don't try to install windows 7 but it says no driver

Similar Questions

• New hard drive try to install Windows vista but it keep suspended after 60% and collapsed them

  New hard drive try to install Windows vista, but it keep suspended after 60% collapsed I tried a few time every time I had to wait for 5 hours, but the same thing happen again and again can help you pleaaaaaaaaaaaaase

  Monastir,

  What happens when it stops it is have a Sata driver. It is on the drivers cd you received with your computer. You can also start the computer and press F2 to enter the bios. From there down to Configuration system - SATA Operation and change this to ATA. It is located to AHCI. Save the changes and restart the installation. Once you have loaded Windows and drivers installed, you will need to go back to AHCI.

  Dell-Jesse

• Try to install Windows 7 but the grip to install in the "collection of information".

  suspended in the "collection of information".

  Try to install Windows 7, suspended in the "collection of information".  Any suggestions?

  How long you wait to determine that she is hooked on collecting the information?

  You try to upgrade or clean installation?

  You disconnect all devices non-essential connected to the computer before attempting the installation?

  If you are upgrading from a previous version of Windows:

  1 disable any security software before attempting to upgrade
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

• Try to install Windows defender installation it says remove microsoft client protection this product

  try installing win defender to installation it says... microsoft client protection remove this product... never seen that before... That's all I got as possible no matter of no further details

  What antivirus/security program you have already installed? Looks like you got Microsoft Live OneCare from Microsoft Security Essentials. These two will not install Windows Defender, because they already have antispyware components. MS - MVP - Elephant Boy computers - don't panic!

• Try to install Windows XP but don't get a message: Setup cannot find a previous version of Windows installed on the computer.

  Install XP instead of Vista

  I tried to install XP in my laptop ASUS PRO31jr which currently has Vista Home Premium installed.  I updated the BIOS first and changed the boot on CD/DVD order.  Disk load bunch of drivers, then when it gets to the installation, said he cannot find a previous version of windows installed on the computer and calls for an XP Home edition (full version), or a CD of XP Professional (full version).  The CD I have is XP Professional Academic Edition version 2002.  RHE booklet supplied with the disc seems to indicate that this is the full version, and I successfully used to clean install on XP.  Is the drive of my problem?  I would appreciate a difinative answer if anybody out there knows for sure.  Goodwich.

  If the message "Setup cannot find a previous version of Windows installed on the computer", you have an upgrade version that requires Windows XP Home Edition installation.

• I try to install Windows Defender but message warns me that year error has occurred, 0x800705b4 and time has expired. I go to help & support but can't follow the directions stated

  I have windows Vista laptop, installed IE9, service Pack 2

  Hello

  You cannot uninstall or reinstall Windows Defender in Vista.

  It is part of the operating system that you have been explained.

  As you don't say what your problem is with the Defender, this can help you:

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually activate new Windows (do not take into account information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Try to install Windows 7 on the new hard drive - 500-298w Pavilion

  System hangs on the language selection screen after the loading of files and Windows startup screen. No keyboard or mouse input. Tried to move the keyboard usb on the front and back of the usb ports. Hard drive is recognized as a storage device in the BIOS

  Things I've tried in BIOS

  -in Storage Options: I tried IDE and AHCI

  -UEFI Boot Sources: disabled

  -Legacy Boot Sources - CD/DVD is installed on the first position

  Secure Boot cfg: leg Sup-> Enabled, secure startup-> disabled

  Tried with quick start-up tech and virtualization enabled and disabled

  I have to do something with key Mgmt?

  Should I start a self-test DP? 270 minutes... Ouch

  Anything in the options to be changed.

  .. .confused

  Still have the original with Windows 8.1

  Hello

  Do not forget to connect the keyboard and mouse USB 2 ports (not USB 3).

  If you are using a non-US keyboard and/or a version non-English version of Windows, then press the ESC key at startup to the top and then select the appropriate language.

• I try to install Theme Hospital, but I need help :-(incompatibility with 64-bit

  I try to install Theme Hospital, but it says it cannot start or run due to incompatibility with 64-bit windows versions... y at - there a way around this? I REALLY want to play.

