  I have this most annoying problem. It happens on my computer and the computer of a friend. I have Vista Pro 64 bit and my friend a Windows 7 Home Premium, also 64-bit.

  We both use the same two programs for a specific project, we want to do. A program is a data management program called FieldWorks, where export us the data in the format of LibreOffice. I think that this problem started during the installation of LibreOffice and then begins to export stuff in the program of FieldWorks.

  Very often, when we click on an exported file in .odt (LibreOffice) on the desktop, or simply click anywhere in a folder on the desktop, where we store .odt files, then immediately the Windows Explorer crashes with the following error message:

  Explorer Windows has stopped working. Windows can check online... Check online... The details of the problem are:

  Problem signature: problem event name: BEX64 Application name: the Explorer.EXE Application Version: 6.0.6002.18005 timestamp of the Application: 49e02a1e fault Module name: MSVCR90.dll fault Module Version: 9.0.30729.6161 fault Module Timestamp: 4dace4e7 Exception offset: Code of Exception 00000000000552d 4: c0000417 data exception: 0000000000000000 OS Version: 6.0.6002.2.2.0.256.6 locale ID: 1033 additional information 1: complementary 46e0 2 information: information additional 4ce498f1e2ebb3719af008d4ef97bedc 3 : 7 d 05 additional information 4: 729ac305dabb24e28fbe99019ecbbab7
  Also my friend and I get the exact same message and the same fault Module name and version. It can happen several times in a row, insofar as we cannot get to any of the .odt files in the folder via the Windows Eplorer window or desktop, but I got a remove the .odt file in a command window.  Otherwise just Explorer to crash. :-(

  I tried many things to fix this, among them:
  1. I re-entered the msvcr90.dll
  2. I learned that it is the program of MS Visual C++ 2008 that installs this msvcr90.dll and use it
  3. I removed all instances of MS Visual CC ++ Vista computer
  4. I removed all instances of the msvcr90.dll and restarted. Then I made sure that no file with this name has appeared again.
  5. even after that I still get this crash explore with this error message about this being the fault module msvcr90.dll!
  6. I used Windows find defective or missing files, sfc scannow. No gain.

  How this possible error, if there is no msvcr90.dll is left on the system? And no Visual C++ 2008?

  I then tried to reinstall MS Visual C++ 2008 SP1 Redistributable to see if that helped, but once again no change. :-( The same error came once again. This version of Visual C++ have not yet installed a version of msvcr90.dll but a msvrc100_XXX.dll

  Until I deleted the MS Visual C++ 2008 (and 2005 and 2010) of my system, I noticed that the existing msvcr90.dll was not even the same version that says that this error report is the version of the Module of fault!

  I am quite at a loss here. What can I do to solve this problem, which is annoying and time consuming? I could send one .odt files, someone at Microsoft to look at, or what?

  Thank you
  Calle2012

  The problem seems to be the shlxthdl_x64.dll:

  WARNING: Unable to verify timestamp for shlxthdl_x64.dll
  ERROR: Module load completed but symbols can be loaded for shlxthdl_x64.dll
  Failed to load image C:\Windows\System32\ieframe.dll, 0n2 error Win32
  WARNING: Unable to verify timestamp for ieframe.dll
  Probably caused by: msvcr90.dll (msvcr90 invalid_parameter + 70)

  The shlxthdl_x64.dll, which is at version 3.6.1.2, is a component of LibreOffice.

  The error that you are experiencing seems to be a known issue:

  https://bugs.freedesktop.org/show_bug.cgi?id=52078

  This problem can be fixed in an update of LibreOffice, so make sure you're running the latest version.

  If you are running the latest version of LibreOffice or if the error persists you can try the following:

  Go to the following folder:

  C:\Program Files (x 86) \LibreOffice 3.6\program\shlxthdl

  In this folder, right-click and rename the shlxthdl_x64.dll to shlxthdl_x64.old.

• Whenever I try to open a picture of the windows Explorer crashes

  Windows Explorer crashes and then restarts automatically

  Hello

  ·         Since when you are facing this problem?

  ·         Did you change your computer before this problem?

  Method 1:

  Try to disable the auto restart in case of system error and check if it helps.

