Does not execute the action script

Similar Questions

• Left mouse click selects the button but does not execute the action of the button (for example close)

  HI - this seems to be a problem with Windows rather than the mouse, so any help would be greatly appreciated!

  First of all - I have a trackball M570. Works fine connected to another Windows 7 machine.

  But on a single machine including windows 7... I can use the left click for most, but in some applications, when I click a button it not actually click the button. Yes, he selects the button but it does not perform the button action. I also see the issue in the boxes, I can't put a tick in the boxes. Or at least I just figured someway by combining fast random space bar presses and presses mouse, but it is obviously not right. Couldn't find anything useful in google, so I thought I would try here in hope!

  Thank you for the pointers !

  Cheers, Jim.

  HI - Finally - I found a solution.

  First of all - the following solution worked for me, but there are possible solutions mentioned on the thread I linked in my previous email.

  The mouse is a Logitech wireless, with the SetPoint software installed. I also had a Microsoft wired keyboard and just in case that was the problem, I replaced it and - YES! All good new - in fact explains some other issues, I was less concerned. The problem with the keyboard was somehow screwing of the mouse.

  Since then I have been reduced to a media volume on the keyboard button, no idea how to solve this problem, and the replacement keyboard was free, so just get rid of the old. Note: I could use the old keyboard when I downloaded the Microsoft Mouse and keyboard Center, installed and disabled the offending button.

  Thank you, maybe my solution might help some people out there.

  Jim.

• Microsoft Jscript Runtime error - object does not support the action of line 12

  I get this error at startup on my laptop running Win 7. I have just respond ok and continue to work. How do I cure this?

  Hello

  Have you made changes on the computer before this problem?

  A runtime error is a software or hardware problem that prevents a program to function properly. Runtime errors could cause you to lose information in the file that you are using, causing errors in the file (corrupt the file) so that you cannot work with it, or prevent you from using a feature. Unlike stop errors, errors lead usually Windows or a program to stop working.

  See the following Microsoft article.

  What is a runtime error? http://Windows.Microsoft.com/en-in/Windows7/what-is-a-runtime-error

  I suggest you perform a clean boot and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve problems using the clean boot in Windows: http://support.microsoft.com/kb/929135

  Note: once the diagnosis has been made, make sure that you reset the computer as usual.

  Keep us updated on the status of the issue.

• Tip action: a conditional action does not execute the final decision

  Hello

  I'm working on a program of Captivate (7). We have a tip action that runs when entering the program or the first screen.

  The program transmits the data of Captivate to a database via Javascript to a .NET application.

  After each of us the registration form that the user saw the screen and assign it to a user variable: v_lastmod = 1, 2, etc. On the way to the next screen, it passes the data to the database via Javascript to a .NET application and .NET passes a redirect response. So it basically loads the program again. Entering the first screen where I have a display "Loading" (just a screen with loading as text), according to your v_lastmod, it climbs to a particular slide. The tip action uses "If" and "else", "if" v_lastmod = 1, jump to "4 slide 4" etc. ".

  We are able to do it for all the decisions that are in advanced actions, until we get to the lastmod = 19 (which is where we stop registration for this variable).

  So, say for example v_lastmod = 19, rather than jumping to the appropriate slide, it goes to the screen first and then stops on the second slide.

  Any thoughts would be appreciated!

  If all goes well, this didn't seem to be confused because I am not developer but program file Captivate .NET.

  Is there a quiz results slide your course?  Is the quiz results slide before slide 35?  In the "quiz properties: success or failure" attempts is in anything other than endless attempts? In "quiz: settings ' is mandatory or optional quiz?

  In order to go beyond the quiz results slide, some of the quiz properties must be defined properly to allow this.

• Library swf with does not perform the actions

  I have an actionScript animation film simple (using Greensock TweenMax) after export works fine when I open the .swf file obtained on its own (double click on my Mac finder).  My film has 2 frames, frame 1 sets up the interpolation on the object function in my film, frame 2 performs the function and stops.  As I said, if I open the exported .swf file or preview in a html browser, I see the desired animation effect.

  However, when I include the swf exported in another project file (using import to library) and drop it in my main script - I don't get the animation that I see in my standalone swf file.  I tried to call the file directly to play and notheing happens.  When I opened this symbol of swf (double clicking) after putting on the main timeline, I see 2 managers, but only in the original file symbiols graphics are in these frameworks (no action).

