LR update is not possible after the CC licenses

Similar Questions

• Automatic updates do not work after the repair of the windows XP operating system

  automatic updates of Windows do not work after the repair of the operating system

  Hello

  What exactly is the error message? Updates download? Are they trying to install but do not?

  Here are some common steps that you can take to solve the problem:

  http://support.Microsoft.com/kb/883614

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• Update will not continue after the confirmation of the loss of personal data

  Hi all

  I tried to update my Xperia X 10 mini for Android version 1.1 to 2.1 using Bridge Sony for Mac, but after checking that I understand that my personal data will be lost, the program will not continue. I can click on the "continue" button as often as I like, but nothing happens.

  Is there someone who can help out me?

  I decided to try to update my phone with computer Windows of my roommate. It worked like a charm. I haven't met any other problem during or after the update, and that's certainly what I would recommend to anyone with similar problems.

• DELL UPS Network Management Card firmware update is not possible in the management of inverter DELL Multi console

  I have a problem with the update of some old software on a DELL UPS Network Management card in DELL Multi UPS Management Console.

  We have a few more recent and some models with very old Firmware. The older firmware is: 01.02.0013
  I imported the update of the firmware: 01.16.0001
  If I select this version behind the inverter with firmware 01.02.0013 it is a red exclamation point.

  

  Also, I can't get to the this inverter https address.

  So I do not know how update the firmware of the network management card, please anyone who has a solution...

  .

  I got it finally working.

  I couldn't connect to the interface webGui of UPS in https on IE 6,7,8,9 and calibrated to an ssl error Firefox.
  I could not update the firmware using DELL UPS management software can. fatal error.

  I then installed Chrome, when connecting to the web GUI I ignored the warning of certificate error and waited...

  YES. The web Gui appeared, asking for the password and the Web GUI that I could install the firmware 01.14.0003

  After the update of the firmware in the webgui I was able to upgrade to 01.16.0001 in DELL UPS software Multi management.

  

• BlackBerry smartphone app world update does not work after the update of hourglass and error

  I've recently updated blackberry app world on my 8350i curve to the latest version

  and after that all I get is an hourglass and after 10 minutes, I get java.lang eception exception on error memory

  I tried to remove it from the applications menu, battery pulls and all that and I reinstall I get the same thing. is it possible to completely do a fresh install or recover the old version or restore the old version from an another bberry... help this has been driving me crazy for a while now... thanx

  Sorry for the late reply, I've been away for a few days.

  I think that your device operating system may be corrupted. You can try the following:

  1. Backup cell phone: http://www.blackberry.com/btsc/KB12487
  2. Backup 3rd party applications: http://forums.crackberry.com/f3/how-back-up-3rd-party-applications-53201/
  3. Perform a new installation of your operating system: www.blackberry.com/btsc/KB11320

  You can restore the 3rd party applications using Add/Remove program and accessing the file alx for step 2: http://www.blackberry.com/btsc/KB15172

  Try to install app world now.

• HTML Article assemble dynamically, do scroll is not possible after the orientation change

  Hi guys,.

  I encountered the following problem today:

  Im having an HTML page set dynamically from a source JSON file, manipulation of information in JSON with jQuery. I'm downloading the page HTML (html page is empty until the page is in the DPS stack, then it builds) as an HTML article with the ' Smooth Scrolling: vertical. So far so good.

  When I open the page inside the Adobe viewer app on my iPad, I can see the "first" part of the page (the first 1024px in portrait orientation), but I am not able to scroll further down the page.

  However, when I do a change in orientation of the device (turn it landscape and then come back), I can scroll perfectly well and am able to see everything on the page (so I'm quite sure that the json in jquery for html conversion work). still unknown, when I let the page tell me his height (via $("body").height () and $(document) .height ()), it shows me that the height of the page is in effect (for example) the 10.000px, but I am not able to scroll down until I do the orientation change.

  am I missing something? im sure that my code is correct, because once I change the direction of my camera, everything works perfect.

  
  

  I hope that my problem is understandable, any help is very appreciated.

  
  

  Thank you

  
  

  Max

  You have correctly identified the root cause: we ask the page height so we can tell the web control what content is the height. If there is JavaScript that runs when the page is loaded (or at any other time, honestly) which changes the height of the page, what could happen after that we ask for the height.

  It is, unfortunately, no way to send a signal to the app ask that we re - check the height of the page and update the web control accordingly. I think the reason why it works on rotation, we only are not destroy and recreate the web control, so the height of your page is calculated correctly, but we re - ask the height so we can draw the control.

  Neil

• HP Mini 210-4120: Windows Update does not work after the Reset HP Mini 210-4120 factory

  Following the advice in another post on this site, in order to create a "clean" installation and his work & Office Starter (they do now--they have not before) I did a reset to factory of the recovery partition. (Trying to create discs of recovery or a USB key on the two brackets to the stage of checking).

  The new game worked well, without error, BUT try as I might, I can't have the updates of Windows to work. If tried to re - adjust the C:\Windows\SoftwareDistribution folder, sfc/scannow (no errors found) and using the powerful Microsoft FixIt which is supposed to re - install the Windows Update service - all without success.

  I read on a post no HP (but I can't remember where!) someone finds this problem caused by a chip Intel driver, so maybe that could be applied to my PC.  However, since the factory Reset recovery Partion includes SP1, I would have thought that at least the system should download updates!

  I get no error message, it justs waits... and waits... and waits.  I let wait for 90 minutes, but there is still no sign of activity.

  I hope someone knows how to solve this problem otherwise I'll have to go back on my installation of non - Office Starter - his, no. (Who, fortunately, I have a couple of image.)

  Hello:

  I get it, I guess.

  I thought that you also had a simple W7 starter installation disc (which must be done by editing the efi cfg file in any drive of W7 installation), and then you use the product key on the case of the laptop to turn on.

  I knew that you had tried the partition recovery without result.

  I was in the middle of the answer I have provided the link for audio driver, and I see that you already have.

• Windows Update does not work after the formatting and reloading windows xp pro - 0x8024400A error code

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem... is back with an error number error code: 0x8024400A... but my internet connection is fine...

  Hello

  Install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  You can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  This should move your 0x8024400A problem. So try and get up-to-date with the Windows updates. You have to go through Genuine Windows Validation.

  Tricky

• AT300 unrecognized external power - system update is not possible

  I have an AT300 bought in the United States, but I live in Germany. I bought a Kensington absolute Power Dual USB wall adapter with 2. 1 is to connect the USB charging cable to charge the tablet that works very well. Now, the Toshiba Service Station concludes a update for the Tablet system however, an update is not possible because the update process think that a charging cable is not attached, even it is. Why the Tablet does not recognize the connected charger cable? How can I do a system update? What is the difference between the wall adapter to the United States and the Europe Kensington adapter?

  My guess would be that Toshiba has put a few resistors-ID in the data line in the standard charger so you can identify it.
  Here is an article on Apple doing: [epanorama | http://www.epanorama.net/blog/2010/08/18/apple-charger-secrets/]

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Delete photos from my camera do not roll after the update to 9.3.1 IOS iphone 4s, also the photo has not saved when taken by camera

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  Mhefzi86 wrote:

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  OK, thanks for sharing.

  Maybe you can provide clarification comments on what happens when you try and what troubleshooting steps you did.

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414