dose - anyone know why my computor screen is clear and half as its lower defraging

Similar Questions

• Does anyone know why my computer screen has a blue tint to it?

  I tried the Auto adjust option on the screen itself, but the screen is still blue. Now it has changed to orange! Help!

  Hello

  You can try to reset the default color settings in your graphics chip\card.

• Problem accessing my network on Vista drive when I try to back up the data on my PC... Does anyone know why it ask again me username and password?

  I recently bought an external hard drive Iomega Network home. I've successfully connected to my home network. When I tried to back up the data on my computer on the network drive using backup under system and Maintenance of the Panel, he continues to ask me as user name and password I have no installation. I tried to use my password of the router and several other passwords, but it does not help. I have tried to map the drive to a different drive name and then access, but still it ask again me username and the password. Bottomline, there are user name and password, but still it ask again me one. How to solve this problem?

  Hi fox55

  Thank you for using the Microsoft Answers Forums!

  Try this step and check if it helps to solve your problem:

  Password sharing is turned on.

  Password sharing is enabled by default for computers of working groups. When password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer. There are two ways to enable file or printer sharing:

  Turn off password protected sharing. To turn off password protected sharing, follow these steps:

  2. open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.

  3. under sharing and discovery, click the arrow next to password protected sharing.

  4. click on turn off password protected sharing, and then click on apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. Note: Password sharing is not available on computers that are on a domain.

  Also check this:

  Follow the steps to set password of the credentials under vacuum:

  Create a shortcut to (map) a network drive

  When you create a shortcut to a shared folder or computer on a network (also called mapping a network drive), you can get to it from the computer or the Windows Explorer without having to search or type its network address to each time.

  1. open the computer by clicking the Start button, click computer.

  2. click on map network drive.

  3. in the drive list, click a drive letter.

  4. you can choose any available letter.

  5. in the folder box, type the path of the folder or the computer, or click Browse to search for the folder or computer.

  6. to connect each time that you log on your computer, check Reconnect at logon .

  7. click on Finish.

  Your computer is now connected, or mapped, to the network drive.

  See this link for more information:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-shortcut-to-map-a-network-drive

  Are there deposits in the router that blocks access? If there is, then try to turn it off and check if you can connect to an external hard drive. Go to this link:

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/cd2bfa3a-CEE8-4c38-93fd-608a5ec74b45

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Anyone know why the audio is not working and how I can fix this problem?

  I'm working on a short video for my daughter and I have a few short videos that were sent to my email.  When I download and open, the video is good but has no audio?  Help please. Ive tried everything... I could think of.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows>

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems>

  UTC/GMT is 11:06 on Friday, January 20, 2012

• Anyone know why a picture of stock bought and downloaded adobe usually open on a mac?

  I came to adbobe stock pictures once photos dollar has closed its doors and I credited to Adobe.

  I've selected an image, downloaded but cannot be opened on a mac book pro?

  polite suggestions?

  [Moved from the endorsement, general, all Adobe forums Lounge for a specific product - Mod support forum]

  Simply uncheck "Drivers" of the search tool. Then, you will get no Illustrator file. You will only get .jpgs you can work with in any program, regardless of whether they are Adobe or not.

• Does anyone know why when I run Defender and he finds a Trojan horse, and I try to remove it, it begins to make then after some time the computer stops

  original title: Defender

  Does anyone know why when I run the defender and he finds a Trojan horse, and I try to remove it it starts to do then after some time the computer stops and when I restart it Defender always tells me there is a Trojan horse and the same thing happens when I try to remove it?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please? I can provide screenshots.

  Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?

  I tried to provide screenshots - insert an image does not accept.

  

  

  Just happened while the iMac was asleep.

  Thanks in advance

  Tony

  The image seems to reflect the possibility of problems of graphics processor.

  Some models had a history of failure or bad solder connections. others may

  have a combination of capacitors & other materials; Finally we have to fix.

  https://DuckDuckGo.com/?q=imac + 24 - anomalies graphics + 2008 + in +& t = ffsb

  One of the remedies for a graphics card problem, is a re - weld made by the

  users who have taken their card from the computer & their cooked in the kitchen oven.

  This idea has worked for some; You may be able to contact an authorized Apple

  Service provider or see if any of the parts suppliers in line can answer questions

  availability of replacement given to nine graphics cards, if you were

  can be removed from the logic board or if it is affixed, or welded to the card.

