Don't buy not possible after trial - send them free license to me

Similar Questions

• HP laptop Beats 15: Incomplete restoration and don't reset not possible

  I upgraded from Windows 8 to 10 Windows, somehow my google chrome has become corrupted.  I tried to do a factory reset, but got an error message which reset was not possible, created a recovery drive and tried to perform a system recovery.  Incomplete recovery now appears on the screen when it is eaten on.  I am unable to do anything else.

  Hello

  You are welcome

  First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

  Follow the rest of the guests to create this and then click on finish when done.

  Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to select CD-ROM or USB key, depending on the type of media you created, and then press ENTER - if you are prompted to "Press any key to continue...". "- make.

  Kind regards

  DP - K

• import playlist is not possible after updating itunes

  I installed itunes to 12.5.1.21 (OS Windows 10, German language). Now, it is not possible to import old/previously exported playlists more. The error message says something like (translated from German): "xyz" file cannot be imported, it seems, it has been exported incorrectly.

  Someone has this problem and are there corrective action do you?

  I have the same problem. All the Solutions!

• Virtual disk don't is not displayed after creation

  Host - XP SP3-running VMWorkstation 6.5 system

  The use of VMWorkstation with the Virtual Machine, a virtual disk is created (IDE) to be used with the virtual machine. When creating of success of the virtual disk in a new folder called "Virtual disk" on the host drive, the VM is launched (XP SP2). Virtual Windows starts without a problem, however the newly created virtual disk is not displayed. How can I get the VM to see?

  Thanks, newbie TM

  Which means that your issue is resolved?

  If you have additional questions, feel free to ask them.

  If your problem is resolved, could you please mark it as answered? It helps other people who search the Forum because it is always easier to just check the question correctly answered not all after a search.

  While you're there, you are invited to also mark messages as useful/correct, this also affects virtual points to the person who helped you. Not nearly as important as the marking which is OK, but for sure appreciated

  --

  Wil

• If I do the free trial of 30 days for photoshop how to stop use it so I don't is not charged after 30 days? It will just fade away? or if I continue to use it I will be in charge?

  If I use the free 30-day trial for photoshop I get charged if I continue to use the application after 30 days? Or how to stop using it after 30 days

  There is no charge and no financial information that must be given to your 30-day trial.  your software will stop working after 30 days so keep using it beyond this period will require payment.

• Value of the page element in the APA process not maintained after the send this page

  Hello - I have a sequence of events that goes like this:
  
  (1) region 0 REG_1 Page is rendered before footer
  -REG_1 region uses javascript / AJAX to call App process PROC_1
  -PROC_1 defines Page1 item PAGE1_MESSAGE for X
  -After that PROC_1 runs correctly, REG_1 don't doSubmit()
  
  (2) region 0 REG_2 Page is rendered before footer; in this case
  After the page sent by REG_1. (Requirements to ensure that)
  REG_1 has not yet reached)
  -REG_2 region shows an alert PAGE1_MESSAGE (= X).
  -REG_2 region uses javascript / AJAX to call App process PROC_2
  -PROC_2 sets page 1 point PAGE1_MESSAGE to Y
  -PROC_2 sets point Application DEBUG to PAGE1_MESSAGE (this is for debugging)
  -PROC_2 defines the point of Application APP_MESSAGE to Y (this is also for debugging)
  -After that PROC_2 runs correctly, REG_2 don't doSubmit()
  
  (3) after that REG_2 sent the page, here's what I have:
  -Point application APP_MESSAGE = y. good. That's what it has been for PROC_2.
  -Point Page 1 PAGE1_MESSAGE is bad. X. That's what he has been put to in PROC_1.
  -Point application DEBUG = y. good. This shows at least that PAGE1_MESSAGE was
  the value Y in PROC_2... but for some reason this value is not be kept
  After the application process is running.
  -There's that several other elements of the application located in PROC_2, and they are all correct.
  
  
  Any ideas as to why this is happening? It seems like it should be
  quite simple: set the value, send page, the value must be that
  I put it.
  
  Thank you
  Carol

  Hello

  Exhibition (doesnot save session state), I am not changing who is P1_MESSAGE_1.

