Double-passing the path to LV
Hi, I have to spend some trail of TS to LV I've always used the double slash. Is possible to use only one '-'? If I do the chain gets LV is different from the original. I know that the "------" is a special character and behaviour varies according to the next character.
Thank you all
Not sure why you ask for what you already know the answer.
I surpose you could send a U8 array instead of a string, then in LabVIEW convert your array into a string.
Tags: NI Software
Similar Questions
-
How to pass the parameters or values film double hollow?
Hello
I create a game in Flash 8 with 2 AS and I have some questions to ask.
First of all, I'm stuck for 2 days to create a tower Laser beam to the target.
I searched the internet for solutions but I can't really find one, so I'll try display of questions myself...
First I tried to create, and the effectHolder in which each laser beam has been created, because it seems I can create only one line in each movieClip...
_root.duplicateMovie(effectHolder_mc , "effectHolder_" + this, _root.getNextHighestDepth());
v = a = _root["effectHolder_" + this];
ray.onEnterFrame = function()
{
v.clear();
v.lineStyle(1,0xFF0000,100);
v.moveTo(this._x, this._y);
v.lineTo(creep._x , creep._y);
v.text = "True"}
It's triggered eveytime, she was a target.
With each turn that triggered a laser that I created, it became more than offset, so I tried selfdestructing after some time.
this._alpha -= 10;
if (this._alpha <= 0)
{
this.removeMovieClip();
}
But he did not actually work, so I tried another solution. I tried to give each MovieClip ("Laser"), duplicate code that creates the laser beam.
onClipEvent(load)
{
this.fx = from._x;
this.fy = from._y;
this.tx = to._x;
this.ty = to._y;
}
onClipEvent(enterframe)
{
_root.dmg.text = "From: " + fx + "," + fy + " To: " + tx + "," + ty; //I used this on a textbox to see if parameters are transmited. But they were all 'undefined'this.clear();
this.lineStyle(1,0xFF0000,100);
this.moveTo(from._x, from._y);
this.lineTo(to._x , to._y);
this._alpha -= 4;
if (this._alpha <= 0)
{
this.removeMovieClip();
}
}The problem is that I did not know how to pass the coordinates of the tower and the target to the MovieClip so that it knows where to create the line.
X++;
duplicateMovieClip(_root.Laser, "Laser" + X, X,{from._x,from._y,to._x,to._y});
g = _root[_root.Laser + X];
g.fx = from._x;
g.fy = from._y;
g.tx = to._x;
g.ty = to._y;Please leave suggestions on how to send the parameters or values for the created clip, or an idea of the creation of this line ("beam") for each tower, without so much trolling.
Thank you
Chris
What is the trigger of v's _alpha decrease?
-
What is the path hidden pictures on a macbook pro?
What is the path hidden pictures on a macbook pro? I want to look at the structure of files and compare the list of photos to remove duplicates.
/ Users/Myusername/images/Photos\ Library\ 2. photoslibrary?
~/Library/?
Thanks for any help.
If you try to delete the duplicates by deleting files directly in the package of the photo library you will damage the photo library.
Photography shops photos within a structure of database and the objects are distributed everywhere. There is no way tor record delete a single picture using the Finder.
The photo library is a set, a folder with subfolders and data bases. For a single photo that you import pictures will store the original image file in a subfolder 'Masters' (~/Pictures/Photos Library.photoslibrary/Masters/) or in iCloud, according to your settings. It will create an additional stamp file, files with faces found thumbnails and previews in the folder found, to share with other applications in the media browser. Always use Photos interface to remove the photos or the library will become inconsistent.
You can look inside the set of files grouped by ctrl-clicking on the library and using the command 'Show Package Contents': but make sure you do not move the files.
