Double click on file as parameter inpurt to vbscript

Similar Questions

• I downloaded the Microsoft compatibility pack. He asks me to double click the File Format Converter.exe file on my hard disk to start the Setup program.

  Original title: could not open the file.

  I received by e-mail a file which I can not open... so I downloaded the Microsoft compatibility pack. He asks me to double click the File Format Converter.exe file on my hard disk to start the Setup program.  I'm not savvy and don't know where to find it!  Your help will be admired.  BF

  Hello, I downloaded myself today and when I read your question, I went looking for him.

  The only place where I found it was prefetch.

  However, I was able to view the file after downloading.

  When I download I always save it to the desktop, then the scanner and then double-click it to install. If you haven't noticed where it was installed, check your temp folder.

  Or download it again and save it to the desktop.

  I hope this helps.

• Double-click .accdb file cannot call ThinApp Microsoft Accesss 2010 but call Access runtime 2010

  Hi all, help me please ^^

  I create MS Access 2010 to problem found ThinApp application double click .accdb file cannot call Microsoft Accesss ThinApp 2010 but called Access runtime 2010 and display the error message
  "A potential security issue has been identified . Warning: it is not possible to determine that this content originated from a trusted source. You must "leave this content disabled unless the content provides a feature critical and do trust its source"

  If double click on Microsoft Access 2010 ThinApp and select open the file can open file is normal.

  Please help share the solution for this problem, thanks a lot.

  Have you registered Access 2010 ThinApp using ThinReg or MSI?

• A double click of files no longer works.

  As I installed Microsoft Office 2011 for Mac on my MacBook Pro, there are a lot of files that I can not open more using double click. I tried to change the double-click settings in the preferences panel, and by assigning a specific application for opening each type of problematic file using the button 'Open with' in the information panel, nothing happens.

  I also tried to restart the computer, and I fixed the permissions of the main HARD drive. None of this has worked.

  What is curious, it's only by double-clicking on a file actually seems to start the application. The application icon bounces for a while, as if she was trying to open. But after seconds of bouncing icon, the icon 'block' is displayed (do not know the exact name of this icon - it's this formidable multicolor spinning I speak). The application icon bounces for a minute or more with the projection of icon "hang" and then the application closes (without any message about some crash) or I use "Force quit" to close.

  At the present time, I have to open the app for files that don't work ( Word files .doc and .docx, Preview for .jpg, .tiff, .png, and .gif files, Safari or another web browser for .html and .url files) to make them work. It goes same for my photo files RAW (.pef), which won't open in Capture One Pro more when you use the double click.

  I have not tried other image far files

  It is, it prevents the newly installed applications to open as well. Today, I tried to open a demo app I downloaded a third party developer (i.e., not Apple), and its icon tossed around for a minute before he quit. I did not yet have the window with the message "you are about to open an app from a [...]', asking if I want to open the file or not.

  Everyone knows about this problem? More important, nobody knows how to fix?

  Any advice would be appreciated. Thank you.

  I tried to find some more information on the issue throughout the day, looking in the forums, websites, etc. I couldn't find anything on this issue.

  I was about to give up, but I decided to reboot once more, just to see if it would change anything. Seems the restart was once again the key to success. Perhaps refreshing memory has been the key to solve the problem.

  Detective Conan, I hope.

• I'm trying to download Flash Player 11.4.402.278. However, when I double-click the file to install it, it does nothing? What can I do?

  I went to the Adobe site to download the latest version of Adobe Flash Player (11.4.402.278). The download was successful. However, when I double-clicked on the file in the download for Firefox, it did nothing. The file security warning dialog box does not appear. I don't know what is happening. Y at - there someone who can help me?

  The download location by default on Windows Vista is the record of downloads, under your user folder. You could try to close Firefox and check there to see if the Flash installation file has been downloaded... If you see it, double-click on the file. If this does not work, try again:

  After you download the file to install Flash on your computer, open the downloads window, right click on the file you downloaded and select "Open containing folder", then take it out of Firefox before running the Flash installation program that you downloaded.

  See Flash Plugin - keep up-to-date and solve the related problems to the title of the update of Flash... There is a link to download the Offline Installer, if the normal download does not work.

• When double click a file to open it, Windows Search Companion starts.

  Original title: how to disable the search function when opening files

  When I double click to open a folder, instead of simply open the folder, the search for windows opens. How can I disable this?

  Hello

  Sorry to hear that.

   

  This problem occurs when you open the Change of the Type of file dialog box for the drive or folder saved file types.

  I suggest you to visit:

  If you double-click on a folder to search companion starts

  http://support.Microsoft.com/kb/321186

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

  I hope this helps. If the problem persists, come back and I'll help you.

• Windows media player not automatically opens a music file by double-clicking the file, but don't open the music file to play if windows media player is already open

  Is there a way to open the music files by double clicking on the music files without having to the open WMP?

  Hello

  -What happens when you double click on the music file? It opens in another program?
  -Don't you make changes to your computer because of which the question began?

  Follow these steps and check if they help.

  Step 1:

  At first I would recommend you change the file association music playing in Windows Media Player and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Step 2:

  Test the issue in a clean boot State.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  Test the issue in a new user account.

• Double-click a file, go to a specific URL

  A file given (for example, an attachment or an element in a window of the Explorer) with a particular extension (which contains data in a format for my own application) I want to double click on it to open a specific URL (www.clevergrids.net23.net) and pass the file (or its content) at this URL, then different methods, it offers execution of the application (for example the launch JNLP, applet).