  Why does that matter? Why does the hidden item behave differently?
  

  Yes, Hidden Items by usually default state saves. But this isn't the problem in this case because I had changed the item to display only (state saved) and that did not help. Finally back in doesnot save state.

  Try to replace alert (ajaxResponse); with the lines below

  $s('P1_MESSAGE_1',ajaxResponse);
  alert($v('P1_MESSAGE_1'));
  

  Maybe the session state is defined (server), but the value in the DOM HTML (browser) to P1_MESSAGE_1 is not defined. If adding the line above works then the hypothesis is correct.

  And I see that you made the source "static" assignment ...
  

  Yes, I made this change, because it was a reference in itself I think it was redundant. And I had to correct what I thought is not just before debugging. Which cannot be linked to the problem though.

  Kind regards

• Words don't is not displayed after the update to iOS10

  Many songs in my library have incorporated the lyrics (that I added using the 'Words' of iTunes tab). I'm used to be able to see everything while listening to the songs on my iPod Touch by tapping the image "sleeve" of the song.

  After the iOS10, this method does no more work. The other method, new to iOS10 (a special menu item "Words") does not either, as I don't see this anywhere menu item for all of my songs containing words. (Someone said that this function only works for the songs in Apple's music.)

  What should I do to restore this feature? Return to 9.3.5 or wait until Apple condescending to people like me who want to be able to read the lyrics while listening to the songs and who do not want to subscribe to the Apple's music?

  Form the iOS 10 manual

  See the lyrics. Drag until you see words, and then press Show to see. Press Hide to hide.

• HTML Article assemble dynamically, do scroll is not possible after the orientation change

  Hi guys,.

  I encountered the following problem today:

  Im having an HTML page set dynamically from a source JSON file, manipulation of information in JSON with jQuery. I'm downloading the page HTML (html page is empty until the page is in the DPS stack, then it builds) as an HTML article with the ' Smooth Scrolling: vertical. So far so good.

  When I open the page inside the Adobe viewer app on my iPad, I can see the "first" part of the page (the first 1024px in portrait orientation), but I am not able to scroll further down the page.

  However, when I do a change in orientation of the device (turn it landscape and then come back), I can scroll perfectly well and am able to see everything on the page (so I'm quite sure that the json in jquery for html conversion work). still unknown, when I let the page tell me his height (via $("body").height () and $(document) .height ()), it shows me that the height of the page is in effect (for example) the 10.000px, but I am not able to scroll down until I do the orientation change.

  am I missing something? im sure that my code is correct, because once I change the direction of my camera, everything works perfect.

  
  

  I hope that my problem is understandable, any help is very appreciated.

  
  

  Thank you

  
  

  Max

  You have correctly identified the root cause: we ask the page height so we can tell the web control what content is the height. If there is JavaScript that runs when the page is loaded (or at any other time, honestly) which changes the height of the page, what could happen after that we ask for the height.

  It is, unfortunately, no way to send a signal to the app ask that we re - check the height of the page and update the web control accordingly. I think the reason why it works on rotation, we only are not destroy and recreate the web control, so the height of your page is calculated correctly, but we re - ask the height so we can draw the control.

  Neil

• Windows 7 Ultimate don't re - not start after last Auto Update__Error Code (0xc0000022) criticism

  Since the installation of the latest update of Windows (critical update), I am unable to re - start. (February 10, 2010)
  The computer displays and gets to the windows screen and when about to load up in the browser, I get the error in a box.
  "The application could not start properly (0xc0000022). Click OK to close the application. The real app is explorer.exe. Application error.
  If I click OK, the screen is empty. (Black screen)
  Hit the CTR ALT Del give me options, but by hitting the start Task Manager I get the same error this time the applciaton be the Task Manager with the same error as above.
  I am able to start safe mode and have tried both use the built in startup (which is incapable of solving the problem) repair and also tried to revert to a previous version via the system restore without a bit of luck. The same errors appear every time.
  Help, please?
  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Home page of Security Support consumer & Microsoft Update Solution Center also offer support options
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• LR update is not possible after the CC licenses

  Hi all

  I had a testinstallation LR 6.1 and bought the CC (Fotography) yesterday. My OS is Win7.1 Pro (64-bit). While LR is able to synchronize with mobile LR, now (so CC is turned on), I can't update to LR6.5. The update function is grayed out. So I can't import Fuji RAW X-Pro2. Help / about LR... tells me that Adobe RAW 9.0 is used. A manual installation of 9.5 does not change this.