  Refer to the section restart turn off Auto on the failure of the system of the below article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Try to check the event viewer logs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Method 3:

  Put the computer in a clean boot state, and check if that helps.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 4:

  I also suggest you to consult the article below and check if it helps.

  http://support.Microsoft.com/kb/950685

• Windows Explorer crashes every 2 Minutes like clockwork

  Hello

  A quick Google search, it seems a lot of people have this problem, but with a few differences.
  My problem is that for these last two days, Windows Explorer has started crashing, almost like clockwork, almost every 2 minutes or more (as confirmed its reliability). I tried everything I know to find the problem, but came to nothing.
  Here are my specs:
  Windows 7 Professional 32-bit
  Intel Core 2 Duo PC TG5750 @ 2.00GHZ
  RAM: 2.0 GB
  I tried to run Windows Update to see if that would help, but it's not download anything. It just happens to 0KB and 0% and nothing happens. Naturally, when Windows Explorer hangs, it must update Windows with it.
  I ran a few system cleared my startup speed performance, but nothing else. He does not come back on other potential failures.
  I looked at doing a system restore, but it says that there is no restore point. I created one, but this is obviously useless as the restore point is now in the scenario where Windows Explorer crashes.
  I can still run programs like Outlook or Google Chrome, but Windows Explorer plant, yet no matter what I do. I have installed all the programs in the last two days so I'm really at a loss as to what is happening.
  I also restarted my computer several times, to no effect.
  Other that completely re install Windows using the installation disc, I don't know.

  You can open the Action Center under the taskbar > maintenance > view reliability history > view all reported issues

  You can right click on some of the mistakes "Stopped working" "Windows Explorer" > view technical details

  What are the details of the errors?

• Windows Explorer crashes

  Windows Explorer crashes and I can not open the explorer.exe

  Try to clean the operating system using CCleaner clean the registry and check if that helps

  You can also try to set the operating system at the beginning point of time before this problem appeared

  In the worst cases, you need to reinstall the operating system

• Windows Explorer crashes when you try to open avi files

  I can't open avi files as windows Explorer crashes, if I open even a folder with an AVI in it, then windows Explorer crashes.

  I tried to run the Mats_run_codec from microsoft, but it just says: I need to run dot_run_fx (box 2), but when I run it I get the error message - system error: 0 x 80131107.

  I am running windows XP SP3

  I have seen "Event Viewer" and found the following: application

  Event type: error

  Event source: Application Error Event Category: no ID:1000 event date of publication: 14/03/2011

  Time: 20:04:22 user: n/a

  Description:

  Failing application iexplore.exe, version 6.0.2900.5512, failed module urlmon.dll, version 8.0.6001.19019, address 0x0002df6e failure. and the other error event is - Faulting application explorer.exe, version 6.0.2900.5512, failed module ntdll.dll, version 5.1.2600.6055, fault address 0 x 00011053.

  I hope someone can help as this has happened for a few weeks now.

  Firefly1z

  FIXED! Large.

  Windows Essentials Codec Pack (WECP) corrected all the problems immediately.

  "WECP is designed as an almost complete solution for all your video and audio should" see: http://www.mediacodec.org/

• Windows Explorer crash exception c0000005

  Original title: Windows Explorer Crash

  When I try to create a portfolio of 'My Documents' explorer.exe crashes. He bagan when the Briefcase is not responding because Data Execution Prevention stopped the process. Then begins the Explorer window crashes. The application error message is that it generated an exception c0000005 at address 7E4DB9AA2(,nosymbols>). The following error - what the failing application, version 6.0.2900.5512, faulting module synceng.dll version5.1.2600.5512 explorer.exe. address failure 0x00001a11. What is my problem and how do I fix it. Please help me. I need to sync my files desjtop with my laptop because my laptop crashes. Now my office explore does not work.

  Thank you

  Nancy

  Windows XP service Pack 3

  If you have SP3 installed, you also installed KB938828.

  You can read here all the things that are included when you install SP3 (including this update), so you shouldn't have to install again.

  If you get the DEP errors, I suspect a third party extension of the Explorer.  If someone offers you make an exception to DEP for Explorer, this is the wrong idea.

  DEP errors occur when XP shuts down an application because she feels threatened by the latter.  XP should never feel threatened by his own substance - like Windows Explorer or Internet Explorer.  If XP gives you an error DEP of one of these applications, something is wrong with them and the best thing to do is to understand what the problem is and fix it (or I guess you can just start to try things and maybe get lucky).

  Also, we are not a 'thing' on your system, what makes blind troubleshooting especially a roll of the dice.

  But, let's see how you go with this idea of clean boot and optimization of the Microsoft Support Engineer and you can check if this may help.