  I understand how to associate a browser with an extension, but do not want the browser itself to simply open the file; It would obviously not be my application. It is also unsatisfactory pass the file (path) more directly to the application via an execution of orders (.bat).

  You try to program (in a way) and which is beyond the scope of the above Windows forums.  We are not programmers (and if by chance it is actually a programmer or two here, this kind of questions is not addressed).  I don't know if this forum will help (but I think it's the right one), but I would at least begin by the scripts Forum:http://social.technet.microsoft.com/Forums/en-US/ITCG/threads when experts in the scripts will be more that happy to help or, if what you want to do, it's not what they cover, I think they'll have a better idea of the correct forum where you can post.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I am trying to reinstall photoshop elements 10, however, when I upload 2 recommend files for window and try to double-click the file of the application to install. He is still blocked and installation stop repsonding to 92%.

  I am trying to reinstall photoshop elements 10, however when I download the 2 files for windows is recommended and double-click file from application to install. He is still blocked and installation stop repsonding to 92%.

  looking for an incomplete 7z file.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Double-click the file EXCEL (.xlsx) in Windows Explorer tries to open the file in Acrobat

  How to prevent taxpayers who passes and opening in EXCEL as it should?

  Thanks in advance for any response.

  Right-click on the file.
  Select: Open with on the shortcut menu.
  Click: Choose [default] program.
  Select: Excel.
  Check: Always use the selected program to open this type of file.
  Click OK.

• Double click on files and readers in windows explore open Windows Movie Maker

  Whenever I click on the icon of the Recycle Bin on the desktop or in my computer, my documents, control panel in the start menu, or any folder in my computer windows Explorer open Windows Movie Maker. What is going on?

  I would like to uninstall, reboot, then run microsoft registry cleaner.

  Subsequently, use windows without Director until you absolutely need.

  http://www.bing.com/search?q=uninstall+Movie+Maker+Windows+XP&form=MSNH14&QS=as&SK=AS3&PQ=uninstall+Movie+Maker&SP=4&SC=6-21

  http://OneCare.live.com/site/en-us/article/registry_cleaner_why.htm

• WordPad is not opening a .rtf girl when the file is double clicked.

  Windows XP Service pack 3: My Wordpad will directly open a file .rtf given from "Open file" in the Wordpad program but after setting the default file options in the control panel and then double-click the file .rtf even, I get... "the file xx.rtf is not a valid Win32 application."  Any suggestions?

  Hi Ray,

  We will do a right-click on the RTF file and select Open with, select Wordpad and check if you get the error message.
   
  You can also try to define Wordpad as default option "choose default program" and check.

  a. right click on the RTF file, click Open with to choose the program you want.

  b. point to Open withand then click Choose program to choose the program you want.

  c. the Open with dialog box appears. Use one of the following methods to select the program you want to use for this file type:

  d. in the list of programs , click the program you want to use.

  e. click Browse, find and then click the program you want to use, and then click Open.

  f. click look for the appropriate program on the Web to browse the Internet for the program that you want to use.

  g. Click to select the check box for always use the selected program to open this kind of file if it is not selected.

  h. click OK.

  Also check out this link:

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  I hope this helps!

• Double click on attachments causes section turning TH inactive for some big time

  Hi everyone, I had a problem with TH:
  After the section of the open attachments, if you double-click the file through the white space opens to allow you to add other accessories.
  The thing is that, in doing so, e becomes inactive and will open the windows of navigation than after about 30-40 seconds.
  I use 38.0.1 version. Anyone else having the same problem?

  To diagnose problems with Thunderbird, try the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• Can double-click is no longer on a virtual computer after update to Win 8.1 (on the Mac host)

  Hello

  We have VMWare Fusion Version 5.0.3 (1040386) running on a Mac Book Pro (Mountain Lion) with a Windows 8 VM, updated week last through the App Store to 8.1

  We have this problem on all our machines:

  1 open Windows Explorer, navigate to any 'virtual' folder (ie. a folder which is actually pointing to a folder on the Mac, for example My Documents).

  
  2. you can see everything, but you can't do anything with it. For example, double-click a file to open it and the application (for example, Notepad, Excel, whatever) does not start. The workaround, it is that you have to go to the physical folder on the Mac and open the file, then it will open the appropriate application of the virtual machine (and the file opens in the application). On VM Win8, it wasn't necessary, it has worked well for the virtual machine.

  3. you double-click any subfolder to open it either, you can never see the top level of the virtual machine.

  It seems that the behaviour of 'double click' is broken.

  Any ideas?

  Thank you
  

  OK, the solution to this problem is not double click, but sharing folders. VMware tools needs to be completely ONE installed, restart the virtual machine, and then reinstall the VMware tools.

  I also had to change the registry settings in Windows for VMWare tools first, because otherwise it could not be uninstalled.

  The steps to edit the registry are in this thread, the Zypher response:

  https://communities.VMware.com/thread/460232

  Changes to the registry, then select Virtual Machine in Fusion, the menu reinstall. This will cause the Tools CD-ROM mounted in the virtual machine (Windows 8.1 in my case). Ignore the guests that appear and instead, open Control Panel and choose to uninstall VMWare Tools. You must restart the virtual machine later. After the reboot, new Virtual Machine in Fusion menu goto and now select "install VMware Tools". You will need to logoff the VM at the end and reconnect again.

• How can I make double click to single click to open files?

  How can I make double click to single click to open files?

  See:

  • http://www.SevenForums.com/tutorials/10117-single-click-double-click-Open-item.html