Dot1x client to re-authenticate manually?

Similar Questions

• Client certificate authentication and proxy HTTPS WSA

  Hello

  on a clients site, we have a virtual Proxy WSA with WCCP running behind a firewall of ASA. Only we are facing a problem: the customer has a site that authenticates the client through the certificate. It does not work. If I dasable the transparent proxy for this host, everything works fine.

  I solved it now bypassing the proxy server for the spicific site. Is there another solution to allow clients to authenticate using certificates to a Web site?

  Hello

  Does it means that websites (some sites) request for client certificate to authenticate during the SSL negotiation?

  If this is true, can you check your option since default CLI interface HTTPS when HTTPS servers request certificate of the client during the handshake, WSA will respond with unavailable certificate and the handshake will normally be breaks.

  To check this:

  1. log in to the CLI
  2. control of type advancedproxyconfig
  3. type HTTPS
  4. keep pressing enter to accept the value by default until you reach "measures to be taken when the HTTPS servers request certificate of the client during the handshake:" and change it to "get through the operation.

  5. keep pressing enter until the initial scope guest
  6. type commit to save the change.

• About WLC 4402 LDAP client authentication

  Hello

  I'm install a WLC 4402, the client wants to authenticate users with the LDAP and what he expected to use current users in AD, however

  I just read some documents as reference 'Local EAP authentication server on the Wireless LAN Controller with EAPFAST and LDAP
  Configuration example"and «Web authentication via LDAP on LAN Protocol wireless controllers (WLCs) example Configuration»

  Require both the then to define a new OU and define a new user and select anonymous feature of Bind.

  My question is, should I add all current on AD users on the new ORGANIZATIONAL unit in order to be authenticated as a wireless client?

  I hope that someone of you can clear my doubt

  Kind regards

  Note that LDAP with AD requires no methods EAP-mschapv2. If you can't do PEAP-mschapv2 with AD as LDAP backend. EAP-FAST EAP-FAST (GTC) and no EAP-FAST (mschapv2). It is a limitation due to the way in which AD works in LDAP mode.

  The anonymous bind is not required at all, that it is to be like this in the example. Usually, anonymous bind is not allowed by default on the current version of windows server.

  You are not forced to push all the users in an OU. Simply give a search base DN to the WLC where the WLC can reach all customers on AD. If all your users organizational units are at the root of your domain, you will need to give "DC = domain, DC = com" as base DN and it means that each search will arrive on your entire ad, which isn't super effective. That's all.

  Nicolas

• AAA ipsec vpn clients how to see the history of connection on asdm or asa5510

  Hello all, I would like to know how see history of connection ipsec vpn client users, they authenticate to the local aaa, not in active directory. I am able to see the current logon session. go to monitoring\vpn\vpn statistics\sessions, this shows me sessions underway, but I would like to see for example the connections client vpn for the last month. I did some research and saw the info on aaa Server? I checked that article and does not see what I was looking for.

  It's actually a called (NPS) network policy server microsoft radius server.

  The one I used (ACS 5 and ACS 5) who was just an example.

  You can review the below listed doc

  http://fixingitpro.com/2009/09/08/using-Windows-Server-2008-as-a-RADIUS-server-for-a-Cisco-ASA/

  Jatin kone

  -Does the rate of useful messages-

• Dissociated MAC Client timeout

  G ' Day all,

  Can anyone tell if I am able to change the time it takes for a MAC address is allowed out of the WLC customers dissociated. Clients on the interface page graphic it looks to be about 5 minutes so I think it is 300 seconds as the clock of arp table standard. I would change it if possible.

  Here's why:

  I have a wireless network that uses ISE to the machine authentication and posture of wireless devices. If a customer dissociates and re - partner without going through the entry of the client in the empty manually, WLC NAC agent don't postural again the wireless device.

  This seems to be the entry of the client in the WLC is in a RUNNING State, so if the re-associates, the last known state is RUN, then he joined just the customer upwards and the posture of the NAC is not finished.  This is a reproducible behavior.

  If the customer dissociates and clear manually the customer to enter the WLC, the customer may re-associate and focuses, as expected.

