Does the m - 105 palm with Windows 7 64-bit work?

Similar Questions

• Installation Failed for HP Laserjet 1200 Series in the new computer laptop with Windows 8, 64-bit

  Name of the product - HP Laserjet 1200 Series PCL 6 Driver

  Operating system: Windows 8 Home Edition, 64-bit

  Error message: cannot find the series 1200 on the network. To locate manually click ok...

  Changes Made - this is an installation on the new laptop, in Windows 8, 64-bit

  Description:

  1 installation of an existing network, consistedof a desk and two wireless laptops.

  2. the two portable computers have Windows 7, 64 bit. Above the named printer is accessed successfully for laptops.

  3 replaces one of cell phones with 8 64-bit Windows.

  4. the path of the 1200 series is: wireless printer to the router, router to the desktop via ethernet, from desktop to a printer via a cable.

  5. the configuration of the wireless printer is

  Name: HP Laserjet 1200 Series PCL 5

  Port: \\Central\HPLaserj

  Printer: HP Laserjet 1200 Series PCL 5

  Driver: HPMCPM25. GPD 5.8.2008

  Problem

  Impossible to re-create this path with Windows 8, 64-bit configuration.

  a. when I try to download a driver always end up with a file called UPD-pcl6 - x 64 - 5.6.0.14430

  This seems to be a universal PCL 6 printer driver, can successfully decompress the file and create a folder

  b. during installation, I can see the desktop ICON printer (name: \\central\HPLaserj); So far so good

  c. process is unable to locate a driver and ordered to locate manually.

  d. accessing the HP Universal Driver files fails because a driver is not found.

  e. caraa attempt enter fails because you can't enter address above (\\central\HPlaserj). Cannot enter HPLaserj for the address, which obviously does not work.

  f. when the installation showed a list of drivers, the only one that I found was a universal PCL 6, which is what I thought, I tried to download the original.

  This set up has worked successfully to Windows 7 64 bit. It seems that I need help much more expertise to guide me through this whole upward.

  Problem solved.

  This link gives a good overview of the solution

  http://www.sadjad.net/blog/2012/11/28/Windows-8-shared-printer-driver/

• Could not map the drive from external hard drive to the new computer laptop with windows 7-64 bit

  I just got a new laptop with windows 7-64 bit.  When I try to map a drive on my external hard drive, it tries to connect but then returns the message "the network path was not found" I even tried to use the ip address.  The external drive is turned on and I can be mapped to other computers in my house.  When I click on browse in the drive, network adapter, and then click the network folder window, I see that what's on my pc.

  Hi katnoir,

  Follow the steps described in the links:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-network-error-code-0x80070035-Windows/84791143-B70a-4EC2-B700-98df657fe45c

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-logon-unsuccessful-during-map-network/055d61a5-00d0-4798-9e98-66e6ba0726de

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/ErrorCode-0x80070035-the-network-path-cannot-be/d2debc9c-afbb-497c-A0D8-a3e4e0137061

• With the help of VISA with Windows 7 64-bit resource control

  Hello.

  My company has recently upgraded our laptops, and I now work on Windows 7 64 bit rather than Windows XP 32 - bit.  I reinstalled a bunch of basic LabVIEW 2009, hoping that the 64-bit Windows 7 operating system would be able to handle 32-bit LabVIEW 2009 without problems.  But trying to run our test system, the control of VISA resources does not work.

  We use it to get a list of the COM (RS232) ports on the computer.  But the list is now empty.  The only option that appears in the list, is the text "Refresh."  But nothing happens when I press it.  Is this a bug in LabVIEW?  I installed the latest patch that I found, so now I'm under LabVIEW v9.0f3 (32 bit).

  Many thanks for any help!

  LabVIEW SP1 has an x 64 native installer.  I'm running very well with drivers 64-bit on this disc.  I think that the later will have something to do with your problem.  See the com ports in MAX?

• The NB550D is compatible with windows 7 64 bit?

  Hello

  I install windows 7 64 bit on my NB550D but always in the properties of the computer--> system Type 32-bit operating system.

  Any ideas?

  How can we be sure that you have installed Win7 64 bit OS?

  I checked the Toshiba download page and your laptop is supported for Win7 32 bit only for don t use 64-bit because you will not find drivers, tools and utilities for it.

  Stay with 32 bit.

• Trying to find the Pavilion dm4-1165dx with Windows 7 64 bit

  While using my laptop it is stopped and tried to restart, but was unable to do so.  When I first turn on the HP splash screen will appear and then freeze.  If I turn it off and then turn on the HP splash screen appears and then the screen turns white with the exception of a cursor blinking in the upper left corner.  I can access the BIOS and run all the system diagnostics indicate no problems.  When I first bought the laptop I did a disc that I had to label as 'Windows 7 64-bit repair disc'.  At the start of this disc, it says that Windows is loading and I finally gave different recovery options, but so far none of them doesn't seem to work.  HP Recovery gives me the opportunity to use the Microsoft System Restore. It will tell the laptop has been restored successfully, but the results are the same, a frozen HP splash screen or the splash screen and then the curors flashing on a white screen.

  Hello

  Boot from your disk to repair again, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the repair disk and try to restart the laptop.

