done, but with errors on page

Similar Questions

• try to download itunes but it said done but with errors

  Im trying to re install itunes, but at the bottom left of the page that it is said in fact but with errors on the page, any help please...

  You can try to contact Google or Apple for assistance.

• I posted a question on Oct. 10 and tried to answer, but got "error on page" so I write again.

  My question was to do a restore operation and I lost the use of the USBs and therefore the mouse.

  I did a scan of the system with Kaspersky Pure and found Trojans. After that, I was finally able to Undo my last restoration, but he always re-did not allow my USB.

  After trying different solutions, I tried again to use "restore to an earlier time", but this time I can't go any further until the day before my "discard" return which is Oct.13.

  I have read suggestions and tried to answer the last 2 pp who took the time to answer (I had already responded to the other 2 responses), but could not.

  The question of Kodak: I tried to create an online album but site Kodak said I should upgrade but it kept failing. I then tried to cancel but couldn't. I removed the Kodak completely and tried to re - install with original disc (I think V3) and who do not have too.

  That's when I decided to do a "restore to previous day" who created the problems mentioned above (due to Trojan)

  I have advanced and registered the dll as suggested and everything worked except regsvr32 /i mshtml.dll, which gave me the message:

  MSHTML was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved.

  So at this point, the computer only works with the keyboard, which is slow ennoyingly, and I still can't use any other USB devices.

  At one point, I had removed a USB card that was installed on one of the PCI slot and reinstalled just now to see what will happen.

  Windows 'seen' the card and a message appears to warn me about the "found USB controller" but not "install successful mssg.

  Is it possible that the problem is hardware related? Maybe a change of motherboard might fix this?

  My system is old enough:

  I'm running a Dell Dimension 2400 (I purchases. back in 2004, I think) I had XP home included and upgraded to XP pro. I'm still all original disks.

  BTW, I also deleted the usbhub.sys, usbport.sys, usbuhci.sys, c:\windows\system32\usbui.dll and c:\windows\system32\hccoin.dll and re-installed a new copy without result.

  If I can't find a solution I just re - install everything from scratch, but I was trying to avoid the drudgery of your time as well as having to track down all the original disks.

  Thanks to all who took the time to help.

  Hello

  You receive an error message or a code during the installation of Kodak?

  Method 1: I suggest that you run the SFC scan and check if there is any problem of integrity of system files:

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 2: I would say as you follow the steps in the link and check if it solves the problem:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Method 3: In order to solve the problem of installation of Kodak I suggest you follow the link below:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• "Error on page" while he was playing msn games online

  OP:msnonlinefreegames, errorpn page
  I recently bought a HP 64-bit with Windowsw 7 computer.  Whenever I try to sign up for Msn games online fre.  I can't BRING simply DOWNLOAD 'ERROR REF PAge'.  What's wrong

  Hi ggmawinton,
  1. don't you get the error only when you play msn games online or with other Web pages as well?
  2 had to play msn games online before with no problems?
  3. what browser do you use?

  The "error on page" or "Completed with error on page" message does not indicate a problem with a local computer. It occurs when an element on a Web page is not correctly built by the creator of the page.
  However, there are many reasons why "Error on page" will occur. For example, you can experience the "Error on page" message when Internet Explorer is unable to read something that is on the web page you are trying to access. If the only sign of a problem is the error message, and Web sites are working, you can probably ignore the error

  The navigation software loads the text, images, animations, and links in the memory (RAM) of your computer. When it encounters something that was not built properly, usually in the Java programming language, it generates the error message.

  In addition, if the problem only occurs on one or two Web pages, it can be a problem with these pages. If you decide to ignore errors, you can disable script debugging.

  Note If this problem occurs on more than one or two sites, do not disable script debugging. Instead, proceed to the next method.

  Method 1:
  To disable notification of every script error in Internet Explorer 8, follow these steps:
  a. open Internet Explorer.
  b. click on the Tools menu, click Internet Options.
  c. on the Advanced tab, click to clear the display a notification of each error in script box and then click OK.
  Method 2:
  Verify that Active Scripting, ActiveX, and Java are not blocked by Internet Explorer. Active scripting, ActiveX, and Java are all involved in shaping the way information displays on a Web page. If they are blocked on your computer, it can disrupt the display of the Web page. Reset the Internet Explorer security settings to ensure that they are not blocked. To do this, follow these steps:
  a. start Internet Explorer.
  b. on the Tools menu, click Internet Options.
  c. in the Internet Options dialog box, click the Security tab.
  d. click on default level.
  e. click OK.
  Note: ActiveX controls and Java programs are disabled in the high security level in Internet Explorer.

  Check out the link for more information below:
  How to fix script errors in Internet Explorer on Windows computers?
  http://support.Microsoft.com/kb/308260
  Kind regards
  Manasa P - Microsoft technical support.

• Hi, I'm changing payment five days ago mi information (I need to change the credit card number), but something happen and appears an error with this announcement page: "error number: PMT_000008" then... What should I do?