  I need to be able to configure this solution so that whenever the client is associated, regardless of the speed with which he associated after dissociation, the posture of the NAC process occurs.

  Any help is greatly appreciated.

  Thank you.

  JS

  To remove the client from the executing State, the timer of the session or the idle timer expires.  The inactivity timer is usually what happens to expire first.  The default value for the inactivity timer is also 300 seconds.

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• 6.0 ESXi host Active Directory Group authentication works in the hull but no client

  Got a weird here.

  Add 6.0 host vSphere to Active Directory.

  Added a group of pub with the Administrator role.

  I can authenticate with an AD user account that is a member of this group of ads, using SSH or Shell access.

  I cannot authenticate with an account AD who is a member of this group of ads using the Web UI or Client vSphere linking directly to the host.

  If I add the domain user directly with the role of administrator on the host computer permissions, the Web GUI and vSphere Client will be authenticate using the user of the AD.

  What it looks like access using SSH/Shell, vSphere host can burst of belonging to a group and to authenticate, but using the GUI Web or vSphere Client he can't.  There are not a lot of sense to me.

  The hostd.log file has nothing in it which is very informative, just a line saying "status: success accepted password for the user", followed by the event 131: could not connect the user without permission.

  Hello

  If you are in 6.0 Update 2? Then, this article could describe your problem:

  https://KB.VMware.com/kb/2145400

  Please try the fix and let us know if it helps.

  -Andreas

• VCenter 5.5 new install - VCenter not no projection in the Web Client

  Hello

  Today, I installed a new simple installation of 5.5 VCenter Server with all the parts.  I can access the web client very well and it will also authenticate with SSO (even if I don't allow my username anywhere, maybe I'm a domain administrator it allows this?).  Anyway I digress, when registering in the web client VCenter County shows 0 and I am obviously unable to perform all tasks at all.

  Of course, my link between the VCenter server and Webclient went wrong somewhere and I am struggling to see how to solve this problem.  From my research in 5.5 that it should automatically just connect and you don't need to 'register' that we had to do with older versions.

  Any help appreciated.

  Thank you

  Paul

  Hello

  As described in this KB KB VMware: vSphere installation 5.5 Web Client on a Microsoft Windows platform

  Among the vSphere post installation steps Web Client adds SSO identity Source

  Log in to the Web Client vSphere and authenticate using the [email protected] domain to check that the SSO and vSphere Client Web work correctly.

  You can also add an external identity source, such as Open LDAP and Active Directory before deploying the server vCenter Server and inventory Services.

  For more information on the different types of Sources of identity for vSphere 5.5, see him add a vCenter Single Sign-On identity Source section of the Guide of installation and Installation of vSphere.

  
  

  You connect by using the domain ([email protected]) account?

  Have you tried to connect with username [email protected]?

  According to the guidelines of vSphere vSphere 5.5 Documentation Center Documentation

  When an identity source is added, all users can be authenticated but have access no. authorization.

  If you open a session by using the domain account (domain administrators) you might be able to connect, but cannot perform all the tasks that the user is to have access permissions.

  Then you can try to login with the username [email protected] first, then assign permission to your domain account.

  The steps to add the UNIQUE identity Source Authentication (if the ad has not been added) and assign permissions (for the domain account) are described in vSphere Documentation here:

  vSphere 5.5 Documentation - add a vCenter Single Sign-On identity Source

  VSphere 5.5 Documentation Centre - assign permissions in the Web Client vSphere

• In anticipation of the posture with 1.3, Agent NAC 4.9.5.10 ISE and Windows 10

  Hello

  I have a client with the patch 1.3 ISE 5 installed in its network, and it tests the connection to the network from a client Windows 10. In the client, this customer has manually installed Agent NAC 4.9.5.10, and used Anyconnect 4.2.01035 (with NAM module) as supplicant 802.1 x.

  In the ISE, the 3.6.10205 - 2 4.9.5.10 NAC Agent and compliance Module is downloaded and there is that a strategy of commissioning of the customer created in order to provide customers with this version of the NAC Agent and compliance Module if this client authenticates correctly in Active Directory. There is also a political Posture that requires that the customer have a fixed version of McAffee Antivirus from the Posture.