  I have tried several different LR installation procedures, scorched stays / in the CC app, used the clean tool CC, renamed SLcache, restarted,... nothing worked.

  Can someone tell me what I should do to get a recent update?

  Best regards, Dieter

  I found a solution on the net. I had to remove a file from update preferences, then it worked.

• Don't change not shown after you save the changes

  Hello

  1 has created the View object (VO1) involving employee of paintings for example, Department,.

  2 created another view (VO2) created a link with emp_id with VO1, now VO2 depends on VO1

  3 created another view (VO3) with single employee table and link created with VO2. I want to update the name of the employee.

  Created page jsf and drop VO1 as list of navigation (Select Department) and in detail droped VO2 that displays department_name, name of the employee, and for the update employee name droped VO3, based on VO2.

  It's working well.

  Problem: When I change the name of the employee VO3 and press the button Save, it works very well, but does'nt update the name of the employee in VO2, that I must change the record of the navigation list, and then select the same folder to see the changes.

  I also want to show the update button on VO2.

  Thank you

  Well, go to the pageDef and insert action link. In the dialog box that appears, select appropriate iterator and then operation or Execute. After that, you can use the OperationBinding I order to perform this action.

  Take a look at:

  Oracle ADF quick how-to: Calling ADF Action binding programmatically

  As another option, oyu can refresh only VO 2 of current line:

  Andrejus Baranovskis Blog: Full simple refresh row without restoration

  search for:

  "Row refresh is implemented as a custom method inside the View object implementation class."

  JohnMackanzi wrote:

  How executeQuery for VO2 Pro grammatically? Please explain

• Firefox does not work after all, uninstall them and reinstall.

  Very few of the buttons are used in the firefox menu. Add ons will not open the Manager. None of the buttons on the open Help menu, open only a few menu options. Does not work in safe mode. I completely uninstalled, went into effect the deleted data from the preferences file. Reinstalled several times and nothing... Kind of frustrating. Any ideas?

  In case someone else runs into this I thought about it. I had to remove the program, remove the Preferences folder in Appdata, then click on registry local machine > software > mozilla and then delete the registry keys. There are three folders, I don't remember the exact name, but they all began with Mozilla. Once I did, I rebooted and reinstalled. Now it works...

• Calculations... why they still show not checked after I delete them...

  Hello world
  
  Hope everything goes well...
  
  Is there a way to remove calcs so that they disappear from the workbook.
  
  I tried... and Calc is still show unchecked...
  
  Your advice and your ideas are appreciated, tx, sandra

  Hi, Sandra
  Its possible that a another calculation, or condition is their use. If you are sure that this is not the case and you can't remove them then there is a glitch inside more. In the past, I've erased it by opening the workbook in office and delete them there.

  Best wishes
  Michael

• Purcased Hawaian Starter Bundle for Microsoft Flight, the problem is that the areochase has begun to do not save after I get them.

  Once I instaled the Hawaiian starter pack the areochase once that I get them is not there when I stopped and load the game again.

  Hello

  The question you posted has to do with the Games Microsoft Flight and better you can contact the support team at Microsoft Flight.

  CONTACT US:

  https://microsoftflight.com/en-us/contactus/

• Lost access to Active Directory after the seizure of free license

  Hi all. I'm having a time difficult understanding free esx compared to the features of the evaluation mode. I installed esx 3.5 on a server, I manage with Vclient and built a virtual machine with an instance of Server 2003 on it. For a day or two, I was able to add users and groups to AD to the virtual machine without any problem. After you enter the license key for free, I am unable to see ad now, only able to add users and local groups. In addition, where the users and the groups I had added previously from ad once introduced, they show now that the strange code? Someone at - it an entry here? Thank you.

  If you consider any comments as useful, please give points

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru