doesn't load service pack 3 Media windows and Retore xp on a full destructive ed

Similar Questions

• Windows error system32\rtkrnlpa.exe. loading service pack 3 for windows xp

  I get a windows/system32/rtkrnlpa.exe is open, or inuse by another application when I try to download service pack 3 on windows xp?

  help please

  Hello

  1. have you connected external devices other than the keyboard and mouse?

  2. what security software is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Disable temporarily the security software and then try to load Service pack 3 and check if the problem persists.

  Follow the steps to temporarily disable the security software:

  a. right click on icon antivirus on the left corner of the taskbar.

  b. click Exit or settings and temporarily disable the security software.

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Put the computer in a clean boot state, and then try to load Service Pack 3 and check if it works.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: once you have completed troubleshooting try the steps to configure Windows to use a Normal startup state.

  See also the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Hope the information is useful.

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• where can I get the service pack 1 for windows Vista Home Basic. My media windows palyer will not play DVD with it. I can not get a decoder installed without the service pack. Please help__

  Where can I obtain service pack 1 for windows Vista Home Basic

  Where can I obtain service pack 1 for windows Vista Home Basic

  Hey electric7422

  Click Start then right click on computer

  then left click on properties

  It will tell you if you have a 32-bit version or 64-bit vista

  links below have downloads the standalone vista service Pack 1 for each bit version

  the 32-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  the 64-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Walter, the time zone traveller

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• The elusive Service Pack 2 for Windows XP download

  Fortunately, I have the Service Pack 2 Setup file currently hard - to get on my hard drive. Here is some important information for those who need:

  Name: WindowsXP-KB835935-SP2 - ENU.exe
  Size: 266 MB (278,927,592 bytes)
  File version: 5.5.1005.0 (SRV03_QFE.031113 - 0918)
  MD5 hash: 59a98f181fe383907e520a391d75b5a7
  SHA1 hash: 33a8fef60d48ae1f2c4feea27111af5ceca3c4f6
  As most people know, it is the USUAL site where you can download this file:
  Windows XP Service Pack 2 network installation Package for IT professionals and developers
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28
  This page Google cache:
  http://WEBCACHE.googleusercontent.com/search?q=cache:BmAe2N4FViUJ:www.Microsoft.com/en-US/Download/details.aspx%3Fid%3D28+XP+SP2&CD=1&hl=en&CT=clnk&GL=us
  This page is now down. :-(
  When you try to load this page, that's what you will get:
  

  We're sorry, the requested page is not found.

  The URL may be misspelled or the page you are looking for is no longer available
  However, the file exists. A Google search will find useful hits, including this one:
  http://www.download3k.com/install-Microsoft-Windows-XP-Service-Pack-2-network-installation-package.html
  By all means, search for viruses and other malware to be sure!
  And also use this program to verify the hash values, so that you know that you are getting authentic:
  SlavaSoft HashCalc
  http://www.SlavaSoft.com/HashCalc/
  Again, the hash values are:
  MD5: 59a98f181fe383907e520a391d75b5a7

  SHA1: 33a8fef60d48ae1f2c4feea27111af5ceca3c4f6

  Hello

  Windows XP service pack 2 is not available on the Microsoft Web site. so I suggest you to install service pack 3 for Windows XP on the computer.

  How to get Windows XP Service Pack 3 (SP3): http://support.microsoft.com/kb/322389

  Hope this information is useful.

• Problem loading Service Pack 3

  I am trying to load TurboTax Deluxe and he couldn't because I wasn't using Service Pack 3.  When I tried to download SP3, I got a message "MICROSOFT WORD 2002 the feature you are trying to use is on a CD-ROM or other removable disk that is is not available" and I do not have this disc.  What can I do?

  Through these two articles:

  • Steps to take before you install Windows XP Service Pack 3

  • Windows XP SP3 - read all the prerequisites for a successful installation

  What offers Shenan Stanley is...

  1. Go to this web page: How to reset the Windows Update components? and use the Fix It utility in aggressive mode.

  2. Reset.

  3. Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.

  4. Reset.

  5. Double-click the installation file downloaded in step 3 and follow the instructions.

  UTC/GMT is 17:22 Tuesday, February 21, 2012

• I am running Windows XP Home Edition Service Pack 3 (build) 2600 and have a lot of problems.

  Hi all

  I am running Windows XP Home Edition Service Pack 3 (build) 2600 and have loads and loads of problems. Windows keeps hung and everything I tried didn't seem to help.
  I brought this second hand from a company computer, I used to work and I don't have the original installation cd or rescue disk. I meet a lot of problems and everything takes forever to load and work. I was advised to run maleware, spyware, antivirus and defrag on the computer analyses and I did all that and nothing works. Also, when I tried to run the system restore it wouldn't let me, and when I try to run the scan disk after a reboot it does not work. As a last effort, I tried running SFC and it looked as if it was working, but then it asked me for the initial startup disk, that I don't have. so I tried to cancel it, but now every time that I reboot/restart my computer load SFC and I have to start the entire process. Also, none of my cd drives work. Please help me
  Also, I'm now a message that says minimum virtual memory is very low.
  I would be very grateful for any help or advice anyone can offer us on these issues. a million thanks in advance.
  bfchild

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. what exactly happens when you try to run the scan disk or system restore? You receive an error message? If yes then after return the exact error message.

