Does not recognize the disk in drive D

Similar Questions

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• Computer does not recognize the CD/DVD drive

  For these last days, my computer does not recognize the CD/DVD drive.  I have tried everything - publishers of registry, check the physical connections inside the computer, the system restore and install Fix - It programs.  However, the computer does not recognize this drive.  I also wonder if it is a hardware problem.  The light on the drive is a constant in green, and does not have the Open button.  And when I use the bent-paper-clip-in-the-little-hole and can open the drive, it will not read the disc.  Please advise...

  I fixed my problem with the BIOS operating system & not recognizing not not my DVD player to reinvest the solder on the motherboard.  You can find instructions on how to do it here: http://www.computerrepairtips.net/how-to-reflow-a-laptop-motherboard/

  There was a little crazy with my video drivers when I started first, but everything works after resetting the BIOS by default.

• Dell Inspiron 17R does not recognize the cd/dvd drive

  I have a laptop Dell Inspiron 17R and sometimes it does not recognize the cd/dvd drive!

  I tried to update the drivers with the system after the update, Dell detects the cd/dvd drive appeared in my computer and in Device Manager, but after 20 minutes, there was no. Any suggestions how to solve this problem?

  Thanks in advance!

  Hello

  See if that helps you.

  There is a "Fix - it" Microsoft for your problem on this link

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If above doesn't fix it, continue with the help of Microsoft:

  http://support.Microsoft.com/kb/982116/en-us

  See you soon.

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows 7 64 bit does not recognize the external hard drive.

  Windows 7 64 bit does not recognize the external hard drive.  I have an old 250 GB Western Digital external hard drive.  Neither of my windows 7 machines recognize it.  It does not show in the device, Manager of the computer Manager or Explorer.  Any help would be appreciated.  THX Mike

  Hello

  Initially, check if the hard drive is compatible with Windows 7.
  Check out the link - http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
  See the help article and check if it helps.
  
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
   
  Tips for solving problems with USB devices (this also applies to windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  It will be useful.

• Windows 7 64 bit does not recognize the USB external drive HARD Stor E art 3.5 "

  I buy the art external disk HARD Stor E 3.5 "and spend a few days in windows does not recognize the HARD drive. Try to connect the drive to other USB 2 ports and nothing happens. Use a USB to see if has been a problem with the USB ports, but all 3 are OK. Try it on the laptop Asus and windows 7 recognizes the HARD disk. I formatted the drive in NTFS FS. In managing records do not show the external HARD disk. What can I do to fix this?

  My laptop is a Qosmio F60

  This is a really silly situation. It can be recognized by other laptops but not your Qosmio.
  According to the description of your HARD drive when connected simply doesn t exist for your Qosmio laptop.

  Some other HDD is recognized correctly?
  What you can try is to reinstall the chipset driver, restart the laptop and test it again.

  Since when you have this problem? Some installed updates of the last days?

• Satellite A205: Vista & BIOS does not recognize the CD/DVD drive

  After a crash of the sudden family Vista system premium on a Toshiba Satellite A205 the system does not recognize the DVD CD - RW drive. Neither in Explorer, Device Manager, nor BIOS.

  Laptop is only a few months old.
  Have you tried the Toshiba check system - it ignores DVD disk check.
  Tried Windows Update - does not help.
  Tried registry fix - does not help.

  Cannot use the CD to reinstall all drivers - because it is not recognized.
  The DVD drive LED is on. If the disk looks ok physically.

  Does anyone have an idea what to do?

  Very strange what s
  Try this:

  Access the BIOS and set the default settings and save the changes.
  If it doesn't help then I put t see any other possibilities for contact ASP in your country for a CD/DVD drive control and possibly a replacement

  You said that the notebook is only several months old so I assume that the warranty is still valid and that's why everything has to be done for free

  Good luck my friend

• My Satellite phone does not recognize the external hard drive

  I recently bought a Toshiba Satellite with Windows 7 Home Premium 32 bit. I connected an external hard drive (brand is seagate) that still works on my previous laptop (Dell), but the system does not overlay the external hard drive. It does not recognize there is an 'external Hard Drive FreeAgent' but when the AutoPlay window appears & I choose "Open folder to view files" it gives me the following message is displayed:

  "G / is not accessible.
  Access is denied. "

  I called the manufacturer of the external hard drive (Seagate) & they told me that it is a windows problem.

  can someone help me? ... Thank you

  Can you please tell us which model of laptop you have exactly?
  Do you use an original preinstalled operating system?
  Are you using USB ports?
  Have you noticed the same problem using all available ports?

