Failed to load service pack 3

Similar Questions

• Failed to load Service Pack 1

  I have an old XP computer I want to give to a college student, but he is slow so I reformatted the drive and reloaded original XP software.  I had planned to charge all service packs to make it current.  When you try to load the Service pack 1, I get an error message "the server has failed", while he was at the point of reloading that says "connection to http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a. any ideas what's happening?  All load very well with the operatinging system and the Service Pack started to load ok until it got to this point?  Any help or advice would be greatly appreciated.  Thank you, Jesse Penn

  If you insist on installing SP1a try here instead: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=19751

  You do not need to install SP1a service pack, simply install SP2 then SP3.

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  John

• Failed to load service pack 2

  I have an Amilo Pi2515 (Fujitsu Siemens) running Vista Home premium, I got 8 years no problem until I tried to install a new security system.

  I was told that I needed Service Pack2, I downloaded Microsoft.
  I was unable to install because I was told that I needed to service pack 1
  OK, so I downloaded and tried to install only to be said SP1 is running.
  I went to computer / properties / there is no indication that service packs are installed, but if I get the Dates, I said I'm updating.

  Hi WilliamSells,

  What is the accurate and complete error message you get?

  Method 1
  I suggest to clean starts and then download and install the updates.
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Download Center: Windows Vista Service Pack 1 five language standalone (KB936330)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16468

  Method 2
  I suggest you to reset the Windows update components.

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  
  Method 3
  I suggest you try the steps from the following links:

  Windows Vista get the latest service pack for free (troubleshooting)
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  Method 4
  I would also refer to the suggestion of Tech-Knight dated from
  September 19, 2009

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Service-Pack-2-installation-puzzling-error/52a9deb0-2482-4606-9bf4-42fdbe3c5ae6

  Additional information:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  What version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

• Windows error system32\rtkrnlpa.exe. loading service pack 3 for windows xp

  I get a windows/system32/rtkrnlpa.exe is open, or inuse by another application when I try to download service pack 3 on windows xp?

  help please

  Hello

  1. have you connected external devices other than the keyboard and mouse?

  2. what security software is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Disable temporarily the security software and then try to load Service pack 3 and check if the problem persists.

  Follow the steps to temporarily disable the security software:

  a. right click on icon antivirus on the left corner of the taskbar.

  b. click Exit or settings and temporarily disable the security software.

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Put the computer in a clean boot state, and then try to load Service Pack 3 and check if it works.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: once you have completed troubleshooting try the steps to configure Windows to use a Normal startup state.

  See also the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Hope the information is useful.

• Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663

  WindowsUpdate_80070663

  Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663 if anyone can help me I would appreciate

  Hi Juan CarlosPatlan,.

  Windows Vista has only two service packs. You'll find the troubleshooting steps in the links below useful.

  Reset the Windows Update components

  System analysis tool

  Cannot install updates

  Troubleshooting of Windows Update (same steps for Vista)

  If you are unable to install the updates, provide the following information:

  • The full version of Windows you have installed
  • KB # the update fails
  • The troubleshooting steps you have tried

• Problem loading Service Pack 3

  I am trying to load TurboTax Deluxe and he couldn't because I wasn't using Service Pack 3.  When I tried to download SP3, I got a message "MICROSOFT WORD 2002 the feature you are trying to use is on a CD-ROM or other removable disk that is is not available" and I do not have this disc.  What can I do?

  Through these two articles:

  • Steps to take before you install Windows XP Service Pack 3

  • Windows XP SP3 - read all the prerequisites for a successful installation

  What offers Shenan Stanley is...

  1. Go to this web page: How to reset the Windows Update components? and use the Fix It utility in aggressive mode.

  2. Reset.

  3. Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.

  4. Reset.

  5. Double-click the installation file downloaded in step 3 and follow the instructions.

  UTC/GMT is 17:22 Tuesday, February 21, 2012

• I run Windows XP cant down load service pack 2 reboot and it frezs up to help me please! RDEL

  I run windows XP cannot load it service Pack2?

