doesn't work not wireless lan

Similar Questions

• Please HELP Fn key doesn't work not wireless working not and network card drivers is not install

  Hello

  Yesterday I bought the computer hp laptop 15-d103tx, but after installing windows 7 64 bit. button fn laptop computer keyboard does not work, Wireless does not work and the network adapter are not installing... is there a hardware problem or is it because of unavailibility of pilots. If it's the driver please suggest drivers

  will be all of your quick response

  Thank you

  Hello:

  Here is the link of the wireless driver you need:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_128686_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• My Apple iPhone 5 touchscreen doesn't work not when the call comes. This problem is only in locked mode and mode unlocked when the call come it works normally. The problem is only locked Iphone and a just coming guard time. give soltn

  Hello can anyone give solution to my problem.

  my iPhone touch 5 works not when it is in locked mode and it's time all incoming call came the touch works do not. other times, the touch works normally wat is the problem. ?

  If you disturb not activated. Settings > do not disturb.

• Impossible to get all the e-mails at work... worked yesterday... doesn't work not today

  can go on msn... click on hotmail... will go to the site to connect but will not download the hotmail page... also my homepage to another location of e-mail... same thing let me identify you but do not download the site/page...worked yesterday... November 7... but don't work not today...

  Hi Schuylerwoods,

  Since you are facing problems with your Hotmail account, you can publish your application in the Windows Live forum to get help:

  Windows Live Support

• Defender doesn't work not, error 0x800106ba code rises and turns off fire wall

  Defender works not code 0x800106ba and fire wall hanging by its essential free installed window on every 5 min when im on the line the wall of fire will turn off then I have to turn it back on it will say several eares with scerity

  * original title - defender works do not code 0x800106ba rises and wall of fire turns off on me responsible continues to do the same essential Windows *.

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Microsoft Security Essentials questions should be directed to the MSE Forums:

  http://social.answers.Microsoft.com/forums/en-us/msestart/threads

  Installation and upgrade of Microsoft Security Essentials program Forum at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• the wifi doesn't work not - says that my wireless capability is turned off

  Original title: the wifi does not work!

  My WiFi worked well on my Lenovo, I think that windows 7 until today, he now says that no connection is available with a red cross on the sign, I ran trouble shoot problems and he says that a network cable is not correctly plugged I or broken, but I double checked all the wires and they are all beautiful and all other currencies in the House have WiFi perfect and filming of disorder also said that my ability Wireless is off does it say I checked everything on the laptop and it seems very well what please help

  Hello

  Do a system restore to before the problem.

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  See you soon.

• Wake On Lan doesn't work not to when the PC is shut down

  Hello

  I plug just the HP all-in - One 200-5110 win7 64-bit and I'm pretty happy with it, everything works fine and I finished the installation but I can't do the work of Wake On Lan (wol) when you clean shutdown of the pc.

  The Office uses the same cable, same switch port with my former 6 year old computer that had no problem alarm since the closure.

  The BIOS I see no parameters, the network card has the latest drivers on the HP site, and I think I tried all possible combinations of settings in network properties. The only way that Office wakes up correctly is to Hibernate or sleep state.

  Here are some screenshots of my settings:

  http://img713.imageshack.us/img713/1424/clipboard1k.jpg

  http://img14.imageshack.us/img14/8003/clipboard2tp.jpg
  http://img406.imageshack.us/img406/1/clipboard3.jpg
  http://img31.imageshack.us/img31/4227/clipboard4k.jpg
  http://img521.imageshack.us/img521/124/clipboard5.jpg

  Anyone have an idea on how to solve this problem? Did I miss something or an option?

  Thank you in advance.

  Kind regards
  Vassilis

  For WOL to work when the computer is OFF, this feature must be enabled in the BIOS > Power. If there is no option, this feature does not work when the computer is turned OFF.

• Connected to home WiFi but not Wireless LAN home page

  This morning, everything was fine but something happened with the printer and now my laptop is all out of whack. I used to be connected to my home network where I could access all computers on the network and my hard drive Western Digital World Book Edition II. I don't know how, but now I'm out of the network. I'm always connected to the WiFi which is available in the House but I can ' t do anything else. I can't watch other computers, print or watch the WD hard drive. I tried everything to get me back on the network, but not luck.

