Does vMotion allows to automatically shutdown (startup) hosts when a farm is not stressed (overloaded)?

Similar Questions

• CHKDSK runs automatically at startup to the top

  XP Pro SP3

  My computer has been running chkdsk automatically at startup for about two weeks. Not always, but often. Generally, it detects and corrects a problem in Phase 1 and nothing in the Phases 2 or 3. -What this means and what I can do about it?

  No, it's not a reason not to use a floppy drive if you have a floppy drive in your computer. The fact that the computer (or hard drive) is only 2 years old is irrelevant; equipment can fail at any time. And Yes, back up your data first. MS - MVP - Elephant Boy computers - don't panic!

• From virtual machine automatically at startup of the host

  Hello

  I'm trying to find how to start a virtual machine automatically at startup of the ESXi host.  I think I did in ESX 3.5, but have so far been unable to find a similar feature in ESXi.

  Is this possible in ESXi?

  Thank you!

  I do not use ESXi, but if you go to the Configuration of your ESXi host and then virtual Mahcine start/stop tab is a box of properties in the right corner?  If so, like ESX, this is where to put it

• Is VMware 4.1 - possible to do automatic VM on host migration when LUN is near full capacity

  Hi all

  We have VMware 4.1 - is possible to do automatic VM on host migration when LUN is near full capacity.

  Suppose I have configure if a logic unit number is nearly 85 percent of capacity, I can do a configuration that VM will be moved to another host without any manual intervention.

  Thank you

  Saurabh

  Welcome thr community - first question I have is how you configure your virtual disks - you're thick or thin provisioning - if you use thick Provisioning, the size of the virtual disk won't grow - if you use Thin Provisioning disks will develop as spaced is used in order to run in a situation where you run the risk of cluttering the VMFS datastore - this risk is the reason why best practice is not use Thin Provisioning for machines of production

  Now, to answer your question - first thing to keep in mind vmotion does not move when the virtual machine is stored it simply moves the execution instance of the virtual machine to an ESXi host to host anotherESXi. You take advantage of Storage vMotion - but in vSphere 4 storage vMotion is not automatic.

  With vSphere 5, that you would be able to use Stirage DRS and that will automatically pass the virtual machine as the disk fills up.

• Computer does not allow me to sign in my account and I have not changed my PWD.

  Computer does not allow me to sign in my account and I have not changed my PWD.

  You give enough information

  Read this info:

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• I am wanting to put something to have a starting the program windows automatically at startup

  I have Windows 7 on a laptop Dell Inspiron and I wonder, can I have where my windows automatically Media Player starts when I turn on my computer?

  Put a shortcut to an mp3 player or other media file (or a shortcut to a WMP playlist)

  C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup

  [this is the all users startup folder]

  You could also put in the following folder, but only if your startup takes you directly to a specific account;

  \AppData\Roaming\Microsoft\Windows\Start Menu\Programs\StartupyourusernameC:\Users\

  [this is the start-up folder for yourusername]

  - - - - - - - - - - -

  You probably know this bit already but just in case where:

  The default location for the WMP playlists

  \My Music\PlaylistsyourusernameC:\Users\

  If you set up a playlist in WMP, can go in this folder, right click on the file PlayListName.wpl & select Create a shortcut and then move this shortcut to the chosen above startup folder.

  You can edit the playlist in WMP then as much as you want - setting up you made of the works in the name of the playlist so as long as this does not help, then, the action will proceed as planned.

  - - - - - - - - -

  I don't know what your goal is, but if it is to have the PC wake up & play music as an alarm call, then you can do it in Task Scheduler instead if you wanted [which is what I do].  But this would require the PC to sleep rather than turned off and therefore requires to be already logged on to a user account.

• How can I stop Skype opens automatically at startup? MBPro, model

  I want to stop Skype opens automatically at startup upward.  I looked in preferences, I clicked on the icon to the sidebar, etc. Nothing works yet.

  A second starting point is: previous Word files and Excel automatically opens. I can't find anything in the system or application preferences to stop this.

  MBP, model 10.11

  Thank you.

  Click on the Apple icon on the users from left and from top - preferences system - and groups - click connection points - see what of that are listed and checked

  

  (1100)

• I would like an option that reads 'check at startup' on when windows 7 checks the automatic updates.

  I would like an option that reads 'check at startup' on when windows 7 checks the automatic updates. Some people still turn off their computers when you are not using it. And if they do not check to turn on, they will begin the navigation with an operating system up-to-date. This option exists? I have not found. Thank you

  If check you the Manager of tasks shortly after starting your computer (or restart), you will notice that automatic updates (WUAUCLT. (EXE) is "check-in" with the update servers!

  Update Windows FAQ
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Folder open automatically at startup

  My Dell desktop computer uses Windows XP with SP3. At startup, the "C:\Program Files" folder opens automatically for about two weeks. I could not, so far, to cancel this action. Almost all the files in this folder are files ".dll" of Real Networks, Inc. need help.

  1. check folder Options > view tab "Restore previous folder on Windows Login" is unchecked.

  2. in addition, after each connection, your profile is loaded in the registry and a number of programmes is launched for the key hkey_current_user\\software\\microsoft\\windows\\currentversion\\run. When Windows is unable to load a particular program, say, the path of the program no longer exists, he sometimes opens the folder C:\Program Files by default.

  To resolve, in a run window (Windows Logo key + R), type regedit, hit enter and go to the key above and check if each value is known to you. Then do the same thing to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run.

  Note, it is prudent to create a system before any restore point, just in case something goes wrong.

• I am running windows xp sp3, the volume icon disappears from the taskbar on each reboot or shutdown/startup.kindly, help any permanent solution known.

  Hello!
  I am running windows xp sp3, the volume icon disappears from the taskbar on each reboot or shutdown/startup.kindly, help with any permanent solution known.i should go to the control panel and to recover it again whenever I turn my on.kindly advice, someone machine me a solution permanently this problem.i want to stay always on the taskbar the volume icon.
  the honest answer is expected... Thank you!

  Hello

  Try this:

  Control Panel - device - sounds Manager - note manufacturer device name and info on the graduating model.
  Double click and get the date and version of the driver (if 06 are dates, you use the default windows driver). Now
  Click the DRIVER UPDATE (this can not find anything because MS is far behind the certification of drivers). Now LAW
  CLICK above and UNINSTALL - REBOOT - it will refresh the driver stack.

  Now, go to the manufacturer of the system and recover the last pilot audio/Hi-Fi as a fall.

  Download it - SAVE - go to where you put it - RIGHT CLICK top - RUN AS ADMIN - REBOOT

  Now do the same for the manufacturer of the device (the one that made the device - if you were using the default windows
  you might need to look in the Device Manager - his new driver).

  Often, you will need to run the sound card drivers several times to get the latest version installed and will appear in
  Manager - Sound. This is because they make back the drivers one at a time and then finally install the
  most recent. Look in the Device Manager to be sure that you have installed the version of the driver is the one showing, if not
  run the driver again (reset each time) until the shows a correct.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Rob - bicycle - Mark Twain said it is good.

• Windows Media Center will open automatically at startup

  Original title: Media center

  Windows Media Center opens automatically at startup.

  Hi Swayne,

  1. When did you start to question?

  You can check out the following link and try the steps suggested by Cody C.Microsoft Support, Moderator on Thursday, January 13, 2011 06:25 and check.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/ccf0d79a-4A01-45bb-BA06-2fbfa3131cbc

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The app ever to run automatically at startup

  Hi all

  I searched the forums and tried all the code to make my app run automatically at startup. Unfortunately, when I tested my code on the real device. The application never runs automatically when the departure of the unit (I tested by remove the battery and put it again).

  Please see my code below, I created 2 projects to test the operation. But they do not work.