• Desk top HP does not recognize the external hard drive

  My HP Envy Phoenix 810 does not recognize my external hard drive Seagate 3 TB, which is installed in the drive enclosure hard Bytec HD-35SU3-BX. Have you tried two different 3 TB HD and two boxes of Bytec and nothing works.  When I installed my 1 TB in the same pregnant, it works.  Why my computer won't allow me to use my 3 TB HDDs?  I use Windows 7 and Internet Explorer 11.

  I suggest you directly contact Bytecc and inquire 3 TB HD the HD manufacturer is supported. I had an old AZIO dock who does not identify / initial with WD drives.  It was a firmware issue.

• Satellite A200-1TS - Win XP does not recognize the new HARD drive

  Dear Forum,

  My HD crashed, I installed a new, but XP will not recognize.
  I created a new partition with Partition wizard home edition, and with a Mini XP bootable CD I can access Hd, reading and writing, but if I try to install XP from the CD of origin of the system does not have a usable hard drive.
  Any part of the material blocking this new HD? How can I install windows XP on a hard disk new?

  Thanks in advance for your help

  Can you please tell us what model of laptop do you have?
  Maybe you need to load the SATA driver?

• My laptop does not recognize the cd/dvd drive, gives the error message 19 and cannot load/reload driver TSST. Any suggestions?

  Device Manager says: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).»  Mr. Fix - it (Microsoft) indicates the CD/DVGW TSSTcorp TS-L632M ATA Device drivers & filters are corrupted or damaged.  Mr. Fix - it could not download the updates/drivers for TSST.  Mr. Fix - it has been able to get the computer to recognize, but unable to take the function of CD/DVD.

  Hello

  Perform the following methods and check if it helps.

   

  Method 1:

  Please run the difficulty of following article and check if that helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

  Method 2:

  You can read the following article to see what might cause this problem.

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052/en-us

  If you had recently upgraded the computer to the Vista operating system or install the Service Packs, then try the steps as described in the following article.

   

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/  

  Hope this information is useful.

• Windows vista Manager or the device does not recognize the cd/dvd drive

  I have windows vista and it is not recognize my cd/dvd drive. When I click on my local drive (c :)) and recovery hp (d) shows up, I checked my device manager and nothing shows here either for my cd/dvd drive, so I checked the cable but it looks fine.) checked the files of the upper and lower register, but that fact so I just bought a dvd burner external made by polaroid that is USB2.0 and supposed to be plug-and-play, but when I connect it nothing happens nothing. the power turns on two cd players and the disc starts to spin but it stops after 15 seconds and I get nothing. I am confused and don't know what to try. Please help thanks. so I tried to use the running microsoft dvd set and the message I said 'dvd cd drive not detected '.

  I tried these steps with no luck

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hello mike salinas.

  1. you have any third-party burning software installed on your computer?

  2. have you checked if the external CD drive works on another computer?

  I suggest that you check if your internal CD-ROM drive is detected in the BIOS.

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer, but before I get to the BIOS to start Windows. Check to see if there is the CD/DVD drive in the BIOS.

  You can see the article for more information about the BIOS:

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Regarding the external CD/DVD drive, I suggest you see if it works on another computer.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Satellite C series does not recognize the CD/DVD drive

  Hello

  I have about a week he did something wrong and now my laptop recognize my CD-Rom drive.
  I guess I accidentally deleted the driver but I'm not sure of (I'm not a computer expert).
  What now? Someone has an idea?

  Thank you!

  Carina

  + The message was edited: translated by Google Translator.

  Hello

  I guess that you do not see the CD/DVD drive in MY computer area.
  Right?

  I think I can help you
  First go to Device Manager and search for CD/DVD drive.
  Select this device and delete it from the list.

  Now, open the registry (type regedit in the search) and remove the filters above and below to the following registry key:
  HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet\Control \Class \{4D36E965-E325-11CE-BFC1-08002BE10318}

  The similar solution is located on the Microsoft page:
  http://support.Microsoft.com/kb/314060

• Tecra 8000 does not recognize the new HARD drive

  I read on this forum and Google search, but nothing helped.

  I think the disk on Tecra 8000 (Pentium II, 266 Mhz) is "dead".
  I tried to replace it with another laptop to see if that would work.

  The laptop does not, even if I put just like the original.
  Y at - it somehow special or what I have to change something in the Bios?

  Hello

  Don t need to change BIOS settings

  As long as you use the compatible HARD disk, the BIOS should recognize the HARD drive automatically without big problems
  What drive did you use? What size, interface, etc.

  The Tecra 8000 is an oldie and I think that you could use only the 4 GB; 6 GB; 9 GB; 10 GB; 14GB IDE hard drives.

  More large hard disks would be not recognized by the BIOS.