  I am using the following:
  -IBM ThinkPad X 41 Tablet running Windows XP
  -Linksys Wireless-N Broadband Router (model number - WRT300N v1.1)
  -Canon PIXMA MX870
  -Western Digital myBook World Edition II (2 TB)

  I did steps 1 to 6, but he says still unknown

  Sorry if I wasn't clear.

  1-6 steps enable NetBIOS over TCP/IP, which is a good thing to do.  These measures do not affect the type of node.  As explained in the link nitecruzr, there is a good reason to make this explicit parameter instead of the default Windows.

  Reset the 'unknown' to 'Broadcast' node type can be performed by following the steps in KB903267 - but it is I think remember that sometimes the steps described in this article do not work and the type of node is still 'unknown '.  What I meant is that it is OK for the type of node be 'unknown '.

• WiFi doesn't work not, error message "no connection available.

  Hello everyone.

  I have a Lenovo G580. Until last night my wireless worked perfectly. However, the last night and without changing what whatsoever, the wifi icon that showed * which means that it has detected a network, but when I want to press it, it seems that there are no available connections. Although I can connect to the internet via cable, wifi is like I turned it off, only I did not. My laptop uses the qualcomm ar9485wb-eg network adapter atheros. I downloaded some drivers for the Atheros website, but they do not seem to change anything. Does anyone have any suggestions?

  Thank you very much

  Dina

  Hello

  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-8

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• DV7-1130us - quick launch buttons doesn't work not - although they light properly

  I'm trying to enable the wifi, although the quick launch buttons are no longer works. They used to work, although I've had my laptop repaired at the service centre (to replace the keyboard), and I have also now upgraded to windows 7 from my cell phone was returned.

  I did a hard reset, updated the bios and updated drivers for quick launch button, even if nothing works. When windows starts, the image of wifi on the transitions of quick launch bar correctly as it has always done (blue orange - since I had I usually it was disabled before I sent to repair and upgrade).

  Is there a way I can activate the wifi card without having to use the quick launch buttons? The wifi card still worked correctly when it is activated, and that it works correctly in Device Manager. I just need to find a way to use the quick action bar, or get quick action bar work.

  Any suggestions? I had prefer not to send in for repair, it is a long process.

  Uninstall the current HP Wireless Assistant and restart.

  Try installing a newer version of HP Wireless Assistant sp49018.exe

• Windows 10 install doesn't work not after reboot (works fine until the PC is rebooted).

  It's bad enough. Upgrade to windows 10. Wanted to ensure that I started with a clean slate, so I have uninstalled FireFox, and then use the new edge of Windows browser to download the latest version of FireFox.

  He moved very well, remembers my bookmarks and settings, etc. Everything seems fine.

  But after a system restart, the FireFox icon on the desktop and the taskbar are just blank page icon, and when you try to run the program it says it cannot be found, or that I don't have permission to run it.

  Let's not get too hung up on how the bad error message is (go, Windows, who is?), the problem is that a program that worked very well until I rebooted now is not found or all of a sudden, I don't have permission to run it?

  The problem is if I try to boot from the desktop shortcut or if I go directly into C:\Program Files (x 86) \Mozilla Firefox and double-click on Firefox.exe.

  I tried the things:

  1. check the properties of the installer to download stub (Firefox Setup Stub 40.0.3.exe). I noticed that it was reported as a program that had been downloaded on the Internet and could be 'blocked '. So I checked the 'Unlock' button Did an uninstall, and then run Setup again. Everything is fine. Restart - same problem.

  2. check the properties of the installer to download stub (Firefox Setup Stub 40.0.3.exe). I noticed that there are two weird entries 'unknown user' in the settings of security with a sort of GUID. I removed those two. Did an uninstall, and then run Setup again. Everything is fine. Restart - same problem.

  3. do you have an uninstall, and then run the installer as administrator (after making the above changes). Everything is fine. Restart - same problem.

  I'm out of ideas.

  A diagnosis by a Microsoft technician during a support chat session!

  If you want to do a clean install of FireFox on your Windows machine after upgrading to Windows 10, but you had FireFox installed on Windows 7 or Windows 8 before the upgrade, you must uninstall the TWO FireFox and install the service of Maintenance of Mozilla before performing cleaning.

  If you uninstall FireFox but not the service of Maintenance of Mozilla, you will get the squirrels I described, where FireFox stops working after a reboot or a disconnection / connection.

  I think this is related to the BS that Microsoft introduced with Windows 10 where, after installing FIreFox, if you click on the button that says that you want FireFox to be your default browser is not only to persist this setting directly. Need you to the configuration screen of Windows 10 for default programs, which is not at all intuitive, especially those based on past behavior.

  I think that FireFox should put an explanatory text (on the page where you click on the button to make FireFox the default browser) which explains what Microsoft is up to.

  plan to install FireFox on Windows 10 machine

• JavaScript code doesn't work not properly in version 7

  I have a Web site that works very well with the version 3.6.9, now it does not work properly with version 7. My files containing javascript, links in the codes codes are broken when register some controls using the < % @ Register... / > tag.
  for example:
  I have the following code:
  "< % @ register Src="~/Controls/TempMenu.ascx "TagName ="TempMenu"TagPrefix ="uc1"% >

  now, whenever I click on any button in the page instead of redirect me to an existing page in the same folder, it will go in the folder of "controls" and search page it y...

  Help, please.

  A good place to ask for advice on web development is the forum mozillaZine evangelism/Web development Standards.
  
  Aid to this forum are better informed on issues related to web development.
  
  You must register on mozillaZine forum site to post in this forum.

  See http://forums.mozillazine.org/viewforum.php?f=25

• Satellite L755 - 16 M - Webcam doesn't work not running not Win 10

  MI webcam does not work after installing Windows 10.

  Any solution available?

  Can you please post full model name and the model number of machine to ypur?

• Linear in shape doesn't work not as expected?

  Hello

  I use the Fit.vi to NI_AALPro.lvlib:Linear on an array of vertically stacked points. However, the outcome makes absolutely no sense, the fitted line does not represent the input data.

  But if I rotate the points of 1 degree, adjustment seems to work...

  Why is this and is at - it a function or a way to properly adapt their orientation issues?

  Thanks in advance!

  I enclose:

  • The VI himself
  • A screenshot of the VI
  • The image of test (no rotation)
  • The test image (1 degree rotation)
  • A screenshot of the result of fitting (no rotation)
  • A screenshot of the result of fitting (1 degree rotation)

  

  
  

• variable cluster shared doesn't work not as expected

  Hi all

  I use shared variables for communication between a computer host and target time real crio.  This works well as simple variables.  I configured a set of shared variables in an attempt to clean up the code a bit.

  I have some problems.  If I write to a single element, for help, the other elements of the cluster that I don't want to not write to are replaced with unknown default values.   Second, when the host program is stopped, the cluster on the host computer RT wrote what appears to be default values for all variables of the cluster on the RT.  The idea is to keep the RTW program running in its current state until the host computer retrieves.  Of course, this is impossible, if it resets all default data.

  It seems that I can only write to a cluster on one side and read on the other side.  I can't read/write in the same cluster at different points on the host machine and target.  With a shared variable, I can read/write to my hearts content on any process.  I could not find a way to solve this problem.

  I'll post the code, but you will need a cRIO to run it.  If someone uses the cluster shared variables, I'd be curious to see how you do.

  Thank you
  John

  That makes sense, I can think about is that you write on the same cluster in two different places. Each location will update the two values so if the host writes B1 = False and B2 = True then the Rio writes B1 = False and B2 = False, then the variable will be set to the most recent of the two being false. It's a loop condition.

  Even if you only set a value in the bundle name the another value from the cluster to a package of entry by name.

  To manage this, you'll need to remove the cluster to enter the bundle name and replace it with the shared variable read. This is where you need a time to make sure that the variable has the most recent value updated.

  Also, you still have the stress points. For the shared variable try linking to the custom control instead of an indefinite cluster (choice according to below in the setup of the SV)