  Kind regards

  DP - K

• Reinstall the applications pre-loaded with Windows 7 64 bit upgrade

  I'm looking to upgrade my 32 bit to 64 bit on my HP Pavilion a6710t (which came with Vista 32-bit) OS.

  Because I'm changing from 32 bit to 64 bit I do a 'Custom' instead of 'Upgrade' installation installation so I I will lose programs installed, including pre-installed as Cyberlink DVD Suite software and reinstall it after the upgrade is done.

  Downloads for 64-bit for my look of machine to be upgraded already installed software to be compatible with 64-bit software installations and is not complete.

  Is it possible to re - install somehow? Like going somewhere on the recovery DVDs?

  Thank you!

  -Andrew Chang

  Yes, the pre-installed software installation routines are on your HP DVD recovery. Explore disk recovery DVD #1 and I think you will find a folder named "HP". In the "HP" folder should be a folder named 'Apps' and another named 'Drvr' or something similar. In these files should be most, if not all, of the included software.

  Alternatively, you can locate the same files in a folder named "SWsetup" on your c:\ drive, if you have not previously modified.

• Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem

  Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem?

  Hello

  Please see try to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope that helps!

  Kind regards

  Sheena

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• Xerox workcentre ss16 does not work with windows 7 64-bit version

  According to Microsoft the xerox workcentre pe16 works perfectly with windows 7 64-bit version (see link http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Xerox%20WorkCentre%20PE16%20All-in-One%20Printer&v=Xerox&uid=PE16&pf=1&pi=5&c=Printers%20%26%20Scanners&sc=Multifunction&os=64-bit)

  However, in reality, it doesn't work and I can't find a driver. what Miss me?

  THX.

  If use you Windows Update, it will install a printer driver, but the scanner does not work, Xerox has not yet developed a driver for Windows 7 for this printer/scanner. The latest driver is for Windows Vista since 2008. I hope they won't disappoint us and come up with some appropriate support of Windows 7. If anyone has a work around to install the scanner, I'm all ears.

• my trusty Palm 750 (at & t) used to synchronize with Windows 7, 64-bit.

  original title: Palm Treo 750 GSM Smartphone

  Looks like my trusty Palm 750 (at & t) used to synchronize with Windows 7, 64-bit.

  It is understandable and disappointing.

  Is there any kind of emulator-type of a solution to synchronize?

  I ask because I don't have a data plan and need the cable to maintain contacts and calendar on the terminal entrances.

  Thank you

  Mike

  Hello
  
  I suggest you contact your hotline and check if it helps.
  
  http://palmsupport.org/Palm-support
   
   

• Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Hello
  Welcome to the Microsoft answers site.
   
  By design, the game is not compatible with windows7.
   
  You can also check with the manufacturer of game for any version upgrade of this game, which could be compatible with windows7.

  Yes, if you have the dual operating system on your computer, you can play and record games on xp, start the computer in Xp and you can play the game.

  I also invite you to visit this link to learn more about running the old programs/games in xp or vista compatibility mode.

  Here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if you have any questions.

  Thank you and best regards,
  Azam - Microsoft technical support.

• I deleted all the games that come with Windows XP including Solitaire. How can I get that back?

  I deleted all the games that come with Windows XP including Solitaire.  How can I get that back?

  Hi andypily1,

  Welcome to the Microsoft Answers community.

  Try the steps one by one and check below.

  STEP 1:
  How do I add or remove games in Windows XP
  http://support.Microsoft.com/kb/307768
   
  
  STEP 2:
  In most cases if the games are deleted from the computer files will remain on the computer.

  I suggest that you are looking for game files in the system32 folder.

  Later, click on Start menu click on run and type c:\\windows\system32 in the following search of the window for the file of games like free cell. If you get the files in the system32 folder then copy the file to c:\\program files\start menu\ later in the game folder.

  STEP 3:
  If fails it above steps, try a system restore to the point when the game was available on the computer.
   
  See the link below to learn how to perform the system restore.

  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Do I need a firewall if I have installed the basics of microsoft with windows vista x 32 Security.

  Original title: am running Vista x 32

  Do I need a firewall if I have installed the basics of microsoft with windows vista x 32 Security. If I do how can I download the microsoft firewall?

  Your quick response would be appreciated
  Edwardini

  Windows Firewall is delivered with and is part of the Vista operating system.
  You already have it and, therefore, you do not need, or you, can download another Windows Firewall.

  Microsoft Security Essentials (MSE) will close your Windows Defender because MSE has its own advocate and performance 2 defenders in the same machine allows to create conflict, not to mention redundant.

• I have a piece of test equipment that is not compatible with Windows Vista 64 - bit edition. Is it possible to go back to the 32-bit version without having to re - install?

  The test equipment is a Site Master S820D used for the test of microwave signals.  It is not compatible with Windows Vista 64-bit, but is with Windows Vista 32 - bit.  Want to know if there is a way to get back to Windows Vista 32-bit, without having to buy a new operating system.  The program is called "Site Master Handheld Software Tools".

  Hello

  If you want to move from a 32-bit version of Windows to a 64 bit version of Windows Vista, or vice versa, you will need to back up your files, then select custom during installation of Windows Vista. Next, you need to restore your files and reinstall your programs

  Use the links below.

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions