Doesn't have a vista update

Similar Questions

• security of dec 24 2009 updated for Windows vista (kb958690) failed. and the security update for windows vista December 24 2009 (kb960225) failed, (kb9772), December 24 2009 doesn't have all three update failed. I want to know a solution to these problems

  I tried three times to updaed with no sloution. I also need updated my browsers to internet explorer 8 with space for 32 bytes. need soultion to this problem too.

  loveforsasha,
  We need more detailed information.
  What version of level pack Windows\service are you?
  What is the error code that you found these updates?
  Other updates have been installed?

  Here is some information, you can begin.
  Solve Windows Update installation issues
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• kb96137 doesn't have a Windows Update

  I am running windows vista and I install updates and then restart the computer that he told me that the update has failed every time. I don't get an error code or anything, and from what I see, this is an important update. What should I do?

  Hello

  This isn't the a correct Ko you left out a number, it is KB961371?

  If so download and install it here:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=c67d85c4-25c5-4821-8db9-91764888f893&displaylang=en
  Rob - bicycle - Mark Twain said it is good.

• Satellite U400 - doesn't have a Bios update procedure

  Hey guys,.

  I need help!
  I was updating my laptop works Bios and I had the power cord plugged in (no battery, he was at home).
  In any case, we had a power outage in the heart when I was doing the set date.

  Now, when the computer starts all the lights come on and there is no display, then a long beep.

  Can any ideas on how I fix?
  It is still under warenty

  Thank you
  Michael

  Hello

  Unfortunately buddy; There are not a lot to do.
  It seems that the BIOS update procedure has failed because of the failure and the module ROM was flashed properly.
  I hope that the motherboard isn't too bad.

  In your case it s is strongly recommended to contact the local ASP.
  Guys should be able to help you
  I'm not very well if you need a new motherboard or just a new update of the module m ROM
  But the ASP technician needs to know what needs to be done

  Good luck & welcome
  Jaba

• brick x120e - doesn't have a BIOS update

  Hello

  I tried to update the BIOS of my x120e (0596-2RU) of Windows 7, it got stuck (no progress for more than half an hour), now the laptop is brick (the screen does not light; there is no beeps, just the fan is activated).

  I think I followed all the instructions (fully charged battery etc.), but here in Ireland, said customer service failures updated BIOS are not covered by the warranty (unlike what say some people on these forums).

  What are my options now?

  Thank you very much!

  rufus82, welcome to the forum,

  I would suggest that you contact support again and again ask a fix under warranty so once you get no satisfaction, you should simply state that you are not satisfied and wish to register a complaint, the CSR will be able to do it for you.

  Please be sure to note the name of the CSR you speak and also request a call number, the phone number might be useful at a later date.

• EA4500 doesn't have a firmware update?

  Due to a new internet connection and router free (Fritzbox... very decent) my new ISP, I got the idea to stop using us as a bridge on the floor of the seconds of my house and the EA4500 as my main router. I connected it connected to my PC and I saw there was a possible upgrade for the firmware... might as well.

  By clicking on the button upgrade was not really successful, there is a status bar not go/improvement for about 5 minutes, so I dropped that one. Downloaded the right file here: http://www.linksys.com/us/support-article?articleNum=148385 and downloaded one manually, improved status bar and I got the message the router has been reset. Sweet, I thought... but alas the router has not been handed over in line and the port light keeps blinking. Waited for about half an hour before trying to remedy.

  Tried so far:

  1 soft reset

  2. hard reset

  3. power off, wait a few minutes, hard reset again

  After the above, still only a flashing light to port. Any ideas?

  Noted. For now, please follow instructions on this linkworkarounds. If all else fails, send us an email to [email protected]; Please indicate your contact details and the link to this topic.

• VISTA UPDATE LOOP

  I also have the vista update loop just like everybody... how frustrating on mine, is that I don't have a CD/dvd drive to put the cd... and other fixes do not work. These are the only options in the startup options and none of them works

  http://I52.Photobucket.com/albums/G33/rakcs/DSC00003.jpg

  so I thought to install XP via USB stick bootable. but I can't make it work. not even sure if I can install xp without vista im cleaning.
  I also thought that the delivery of the missing update through bootable usb... but I'm not sure if this is possible... someone has it already tried? anyone with the same situation as mine? pls help... Thank you...

  You copy the image of the ISO file on the disk, Boot from the disk you...

