straight line of the image

Similar Questions

• Bridge has stopped allowing me to view the photo in a grid of thumbnail images, by showing them that in a straight line through the screen - how can I return to thumbnail grid look a Bridge?

  Bridge does not allow me to view the images in a grid of thumbnails, showing them rather than in a straight line across the screen - how do I find a grid of thumbnails, and what has caused this change after 2 years of use?

  Your workspace to essentially select also redefined and workspace.

  

• Photosmart HP 7510 - scanning creates lines across the image

  When I try to scan a document, it creates a series of lines across the image in the direction of the scan head.

  Also, the color has a bluish tint, even if it's just a paper white A4 paper.

  Is any ideas - it broken?

  It is basically brand new, just a few weeks.

  Hello

  Please visit the link below to fix the problem

  http://support.HP.com/us-en/document/c02911268

• I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing

  I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing

  Suggest you to reset preferences in Lightroom and then, check out: to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

• Touch force constantly removes the gesture and replaces it with a straight line from the starting point to point stylus. Is this a bug? It made impossible delicate designs on iPhone 6 s more.

  More iPhone 6s and Adobe Illustrator drawing

  When establishing, too much pressure removes the gesture and replaces it by a straight line connecting the initial start of the drawing just under the pressure point. This makes delicate drawing impossible. This affects all types of brushes and occurs when you use your finger or the stylus. Deleting the app, reboot the iPhone and reinstalling does not remedy the problem.

  As long as we don't have contact with the screen and varies the pressure beyond a certain point, the gesture will be constantly removed and replaced by a straight line. This issue was present in the previous version, and in the course of December 3 update.

  Carlos,

  Thank you for reporting this issue. We have a fix for this issue will be released soon. Are you interested in helping us test the fix?

  If so, please join the preliminary program of the draw the fate by filling out this short questionnaire.

  https://www.SurveyMonkey.com/r/FTDMDX3

  Sorry for the inconvenience.

  -Draw Will, product manager, Adobe

• Prime Minister 9. I made a mistake when I did drag an audio file in the line of the image. How to remove the audio file. I tried ctrl z and shift delete nothing done.

  Using Adobe Elements 9 first, I made a mistake when I did drag an audio file in the line of the image.

  How can I delete this audio file? I tried ctrl z and shift delete. software has the ' delete the scene and all of the properties in gray. Just "delete scene only" it and it does nothing to remove the audio file.  I had to drag the line from the soundtrack.

  Who can help me?

  LinFos04

  What you wrote, it seems that you are in the scene of Premiere Elements 9.0/9.0.1 workspace.

  Please see screenshot showing you how to remove the audio immediately after you dragged in the film that had been marked "Drag the next clip here"

  

  Moving forward consider working in the workspace of timeline that gives you a better view of what is happening and therefore gives you more control over the flow of work. Please click chronology to watch how this audio present in the workspace of chronology after what you did in the space of the stage line.

  Please let us know if it worked to get rid of the audio unwanted in the Premiere Elements 9.0/9.0.1 workspace sceneline.

  For any question or need more information on the above, please ask.

  Thank you.

  RTA

• Shift-click to create straight lines with the Brush tool is no longer works in 2015 CC

  Hello!

  I feel a maddening thing I can't explain, maybe a bug or a dark environment?

  If I use the pencil tool, I can click on the same spot on the canvas, then releases, then hold SHIFT key and click in another location on the canvas to create a straight line between the two points. This is expected behavior, and Photoshop has done this for years, as long as I can remember.

  Until recently, the same has worked with the Brush tool. Since the upgrade to 2015 CC, however, shift-click on demand exactly as if I was clicking simply - he draws another full brush, but without a straight line connecting the two clicks. Weird.

  
  Everyone knows the same behavior? (CC and Yosemite are completely up to date.)

  
  Best,

  Jason

  

  (this little test of the brush is also to express my emotional state right now.)    : |

  Spacing stops on this special brush?

• Brush in a straight line with the decrease in pressure

  Just past the CC on Mac 10.11 CS6. I used to draw highlights on products using my mouse and the Brush tool. C.; I think I picked a px brush 9 with 50% hardness, clicked then moved the cursor all holding the SHIFT key and click New. I could then draw a straight line, and I think I've adjusted the flow to get the color to start at 100% and cone of 0%.

  I'm now trying to figure out how to accomplish the same thing in CC, but I'm having a hard time to understand.

  Again, it is with a mouse, not a tablet.

  Did had perhaps put opacity to flow to Fade?

  

• How do a straight line of the curve?

  Hello

  I wonder how to move a line to the right a little bit without erasing anything.  How can I move on a bit?  The area that surrounds it may curve a little with it.

  Thank you

  Looks like you could had to use liquefy to move the line, or deformation of the puppet or perspective distortion. Several ways to edit an image and it is difficult to say without seeing a screen shot.