  1 loop until app not at startup

  public class AutoStartTest extends UiApplication {
      public static void main(String[] args) {
          new AutoStartTest().enterEventDispatcher(); // GUI
      }
  
      AutoStartTest() {
          try {
              // check if still in startup
              ApplicationManager app = ApplicationManager.getApplicationManager();
              boolean keepGoing = true;
              while (keepGoing) {
                  if (app.inStartup()) {
                      Thread.sleep(1000);
                  } else {
                      keepGoing = false;
                  }
              }
  
              // Push a new GUI screen.
              DummyScreen screen = new DummyScreen();
              pushScreen(screen);
          } catch (Exception e) {
              e.printStackTrace();
          }
      }
  
      // Simple GUI screen from which to create an Invocation.
      final class DummyScreen extends MainScreen {
          DummyScreen() {
              setTitle(new LabelField("Autostart test 2", Field.FIELD_HCENTER));
          }
      }
  

  2. use the listener of system

  public class AutoStartTest extends UiApplication implements SystemListener {
  
      public static void main(String[] args) {
  
          AutoStartTest appInstance = new AutoStartTest();
  
          // If system startup is still in progress when this
          // application is run.
          if (ApplicationManager.getApplicationManager().inStartup()) {
              appInstance.addSystemListener(appInstance);
          } else {
              appInstance.doStartupWorkLater();
          }
          appInstance.enterEventDispatcher();
      }
  
      // constructs
      AutoStartTest() {
  
      }
  
      private void doStartupWorkLater() {
  
          invokeLater(new Runnable() {
              public void run() {
                  doStartupWork();
              }
          });
      }
  
      private void doStartupWork() {
          // Push a new GUI screen.
          DummyScreen screen = new DummyScreen();
          pushScreen(screen);
      }
  
      //
      // SystemListener
      //
  
      /** @see SystemListener#powerUp() */
      public void powerUp() {
          removeSystemListener(this);
          doStartupWorkLater();
      }
  
      final class DummyScreen extends MainScreen {
          DummyScreen() {
              setTitle(new LabelField("Autorstarttest 3 ", Field.FIELD_HCENTER));
  
          }
      }
  

  It's the setting in

  I also joined the project as an attachment. But in the project, I tried to create a thread to send http get and open a session on the server side. But it seemed that the app has not started too.

  Visit this link
  http://StackOverflow.com/questions/11321653/BlackBerry-global-popup

• VPN for PIX 515 allowing access to a single host

  I have already setup on my PIX 515 a VPN connection, which allows the user to connect to our network via a cisco VPN client to access network resources.

  I want to configure now is an another VPN connection that external users can use but would only allow access to a host.

  E.g. I would like to VPN in my site but would be allowed to access the 10.1.1.1 on my network.

  How can I do this? What I have to install VPNGROUP another and somehow an access list to allow only traffic to a host of configuration. Can anyone help with the correct syntax for the PIX.

  Thank you

  Scott

  You will now have a bunch of commands "vpngroup" in your PIX, simply go into config mode and add more commands 'vpngroup' but with a different groupname. The VPN client then uses this group name to connect to the PIX.

  Another way to allow only access to a host for this PIX is to split tunnelling on this group, as well as in the tunnel of split ACL set only as a host.

• How to stop programs that run automatically at startup?

  Hi I just wanted to know how to stop programs from running automatically at startup, I already ran msconfig and disabled programs that I don't want to run at startup and it always automatically start also on msconfig, it indicates the applications that I don't want to run at startup is disabled and it always runs at startup. The programs that I don't want to run at startup are tom tom home and bbc iplayer desktop, but he always runs at startup.

  One other thing is when I install new programs, that they automatically run at startup without my permission.

  Palcouk did preferred proposals. Another way to identify which loads when you start using Autoruns (freeware from Microsoft).
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  A useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• My Windows startup programs not to load automatically at startup

  I'm currently under Windows 7 Ultimate 64 bit on Lenovo Y480N-ISE.

  A month ago, for some unknown reason, none of my programs that starts automatically start would be start automatically at startup.
  When I turn on my computer, nothing except for the programs in the system runs automatically. Not even my anti-virus programs! I had to click on them manually every time you start.
  I scanned my entire disk for malware with Microsoft Security Essentials, avast, spybot-search and destroy, Kit emergency emsisoft, sophos virus removal tool. There is not a single trace of malware or viruses.
  My current security measures include emsisoft online armor (firewall), avast antivirus and mamutu blocker based on behavior.
  I also checked msconfig.exe and everything seemed normal.
  I searched on Google and microsoft for answers, but none of them works.
  Please help me, thank you!
  (I am willing to provide more information, if necessary, just leave a message or send me an email to * address email is removed from the privacy *)

  Running multiple applications AV/Malware can result in none of them work properly.

  I uninstall this blocker & firewall then test again