  If the Bios of your laptop can't boot from USB: NO, you can not start him.

  You only know if your Bios/motherboard supports the boot from USB, or not.

  Now, you went beyond the scope of these Vista Help Forums.

  Now, you also have a hardware problem.

  Most portable computers have a DVD player; especially if they have Vista preinstalled.

  I suggest that you get your repaired/replaced DVD drive, or check the manual of your laptop to see if your card motherboard/Bios support boot from USB.

  When you sort this possibility, try a repair of the boot with the link "ISO file/make a disc of ' I you provided.

  If this does not work, reinstall Vista.

  http://compreviews.about.com/od/support/p/Averatec.htm

  Averatec contact what to do about starting from the repair disks.

  Good luck with it.

  See you soon. Mick Murphy - Microsoft partner

• Doesn't have installation of Vista updates. He continues to try set up the third update with 0% completion and then it turns off and start again from the beginning. Keep in the loop... Help! There is no error message.

  As above. He is not in windows more simply the third update installation and then turns off computer and restart new since the beginning. Tried running safe mode but without success

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:
  

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to install Vista 64-bit SP2 as it says file doesn't have a digital signature?

  Hi have tried to download this several times but it goes on to say that the file doesn't have a valid digital signature, whereby it seems weird as its on the microsoft Web site.  Windows Update doesn't have the option to install from there, I had to do it this way.

  Can anyone help/advise

  Thank you

  Hi MattD5967,

  1. you install a manual download?

  Try to reset Windows Update components and check if this solves the problem.
   
  How to reset the Windows Update components?
  http://support.Microsoft.com/default.aspx/KB/971058

  If the suggestion provided above does not resolve the problem then I suggest you to install the updates using the cleanboot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) doesn't have a code 652

  A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) doesn't have a code 652

  How can I fix this error

  Hi Spiritwalker8,

  Follow the steps below:

   

  Method 1: Offline installation

  Download and save the Setup on your desktop package and try to install the same.

  Download the update from the link below:

   

  Update of security for MSXML 4.0 Service Pack 2 (KB954430)

   

  Method 2:

   

  Try to install the update in a clean boot state and see the update installs successfully.

  For instructions, see the following article:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

   

  Reset the Windows Update components and try to install the update:

   

  How to reset the Windows Update components?

• By updating my IPad IOS 9.3 Air, the following message appears: "unable to verify the update.  9.3 IOS doesn't have a verification because you are no longer connected to the Internet.  New attempt remind Me later

  By updating my IPad IOS 9.3 Air, the following message appears: "unable to verify the update.  9.3 IOS doesn't have a verification because you are no longer connected to the Internet.  New attempt remind Me later. " See the image below.

  Note that while I am able to get the email, do some research on the Internet, etc., that the update itself seems to be the culprit the disconnection of Internet while performing the check.  I closed all applications and even rebooted the IPad and then tried to run the update, but still get the same message.  Any other suggestions?

  Thank you in advance for your help!

  

  I'm having this problem too.

• Vista update and we now have a black wallpaper - Satellite P300

  Windows Vista update last night on our P300 laptop and is now rather weird.

  We get only a black background solid and a lot of the icons that we had are gone, and it will not change the wallpaper. Most of the programs are not loading at startup as usual (only anti virus) and most of the things are missing from the start menu... it happened to anyone before? It sounds almost to what they do when you have a pirate copy of Vista (and of course this one IS legitimate as it came with the lappy)...

  Any suggestings?

  I did not physically see the laptop and won't til tomorrow myself... Although my companion knowing its probably just something simple but thought check here around before that snack.

  Thanks :)

  Solved the problem...

  A windows update some how corrupted the registry.

  I hit log off in windows and then tried clicking on the user name to connect (we just auto journal in value) and when trying to load the profile, we had a service user profile Service has no logon.

  A system restore fixed the issue... :)

• How can I get pages for free if I already have the last update and it doesn't show up on my macbook air?

  How can I get pages for free if I already have the last update and it doesn't show up on my macbook air?

  What to do if you already have?

  Peter

• I have 6 security updates. But get error 80243004. Vista

  Vista have 6 security update will not be installed.  get a 80243004 error.

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• I have windows vista sp2. Windows cannot check the updates. error 80070490 KB968389. last updated on this error 23/10/09

  Windows cannot check the updates. Error 80070490 failed since 10/23/09. Windows Update will not work.  I haves Windows Vista Home Premium SP2

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services