  Hello

  always check the compatibility of vista programs on the link below

  and compare it to the 64-bit tab compatibility, not only the 32-bit standard

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• Cannot install Windows 8 on the replacement hard drive

  I got the replacement from Dell hard drive which he said would come with Windows 8 and pre-installed drivers. Well, I installed the hard drive and he said no. OS can be found. I didn't have a chance to make my own backup discs, but Dell sent a CD Windows 8 recovery media with the laptop and now with the replacement hard drive.

  When you try to install Windows 8 on the new hard drive, I get to the part where it tells me to choose a partition to install Windows 8 on and none of them will not let me. There are 5 to choose from and I don't know what to do to get past this. The largest partition either 5A about 934 GB of space left out of 1 TB, but as I said I can't choose it or one of the other ones for the installation.

  You just have to click on next, in any case, despite the message?  Otherwise:

  Start on the DVD of Windows 8, instead of install now, click repair your computer, Advanced Options, invites ... when it opens, type the following:

  DiskPart
  Select disk 0
  clean

  Then, try to install.

  The above will remove all the data partition and disk, allowing you to do a clean install on an empty drive (these scores are not required, and Windows will create its own partitions (two) he needs to install and run).

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• My new build computer runs like a piece of cake on fedora, but when I try to install windows 7 it restarts during installation

  My new build computer runs like a piece of cake on fedora, but when I try to install windows 7 it restarts during Setup after loading files? Configuration
  ZOTAC GE Force GTX 670
  PSU Antec 900 W
  Intel core i7 - 3770 k
  Card Asus P8 Z77 - Mother V PRO
  WD 2 TB hard drive

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• I try to install windows vista professional, but a message that I need a pilot. Where can I find?

  Need professional driver of hard disk for the installation of vista partition.

  I try to install windows vista professional.

  I want to partition the hard drive; However, it says I need a driver.

  Where can I find this driver?

  I have a dell optiplex 360.

  If you still cannot find a BIOS entries to change, try to create a Partition Wizard bootable CD and use it to create a partition.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  J W Stuart: http://www.pagestart.com

• Try to install Windows Defender says "found Windows Client Protection... »

  Problems installing with "Windows Defender"

  While trying to install the 'Windows defenders' program, I was unable to complete the installation when a message popped up saying; "Found Windows Client Protection. Remove this product and return them to the installation to complete the installation. "I checked my computer for a program called"Windows Client Protection", but found nothing. I'm confused. What should I do to install "Windows defenders?

  My operating system is Window XP, Service Pack 3, 32.

  Hi Mitchjr,

  ·          You have databases of security of Microsoft or Windows live OneCare software installed on the computer?

  If you have two Microsoft Security databases or Windows live OneCare software installed on the computer, you will not be able to install Windows defender on the computer. You will need to uninstall them or do not install Windows defender on the computer.

  If you don't have Microsoft Security Essentials or Windows live OneCare software installed on the computer then you will need temporary deactivation of security software installed on the computer and then try to install Windows defender.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• 80070490 error code when you try to install windows vista sp2

  OK JUST LISTEN UP GUYS I REALLY REALLY NEED HELP!

  OK to start with I have a 32-bit with sp1 operating system.
  I need help, try to install windows vista sp2. I tried for ages now to make it work, but I quit so I hope you can help me.

  It comes up with error code 80070490 and it says get help with this error so I click it and it says I have to insert a windows dvd?
  I HAVE A DVD OF WINDOWS, SO IT WON'T WORK

  SOMEONE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ITS REALLY ANNOYING
  

  Hello

  1. who is the antivirus installed on the computer program?

  2. What are the steps you tried to solve the problem?

   
   
   
  Download and install the update the system analysis tool
  80070490 error when you install Windows Vista SP2 or Windows Server 2008 SP2
  http://support.Microsoft.com/kb/976920
   

  Search for the error message in the event viewer.

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

• I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

  error 8007090

  I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

  Hello

  Are you sure this is the error Code?

  And not this one?

  It is the opinion of Microsoft about the error code 80070490.

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

     (http://support.microsoft.com/kb/947821/)

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

  "This has occurred as soon as I updated from Windows XP"

  You have the upgrade DVD?

  Here is a tutorial on how to do it:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.