  An iFixit.com repair guide for your series of iMac (Intel-processor 2008) 24 inches

  can show that if that article can be virtually eliminated, if if will show process.

  https://www.iFixit.com/device/iMac_Intel_24%22

  The details of the computer in the bottom of your post isn't an iMac G5 model, and

  There is no powerPC G5 processor equipped Macs after late vintage

  2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches

  and would be a model of Intel. They use a different architecture than G5

  powerPC even though in some respects are similar at least in the General design.

  This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)

  https://www.iFixit.com/device/iMac_G5

  If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.

  Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM

  the Visual problem on the screen; an underlying hardware problem is a likely cause.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  • How to reset the NVRAM on your Mac - Apple Support

  If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:

  Introduced April 2008

  Abandoned March 2009

  IMac8, 1 model identifier

  Model number A1225

  EMC 2211

  MB325LL/A order number

  First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)

  You may be able to find the numbers of reference and research for replacement new or repaired

  old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and

  It failed due to a graphic processor; where she lived the BestBuy did not fix

  She even if it has been purchased by them with their extended warranty; No applecare.

  So, there are some out there in almost perfect condition, but not fixed, always.

  Do not know if the charges involved would be the value relative to the other

  later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}

  Sorry I don't have any new ideas regarding this problem.

• I have the new apple TV, and he had the new user interface.  Friday he returned to the old version of apple TV user interface.  Anyone know why this could have happened

  This is a silly question, but I'm not too tech savvy.  I don't know I have changed something somewhere.  I have the new Apple TV, and he had the new user interface, which means that the appearance of the applications using the applications, example, scroll down to Netflix, Netflix, etc. to research.  This weekend he returned to the UI I've seen on my old Apple TV. Does anyone know why this could have happened and how I me the new interface to return?  I did a reset to the original values Apple TV and it did not work.  The tvOS is 9.1 (13U85).

  Try to understand the issue.

  Do you mean that you have an apple tv4, but he has a home screen display from the older ATV 2/3?  You can attach a screenshot?

  I have never heard of it and don't know how it is possible that they run entirely new software on the ATV4...

• Number keys don't work since the upgrade from vista to windows, anyone know why?

  Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers

  See the following troubleshooting steps below thanks Azam K with Microsoft Support:

  Try to activate the numeric keypad and check if it helps, here are the steps:

  1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.

  2. click onOptions, check thepad box and then clickOK.

  I also suggest you to start the computer using safe mode and check if it works properly, following the steps:

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:

  http://support.Microsoft.com/kb/929135

  If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:

  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Here is an article that will give you information about Scan SFC:
  http://support.Microsoft.com/kb/936212

  I hope this helps!

  OT

  Change options for accessibility on Windows 7
  Control Panel
  l---> ease of access Center
  I---> make the keyboard easier to use
  I---> uncheck "turn on mouse keys.

• I get Red pixels on my images recently, anyone know why?

  Does anyone know why I see these red pixels in the LR develop section? When you export to JPEG red pixels do not exist! This has happened only recently. I checked my display drivers and calibrate my screen but can't seem to stop appearing. She has recently appeared in a lot of pictures. Not aware of any change other than LR updates.

  

  To add to by councils, see the small white triangle at the top right of the screenshot in the upper corner of the histogram? It is white to show that you have enabled the highlight clipping warning.

  Clicking on it will also turn it extinguished/turned on.

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

  I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

  You have to ask Apple why the design has changed. You should still be able to delete songs by changing your selection of synchronization and synchronize.

  Or you can delete songs directly on your iPad and other iOS devices, directly in the music app or via settings > general > storage & use iCloud > storage management > music

• My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

  My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

  The next time you see the flashing light amber...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Express

  If you see a button update, click on update the firmware on the airport

  

  Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

• Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site IM on?

  Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site.
  I have the latest additon of firefox and only noticed this today... so not after I've updated, the name of the site appears if I move the mouse over the tab but it flashes and will not stay there, I can't seem to find a way to get the site back on the tab name... Help please!

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If this isn't the case, maybe an addon intrudes here or there is a problem with hardware acceleration...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Does anyone know why I would double in pictures pictures that vary considerably in size? Who is the likely cause?

  Does anyone know why I would double in pictures pictures that vary considerably in size? Who is the likely cause?

  If you see this by snooping directly in the photo library file, are not!

  Photos is essentially a database program. The one and the only way to manage images in the library is via the interface of Photos, or you will corrupt the database.

  In addition to store the original files (if you do not ckoose to keep a local library optimized), pictures also maintains smaller, miniature to speed up the loading of the different images.