  Hi, I'm changing payment five days ago mi information (I need to change the credit card number), but something happen and appears an error with this announcement page: "error number: PMT_000008" then... What should I do?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate also not going anywhere - it's a pc - thank you!

  cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate (since the opening page of CS2) also not going anywhere... it is a pc - thank you!

  message says 'unavailable activation server this time... error code 24:24.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• In fact, I need help but can't find the answer. Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as

  In fact, I need help but can't find the answer.
  Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as empty as when I open Firefox, it automatically load my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
  Thank you.

  [Personal information deleted by the moderator. Please read the guidelines and rules of the Forum, thank you.]

  Hello, please refer to customize the page new tab to turn off the function.

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• Error 0 x 80042318 - I am connected to my network, but with "limited access".

  Although I have installed and am running and using the IE Version 9.0.1600., now, I am unable to do a full full Internet_Connection.  I am connected, but with "Limited access" and consequently, nomatter who HTTP://WWW.Address I try to connect, the page always comes back to the page 'WWW.Blank'.    Any assistance that may be available to be appreciated.  Thank you!...      Other info, are as follows: -.

   

  Product... COM event system.
  Problem... Stopped working
  Date of... 25/04/2011 15:56
  State of... Not registered... Signature of the problem

  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef23d3820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Files helping to describe the problem
  Version.txt... AppCompat.txt... memory.hdmp... minidump.mdmp

  ======================

  Product
  System event COM +.

  Problem
  Stopped working

  Date
  23/04/2011-16:15

  Status
  Not reported

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef2243820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  =============================

  Product
  System event COM +.

  Problem
  Stopped working

  Date
  18/04/2011 12:55

  Status
  Report sent

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef3cd3820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Files helping to describe the problem (some files may be is no longer available)
  Version.txt
  AppCompat.txt
  Memory.HDMP

  Additional information about the problem
  Bucket ID: 215206108 =.

  Product... COM event system.

  Problem... Stopped working

  Date ............... 18/04/2011-19:27

  State of... Report sent

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef3e23820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Additional information about the problem
  Bucket ID: 204865927 =.

  Product
  System event COM +.

  Problem
  Stopped working

  Date
  18/04/2011 12:55

  Status
  Report sent

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe_EventSystem
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791ad84
  Exception offset: 000007fef3cd3820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 98f6
  More information 2: 87675ed52f92c29ca9743f9c4f847526
  Additional information 3: b07c
  Additional information 4: d49704ac1ed176b8d532f7a86e9f442b

  Files helping to describe the problem (some files may be is no longer available)
  Version.txt
  AppCompat.txt
  Memory.HDMP

  Additional information about the problem
  Bucket ID: 215206108 =.

  conduit
  Host process for Windows Services

  Problem
  Stopped working

  Date
  21/04/2011-21:03

  Status
  Not reported

  Signature of the problem
  Problem event name: BEX64
  Application name: svchost.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47919291
  Fault Module name: StackHash_9cfd
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 000007fef2d13820
  Exception code: c0000005
  Data of the exception: 0000000000000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: 9cfd
  More information 2: aea2a0d7a408bfb90d70a40b35741536
  Additional information 3: add1
  Additional information 4: e86fd8f76207b04502fc8a8c6058a723
  =======================================

  Product
  Internet Explorer

  Problem
  Web page display problem

  Date
  20/01/2011 16:30

  Status
  Report sent

  Description
  A display of a webpage caused problem refreshing the page using the Internet Explorer compatibility view.

  Signature of the problem
  Problem event name: MSHTMLLAYOUTHARDASSERT
  AppName: iexplore.exe
  AppVer: 8.00.6001.18702 (longhorn_ie8_rtm (wmbla). 090308-0339)
  ModName: mshtml.dll
  ModVer: 8.00.6001.18702 (longhorn_ie8_rtm (wmbla). 090308-0339)
  Offset: 0x003D6226
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105

  Additional information about the problem
  Bucket ID: 1530749661 =.

  Fault Module name: netprofm.dll_unloaded

  Fault Module Version: 0.0.0.0

  @ Poppyjoe.Joe

  Find out why this module is still used even if he was apparently discharged?   You can use ProcMon or DepedencyWalker to get more clues to this topic.
  Good luck
  Robert Aldwinckle
  ---

• After the reinstallation of Vista (32 bit) I'm done with Windows and most of the stuff on the disk 1 (c), but with stuff on the disk 2 (d).

  original title: after reinstallation of Vista (32 bit), I found myself with Windows and most of the stuff on the disk 1 (c), but with stuff on the disk 2 (d). It's hard to backup.

  I wish all the disk 0, which is 250 GB, leaving the 1 free 500 GB disc to have been the repository of backup and archiving of others.  But I don't want to have to reinstall everything.  I couldn't move bootmgr, BOOTSECT. BAK and 'boot' folder on the disk 1 (c) by somehow the system partition?  Then there would be no OS stuff on disk 0 (D :); back, but better than mixed.)  What happens if I disconnect physically the smallest disk, Startup Repair will make the disc with Windows boot and system partitions? Thank you.

