Dotted line on the images

Similar Questions

• How can I get rid of the dotted line on the right side of the frame enclosing

  Since I upgraded to CS5, I seem to have a broken dotted line along the right side of the frame enclosing the png logo that was created for my business.  It did not exist previously. I went back to my original back to the logo and it broke the line is in all versions now.

  When I use the work a single table of edge/dotted line is left to the far right, where it would have been the right vertical line of the bounding box. You can see in the image below on the right.  Its a slight white line but when printed on a banner for its stark white.  The line falls just above the last "A" in Alberta.

  

  I use Illustrator and Photoshop basics and but have trouble when I'm in the problems of this kind.

  Can someone help me understand why its there and how get rid of?

  I'd appreciate any help!

  
  Thank you.

  Probably not without more information.

  The logo is placed above the background color or is the part of the logo background color.

  Are they on the same layer is the effect applied to the logo. Say you that it is png, which program was author in and why is png?

  Tell us more.

• Photosmart HP 7510 - scanning creates lines across the image

  When I try to scan a document, it creates a series of lines across the image in the direction of the scan head.

  Also, the color has a bluish tint, even if it's just a paper white A4 paper.

  Is any ideas - it broken?

  It is basically brand new, just a few weeks.

  Hello

  Please visit the link below to fix the problem

  http://support.HP.com/us-en/document/c02911268

• I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing

  I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing

  Suggest you to reset preferences in Lightroom and then, check out: to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

• Prime Minister 9. I made a mistake when I did drag an audio file in the line of the image. How to remove the audio file. I tried ctrl z and shift delete nothing done.

  Using Adobe Elements 9 first, I made a mistake when I did drag an audio file in the line of the image.

  How can I delete this audio file? I tried ctrl z and shift delete. software has the ' delete the scene and all of the properties in gray. Just "delete scene only" it and it does nothing to remove the audio file.  I had to drag the line from the soundtrack.

  Who can help me?

  LinFos04

  What you wrote, it seems that you are in the scene of Premiere Elements 9.0/9.0.1 workspace.

  Please see screenshot showing you how to remove the audio immediately after you dragged in the film that had been marked "Drag the next clip here"

  

  Moving forward consider working in the workspace of timeline that gives you a better view of what is happening and therefore gives you more control over the flow of work. Please click chronology to watch how this audio present in the workspace of chronology after what you did in the space of the stage line.

  Please let us know if it worked to get rid of the audio unwanted in the Premiere Elements 9.0/9.0.1 workspace sceneline.

  For any question or need more information on the above, please ask.

  Thank you.

  RTA

• Dotted line around the picture frame in the mode of statement of assets.

  In my state the active, I have the button set to open in a new window once above, on which it does. But when I go back to the page, there is a dotted line around the picture frame that doesn't go away. Any help would be greatly appreciated!

  

  Hello

  I believe that you use Firefox to view the site, as this happens only on firefox.

  This is a known problem on their end the selection to the item page remains when we go back to the page.

  Details can be found on this link:

  https://developer.Mozilla.org/en-us/docs/tools/Page_Inspector

  where it is mentioned that they would be taking off this Firefox 29 go.

  Muse we cannot control this, because it is a specific selection of the browser function.

  Thank you

  Sanjit

• How can I remove the dotted lines around the tag?

  If set browser.display.focus_ring_style to zero, I always see the dotted line.
  You can see this problem on this site (when click on the map). But the problem gets more complicated on the other computer everything is normal.

  I see what you mean. There is a pattern once the image has been selected.

• Dotted line showing the lines around some files

  Hello

  I try just on the new indesign CC, and it gives me rushed boxes around images - usuoally our ads, which are converted into TIFF from the PDF file.

  Could someone tell me please how to disable this option?

  Thank you

  If you have the latest version of InDesign CC (9.2), someone could apply a hyperlink to the image. By default, a dotted line shows around a chassis of a hyperlink. To turn it off, choose View > Extras > hide hyperlinks.

• Do the dotted lines of the vector

  Hi guys,.

  I have this file

  Dropbox - finger ok.ai

  I don't know how to do the fingerprint to be as dotted lines?

  Any help or ideas?

  Thank you guys! I really appreciate your help :-)

  Yes, I took out the clipping mask, and then convert the line forms at one track, then used Pathfinder > split clip everything outside the old mask, then I cut the ends of each line with the scissors and removed half of each path. After all that, I applied three different dotted with traits for the different ways to achieve this:

  

• Printing from lightroom leaves lines on the image

  Hi all

  I use an iMac 2009 end using Lightroom 5.5 and printing to a printer canon MG7150 photo.  When I try to print photos (I use Ilford photo paper, but the same result happens with normal paper) I get lines across the printed page.  I played a bit with the created printer (alignment head etc.) and even had a replacement printer but I still get the same problem.  I printed the image of photoshop and the lines were always there, but wider apart so I guess it must be something to do with the parameters of printing or the way lightroom interacts with the printer?  See below for a discussion of the example of one of my shots, the lines can be clearly seen

  I am using Ilford printing the printer specifically for the 6150 MG profile (they don't seem to make one for the 7150) but I get the same results if print it by using the profile managed by printer / lightroom.

