don't restart after update Win xp pro

Similar Questions

• By using the system restore before computer restart after updating Windows 10...

  I chose to try the upgrade of Windows 10 on my laptop primary.  Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning.  Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems.    Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward.   After serious soul searching I elected continue to use Windows 7, I don't really like.

  That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10.  I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.

  Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled.   The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.

  This window doesn't go away even after reboot, and I can not "check for Updates".

  Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.

  Thank you for any assistance.

  By using the system restore before computer restart after updating Windows 10...

  Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.

• After update for first Pro CC 2015.3 I can not move the values in the effect controls panel

  Hello!

  After update for Premiere Pro 2015.3 of CC, I can't change the value of the property in the effect controls panel by dragging left or right when you move the pointer over the underlined value. The two small arrows appear, but nothing happens when I drag them and it is so annoying. I tried now pressed the SHIFT key and several others trying to drag, but it makes no difference. I restarted the program and my computer but still no difference. All the patches?

  Thank you!

  

  Hello Ann,.

  I found the problem, it's my wacomtablet. When I use the magic mouse, it works great! So, I guess I should update the wacomdriver, perhaps. If your response gave me the idea to check for this. Thank you!

• Installation of Boot Camp utility stopped working after that Win 10 Pro was made.  Installer got stuck on step 'realtek' audio  I restarted Windows, but Boot Camp does not resume or restart the Windows installation process-side utilities?

  How can I get the Boot Camp utility to install entirely in Win 10 Pro?  After winning 10 Pro was finished installing, the installation of Boot Camp process began but eventually got stuck at halfway through (for 20 minutes) on stage 'Realtek Audio.   A restart of Windows has not triggered a recovery or re-starting installation of the Boot Camp utility.  Windows, it works, but I have no utilities 'Boot Camp' and can not find any Boot Camp file stored on the side of Windows again.

  Please see Bootcamp 6.0 driver install interrupted for resolution.

• FF restarts after update one opens a new box that says update highly recommended when I click on next FF is unable to connect to the server, it's been going on for two weeks. What continues?

  FF says that an upgrade is available. After that has been done and restarted FF another window opens saying that a very important (urgent) update is nesscary, when I click on the button NEXT, a progress bar appears and says the connection to the server, but NEVER seems to connect, and no matter how long I leave it does NOT connect. It just sits there trying to connect while I use FF.

  Do a clean install (re)-:

  • Download a new copy of Firefox and save the file to the desktop.
  • Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  • Do not remove the data of a personal nature if you uninstall the current version.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• Update Win 7 Pro to win 10 Pro

  When I received notifications on my computer at the office (Win 7 Pro); Home (Win 7 Pro) and my laptop (Win 7 Pro) in all cases, I see only a verification that I am currently running Win 7 but no mention of the Pro!  I need for remote access.

  As I read the many comments on the situation, I hope that I understand that if I have Win 7 Pro, I will be upgraded to win 10 Pro.  However, before you start the upgrade on any of my computers, I would like to know if there is a way required and recommended to start the upgrade that will ensure I get the Pro versions or will happen automatically?

  Yes, your installation of Windows 7 Professional will be modernized for Windows 10 Pro.

  If you start the upgrade through Windows Update, or media ISO creation tool, you will get 10 Pro in Windows.

  • How to: install Windows 7 by using Windows Update or Windows 10 Windows 8.1
  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• After update my iPad Pro with 9.3 iOS iPad crashes on safari. For example I googled something results appear, but I am not able to enter any page, because the iPod does not respond

  After update my Pro iPad with iOS 9.3 iPad crashes on Safari. Example I googled something results appear, but I am not able to enter any page

  It seems that it is a result of the update. Other users report it, and I also read that Apple is aware of the problem and working on a fix. Be patient and watch for an update. Some have reported that disabling Java script has worked for them. You need to check yourself.

• Tecra S1: After update Win XP SP3, install Bluetooth driver crashes!

  Hello

  after update the Win XP Professional from SP2 to SP3
  Bluetooth doesn't work anymore.

  I tried to reinstall Bluetooth drivers.
  It crashes during installation,
  If you need to cancel the installation.

  There is nothing to get the correct installation finished.

  Someone has solved the problem?

  Thank you.
  Patrick

  I'm also using XP SP3 and it works. So, try the following:
  S ' ensure that the wireless switch is turned on.
  -Ensure to that Bluetooth stack is correctly uninstalled (answer all questions during the uninstallation with yes).
  -Download the latest Bluetooth stack.
  -Install it.

