Does not connect Internet, router or modem is not available.

Similar Questions

• Connection WRT54GL router Netgear modem.

  I am trying to connect a TV to the internet using a WRT54GL router and a NETGEAR DG834GT modem. I have configured the router by using the wizard, and I can connect to the router with my i phone or laptop. However the router does not appear in the available on Setup Netgear wireless networks, and it is not connecting to the lan either cable modem. Any help would be really appreciated.

  Thanks for the quick response. I'll do

• ORA-16086: standby database does not available? Help me

  Hi all
  I use logic ensures db,.
  my database is very well that there is an error: ORA-16086: does not log pending available files, standby database contain
  It's log_archive_dest_2 on the primary database: log_archive_dest_2 = "service = LGWR SYNC dgora SAY valid_for =(online_logfiles,primary_role) db_unique_name = dgora'"
  
  even then, oder data still are transported from primary eve db db and then applied on the eve of the database.
  I run the command: select group #, the journal of v status $; -> the result is normal.
  
  can someone help with this problem?
  
  I thank you,

  They are a bit like the pads to do it again.

  It will speed up to apply, rocking and tilting.

  Standby Redo Logs are similar to online redo logs and the difference between the two is that standby Redo Log is used to store restore data by progress coming from another (primary) database.

  Standby redo logs are used only when the database_role is in sleep mode, it is recommended to add in the primary also so that they can be used on the evolution of the role, however, in the normal course work standby redo logs will be used at all on the primary.

  Using groups of waiting for redo log depends on the rate of generation of redo, you can see only 2 newspapers roll forward pending use even if you have 4 groups of waiting for redo log, when the production of roll forward rate is lower.

  It is recommended to have a group of newspapers of recovery sleep when redo production rates are high and all of the current log roll forward pending use.

  Best regards

  mseberg

  Add correct you issue?

  Published by: mseberg on July 20, 2011 08:17

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• Linksys Router WRT160N - Wireless does not connect to the cable modem

  I installed the Linksys WRT160n router to replace an existing G router. When installed the new wireless router works, but the router does not receive a connection (IP address - look under status) of the cable modem (so no internet). When I reconnect the old router and then connect the new router, I get any internet connection through two routers (so the old dishes router the IP address that accepts the new router).

  I have configured the router N new for

  "Automatic configuration - DHCP", no need for connection, IP address dynamic, etc (as required by ISP - Timewarner)

  I tried to renewal and release IP address by the router N when it is connected directly to the main switch (the switch to connect to the cable modem). In so doing, shouldn't that assign a new IP address to the router?

  I am allowed 3 IPs from the cable company (because of the switch) and I use all three with three different internet IP cameras to each address for home security system.

  Any suggestions on why the router is not connecting to the internet? Do I need to reboot physically everything on the network, including the cable modem?

  If I understand your post, you said that your ISP gives you 3 Internet IP addresses and you have 3 cameras that use one of these Internet IP addresses.  If this is correct, then that leaves no IP Internet address for your WRT160N use - so that would explain why your WRT160N cannot get an Internet connection.

  If I misread your post, and you have an Internet IP address available for the WRT160N, you might have a problem with your modem and two WRT160N tries to use the same 192.168.1.x subnet.  To check this, follow these steps:

  (1) Please indicate addresses that use your cameras (IE before you take the test below).  If the addresses do not begin with 192.168, then erase the last half of each address.

  (2) Please indicate your ISP

  (3) Please indicate the make and exact model of your modem (not the WRT160N) number.

  (4) Please do the following test:

  Put your entire network.  Disconnect the switch (including cameras) to the modem.  Using an ethernet cable, connect your modem directly to your computer.  (Do not use the WRT160N for this test).  Turn on the modem and the computer.  Make sure you have an active Internet connection, then go ahead with what follows: (even if your Internet connection does not work, include this and move forward.)

  Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig/all" (with no quotes), and press the Enter key.   Copy all results in your next post.  To make the copy, highlight the results, and then use the keys copy (Ctrl-c) and paste (Ctrl-v) keys.  If your "IP address" does not begin with 192.168, then for security reasons, delete the latter half of your IP address.