• Professional tool 2015 brush Flash CC attracts only straight lines! THE PREVIOUS SOLUTIONS DO NOT WORK

  Hi, I have a student subscription and have had the intelligence of worse trouble... : Flash. Each time it updates the tool brush stops working and draws only straight lines. I use a dual monitor set up with Windows 8 and a Cintiq 13HD. I tried to change my display settings to 100% which was recommended as a solution - it worked the first time, but no longer works. I reinstalled both Flash (latest version) and my cintiq drivers. It still does not work. I don't see the point of my payment for your subscription if the software does not work! It is totally unacceptable and extremely frustrating when I have to work to deadlines. Please have a specialist contact me immediately and secure it to the

  Kristofer Hey,.

  Thank you very much, but when I tried this, my pen wouldn't work, just the mouse. Anyway, I changed it to what it was before (extended desktop computers) and it seemed to work. I don't know what makes the work because I had not tried before making changes today, but fingers crossed it stays like that!

  See you soon

• Printing from lightroom leaves lines on the image

  Hi all

  I use an iMac 2009 end using Lightroom 5.5 and printing to a printer canon MG7150 photo.  When I try to print photos (I use Ilford photo paper, but the same result happens with normal paper) I get lines across the printed page.  I played a bit with the created printer (alignment head etc.) and even had a replacement printer but I still get the same problem.  I printed the image of photoshop and the lines were always there, but wider apart so I guess it must be something to do with the parameters of printing or the way lightroom interacts with the printer?  See below for a discussion of the example of one of my shots, the lines can be clearly seen

  I am using Ilford printing the printer specifically for the 6150 MG profile (they don't seem to make one for the 7150) but I get the same results if print it by using the profile managed by printer / lightroom.

  Please help this makes me a little nutso!

  Thank you

  

  I don't think that this has nothing to do with Lightroom. When you go to page layout, you can choose the quality and then choose photo? It seems to me that the printer is trying to print in standard text mode. In addition, I wouldn't say using a profile that seems to be close to what you have for a printer. If the profile is not for your printer, I would not use it.

  Either by the way, I checked with the Red River paper company, and they provide profiles for their paper for the Canon MG7120, but not for your printer model. I'm not familiar with printers Canon MG, so I don't know if your model uses the same technology as the 7120 printhead. If the print head is different so I guess that your printer model does not really support the printer profiles, but that's only a guess.

• How to make a straight line with the Quick Selection tool?

  Hi, I'm experimenting with Photoshop CS6 and wanted to autofocus on poles and the alley only, everything is blurry (the sky, cars, trees and higher levels). The image shows a better idea of what I mean. I am currently using the Selection tool quick to fill between the poles, then using fuzzy area, but is at - it a faster and more efficient way to do this? In addition, the quick selection tool is not perfect and shows jagged - like of the spots along the edges of the poles. I thought maybe it's posible to right field line as a box between poles and blurred in this way?

  You would like to use the Polygonal Lasso tool to create your form of selection. Once you use blur filters, this will create a cutting edge on the mask. Select the mask in the layers panel and then apply a Gaussian blur to the mask to smooth the edge. (or use refine edge)

• Help with the line on the image final after using the magnetic lasso + layers

  I worked on an image that has some distortion of the lens in the.  I need to change the background and the subject separately because the colors are similar and there is simply too much work to do to try and spot heal the whole thing.  I cut out the subject with the lasso, magnetic, and created 2 separate the layers, a topic, a single background.  I then used the layers: adjustment layer: hue / saturation to correct the distortion.  When I did, I flattened the image.  Now I have a gray line on my final image where the lasso tool had cut the image apart.  I have no idea why it's there or how to get rid of.  It is very thin and probably not noticeable on smaller images, but I am determined to blow this up BIG picture where every mistake will be visible.  Any suggestions on how to avoid this line in the first place?  I don't think that I can remove it without going by one pixel.  Thank you!

  A better way to make your adjustments is to simply use the same mask and avoid creating separate layers:

  Here's the original:
  

  1. Select the "subject."
  2. Add a Hue/Saturation layer, which will be automatically hidden from the subject.
  3. Adjust the H/S in function.
  4. Duplicate this layer H/S.
  5. Select the mask of the H/S duplicate layer and press Ctrl + I, which will reverse the colors of mask (which means that the area of "background" will be affected).
  6. Adjust this new H/W layer in function.
  7. Your layers will look like this:
     

  The final image:
  

  No no cutting, no copy, etc. - the mask and its reversal will give a perfect edge.

  Ken

• How to specify a length of straight line with the Brush tool

  Hello

  I want to draw a few straight lines that have the same look as the paint brush tool. that is the ends of the lines have rounded ends.

  The thing is, I want to be able to specify the length of these lines.

  (1) can I do this with the paint brush tool? So be specific with the length of the line, for example that I can specify in some fields or something like that?

  (2) otherwise, I use the online tool to look the same as a line of paint brush?

  David.

  Hi David.

  Option 2:

  Select the line Segment tool (shortcut "------"). Click the origin. The dialog box should open. Specify the length. Apply a line with round cap. Adjust the width of the line and color to your liking.

  I hope this helps.

  Peace,

  Lee

• only first paragraph line around the image

  I work with ID CS5, creating a coumnet for an ePub. When I copy and paste an image into the beginning of a paragraph, only the first line wraps around photography. How can I get the entire paragraph to wrap around the image?

  Your text block is set to ignore the surround...