  When connecting to the wifi network, the client authenticates properly using the user name and, after authentication, it launches the Cisco's NAC Agent in order to pass the posture. At this point, the Agent NAC pop-up displays an error indicating that the operating system of the client is not supported, although NACAgent 4.9.5.10 supports Windows 10 and patch5 ISE 1.3 also supports Windows 10. Due status Posture maintains in State waiting, the customer is not allowed to connect with the correct permissions for the network by the ISE authorization policy.

  My questions are:

  You know the reason for this error showed by NAC Agent (client operating system not supported)?

  Do you know what are the correct versions of the NAC and ISE Agent to support customers on Windows 10 connections?

  And also, Windows 10 is supported by ISE 1.3 patch5 or maybe it's better to move to ISE 2.0?

  Thanks in advance

  Concerning

  Juan

  I'll guess that maybe the VA of Cisco and databases supported OS version are not current.  Try to go to the Administration->-> Posture--> updates the settings and click on "Update Now".

• need for WPA2 Personal Mode CLI commands

  I saw this example but I need the CLI generates the GUI. Can anyone help please?

  https://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#pers

  That's what I have to do without the GUI on a 1142N 12.4 running

  Configure in personal Mode

  The term made personal mode refers to products that are tested to be interoperable in mode PSK only of operation for authentication. This mode requires manual configuration of a PSK on the AP and clients. PSK authenticates users via a password or code identification, both the client station and the AP. No server authentication is required. A client can access the network only if the client password matches the AP password. The password also provides the numbers that TKIP or AES uses to generate an encryption key for encrypting data packets.       Personal mode is intended for SOHO environments and is not considered safe for enterprise environments. This section contains the configuration that you need to implement WPA 2 in personal mode.

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hello

  Here are the commands for WPA2 personal mode CLI

  Configure the terminal

  dot11Radio interface 0

  encryption ciphers aes - ccm mode

  or

  encryption mode vlan ciphers aes - ccm< ---="" if="" you="" have="" multiple="">

  output

  dot11 ssid

  open authentication

  authentication-key wpa version2 management

  WPA - psk ascii

  Kind regards

  Madhuri

• vWLC 802.1 x NPS authentication fails

  Hi guys,.

  I hope someone can help me with the following problem, I am confronted with...

  I have a vWLC 7.3 deployed in our HQ site running.

  At Headquarters, we have a deployed W2k8 R2 NPS to works very well for VPN, router and switch authentication

  In a few remote branch offices that are connected to HQ on DMVPN, we have a couple of 3500 flexconnect with local switching mode.

  These AP register very well through the VPN link to the vWLC.

  We have deployed several SSID that is related to groups of AP.

  All SSIDS that use WPA2 with PSK works very well

  Failure of all SSIDS that use WPA2 with 802. 1 x

  The security settings for the default SSID are:

  Policy of WPA2

  WPA2 AES encryption

  Human key 802. 1 x

  AAA server is pointing to the NPS for Auth and accounting right

  Ray crush IF is disabled

  The parameters of the NPS are:

  Conditions:

  Group Win: DOMAIN\Groupxx

  NAS Port Type: Wireless - IEEE 802.11

  Parameters:

  EAP Conf: configured

  Access Perm: granted

  The EAP method: MS PEAP

  AUTH method: EAP

  NAP enforcement: allows full access

  Update not complient: true

  Type of service: Login

  When a laptop (Mac os 10.8) attempts to connect to an SSID 802.1 x it requests a username and passwd.

  Domain\user using + passwd the client tries to authenticate to a couple of times and fails

  On the vWLC I see trap:

  AAA for UserName authentication failure: user user Type: USER WLAN

  I see to the NPS:

  Access denied to user network policy server.

  Contact the server administrator to strategy network for more information.

  User:

  Security ID: domain\user

  Account name: user

  Account domain: DOMAIN

  Fully qualified name of the account: dom.com/OU/OU/OU/USER full name

  Client computer:

  Security ID: NULL SID

  Account name: -.

  Full account name: -.

  OS version: -.

  Called Station identifier: 34-a8-4e-70-0b-90:test.sec

  Calling the Station identifier: 10-40-f3-8f-ac-62

  NAS:

  NAS IPv4 address: IP vWLC

  NAS IPv6 address: -.

  NAS identifier: VWLC001

  NAS Port Type: Wireless - IEEE 802.11

  NAS Port:                              1

  RADIUS client:

  Friendly name of the customer: vWLC001

  IP address of the client: IP vWLC

  Information about authentication:

  Connection request policy name: Windows authentication for all users use

  Network policy name: Cisco WiFi

  Authentication provider: Windows

  The authentication server: Server NPS FQDN

  Authentication type: PEAP

  EAP Type:                              -

  Identifier for account: -.

  Results of logging: Accounting Information was written in the local log file.

  Reason code: 23

  Reason: An error occurred when using the NPS of the EAP (Extensible Authentication) protocol server. Check the logs for errors of the EAP EAP.

  I hope someone can point me in the right direction.

  See you soon,.

  JP

  EAP-PEAP requires a certificate on the side server.

  This certificate is used to construct the SSL tunnel.

  Could please check if the server certificate is installed and valid.

  If the certicate on the NPS is installed properly, you must activate the following debugging

  Debug dot1x aaa

  Debug dot1x events

  Debug dot1x packages

  Use a client to connect to the 802. 1 x active SSID.

  Send debug logs.

  Thank you

  Victor

• Can I replace reminder in the process template engine?

  I'm confused. I guess I can put the SequenceFilePostStep and SequenceFilePostStepRuntimeError callbacks in the process template I use and so replace this engine callback for my sequence of all the files that I run using this process template. What I actually see is that I should create these reminders of engine in each of my sequence files to make them work. Those of the process template is not called. Stack of calls that I have is - - . So, I would keep my engine in one place callbacks instead of many places .

  Hello

  If you want to maintain engine in one place callbacks instead of many places , use ProcessModelPostStep and ProcessModelPostStepRuntimeError in your sequence of process template file. These fires after each step of the sequence of client. TS reference manual table 10-1, "after the engine executes each step in any client.
  sequence of drop calls to process template and each step in calls to subsequence resulting.

  The equivalent of this would be to use the SequenceFilePostStep and reminders of SequenceFilePostStepRuntimeError in all of your files to the client's sequence. BTW if you want a global error handler you can use ProcessModelPostStepRuntimeError and SequenceFilePostStepRuntimeError in your process template. This document will include all the steps in the sequences of process model and the customer test sequences.

  I think that reminders of engine are turned on and off, as opposed to the alternative.

  CC

• Problem during the call to an external web service - CRM 2013

  Hello everyone.

  It's my scenario:

  I do a real-time CRM data integration with other software. I have deployed several plugins, for the most part in messages to create/update, for entities I want to synchronize. The developers of other software gave me the web service endpoint and I created the client using svcutil. Manually, I created the link and gave it to the generated client, as well as the end point. In the events of the first, I could synchronize some records, but I had a few mapping errors. I debugged the plugin, corrected errors, and when I want again to the tests, the plugin is throw me an exception when any method of the web service. Let me explain the problem:

  The exception:

  

  I have instantiated the web service client (passing the binding and endpoint). And when I try to call any method (e.g. Add), it throws the exceptions "InvalidOperationException. I started to debug the code and I noticed that just before calling the web service method, the stills in 'Opening' client state (as you can see in the picture above). Of course that throws the exception.

  { The complete exception is: ' cannot modify the purpose of communication, System.ServiceModel.ChannelFactory'1 [IAxxisWcfServices], although it is in the Opening State. "} System.SystemException {System.InvalidOperationException}

  I did a test, outside the environment of the CRM, on a console application with the same conditions of the customer web services (generation with svcutil manually passing the same binding and endpoint), and the same order, the code of the plugin and everything works well. The State of the customer never stills 'Opening', so I put discarded any problem with the web service.

  Does anyone know if I'm missing something in the code? or some configurations?

  CRM is 2013 on site with the latest updates.

  Thanks in advance.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• WSUS 3.0 SP2 and Windows 7 works only together... "unpublished".

  good then it gives me a bit of a nightmare.

  I have a 2008 r2 with WSUS 3.0 box setup; my vista and xp clients connect with happiness and go about their business update.