  When I reboot shoud come back on but frz until having to go in safe mode and remove! Please help me

  randydelk,

  Problem solver Windows XP Service Pack 2/3

  http://winhlp.com/node/125>

  06/05 / 1107:58: 20 pm

• Have problems on loading service pack 1 for vista

  The automatic update for Service Pack 1 for vista has a lot of times I tried manually half way through it failed what do I do?

  Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. Why wasn't SP2, a fortiori, installed SP1 years?

• Windows 7 SP1 - failed to configure service pack - returning changes__

  Man, it was a day both process and still does not.  As for others, I tried all the steps recommended without result.  Once I get my computer to "land of reversion", I think I'll forget install the update.  There must be a bug in it.

  Other solutions?

  ML

  Hello Littletime,

  Thank you for your message.  Could you please let us know the steps you have already tried so that we don't not be redundant?  I will include the recommended steps for troubleshooting the installation of SP1 issues.  If you have already tried these so please do not keep count.

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  The next logical step is to perform an InPlace upgrade.

  Keep in mind:

  An upgrade on the spot is the final solution before you have to reinstall the operating system.
  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  How to perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, follow these steps:

  1. close all running applications.

  2. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD
  in the DVD drive of the computer.

  3. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  1. click on start and typeDrive: \setup.exe in the box to start the search.

  Note Assigned placeholder is the drive letter of the computer's DVD.

  2. in the list programs, clickSetup.exe.

  3. in the settings window, click install now.

  Click go online to get the latest updates for installation (recommended)

  Type the CD key if you are prompted to do so.

  In the "Windows Installer" page select the operating system you want to update or Inplace.

  Click Yes to accept the Microsoft software license agreement.

  On the which type of installation you want? of the screen, click upgrade.

  Once the installation is complete, restart your computer.

  Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  We can't wait to hear back on your part.

  See you soon

• I tried to down load service pack 2, I got error. install service pack 2 regsity step could touch save.

  What can I do to solve this problem with the installation of service pack 2 or the registry key.

  Assuming VISTA Service Pack 2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack:
  http://support.Microsoft.com/kb/967818

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• doesn't load service pack 3 Media windows and Retore xp on a full destructive ed

  can not update explore also keep get message that windows has encountered an error must be closed.  my machine runs a lot faster now but always stops and won't allow automatic updates.  The computer is a GM 834 bridge multimedia pentium 4 media center edition 2005.

  Hello

  1. you receive an error message or error code during the installation of service pack?

  2 have you made changes on the computer before this problem?

  3. how you try to install Service Pack 3 (via update or manual installation)?

  Follow the link below:

  http://support.Microsoft.com/kb/950717

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Hope the above information is helpful.

• I'm unable to load Service Pack 2

  I tried the suggested clean and then tried to download and install again. I just won't work. Any other suggestions?

  Hello

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• Why can't load Windows 7 service pack 1 (KB976932)? I get error codes 80073712and 371b try to download the service pack and Exployer 9.

  I became aware of this problem when I couldn't load Service Pack 1 or 9 of Solution Explorer. I had a nessage download failed and only mentioned such error codes above.  I downloaded System Update Readiness Tool and tried to get these updates again, but still receive error messages.   I have a new HP, about 2 months, if anyone has any other ideas of what I could try to get the updates I want?   I am running Windows 7.

  Hi rn302,

  Try the steps in the following article links:

  Problems to install a service pack for Windows 7 or Windows Server 2008 R2

  Advanced guidelines for the diagnosis and servicing of fixing corruption

  I hope this helps.

• service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

  I have SP2 with all updates, I have this error message after the failed attempt to load service pack 3.

  Hi Carl_Focus_Phone,

  ·         Is confined with Update Service Pack 3?

  ·         Did you do changes on the computer before the show?

  You can follow the steps in the article in the Microsoft Knowledge Base and check if that helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also see the following articles for more information:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

   

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Let us know if that helps.

• Installation of Service Pack 2

  How can I know what system of few I have and how do I load Service Pack 2.  Also how can I load Windows Photo Gallery because it is not on my system?

  You can download windows live essentials to get photo library.