• New Samsung UHTV connects to the router, but does not access Internet

  My new UHTV Samsung detects the private network (router) OK, but the TV does not connect to the Internet.

  All other devices (PC, radio) I can access the Internet through the router without problems.

  Before I read too many books, can someone point me in the right direction?

  ElaineM,

  I tried everything in the book - without success; so finally, I reset and reconfigured the router.

  He now works as usual, and I hope it will stay like that.

  Thanks for you patience and support.

  Björn

• My computer does not my router Linksys detect my internet connection. Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.

  connection and download Internet problems

  My computer does not my router Linksys detect my internet connection.  Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.  How to solve these problems?  so that my programs to work, I need these features.

  Hello

  1. you are using a wired or wireless?

  2 have you made any changes to the computer before the show?

  3. you receive an error message when you try to connect the Linksys router to the computer?

  4. what exactly happens when you try to update I Tunes?

  5. you receive an error message while updating I Tunes software?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below and check if the problem persists.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• Cisco E1000 does not connect to internet-do not get the Comcast modem DHCP ip address

  Very strange problem...

  I have Comcast HSI and use my E1000 Cisco (Linksys) for about 3 years now. Bought as a refurb.

  My problem is that the E1000 is NOT receiving DHCP of my modem Comast info.

  Internet works when my laptop is fixed directly to the modem; but when he connects to the internet port of the modem

  to the internet port of E1000 is NOT attract my IP from DHCP ISP so no client can broswe 'wired or wireless.

  I've even updated the firmware and starting to think its time to get a router 'NINE', as it is NOT LOGIC!

  I can't release/renew as I have NO ip address for free.  I tried to configure the E1000 as static

  using the ipconfig/all for when the laptop computer and the modem is connected. Comcast said they don't see anything on their end.

  I also have factory default router and Redid the config without result.

  Any help would be appreciated.

  You must activate the clone MAC address of the router to recognize the connection to your cable modem. The link below will tell you how to configure the router to work with a connection cable and how to clone MAC address.

  Setting up a Linksys router with cable Internet service

• My router blew up... not really, but it does no permanent internet connection, help?

  Whenever I use my WRT160N V2 router, I'm constantly connected to the network and the internet (according to the network on my Vista Ultimate desktop icon)

  However, half the time I enter into a Web page or click on a link, it takes a very long time to load, and then I get the error "address cannot be found, make sure that you're not stupid, and equip enough W there.»

  I literally have to refresh about 2 or 3 times before it will come back.

  In the meantime, my applications that remain on the internet continue to run and does not give me an indication that the internet has declined. My character in Everquest II just runs and as she always does, no lag at all.

  I decided to go back to my caveman ancestry and I plugged my WRT54Gv5 (I don't really know if the version is 5 or 6, I'm rather blind) and it works better than the more recent (and more expensive) model. In fact, this works perfectly except that there is no wireless in this House (stupid concrete walls) so that if all the doors are open on the way to the other computer.

  I wonder what could cause this problem, if anyone is familiar with this, please let me know.

  It is a known problem with the WRT160N V2

  See this thread, with the review of 25 + page to this topic...

  http://forums.Linksys.com/Linksys/board/message?board.ID=Wireless_Routers&thread.ID=119107&view=by_d...

  Linksys has now re-posted the firmware "008" mentioned on the page of suppport WRT160N v2 (the "011" version caused the problem, restoring it to "008" should solve)

  http://downloads.linksysbycisco.com/downloads/WRT160Nv2_v2.0.02_008_US_code, 0.bin

• I can't access my internet. He said he found no network. It does not seem to recognize my cable modem. It is said that he was unable to connect to a service.

  My Network dissapeard

  Hi I cannot accese my internet it tell me there is no network not found, it does not seem to recognize my cable modem. It is said that she has not to connect to a service.i have tried to restore the computer to another point and it does not cant run my norton anti virus or update please help

  Hello

  You can uninstall the driver from Device Manager network, put it back, once again.
  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. find the network card, right-click on it and select Properties.
  c. go to the driver tab and click Uninstall to uninstall the driver associated with the device

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET