I am wanting to put something to have a starting the program windows automatically at startup

Similar Questions

• do I always have to start the program as adminmistrator

  I am the administrator, but I must have the shortcut on the desktop to access the program

  Hello

  1. what application you are trying to open?
  2. what happens when you try to open the application?
  3. have you made changes on the computer recently?

  I suggest you run this application as an administrator and check if it helps.

  How to apply once with a full administrator access token? : http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token
  Note: It is applicable to Windows Vista as well.

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• Is it possible to put a password that would prevent the program turn accidentally closed?

  We have a person in our laboratory which is spirit very scatter. Several times he wanted to reduce Labview program running, but doesn't actually not paid attention and accidentally closed it by clicking X instead of _, thus negating the whole experience. When the program was closed he didn't ask if he wanted to save or if he didn't know that he wanted to close it. Is it possible to put a password that would prevent the program turn accidentally closed?

  You have two options.

  1. You can hide the X in total in the properties of VI.  Go to the appearance of the window, click Customize, and then uncheck the option to allow the user to close the window.  You would need another method, for example a file-> Quit or exit option button.
  2. If you use a version higher than the Base, you can use a structure of the event to capture the narrow window? event.  This will allow you to ask the user to confirm to get out and do something else required.  If the user cancels, or you need to cancel, you have the abaility to cancel the event.

• If I use the wizard to transfer settings and files on Windows XP, it will keep my Microsoft Office 2007 activation activation, or will I have to reactivate the program?

  I just need to restore my default settings to get my games that I LOVE to play the work; It is a windows registry problem, I think. I have my last installation of my program installed now, and I don't want to have to buy the program again to re - install (Office 07). If I use the wizard, it will keep on, or will I need a new drive to re - install?

  If you reinstall to factory settings, you will need to reinstall all the programs you have installed.
  You will lose all data
  You must run MSUpdate before installing Office
  You can re install Office as often as you want if its on the same PC, the worst way, you will have to use an online activation, and if it's a retail edition, you can install on any PC you own whenever you exceed the number of work PC allowed by your license.
  It is not recommended to use QUICKLY to desktop settings
  (I assume you have the cd/dvd as well as its key office)

  Finally, what makes you think that it is a registry problem?

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

• I use xport 360 and I can't put my save game back on the program profile it shows a circle with a cross please help me

  I use xport 360 and I can't put my save game back on the program profile it shows a circle with a cross please help me

  Hello

  If you try to recover the gamer tag, then I suggest you follow the steps from the link below: http://support.xbox.com/en-us/pages/xbox-live/how-to/xbox-live-account-management/gamer-profile.aspx

  If this does not work then I recommend you to ask your question here: http://forums.xbox.com/xbox_forums/xbox_support/default.aspx

  Hope this information is useful.

• Need help message' w/error Unable to start the s window media Interface. Make sure you have at least WMP10. »

  I downloaded WMP11 to download another program and I get this message ("unable to start the s window media Interface. Make sure you have at least WMP10. »).  This message appears when I click on the new program and it loads.  As soon as it loads the first program screen appears and displays this error message on WMP 10.  When I click ok it goes, but I can't get the new program to do anything.

  So before asking on the problem of new program, I would like to fix this so it keeps popping up.
  I'm not too calculates saavy so I need clarification.

  Thank you

  Where did you downloaded WMP 11?

  Uninstall WMP 11 and check again the issue. If it stops then reinstall WMP 11.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

• FSS.dat has stopped working and I have to close the program

  I get a message that fss.dat has stopped working and I have to close the program by the message box, this happens quite often how to solve this problem

  Maybe this post help

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-message-fssdat-program-is-not-working-and/eadcf204-22d9-4DB9-9660-a8720d1b9211

• I have already uninstall the program but does not control panal icon

  I have already uninstall the program but does not control panal icon

  Hello

  Thanks for posting the request in the Microsoft community!
  Before troubleshooting, provide us with information.

  1 are. what program you referring?
  2. you receive an error message on the computer?

  You can try the solutions and check if the icons are removed from the control panel.