  No software XP, Microsoft no longer offers that you will need to make arrangements for windows XP windows installation CD. You can check the question in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  See also the following articles that may be useful.
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

• Is XP service pack4, compatible with 2002 service Pack 3 XP windowas?

  Cannot install the update for service pack #4 with [windows XP, service pack #3 2002] does not load!

  Compatibility after numerious attempts question assumes that its use is primarily for Windows 7; need a help!

  Assuming that you are referring to SQL Server 2005 Service Pack 4 (SP4), try to post in this forum for appropriate assistance: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads

• After you install service pack 2 for windows vista

  After installing service pack 2 for windows vista on my HP laptop, I started having a few problems. First off the computer would not go beyond the Welcome screen because he showed that an update was the installation (step 1 of 3:0 % etc.) and the computer reboots before finish. It kept the case whenever I started upward, even on safe mode. I tried to restore, but it would never be completed and nothing else would work. Now I can't go beyond the microsoft loading screen because it shows a black flat screen with no cursor. I can't enter safe mode. Help, please. Safe mode only shows the start screen but won't start so I can't access the control panel and tried to boot to the last known successful startup but it failed.

  Hello

  Try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• Is there a problem with the slice of Service Pack 2 for Windows Vista?

  I had to reinstall Windows Vista Unlimited twice already.  This is because the installation of Service Pack 2 for Windows Vista.  I had everything, including Internet Explorer 8 is installed during the installation of the Service Pack 2 has crashed my computer, and I had to re - install.

  Hello

  Please read: information about Service Pack 2 for Windows Vista and Windows Server 2008
  Includes installation tips and Microsoft Support.

  Also Please read: "How TO solve IE8 installation problems"
  Includes installation tips and Microsoft Support.

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Problems after installation of Service Pack 3 for Windows xp?

  After you install service pack 3, he started down, then when he tried to start it, nothing, that would make the windows logo then a blue screen. I tried to do a system restore, nothing, I tried to move the date of return in the bio, still nothing, I was payin 120.00 for someone to sit in front of my computer for 3 hours and IT couldn't work, but he ended up doing a full system restore, fortunately, I still have my photos and music but now his works more slowly. He guard tells me to download the package, tried again and poof, done the SAME thing again, this time I did the full restore again and now I'm not even download package. Y at - it something I can do or download for my computer as if it was. I did Defrag, I did the cleaning disc, cookies.etc... I clean up all this. I'm afraid to download updates due to what happened before... Help!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it! [1]

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the deletion appropriate before installing any Windows Service Packs or IE updates and before installing your new anti-virus application (which will require to install WinXP SP3).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ==============
  [1] one who made the "repair" work & you charged $120 to do a repair installation does not know his a * of his elbow. IMHO he should take care of all of the foregoing to you free of charge.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failed to load service pack 3

  After the download, the computer starts I go to safe mode and uninstall service 3, the computer has been reset to the factory settings in the last 2 weeks so lost all ive added _. Pressario 1000 notron 2010 registered bill msn and mozilla firefox

  Hello
  1. you receive an error message?
  2. What is the processor you are using?
   
  If the processor is AMD then I suggest you to follow the article below.
   
  Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"
  http://support.Microsoft.com/kb/953356/en-us 
  If there is no error message you can follow these steps below.
  You can follow the link below and locate the issue.
   
  1. measures to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
  
  If you find problems after installation of service pack 3 then try this link below.
   
  2. how to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Service Pack 2 from windows update

  I am trying to download service pack 2 for windows xp home edition from windows update and is not download it.

  You can download here:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=049C9DBE-3B8E-4F30-8245-9E368D3CDB5A&displaylang=en

  It is for single PC as well.

  TaurArian [MVP] 2005-2010 - Update Services

• Install Service Pack 4 on Windows XP Home Edition, need Adobe program to print various Government and the USPS form

  I tried many times to print a simple USPS shipping label today, I could download a USPS 88 page manual, but not the program to print the label or the label.  They say that if I use Windows XP Home Edition, I have Service Pack 4 or later.  I can't find any reference to Service Pack 4 on Microsoft help programs.
  Now I'm wondering if there is a solution about my fate.  Any advice will be appreciated. Thank you

  There is no service pack 4 for Windows XP.

  The program you want to talk, it's Adobe Reader? http://get.Adobe.com/reader/ TaurArian [MVP] 2005-2010 - Update Services