  I test the same goal using an exported swf of a film by the animation timeline (classic Tween), and it worked fine).

  What Miss me?  Is it possible to take advantage of a file to swf actionscript animation in other films?  I want to do so that I can create a bunch of stand alone animations I load in dynamically and play without chronology animate each one.  Any help GREATLY appreciated, thank you very much!

  Yes, if it's an AS3 file you can use the Loader class.

  If you want the movie to be physically in the other alternative file would be to copy the script of the film to a movieclip in the other file.

• VMWare Studio is stuck with the transitional VM does not complete the PostInstall script.

  Hello

  I ran into a situation where the Studio VM got stuck with the post-installation script control that went wrong. The failure is shown in the Studio hanging as shown below.

  Build-a-failed/hung:

  2009-11-30 10:57:29 more than 30 minutes are elapsed during the configuration of the virtual machine.

  2009-11-30 10:57:29 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 10:57:29 to complete, please check that the construction is progressing

  2009-11-30 10:57:29 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  2009-11-30 11:28:06 more than 30 minutes are elapsed during the configuration of the virtual machine.

  2009-11-30 11:28:06 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 11:28:06 to complete, please check that the construction is progressing

  2009-11-30 11:28:06 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  What's happened is that the transitional VM has restarted before the post-installation script came out. However, in the past, I had noticed that the VM Studio that recognizes and cleans. In this case, there no cleaning. A previous generation succeeded as shown below. My question is if there is any command the virtual machine of comments/provisional, which 'determine' the completion of the Post-Install, so the Virtual Studio machine can pick up and transfer/package the bits of the vmdk disk images and give me a successful build? I know that all the elements of post-installation script had been completed successfully.

  If the build was successful:

  2009-11-30 05:01:41 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 05:01:41 to complete, please check that the construction is progressing

  2009-11-30 05:01:41 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  2009-11-30 05:18:11 the transient VM is now in offline mode. Post-OS Setup log file recovery...

  2009-11-30 05:18:11 installation is complete.

  2009-11-30 05:18:11 post-OS installation error checking...

  2009-11-30 05:18:12 VM carrying host provisioning to Studio; This may take a few minutes...

  2009-11-30 05:53:15 provisioning host cleaning...

  2009-11-30 05:53:15 checking if provisioning session is still alive and the transient virtual machine is always on.

  2009-11-30 05:53:36 Unregistering transitional VM configuration host.

  2009-11-30 05:53:36 remove transitional VM configuration host.

  2009-11-30 05:53:38 the development of the virtual machine.

  2009-11-30 05:53:38 packaging of the virtual machine.

  In the normal flow, you shouldn't have to do something special for "cessation of distribution".  The VM output should be in/opt/vmware/www/build / < instance-bld > / export dir in the VM Studio when using Studio to build a W2K8 device without your installed application. The Studio build process is now out of the picture. You can then copy or import the virtual machine to your platform of choice virtualization, power, install your application, closing. And copy (or distribute) the VM whenever you want.

• I get an error, "the executable file that this service is configured to run does not implement the service" when I try to synchronize the time in Windows XP.

  After trying to fix the error of time synchronization by typing net start w32time that receipt of the message in the title.  In addition, type net stop w32time responded that the service was not working.

  Original title: the executable that this service is configured to run does not implement the service

  After checking the configuration in the registry and check or update if necessary from the link below:

  Then the time errors that I got from the command prompt window:
  Order--> net stop w32time & net start w32time
  Response--> The Windows Time service is not started.

  Order--> net start w32time
  Response--> system error 1083.
  The executable program that this service is configured to run in does not implement the service.

  --> Command w32tm/Resync /rediscover
  Response--> sending command to local computer resync...
  The following error occurred: the RPC server is unavailbale. (0x800706BA)

  Hi Mitchell_G,

  Thank you for keeping us posted.

  The steps of items offered in the previous post?

  We know if you need help. We will be happy to help you.

  Thank you.

• The installed product does not match the installation source (S). Until a matching source is provided or the installed product and source are synchronized... Cannot perform this action.