  Method 1:

  Run the fix it and check.
  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Method 2:
  This could also be a problem with the virus. You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 3:

  If the previous step fails, check if it has all the facilities waiting on the computer using the registry.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Empty registry key "InProgress".

  Check the following registry key:

  HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Empty/rename "PendingFileRenameOperations" registry key

  Check the following registry key:

  HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

  Just reply with the results. I'd be happy to help you more

• I have age of empires 3 and I can not start the program.

  Hello

  I have age of empires 3 and I can not start the program.
  The program is installed, but once the autorun.exe appears (with the icons of the game, uninstall, website, out) I click on play and the game does not just start. My computing needs are fairly good for the game because I used to play the game on the same computer later.

  Thanks for your help

  David

  Bink is what plays the scenes cut in many games.

  Installation folder of AOE 3 the binkw32.dll should be in games.
  If it is then it is may be damaged and reinstall the game normally would set the
  problem.

  AutoPatcher.exe - I do not know because I never use auto-patchers with games.
  I have always to download the patch and install manually.
  However, my game has the RockallDLL.dll file.

  I don't really know a good site to lead you to these files.
  You can find a binkw32.dll in another game. Try doing a search of
  Program Files (x 86) (or another location if you install games to the default locations). If you have the file in another game you can copy into your AOE3
  folder of the master installation.

  There was a lot of discussion on these forums about AOE3 so a
  search of these forums may find another suggestion.
  You can also try the specific AOE3 forums-

  Age of Empires Forums - Forums

  Age of Empires III heaven Forum

  .

• Photoshop CS2 began to have questions about the other windows.

  About 2 months ago, I started to notice that Photoshop CS2 has started to have problems with me open or do it before all other windows, such as Explorer or Chrome for example. This is what my PS normally looks like:

  and if I try to bring another program, it will act as if I clicked on the start bar and the PS is more picked up (you have to click the program again to interact with him)

  Then when I go to color/clear/do almost anything on the Web, my tools will vanish like this:

  and reappear when I click on the gray background of the PS window. They may not be disabled.

  Sometimes, and I don't have a screenshot because I can't reproduce right now, the new program (Chrome, Explorer, etc.) is displayed, but the windows tools will remain.

  I dealt with it for a while, but I would like to first of all streaming my art and I won't continue to happen. I like to use CS2, so please don't recommend just other programs unless it is just absolutely not repairable.

  I ran CS2 on this computer since September of the year last with zero problems, so I don't know why it started

  Thank you, I'll check the wire, but I tried to reset my default preferences, and that seems to have fixed.

• I have a Mac and LR 6.5.1 installet. Tonight I downloaded the trial version for the LR CC photographer. But whenever I try to start the program it start LR 6.5.1 and not the CC version

  I have a Mac with LR 6.5.1 installet.

  Tonight I downloaded the trial version for the LR CC photographer. But whenever I try to start the program it start LR 6.5.1 and not the CC version.

  I was told that I could have the two program installed on my computer

  JEG h fået lagt problemet. Det er ikke possible in LR CC test nar jeg har en LR 6.5.1 installeret. :-)

• How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  dannyb76251437 wrote:

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  Note that you can work with two screens and drag and drop the image to display on the other window.

  I think you mean working temporarily with the window enlarged image without displaying all the tools and panels.

  See:

  Panels and bins in Photoshop Elements

  My advice: take the time to read the above help and especially to look at ways to maximize this window if you are on Mac or Win.

  Set your preferences in the Edit menu to "allow the floating windows in expert mode.

  Use the "tab" on the keyboard key to hide or show your panels and tools quickly.

  Find out how to hide the photo tray.

• My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  Hello

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time.

  For deactivation refer:- https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  If you do not have access to your old computer because you have replaced a hard drive, upgraded your operating system to format your computer before you deactivate your software or your computer is dead, you can ask Adobe Support to help you disable from a machine, you cannot access. Have your serial number or Adobe ID ready, then contact us.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

  You can also see: -.

  https://helpx.Adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html