• Photosmart C3140: Don't scan after update to the Mavericks on Mac

  After updating my Mac to the Mavericks, now my printer not scan.  It will print, however. But when I try to scan, I get this error message:

  Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps: start the program again. Close all programs that might be using the device. Restart the computer.

  I did everything above. I have also turned off the printer and unplugged for a few minutes. I rebooted several times. Thanks for any help you can offer!

  Hello

  Thanks for your help. I have a successful solution of Apple that I wanted to share with other people who may have this problem - it involves an impression through the preferences system, a bit bulky but not too expensive:

  Go to system preferences

  Printers, Scanners &

  Choose Scan from Print/Scan above the name of the printer

  Open scanner

  In the dialog box that appears:

  Make sure that "scan to" say where you want to be saved, otherwise you can not know where TI saved.

  Press Scan.

  (If the dialog box opens to the top immediately, please be patient.)

• Win 8.1: update Win 8 (Pro)

  Hello

  1. may I know what is the release date to win 8.1?

  2. can I put what I did Win 7 (Pro) to Win 8 (Pro) without losing my software and data files present (instead of install)?

  3 my current version of window is Win 8 (Pro), when it upgrade, it is automatically upgraded to win 8.1 (Pro)?

  4. What is the estimated to Win 8.1 download file size?  < 1="" gb, =""> < 1.5="" gb, =""> 2 GB, between 1.5 GB to 2 GB?

  Grateful if someone knowledgeable could bring me answers of thye.

  Thank you

  Low

  The update will be deployed in windows update, so no need to you what, 18

• EMCC OUI(Win 2012) does not restart after updates.

  Hello

  I am trying to install the EMCC 12.1.0.4 on a virtual machine in Windows Server 2012 hosted on an ESXi server. Previously installed without getting updates completed without any problems. Because some features did not work properly, I decided to install once more and also get updates from Oracle. I followed the directions of advanced installation. The virtual machine has been reset to the stage before. So no installation is dirty.

  After getting updates and display the patches Oracle Setup calls a Windows saying that the installer will be restarted. But it's not. I waited and waited, but nothing happened.

  Newspapers shows the first steps after the restart and no other error. I tried several other approaches:

  1. download the updates from the server to install and use my credentials for Metalink

  2. use the option - ignoresysprereqs

  3 use the option - showProxy

  4. download updates on another server using the option - downloadUpdates as the copy on the server to win 2012.

  In all cases the same behavior:

  After you click OK in the windows message saying that will follow a restart of the installation, the installation program restarts, a command window is displayed for 1-2 seconds, then everything stops.

  I have everything running as administrator.

  See below the last lines of my log file of the inventory from the last test.

  INFO: 18.05.15 13:12:05 CENTRAL: already downloaded updates is selected.

  INFO: 18.05.15 13:12:05 CENTRAL: validate the variable: STAGE_LOCATION

  18.05.15 13:12:05 CENTRAL: STAGE_LOCATION = C:\temp\OraInstall2015-05-12_09-51-47PM\updates

  INFO: 18.05.15 13:12:05 CENTRAL: all the fields are valid

  INFO: 18.05.15 13:12:05 CENTRAL: POPUP of WARNING: Das Installationsprogramm wird neu gestartet.

  INFO: 18.05.15 13:12:17 CENTRAL: the ID of the Bug 14045804 YES

  INFO: 18.05.15 13:12:17 CENTRAL: the ID of the Bug OPatch-1

  INFO: 18.05.15 13:12:17 CENTRAL: XML download location: null

  INFO: 18.05.15 13:12:17 CENTRAL: the file path is C:\Users\Administrator\defaultProperties.PROPERTIES

  INFO: 18.05.15 13:12:17 CENTRAL: Scratch Path = C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46 h

  INFO: 18.05.15 13:12:17 CENTRAL:-scratchPath

  INFO: 18.05.15 13:12:17 CENTRAL: C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM

  INFO: 18.05.15 13:12:17 CENTRAL:-sourceLoc

  INFO: 18.05.15 13:12:17 CENTRAL: C:\temp\emcc_install\install\... /stage/Products.Xml

  INFO: 18.05.15 13:12:17 CENTRAL: sourceType.