  Hi OldScientist,

  Before performing these steps, it is recommended to make a backup of your important data.

  Step 1: Mark Disk 1 (C) as active partition, then launch Startup Repair

  Follow the steps mentioned in the link below to mark C as active partition

  Mark a partition as active

  http://Windows.Microsoft.com/en-us/Windows-Vista/mark-a-partition-as-active

  Follow the steps mentioned in the link below to launch the Startup Repair tool

  How to use Startup Repair?

  If the problem persists,

  Step 2: Follow the steps mentioned in the article below to rebuild the BCD (Boot Configuration data)

   

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  http://support.Microsoft.com/kb/927391

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install cs6 master collection with serial number, the message is: Impossible to condone this number, but in our account page retrieve number series, everything is correct. Thank you

  I can't install cs6 master collection with serial number, the message is: Impossible to condone this number, but in our account page retrieve numbers series, everything is OK. Thank you

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• I tried to convert a virtual disk in Extensible with vmware-vdiskmanager, but an error...

  Hello

  I tried to convert a virtual disk in Extensible with vmware-vdiskmanager, but an error...

  

  ' Could not convert the drive: the system cannot find the specified file < 0 x 1900000004 >. '

  No idea what lack us.

  I read a few threads on this subject and they say to delete all snapshots. Don't have any as soon as I used the vmrun program to list all snapshots for this virtual machine and it returned 0.

  can someone help me with this?

  Thanks in advance,

  Rui

  It seems that there is typo in the file extensions of the virtual disk, i.e. '.vdmk' instead of 'hard '!

  André

• with the master page "insert current page number" error when you export the book

  Using InDesign CS for Windows 5.5

  Recently updated for InDesign CS (very old one from 2003). I save a copy of all my old files version and kept the old installed ID just in case (after reading all the horror stories on here).

  In my old version of ID, I created a book consisting of some 70 documents. Some of these documents are a single page, while others have multiple pages. In the multiple documents page, I used the "insert... current page number" character (or whatever the command was in the old version) on a page master and formatted as follows, for example: Page 1 of 17, Page 2 of 17, Page 3 of 17, etc. When I exported my book in pdf format, it worked fine. (I is not have to / want page numbers consecutive throughout the book, only in individual documents.) By that I mean my whole book is about 280 pages, but not all of these 280 pages are numbered, only groups of pages in multi-page documents. It is not read page 1-280).

  Am my upgrade to 5.5 a few months ago added some documents in the book, and (if I remember correctly) when I saved the book he asked to convert each document version to the new version, I said OK. When I exported the book in pdf format, some documents that are more than 2 pages are now counted wrong; the numbers are now like this: Page 1 of 17, Page 2 of 17, Page 2 of 17 (supposed to be page 3), Page 2 of 17 (supposed to be page 4), etc. Each page, but page 1 is now page 2 of that either.

  If I open the individual document and export it to PDF, the page numbers work very well. It is only when the document is exported with the book the page numbers to spoil. And it's not all documents in my book; This error starts to a particular document and continues from there throughout the rest of the book, affecting any document more than 2 pages. Documents several pages before that point in the book for export with the correct page numbers.

  I create new documents by performing a "save under" with a previously created document and cut and paste as needed, so I won't have to reformat or implement the page numbers on each new document. I use layers or styles (I do not know there is a better way to do what I need, but I didn't have time to learn the basics, just enough to be functional.)

  My attempts to resolve this problem so far (using version 5.5), tests with the first document where the error: (1) I have removed the document from the book, removed the page number character current insert, back to the current page number character insert, saved, the individual document exported in pdf format and it worked fine. Put it in the book, save, export, and it is bad. (2) I picked up the book document, export the document to .idml, registered as a new .indd new name, exported to PDF and it worked fine. Put it in the book, save, export, and it is bad. (3) I started to the top of my old version of ID, open from the previous version of this document, exported .inx, closed, open the .inx in ID 5.5, registered as a new .indd new name, exported to PDF and it worked fine. Put it in the book, save, export, and it is bad. (4) I moved the document to the top in the order book, put it on a document which correctly numbered pages, saved, exported to PDF and this document was still evil, but one who has been numbered correctly all along is still correct. (5) I compared the settings for this document to others that the number properly and found no difference.

  It's as if the page numbers get hooked on "2" when I export the book, but only in the last two-thirds of the book. Sorry this is so long, but I hope that this description of my problem is understandable. Any advice, other than to go back to my old version documents and start over?

  Thank you for your time and all the information great this forum provides.

  Alice

  Normally, I would say that this kind of problem is symptomatic of the incorrect numbering options in the book panel or an individual document or a bad update of the numbering, and those things are still definitely worth looking at.

  That said, I invite you to go to the original files, export each one to .inx and open those in CS5.5 and save as a new file .indd CS5.5 whose new name, then add them to a whole new book CS5.5. Books are pretty flakey without mixture in the conversion of files, and there are enough bad behvior file conversion directly inherited the .inx route is insurance a little success.

• all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

  all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

• Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Question
  Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Subject: House = without capital letters