To remove duplicates consider using a double Finder program:
These applications are compatible with Photos and safe to use:
- Powerphotos: fat cat Software
- Duplicate Annihilator: propaganda Brattoo Software - products
- PhotoSweeper: http://overmacs.com/photosweeper.html
If you have duplicates of a different pixel size in your library as well, then consider Photo Sweeper. We can compare the histograms or bitmaps from photos, so you can detect duplicates as well edited. In addition, you can set up rules assigned to photos to keep and which to dispose, for example to give preference to more recent photos, photos with the largest size of pixel or photos with metadata.
PowerPhotos is a great tool to have, when you work in Photos for navigation of several libraries of Photos at once and to see the photos annotated with metadata. It can move photos between libraries and help you merge libraries. But the duplicate detection is not as versatile as in Photo Sweeper. It can detect mainly exact replica.
I don't know much Duplicate Annihilator, so I can't say how it will compare to the other two.
-
How to pass the Visa Resource Name parameter to labview dll in labwindows/cvi
Hello world
I build a dll of labview, the prototype is: double getchannelpower (double f, uintptr_t * VISAResourceName);
I don't know how to go from VISAResourceName to this function.
Is it related to the ViPSession paremeter in function viOpen(REES ViSession, rn ViRsrc, ViAccessMode am, ViUInt32 ti,ViPSession vi)?
BRs,
lotusky
Hey, guys:
I figured out how to pass the parameter.
In labview, you must replace the control of visa with string control. In this way, the generated dll function at the entrance of the string type.
I hope this will help others!
lotusky
-
How to set the path of the report in a plugin for model
I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.
Thank you.
If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.
If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.
You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).
-
LaunchExecutableEx() returns not - 4 when the path of the exe is not found
LaunchExecutableEx() does not return an error event (or - 3-4) while there is no such thing as the path to the file on the PC I am runing the application on. It returns 0 (as if the exe has succeeded).
Thank you
Mira
The example works. I thing that I understand the problem.
I go to the LaunchExecutable is not the right path of the exe. I pass java-jar + path of the exe path to XML format. All LaunchExecutableEx knows is that he has launched java-jar (where it returns 0). Path to the java executable is not relevant to LaunchExecutableEx.
I guess I'll have to do something else before the call to LaunchExecutableEx to verify executable java and XML are present.
-
How to use the path generated by a star to guide the robot to move?
I now know how to use a star planning on Voronoi path and I can run this program successfully. \
However, my problem now is how I can use the path data (generated by the planning algorithm * path) to guide the robot rolling along this path? Well, I guess I can get a set of points (denoted by x and there contact information) of the path and use those points to guide the robot?
can someone please help?
Thank you very much
You must only post the question once.
-
How to call sequence into LabVIEW, by providing the path of the sequence files.
Hello
Please give me a solution for call sequence from the API ActiveX LabVIEW file by entering the path of the LabVIEW user interface sequence.
Thank you
Wherry
Here is a link I gave some pointers on how to run a file opened via Single Pass sequence.
How are you going to start this sequence is the user who selects the sequence on the disk? Is already open in a SequenceViewMgr control?
An operator interface would be more applicable to your situation?
Thank you
PH
-
Open the path to reference LV2009 new syntax?
Hello
I just changed my LabVIEW 2009 and I have some new problems with open vi reference function. My app uses a lot of Dynamics called vi and some sub-panels too. It works well in the programming system, but not when compiled into a stand-alone executable file (which was not the case in 8.6.1). I found that disorders come roads feeding open vi reference function. Looks like that now it use more full path, including the name of the project or library name... Where can I find the exact syntax to use in these two cases (always for a stand-alone executable):
-create a reference for the screws that are registered as .vi on disk.
-create a reference for the vi are encapsulated (using the build properties) in the application .exe file.Thank you
Vincent,
Please read the following compositions of the help of LabVIEW 2009 "LabVIEW 2009 features and changes" section:
LabVIEW Application Builder Enhancements
LabVIEW 2009 includes the following improvements to the LabVIEW Application Builder, which you can access by double-clicking specifications to build in the Project Explorer window and selecting the type of distribution in the context menu that you want to create:- The Application Builder won't screw with filenames in conflict outside the stand-alone applications, shared libraries, or Web services for the construction specifications that you create in LabVIEW 2009. In LabVIEW 8.6 and earlier versions, the Application Builder saves files library and screw in a simple list in the application and records the screw with names of conflicting outside of the application files in separate directories.