  INFO: 18.05.15 13:12:17 CENTRAL: network

  INFO: 18.05.15 13:12:17 CENTRAL:-timestamp

  INFO: 18.05.15 13:12:17 CENTRAL: 2015-05-18_01-07-46 H

  INFO: 18.05.15 13:12:17 CENTRAL:-ignoresysprereqs

  INFO: 18.05.15 13:12:17 CENTRAL: RESTART command: line cmd /c C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/install\setup rscratchPath - C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM - rtimestamp 2015-05-18_01-07-46 h - rstartupLoc c:\temp\emcc_install\install-redemarrer - ouifromLocation C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/stage\products.xml - ouiResponseFile C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/stage\Response\oracle.swd.Complete.rsp - ignoresysprereqs - paramFile C:\Users\ADMINI~1\AppData\Local\Temp\2\ OraInstall2015-05-18_-07/01/46 PM/temp.ini - jreLoc C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM\jdk/jre - J - Doracle.installer.extjre = false

  Test auto-updates to date: using paramFile: C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM\temp.ini

  Check the swap space: must be greater than 150 MB.   Real 5625 MB passed

  Monitor: must be configured to display at least 256 colors.    4294967296 real past

  The command line to decompress:

  C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1\install\unzip - qqqo... \stage\Components\oracle. SWD.oui\12.1.0.1.0\1\DataFiles/"*.jar" d "C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM" INFO: 18.05.15 13:12:22 CENTRAL: validate the variable: STAGE_LOCATION

  18.05.15 13:12:22 CENTRAL: STAGE_LOCATION = C:\temp\OraInstall2015-05-12_09-51-47PM\updates

  So, if someone met sam ahint problem would be appreciated.

  Best regards

  Cantemir

  Hello

  a realization to the description in my question:

  The list of patches to install was the following:

  Patch 19337487 for the Service of management of Oracle for 12G

  Patch 19003055 for the Service of management of Oracle for 12G

  Patch 19519190 for the Service of management of Oracle for 12G

  BASIC 20392036 ENTERPRISE platform MANAGER - SGD 12.1.0.4.3 PSU (GENERIC)(System Patch)

  Updated 14045804 YES

  And I was able to capture the contents of the command window that appears for 1-3 seconds prior to YES.

  Are more errors saying:

  ...

  error: cannot remove the old c:\Users\Admini~1\AppData\Local\Temp\2\OraInstall2015-05-18_02_04_18PM\oui\jlib\xml.jar

  ...

  YES updates patch would probably come in conflict with the running configuration.

  In any case have not yet no solution.

  Cantemir

• don't restart after 2016-001 10.11.6 security update

  I've updated a security update today 2016-001 10.11.6 as my computer does not, restart a few visits on this page

  Shut down the computer using the power switch, and then restart. After the restart, hold down the option/alt key while clicking on the  menu and select system information. Refer to the Installation section to see if the update has been installed. If this is not the case, use the link below to download the update. This happened to me when I tried to install it.

  Security update 2016-001

• Win 7 restart after update - where the flag.

  When an update is made, sometimes a reboot is required.  No one knows where, in the system, this requirement is implemented?  Y at - there a way to change this, if the system does not start properly, but just attempts at repairs and restarts?

  This question about the installation of updates, just is not the computer usable again.

  Retoring to a previous version does not work, cannot start in safe mode, but it is not my computer and cannot answer any other questions.  I think that a flag would have been set in the registry, or perhaps in the logic of initialization somewhere, but I don't know.

  So, is it possible to use msconfig or regedit or taskmgr bcdedit to make changes that would eliminate the requirement to complete the update and allow a normal start?  Or a way to uninstall the update incriminated by using system recovery?

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite L500 - 1-7 - WLAN cannot be activated after update Win 10

  Toshiba dear friends,

  I've updated the laptop L500 - 1 7 my girlfriend to win 10. (I know that this model is not in the update list).

  All is well, but the WLAN from WINNING 10 does not work.

  The network adapter is on and working, the WLan network also works.
  But it is not possible to activate the WLAN.

  Does anyone have the same problems and maybe a solution for me?

  Thank you very much in advance for your help.

  Best regards

  

  If Wlan module / card is recognized in Device Manager and you should be able to activate and use the WiFi.
  So I was wondering why it is not possible even if the Realtek RTL8187B wireless card appears as a recognized device...

  In any case, I recommend you connect the laptop to the internet using LAN.
  Then go to Device Manager and uninstall / remove card wireless network from the list of devices.
  After this reboot of the laptop.
  Now after restarting again, the system should look automatically new updated and in most cases, this should fix the problems of WiFi...

  In addition, you can also check page driver for Realtek RTL8187B Realtek latest driver

• Moto E auto-restart after update to 4.4.4

  Hello

  After the Android 4.4.4, update my phone is is restarted as part of operations. This number of times these days. Is there a problem with the update?

  Let me know what needs to be done.

  Kind regards

  Raj.