  All Windows 7 clients in the Organization have failed. It comes to systems running the same SOE but also covers systems running manual install of Windows 7, this verisons them Professional and windows 7 32 bit Enterprise.

  So it is a big business problem. I first tried all the traditional methods, such as installing manually windows update version 7.4.7600.226 agent on my clients windows 7, I simply get an error message stating "Setup of the Windows Update Agent met with a fatal error.

  I tried to rename c:\Windows\SoftwareDistribution folder, then restart the service of wu. Honestly, I think that this issue is also that as the number of computers, it's also affecting.

  I also tried to manually replace all files windows agent update 7.4.7600.226 on a windows 7 the problem with system. If I look at the WSUS console, he gets the change of 7.3.7600.16385 to 7.4.7600.226 version but it is not help me solve the problem. If I look in my WSUS console I see all XP/VISTA machines are running 7.4.7600.226 and they work perfectly. Windows7 machines ALL running 7.3.7600.16385 and all fail with '8008005' and showing the same problems in windowsupdate.log

  On windows 7 clients if I try manually pushing an update, I get the error code ' 8008005' and in the WSUS console, he continues to show yet to be reported.»

  I have included a summary of a file windowsupdate.log among machines of affect.

  ------------

  2010-07-07 10:04:18:862 900 b60 Misc = logging initialized (build: 7.3.7600.16385, tz: + 0930) =.
  2010-07-07 10:04:18:880 900 b60 Misc = process: C:\Windows\system32\svchost.exe
  2010-07-07 10:04:18:880 900 b60 Misc = Module: c:\windows\system32\wuaueng.dll
  2010-07-07 10:04:18:862 900 b60 Service *.
  2010-07-07 10:04:18:880 900 b60 Service * START * Service: Service startup
  2010-07-07 10:04:18:880 900 b60 Service *.
  2010-07-07 10:04:18:956 900 b60 Agent * WU client version 7.3.7600.16385
  2010-07-07 10:04:18:956 900 b60 Agent * Base Directory: C:\Windows\SoftwareDistribution
  2010-07-07 10:04:18:957 900 b60 Agent * access type: no proxy
  2010-07-07 10:04:18:957 900 b60 Agent * network state: connected
  2010-07-07 10:05:04:111 900 CWERReporter::Init b60 successful report
  2010-07-07 10:05:04:112 900 b60 Agent * Agent: initialization of Windows Update Agent *.
  2010-07-07 10:05:04:112 900 b60 Agent * Agent: initialization of the global parameters cache *.
  2010-07-07 10:05:04:112 900 b60 Agent * WSUS server:http://spcfsv001.contoso.internal
  2010-07-07 10:05:04:112 900 b60 Agent * state WSUS server:http://spcfsv001.contoso.internal
  2010-07-07 10:05:04:112 900 b60 Agent * target group: (Unassigned Computers)
  2010-07-07 10:05:04:112 900 b60 Agent * Windows Update access disabled: No.
  2010-07-07 10:05:04:122 900 b60 DnldMgr Download manager restoring 0 downloads
  2010-07-07 10:05:04:123 900 b60 to THE # to THE: initialization of automatic updates.
  2010-07-07 10:05:04:124 900 b60 to THE timeout parameter next detection at 2010-07-07 00:35:04
  2010-07-07 10:05:04:124 900 b60 to THE # WSUS server:http://spcfsv001.contoso.internal
  2010-07-07 10:05:04:124 900 b60 detection frequency to THE #: 22
  2010-07-07 10:05:04:124 900 b60 to # approval type: on demand (political)
  2010-07-07 10:05:04:124 900 b60 to THE # scheduled install date and time: every day at 17:00
  2010-07-07 10:05:04:124 900 b60 to THE # automatically install minor updates: Yes (user preference)
  2010-07-07 10:05:04:125 900 b60, the phase of installation to THE adjustment to THE planned at 2010-07-07 07:30
  2010-07-07 10:05:04:553 900 b60 report * report: initialization of static data to report *.
  2010-07-07 10:05:04:553 900 b60 report * OS Version = 6.1.7600.0.0.65792
  2010-07-07 10:05:04:553 900 b60 report * OS Product Type = 0 x 00000004
  2010-07-07 10:05:04:590 900 b60 report * computer brand = Gigabyte Technology Co., Ltd..
  2010-07-07 10:05:04:590 900 b60 report * computer model = G31M-ES2C
  2010-07-07 10:05:04:595 900 b60 report * Bios revision = CF