  Hello

  I'm not able to uninstall Skype on my laptop which is having windows 7 OS.
  It gives below error.
  The installed product does not match the installation source (S). Until a matching source is provided or the installed product and source are synchronized... Cannot perform this action.
  He appreciates if there is someone to support for this issue.
  Thank you
  Sandesh

  Hi Bader,

  Thanks for the kind reply. In fact before checking your response, I checked in my system there was the .msi from the Skype software installation file was missing. so I installed the same version installation file and then uninstalled the software.
  And I have installed the latest version of the Skype software.
  Thank you
  Sandesh

• GlassFish does not have the result of the action

  My glassfish does not have the result of the action, maybe the adfc-config not the welcome-file project, because from the moment where I redirect on a bean for the workflow, it starts to run the result, perhaps the answer to this problem either, like the adfc-config is the welcome file of the application.

  Remove the .jsf and try again

• CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  At the same time recording tool was not possible and if you install Adobe Scriptlistener plugin Adobe will disable the recording of the tool its never an option.

  I use and record the actions all the time and was looking forward to the registration tool when Adobe announced it.  But I found what they delivered was very limited because of the restrictions. I don't like that Adobe disables the registration on my machine tool.

  The amount of data that gets reorganized also seems to vary between machines.  I found that Action recorded on a fast machine are not usable on a slow machine.  Recorder fast machine too much data.

  You use this action on the documents must also have the same size and resolution as the document that you have saved the action on. Quite a restriction.

  You can also be foxed in 2014 CC sett here Photoshop CS6 - recording of the clone in an action tool works incorrect on replay.

• The script of the recordset does not define the function findServerBehaviors

  Errors frequent pop up. Firstly the premiera listed below. After I closed the alert, the second error appears.

  The script of the recordset does not set the findServerBehaviors function.

  The repeating region script does not set the findServerBehaviors function.

  Dreamweaver CS 6 Version 12.2 develop 6006

  Clear Cache corrupted in DW

  http://forums.Adobe.com/thread/494811

  Plan B, restore preferences

  http://helpx.Adobe.com/Dreamweaver/KB/restore-preferences-Dreamweaver-CS4-CS5.html

  Nancy O.

• ExtendScript: Could not perform the Action, because the destination folder does not exist

  "Adobe Photoshop (CS 6 on mac): use Extendscript (below) to convert in a .png .psd file size.

  "Save for web error: could not perform the Action, because the destination folder does not exist. Can anyone help?

  I am trying to convert the image size of a record of entry into an output folder:

  #target 'photoshop '.

  var outputWidth = 1024;

  var inputFolder = Folder.selectDialog ("input file");

  var outputFolder = Folder.selectDialog ("output folder");

  If (inputFolder! = null & & outputFolder! = null) {}

  var file = inputFolder.getFiles ("*.psd");

  for (var i = 0; i < files.length; i ++) {}

  var file = files [i];

  var doc = app.open (leader);

  If (doc.width > outputWidth) {}

  var height = (doc.height / doc.width) * outputWidth;

  doc.resizeImage (outputWidth + "px", size + "px");

  }

  var options = new ExportOptionsSaveForWeb();

  options.format = SaveDocumentType.PNG;

  Options. PNG8 = false;

  doc.exportDocument (outputFolder, ExportType.SAVEFORWEB, options);

  doc. Close (SaveOptions.DONOTSAVECHANGES);

  $.writeln('File ' + (i + 1) + "" + files.length + "transformed");

  }

  }

  I added a few comments, I hope this helps...

  #target "photoshop"
  var outputWidth = 1024;
  var inputFolder = Folder.selectDialog("Input folder");
  var outputFolder = Folder.selectDialog("Output folder");
  var startRulerUnits = preferences.rulerUnits;
  //make sure you are working with pixels
  preferences.rulerUnits = Units.PIXELS;
  if (inputFolder != null && outputFolder != null) {
      var files = inputFolder.getFiles("*.psd");
      for (var i = 0; i < files.length; i++) {
          var file = files[i];
          var doc = app.open(file);
          if (doc.width > outputWidth) {
              var height = (doc.height / doc.width) * outputWidth;
             /*  doc.resizeImage(outputWidth + "px", height + "px"); */
             //only one value is required
              doc.resizeImage(outputWidth, undefined, undefined, ResampleMethod.BICUBICSHARPER);
          }
          var options = new ExportOptionsSaveForWeb();
          options.format = SaveDocumentType.PNG;
          options.PNG8 = false;
          //get the filename without the extension
          var Name = app.activeDocument.name.replace(/\.[^\.]+$/, '');
          //build up the output file name and path
          var saveFile = File(outputFolder + "/" + Name + ".png");
          //you need to have a full filepath not a folder
          doc.exportDocument(/*outputFolder */saveFile, ExportType.SAVEFORWEB, options);
      doc.close(SaveOptions.DONOTSAVECHANGES);
          $.writeln('File ' + (i + 1) + ' of ' + files.length + ' processed');
      }
  //restore ruler units
  app.preferences.rulerUnits = startRulerUnits;
  }
  

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas

• Dreamweaver does not display the images of the root folder

  Dreamweaver does not display the pictures in the folder root in the browser:

  "< a href ="... /... /.. /.. / gen/index.php "> < img src ="... /... /.. ' / gv_logos/gen_logo.png "alt ="Gen"width ="130"height ="60"> < / a >

  "< a href ="... /... /.. /.. / english/mall/home.php "> < img src ="... /... /.. ' / gv_logos/gen_mall_logo.png "alt ="Mall"width ="110"height ="60"> < / a >

  I use Dreamweaver CS6. I checked display > display external file, it is checked. I unchecked it executed the script, still no change.

  I've been in the problem for weeks.

  It's driving me crazy. .

  Thank you all. I finally discovered what the problem was. My ' link to ' was created at the root of the Document.

  For later use, to all those who may have this problem:

  1. Launch Dreamweaver.
  2. Click on "Site" in the top menu.
  3. Select "Manage Sites".
  4. In the 'Manage the Sites' box, select your local site folder. For example, my_new_site
  5. Click on change icon (it's the second icon on the button "Import Site").
  6. The site for my_new_site configuration (for example) is displayed. Now click on "Advanced settings".
  7. Search "link to:" in the options, select 'Site Root '.
  8. Click on 'Save' later, the box disappears.
  9. Click on 'Done'... and you're done!

  You don't need to restart your computer for the settings save constantly. But if that fell safe, Dreamweaver shut down and restart it. All links should display correctly.

  But it is worth mentioning that all of the links in the following format will have to be edited:

  /.../.../main.php

  Just rewrite the link paths not all scripts.

• af: popuo closing by program does not update the caller

  Hi all
  
  I use jdeveloper 11g and adf business components.
  I have a simple page that displays a database table (a display object). On this table, I need to insert, update, delete operations.
  I sent the following link and was able to create the whole process.
  http://jamessmith73.WordPress.com/SOA-11g-page/ADF-11g-CRUD-operations-on-a-master-detail-table/
  
  For the update feature, I implemented an af popup element that opens the current record as a pop-up and it works fine.
  I should add validation by updating, so the button submit popup, I added my validation code and show the message, I added partialsubmit = true on the submit button.
  Now it shows postings, but even once it is validated, it remains on the pop up, does not close the window.
  To close the window, I added code to popup in my grain of closing.

        StringBuilder script = new StringBuilder();
        FacesContext context =  FacesContext.getCurrentInstance();
             script.append("var popup = AdfPage.PAGE.findComponent('").append("p1").append("'); ")            
                 .append("if (popup.isPopupVisible()) { ").append("popup.hide();}");
             ExtendedRenderKitService erks =
                         Service.getService(context.getRenderKit(), ExtendedRenderKitService.class);
             erks.addScript(context, script.toString());

  After this the pop up is closed but does not show the updated line (even if it's upadted in the comic book), it is the table of the appellant is not refreshed.
  The work around is that I add one more button soemthing like "save" which does not any action involves and just close the pop up and refreshes the page.
  But I don't want the user to have 2 buttons for a single operation, so would like to know if there is any other way to do this.
  In addition, lets say I make a few changes on the form of popup, but click Cancel, the table reflects the changes (no change is made in the comic book)

   <af:commandButton text="Cancel" id="cb8"/>

  To resolve this issue, I added an actionlisterner on the Cancel button that closes the pop-up window, so that the table is not updated with the modified values programmatically.
  But if I click the same link again that fills the popup, inputtext components displays the value that was changed before you click Cancel.
  I don't know how I should resolve this thing, I don't know I'm missing something.
  any help is appreciated.
  Thank you
  Ash

  Update the table in the code to java with addPartialTarget()?
  And if he does not rerun the query of the ViewObject, then refresh.