Does not connect to 5 mhz WiFi

Similar Questions

• Windows 7 does not connect to the new wifi networks

  I have a problem with connecting to wifi networks. My laptop only connect to wifi networks that I have already connected to in the past but does not connect to all nine. The computer will recognize the but won't give me the possibility to type in any password. For example, I can connect correctly to the House and my moms place as wifi passwords are already saved on my computer. However if I go to a friends house their wifi signal will appear but when I go to connect I will not have to enter a password, the mouse cursor will simply show it to load a few seconds and then nothing happens.

  Can someone help me?

  Hello James,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  This problem can occur for the following reasons:

  -WEP, WPA or WPA2 key or password security issues.
  -Incorrect network connection settings.
  -Corrupt or incompatible drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• BDP-S570 - does not connect to internet via wifi

  I just bought this today and it does not connect to the internet via wi - fi. I'm entering properly (my iphone, ipad and computers connect very well). I called tech support and they had no idea what either. I then connected with an ethernet cable, updated to the latest firmware and tried again with no luck. Does anyone have any suggestions? It shows that the wireless is OK, but Internet Access - failed. When I return to the guests and have it analyzed the available networks, it shows that I am connected... something is weird. I'm back if I can't make it work in the next day or so.

  Network problems can certainly be difficult to diagnose.
  Here are some useful steps to check where your problem is.

  Check the IP address: is it 192.168.x.xx? or 169.xxx.x.xx
  If you have an address 169 it is a fake connect.

  What kind of network do you have? It's a Modem/Router combo? This is a modem connected to a router and then your Blu - ray player.

  the router/Modem combos are more complicated, and you need to consult your provider of Internet services (ISP) to connect to help. (maybe a MAC filtering problem?)

  If you have a problem with your Modem/Router try get a router and connect to the modem, you can have the best success with a stand-alone router you will have with a handset as they are less complicated to use.
  If you already use a stand alone, try to temporarily disable your security and test it without warranty.

  is the firmware updated on your router (not the S70 but the router) the latest firmware is sometimes useful.

  Best regards
  Kimberly

• iOS iphone 10 does not connect to the DHCP wifi

  Updated IPhone 6 to 10 of IOS, and now the phone will not connect to my BT Home Hub 5.  All other devices will still be another phone that has 10 IOS.

  The phone recognizes the router password, puts a blue check mark against the connection, but no wifi signal appears and remains on 3G / 4G.

  If I look at the DHCP information on the phone, it's all white is wrong.

  I checked on the router and the phone does not display as connected.

  I have reset the router etc.

  I reset the network connections on the phone, more hard recharge etc.

  I am at a loss, please help!

  Can you connect to other Wi - Fi networks outside your House?

  If not, to exclude a software problem, set back to settings factory, without using the last backup. Set up the coordinates manually, and then test the Wi - Fi connectivity.

  Use iTunes to restore your device to factory settings - Support Apple iOS

• Vista 32 bit does not connect to internet via wifi on new router. All other computers work.

  I upgraded my router Belkin G to a Netgear N150.  My computer laptop windows 7, ipad and ps3 to connect to the internet.  My Vista laptop will connect via cable but not wireless.  The wireless still works on the old router.  The new router DHCP assigns an ip address from my laptop to visa, but it's a unidentified network which is local only.

  I tried to reset the tcp/ip and winsock stack.
  I disabled wireless utility from Toshiba configFree.
  I ran:
  ARP d
  ping 192.168.1.1
  Ping 192.168.1.1 with 32 bytes of data:
  Response of 192.168.1.15: Destination unreachable host.
  Response of 192.168.1.15: Destination unreachable host.
  Request timed out.
  Response of 192.168.1.15: Destination unreachable host.
  Ping statistics for 192.168.1.1:
  Packets: Sent = 4, received = 3, Lost = 1 (25% loss),
  ARP - a - v:
  Interface: 192.168.1.15 - 0xb
  Internet address physical address type
  192.168.1.1 00-00-00-00-00-00 Invalid
  ipconfig/all /allcompartments

  Windows IP configuration

  ==============================================================================

  Information network for the compartment 1 (ACTIVE)

  ==============================================================================

  Name of the host...: jennifer-PC

  Primary Dns suffix...:

  Node... type: mixed

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Atheros AR5007EG Wireless Network adapt

  Physical address.... : 00-24-D2-8B-4F-ED

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::6476:106d:3c70:4bf3% 11 (Preferred)

  IPv4 address: 192.168.1.15 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Thursday, February 16, 2012 20:11:05

  End of the lease...: Friday 17 February 2012 20:11:04

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 285222098

  DHCPv6 DUID customer...: 00-01-00-01-13-87-1B-E5-00-1E-33-80-70-41

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Description...: Realtek RTL8102E Family PCI - E Fast Ethern

  and NIC (NDIS 6.0)

  Physical address.... : 00-1E-33-80-70-41

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Description...
  . : isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F
  9 9}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 17:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F
  9 9}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...
  . : Yes
  Card tunnel Local Area Connection * 18:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {BCF6118F-5DAA-4C0C-BEBD-710E18983
  E72}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 19:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F
  9 9}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 21:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {0E605CFB-74AF - 441-A-8404-DC7C2175F
  9 9}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  I can't think of anything to try.  I really want to go back to my other router.  Any help would be appreciated.

  Solved.  Was a driver problem with Atheros adapter Vista security and network.  Downloaded new driver and Voila.

• My wifi network does not connect automatically

  Hi all

  im a user frustrated.

  My wifi network does not connect automatically, keeps asking me the password (even if I continue to score for remembering network). The password does not change.

  I also deleted the list of networks do not forget and do it again. Any help?

  Much appreciated guys.