  2010-07-07 10:05:04:595 900 b60 report * name of Bios = BIOS Award Modular v6.00PG
  2010-07-07 10:05:04:595 900 b60 report * the Bios Release Date = 2009-07 - 02 T 00: 00:00
  2010-07-07 10:05:04:595 900 b60 report * locale ID = 3081
  2010-07-07 10:05:04:741 900 AU b60 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:741 900 b60 to THE initialization feature updates
  2010-07-07 10:05:04:741 900 b60 to THE Found set 0 cached updates featured
  2010-07-07 10:05:04:742 900 AU b60 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:742 900 AU b60 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:742 900 b60 to THE delayed finish to initialize
  2010-07-07 10:05:04:743 900 b60 to THE #.
  2010-07-07 10:05:04:743 900 b60 to THE # START # to THE: research updates
  2010-07-07 10:05:04:743 900 b60 to THE #.
  2010-07-07 10:05:04:798 900 AU b60<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2010-07-07 10:05:04:798 900 d94 Agent *.
  2010-07-07 10:05:04:798 900 d94 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:04:798 900 d94 Agent *.
  2010-07-07 10:05:04:798 900 d94 Agent * Online = No; Ignore download priority = No
  2010-07-07 10:05:04:798 900 d94 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2010-07-07 10:05:04:798 900 d94 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
  2010-07-07 10:05:04:798 900 d94 Agent * Search Scope = {Machine}
  2010-07-07 10:05:04:890 900 d94 Agent * found 0 updates day and 0 categories in the search. rules of RCT evaluated 0 out of 0 deployed entities
  2010-07-07 10:05:04:892 900 d94 Agent *.
  2010-07-07 10:05:04:892 900 d94 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:04:892 900 d94 Agent *.
  2010-07-07 10:05:04:892 900 AU d98 > # RETURN # to THE: research updates [CallId = {A8468B2E-C141-44E3-9D88-17395E6367F8}]
  2010-07-07 10:05:04:892 900 d98 at # 0 updates detected
  2010-07-07 10:05:04:892 900 d98 with THE #.
  2010-07-07 10:05:04:892 900 d98 to # END # in THE: research updates [CallId = {A8468B2E-C141-44E3-9D88-17395E6367F8}]
  2010-07-07 10:05:04:892 900 d98 with THE #.
  2010-07-07 10:05:04:892 900 d98-notifications to THE present is disabled.
  2010-07-07 10:05:04:892 900 d98 phase of installation to THE adjustment to THE planned at 2010-07-07 07:30
  2010-07-07 10:05:04:892 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:893 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:04:893 900 b60 to THE #.
  2010-07-07 10:05:04:893 900 b60 to THE # START # to THE: research updates
  2010-07-07 10:05:04:893 900 b60 to THE #.
  2010-07-07 10:05:04:894 900 AU b60<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2010-07-07 10:05:04:894 900 d94 Agent *.
  2010-07-07 10:05:04:894 900 d94 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:04:894 900 d94 Agent *.
  2010-07-07 10:05:04:894 900 d94 Agent * Online = Yes; Ignore download priority = No
  2010-07-07 10:05:04:894 900 d94 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2010-07-07 10:05:04:894 900 d94 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
  2010-07-07 10:05:04:894 900 d94 Agent * Search Scope = {Machine}
  2010-07-07 10:05:04:894 900 d94 Setup looking for agent SelfUpdate
  2010-07-07 10:05:04:895 900 d94 configuration version Client: Core: 7.3.7600.16385 to the: 7.3.7600.16385
  2010-07-07 10:05:04:904 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2010-07-07 10:05:04:940 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:198 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2010-07-07 10:05:07:202 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:240 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2010-07-07 10:05:07:260 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:269 900 d94 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2010-07-07 10:05:07:273 900 d94 Misc Microsoft signed: Yes
  2010-07-07 10:05:07:372 900 d94 Setup determine whether a new configuration manager should be downloaded
  2010-07-07 10:05:07:372 900 d94 Setup Manager SelfUpdate is not found.  It will be downloaded