  Please help this makes me a little nutso!

  Thank you

  

  I don't think that this has nothing to do with Lightroom. When you go to page layout, you can choose the quality and then choose photo? It seems to me that the printer is trying to print in standard text mode. In addition, I wouldn't say using a profile that seems to be close to what you have for a printer. If the profile is not for your printer, I would not use it.

  Either by the way, I checked with the Red River paper company, and they provide profiles for their paper for the Canon MG7120, but not for your printer model. I'm not familiar with printers Canon MG, so I don't know if your model uses the same technology as the 7120 printhead. If the print head is different so I guess that your printer model does not really support the printer profiles, but that's only a guess.

• Help with the line on the image final after using the magnetic lasso + layers

  I worked on an image that has some distortion of the lens in the.  I need to change the background and the subject separately because the colors are similar and there is simply too much work to do to try and spot heal the whole thing.  I cut out the subject with the lasso, magnetic, and created 2 separate the layers, a topic, a single background.  I then used the layers: adjustment layer: hue / saturation to correct the distortion.  When I did, I flattened the image.  Now I have a gray line on my final image where the lasso tool had cut the image apart.  I have no idea why it's there or how to get rid of.  It is very thin and probably not noticeable on smaller images, but I am determined to blow this up BIG picture where every mistake will be visible.  Any suggestions on how to avoid this line in the first place?  I don't think that I can remove it without going by one pixel.  Thank you!

  A better way to make your adjustments is to simply use the same mask and avoid creating separate layers:

  Here's the original:
  

  1. Select the "subject."
  2. Add a Hue/Saturation layer, which will be automatically hidden from the subject.
  3. Adjust the H/S in function.
  4. Duplicate this layer H/S.
  5. Select the mask of the H/S duplicate layer and press Ctrl + I, which will reverse the colors of mask (which means that the area of "background" will be affected).
  6. Adjust this new H/W layer in function.
  7. Your layers will look like this:
     

  The final image:
  

  No no cutting, no copy, etc. - the mask and its reversal will give a perfect edge.

  Ken

• only first paragraph line around the image

  I work with ID CS5, creating a coumnet for an ePub. When I copy and paste an image into the beginning of a paragraph, only the first line wraps around photography. How can I get the entire paragraph to wrap around the image?

  Your text block is set to ignore the surround...

• Annoying dotted lines in the browser

  Hi all

  I use a HTML Dreamweaver layout with links using a style with CSS unordered list. When I click on the dotted yellow link surrounds the box containing the link in Firefox and IE. How can I get rid of the yellow dotted line?

  Thank you!

  Randy

  Have a look here

  http://CSS-tricks.com/removing-the-dotted-outline/

• I have horizontal lines and the image overlap downstairs in my Sony Bravia LCD KLV32BX320

  I have a Sony BRAVIA LCD TV M no. KLV32BX320. It works well, but yesterday when I was watching TV all of a sudden it appeared a few horizontal lines at the bottom of the screen and there is overlap of the image and color a dysfunction in this area, which is on the underside. I turned off the television and put into service later in the evening, but the problem persists and is still doing today. Help, please.

  Good afternoon!

  Please try the following link in my post. From there, it will provide you with a few troubleshooting steps that you can use to fix the horizontal lines that you get on your screen.

  If my post answered your question, please mark it as "acceptable Solution".

  Thank you for your message.

  http://www.community.Sony.com/T5/television-picture-sound/horizontal-lines-on-the-screen/m-p/100261#...

• straight line of the image

  Hello everyone,

  Can someone help to find a way of how any image to the right. If there is an image whose orientaion is completely out of phase comapred to reference the image so how to the right of the image. IMAQ rotation and symmetry IMAQ may do, but they work manually (you must change the angles yourself) but I want the labview to recognize the image and the right for me. Is this possible. ?  I enclose my VI of base which consists only how directly the image and an image that may explain everything himself. Thanks for help

  Best wishes

  Lazer

  Hello lazer.

  Go to research on your forum of the previous messages, specifically one used:

  http://forums.NI.com/T5/machine-vision/pattern-recognition-for-solar-cells-for-different-sizes/m-p/2...

  The last program you posted ("detect the form 2.vi') sounds like you have an angle that comes out of your cluster of vi IMAQ detect forms . What you want to do to straighten a picture, is to take a reference to the desired shape, you make in this program, see its angle of offset vertical or horizontal, you also exit a function of unbundling by name and then apply this angle to rotate your image in the opposite direction to get it "right". I would take this angle and power in your function IMAQ turn you 'right of the image.vi' and see the results of it there.