  

  create another user account and start to this account, set up a wi - fi connection and restart to this account.

  Is the same behavior?

• MacBook pro running on IOS 10.11.5 does not connect to wifi on its own.

  My macbook pro does not connect to wifi instantly and sometimes not at all.

  While he looks for the networks, if I click the wifi icon, it shows my network wifi under 3 bars in the list of wifi, but even if I click on my wifi, it continues to search without connecting to it. After that it seeks for a while, it connects sometimes, but most of the time, a new screen will be pop up saying please choose a network and it will show my network on the list. If I click on my network and tap on connect, it will connect instantly.

  to connect faster, give less to think about:

  

  then ruthlessly prune this list select everything except your home network and use the [---] button to remove tham all except one that is important for you at this time.

  

  .

• iPad does not connect to the Wifi on the range 192.168.0. *.

  I have an iPad Mini (ME860BA) on os 9.3.1 that would not connect to my wifi at home.  He began to abandon their studies repeatedly a few months before and then just wouldn't connect at all.  It is on the os 9.3 so I upgraded to 9.3.1 but it did not help.  I was able to connect using a hotspot from my phone but no go on the real wifi. Sometimes it seems impossible to connect and others it seems to connect but without the wifi icon that appear (and internet access). All other devices connect to the House without exception (or question) - it's just my iPad.

  I followed every bit of advice I've found - turning wifi off & on, forgetting network, reset all the network settings, hard reboot, reboot normal, turning airplane mode turn off again, go up the brightness of the screen (odd) and finally I restored my router and the iPad to factory settings.  Nothing worked, so I took him to a store of Apple and waiting for the genius to see me I thought I would try to connect to the wifi and it went all right!  I felt a little silly to start with but they still took a look and said that he had 'something' bad, but they didn't know what.  Their best guess was that it was something to do with password authentication because they are client wifi has no password.  I returned home and disabled the security mode of the router - I have a Virgin Superhub running the 2.4 and 5 GHz primary wireless networks - no amount of adjusting the security modes (remove the password, make visible SSID, change of Protocol) makes all the difference.  However, knowing that it worked on wifi from Apple in the store, I was really puzzled.

  After ages bother with different parameters (especially in my router), I now know why it does not connect to home... My Virgin router to short on a range of address DHCP IP of 192.168. 0. * and my iPad suddenly won't connect unless the beach is 192.168. 1. * or higher.  (It connected OK for 2 years).  It took weeks to find this out, but at least now I can connect.  I turned on the wifi of comments because it uses the gamme.1.  Everything is good, connects the first time, every time!  I have not tried establishing a password (I was so happy, it connected I left because it was... well as I switch on the MAC filtering, for a little extra protection) I could try side password later and if it still connect, I'll update my post.

  My solution is very well when I'm at home but is not going to help if I get the iPad with me - it will be hit & miss if I can get the WiFi also.  Must be set correctly - I see no that it is hardware related, so there must be a bug in the software/firmware.

  Anyone having problems connecting to wifi can try the workaround network comments - at least it will get you.

  Is there a future fix for this?

  Re: iPad wifi suddenly does not save

  Change the range on the router you want to connect to.

• WiFi and apple tv does not connect for Colocation

  WiFi and apple tv does not connect for home sharing

  Please give more details about your configuration, the version of the Apple TV and software, home sharing server, etc. Others here know much more about it as I have, but they will need a clear description of the problem. You can also try to search for this site for home, sharing problems and take a look at any recent threads that you present to.

  You use the same Apple ID everywhere? ATV currently sems to have problems with Apple improved authentication protocols, so I hope they are not turned on for your Apple ID. You have enabled sharing House in configuration of the ATV?

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• iPhone 5s does not connect to internet unless its connected to wifi

  I have a 5 s IPhone it does not connect to internet unless I'm at home connected to wifi. I can not send imessages or browse the web what should I do?

  You did that mobile data is turned on in the settings/phone/cell data?

  Also, make sure that the apps you want to use for the cell data are enabled in the list below these settings.

• iPhone 6s does not connect to wifi

  my iPhone 6 s does not connect to the wifi at home.  He sees the network and accepts the password.  My other apple devices will connect.  I have renewed the lease, rest the network with no luck.  Any suggestions?

  Hello

  This link should help

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• Acer Tablet does not connect to WiFi

  original title: hellp

  I just bought an acer Tablet and it does not connect to WiFi

  Best result: since it's new, contact Acer, or else :-), read the instructions

  SC Tom

• WiFi does not connect to the home network

  IM currently problems with my wifi on my new z3 compact network.

  My compact z3 is able to find the wifi network & shows an excellent signal, I get the password to try to connect but just z3 keeps alternating between safe, secured with wpa/wpa2 & getting ip address...

  I tried to reset the router, phone that allowed me to use wifi, but a day later I'm back to the problem off z3 does not connect to wifi. All other devices connect without any problem at all.

  Any help would be appreciated & ty in advance.

  Do you know if there is no limit on the number of devices that you can connect to your ISP network and the internet? Also make sure that DHCP is enabled in your network and you do not have any MAC-filter in the network.
  Alternatively, you can try to manually specify an IP address that can be used in your network in the phone. Tap and hold the network, select Modify network, then check Show advanced options and set a static address.

• 7 tablet (1800) does not connect to Wifi with WPA2

  I have a HP 7 1800 tablet, I had connected to my wifi at home using WEP security.  Everything worked well.  But I have a new laptop and need to change the WPA2 security.  Now, the Tablet does not connect.  I have all my other devices works fine.

  Why this 7 Tablet not connect using WPA2?

  I solved my problem.

  For some reason any the the mac address has been removed from the ACL when the change to the wire for WPA2 setting.  Does that happen ever, I looked there until today.