  2010-07-07 10:05:07:372 900 d94 Setup assessment applicability of the installation package ' ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226;
  2010-07-07 10:05:37:646 900 d94 installation caveat: Cbs StartSession, error = 0 x 80080005
  2010-07-07 10:05:37:646 900 d94 Setup FATAL: assessment of the applicability for installation package "ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 ' has failed, error = 0 x 80080005
  2010-07-07 10:05:37:646 900 d94 Setup FATAL: SelfUpdate check failed, err = 0 x 80080005
  2010-07-07 10:05:37:647 900 d94 Agent * WARNING: jump scan, self-update check returned 0 x 80080005
  2010-07-07 10:05:37:647 900 d94 Agent * WARNING: exit code = 0 x 80080005
  2010-07-07 10:05:37:647 900 d94 Agent *.
  2010-07-07 10:05:37:647 900 d94 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2010-07-07 10:05:37:647 900 d94 Agent *.
  2010-07-07 10:05:37:647 900 d94 Agent WARNING: customer WU didn't search for the update with error 0 x 80080005
  2010-07-07 10:05:37:647 900 AU d98 > # RETURN # to THE: research updates [CallId = {0A71D3FE-B9BC-4B73-B7A2-AC3787D8D9E4}]
  2010-07-07 10:05:37:647 900 d94 report REPORT EVENT: 10:05:04:742 2010-07-07 + 0930 1 202 102 {1E3A0E26-9FB7-42F0-8DA5-99C3D5CCC453} {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates content success installation reboot completed.
  2010-07-07 10:05:37:647 900 d98 to # WARNING: reminder of search failed, result = 0 x 80080005
  2010-07-07 10:05:37:647 900 d98 to # WARNING: could not find updates with error code 80080005
  2010-07-07 10:05:37:647 900 d98 with THE #.
  2010-07-07 10:05:37:647 900 d98 to # END # in THE: research updates [CallId = {0A71D3FE-B9BC-4B73-B7A2-AC3787D8D9E4}]
  2010-07-07 10:05:37:647 900 d98 with THE #.
  2010-07-07 10:05:37:647 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:37:647 900 d98 with THE timeout parameter next detection at 2010-07-07 05:35:37
  2010-07-07 10:05:37:647 900 d98 phase of installation to THE adjustment to THE planned at 2010-07-07 07:30
  2010-07-07 10:05:37:648 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:37:648 900 AU d98 successfully wrote event to THE health state: 0
  2010-07-07 10:05:37:670 900 d94 report CWERReporter finish event management. (00000000)
  2010-07-07 10:05:42:629 900 d94 report REPORT EVENT: 10:05:37:646 2010-07-07 + 0930 1 148 101 {A4993B4F-7329-405D-8435-093B74B867B1} {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate software failure synchronization Client Windows Update not found with error 0 x 80080005.
  2010-07-07 10:05:42:672 900 d94 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2010-07-07 10:05:42:672 900 d94 WER sent report: 7.3.7600.16385 61CA813A-7585-442E-A66B-B0D15CE6BDC0 0 x 80080005 Scan managed 101
  2010-07-07 10:05:42:672 900 d94 report CWERReporter finish event management. (00000000)

  ------

  any suggestions or advice would be so greatly appreciated...

  Thank you all

  Right Church wrong Pew.

  Specific WSUS Forum: http://social.technet.microsoft.com/Forums/en-US/winserverwsus/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• my windows xp computer could not recognize my ATI video card

  I am a representative of Microsoft online. I write on behalf of the client.

  I manually lowered hardware acceleration for my video card.

  I have the right ATI video card on my desk but I can't get the system to recognize it.

  Can you help me.

  Microsoft has my authority to enter into the computer. I can confirm this.

  Brendan Lillis

  Hi Brendan Lillis,

  ·         What is the model number of the video card ATI?

  ·         You receive an error message?

  ·         Very well is the display on the computer?

  I suggest you to check the status of the video card in Device Manager. You can see the article for more information:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Also update the ATI video card on the manufacturing site.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  I hope this helps.