- If you build a stand-alone application or library shared by using LabVIEW 2009, the Application Builder stores within the application source files using a layout similar to the directory structure of the source files on the disc. For example, the following table lists the relative paths for a first level VI, foo.vi, which calls a.i and b.vi. C:\.. \Application.exe represents the path to the application.
Path to the source files path to application files
C:\Source\foo.VI C:\... \Application.exe\foo.VI
C:\Source\xxx\a.VI C:\... \Application.exe\xxx\a.VI
C:\Source\yyy\b.VI C:\... \Application.exe\yyy\b.VITo use the legacy file available, place a check in the box use LabVIEW 8.x file layout in the Advanced page of the Application Properties dialog boxes, shared library properties and properties of the Web Service. LabVIEW allows this option by default for the construction specifications that you load a previous version of LabVIEW.
- (Windows) Specifying build .NET interop assembly allows to create and distribute screws in a LabVIEW project as a .NET interop assemblies. Right click on specifications of generation in the Project Explorer window and select new' Interop Assembly .NET in the context menu to display the .NET Interop Assembly Properties dialog box.
- Allows the Application to build in the VI dialog box allows you to build an application from the VI you are currently changing.
hope this helps,
Norbert
-
The application's command line arguments get the path to the file in windows Explorer
Hello
I am trying to open a file with my labview application .exe, so I thought that windows was sending the file path double clicked in Explorer solutions in the form of argument, but all I get is the name of my exe file.
Does anyone know how to set up windows or the application to get the double click path from the Explorer, which has the file extension has already been associated with my exe?
Thank you!
I'm not sure I understand, but I think you want your Labview program to open another file, as a file of perimeter?
Have three basic choices.
Hardcode the path with file name in your program http://zone.ni.com/reference/en-XX/help/371361K-01/glang/path_constant/
Use the file open vi and for the user to select the file to open http://zone.ni.com/reference/en-XX/help/371361J-01/glang/file_dialog/
Write your program to accept a http://digital.ni.com/public.nsf/allkb/17C3AD70493CE0208625666A00763364 command line argument
-
So, I went out and bought the USB on the gateway site to restore this laptop again and when I tried to do, he says recovery failed - could not find the path of the image M:/RecoveryImage/install.wim.
I contacted support and they issued me a replacement USB drive, I get the same failure.
I diagnosed the HARD drive and it passes. I used diskpart to 'clean up' the disk drive HARD all nothing doesn't.
[Under the direction of privacy] order number
What gives?
Acupro1,
I you sent a PM with respect to research purposes.
-
Outlook Express 6 when you pass the preview pane of mail identities is empty
I use Outlook Express 6 with 2 identities. I use these identities for months. Now, when I pass the identity I open with, I see the list of e-mail messages, but when I click on one, the preview pane is empty and if I double click to open the message sound Blanck.
I could solve the problem for a while out of Outlook Express and then restarting it. It would work for a while then the cutting would begin.
Now, the only way I can switch back and still see the content of the email is to change the identity of the program starts by, close the program and restart.
I haven't added something new to my computer or upgrade any software recently that the normal microsoft updates coming automatically.
I searched the forums and didn't find that particular problem.
Any ideas are appreciated.
Hello
I recommend you download & install Windows Live Mail & check if the problem persists.
Windows Live Mail for Windows XP
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?
It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works nowand I need my computer quite urgent for the University.Thank you very much!Hello
No saving necessary data and re-installing Windows Vista might be the best option, but here
are a few others.You can save your files by putting the drive in another computer as a 2nd disk (best) or external
Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
Of course a real store of the computer or the manufacturer of your system can help to recover the files.Or you can use a boot Ubuntu CD to back up data.
Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer--------------------------------------------------------------
You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.First check this thread in case it is simple and if not to come back to this thread.
Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a Vista disk? You can try restoring the system to it. If you don't have the disks your
system manufacturer will sell them at low prices. Or try in safe mode if you can get there.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can create a recovery disc or use someone even version (making the system restore it)
must be bootable).How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html------------------------------------------------
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQIVista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI-----------------------------------------------
If necessary and you can access all ordinary Windows.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
(if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.You can use another DVD that aren't copy protected but you you need to own
Product key.On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(a line type or copy and paste one line at a time and hit enter - enter a bracket)
or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)
RESTART Windows
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Retrieve the bytes of the image of the path of the image file
Hello
I was unable to find a post that details how to retrieve the bytes of the image of an image (given the path to the file of the image on the device). Basically, using the FilePicker, I'm able to get the path of an image chosen by the user:
There you go:
Pass just your file as method parameter name.
public static byte[] getBytesFromFile(String filename) throws IOException { FileConnection fconn = null; InputStream is = null; try { fconn = (FileConnection) Connector.open(filename, Connector.READ); is = fconn.openInputStream(); return IOUtilities.streamToBytes(is); } finally { if (is != null) { is.close(); } if (fconn != null) { fconn.close(); } } }
-
RMAN duplicate grave crashes when I'm trying to change the paths of the destination
Hello community,
I am trying to duplicate a database of PROD for a test environment using the basic backup technique. I test the script in double and everything works fine when the paths of the database "auxiliary" (the database that I am creating) have the same paths as the basis of the 'target' (the database of production). If I change the paths, the double has failed because it does not find a backup of controlfile:
channel ch1: from the restore backup set data file
channel ch1: restore the control file
channel ch1: reading of the backup piece PROD_cf_c-2175092736-20151204-0 c
channel ch1: ORA-19870: error when restoring backup piece PROD_cf_c-2175092736-20151204-0 c
«"ORA-19507: failed to retrieve the sequential file, handle ="PROD_cf_c-2175092736-20151204-0 c", parms ="»
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: error received from layer media manager, error text:
< PROD_cf_c-2175092736-20151204-0 c > backup file not found in the NetBackup catalog
This is the script that works, but if I have the same structure of directories in PROD and TEST (but this isn't a real scenario):
run
{
allocate auxiliary channel ch1 device type sbt;
Send "NB_ORA_CLIENT = xxx NB_ORA_POLICY = xxx, NB_ORA_SCHED = Full_Diario';"
duplicate database for TEST PROD
until 'sysdate-2/24.
NOFILENAMECHECK;
output channel ch1.
}
And this is the script that it does not work because I have the PROD and TEST different directory structure
run
{
allocate auxiliary channel ch1 device type sbt;
Send "NB_ORA_CLIENT = xxx NB_ORA_POLICY = xxx, NB_ORA_SCHED = Full_Diario';"
duplicate database for TEST PROD
until 'sysdate-2/24.
SPFile
control_files value ' / TEST/orabd1/ctl/control_PROD_01.ctl','/TEST/oralog1/ctl/control_PROD_02.ctl','/TEST/oralog2/ctl/control_PROD_03.ctl '
db_file_name_convert value "/ PROD /", "/ TEST / '.
the value log_file_name_convert "/ PROD /", "/ TEST / '.
core_dump_dest value "/ TEST/oralog1/cdump".
the value 'TEST' db_name
Set diagnostic_dest ' /TEST/oralog2'
instance_name must bring 'TEST'.
all local_listener 'LISTENER_TEST '.
Set log_archive_dest_1 ' LOCATION = / TEST/arch.
the value of log_archive_dest_2 'LOCATION = NULL'
;
output channel ch1.
}
I tried to restore a Netbackup file and it works. I try to duplicate a database when the structures of directories are identical and it works. Why it's a failure when I change the destination paths?
Thank you!
Marina.
Hello
We had a similar problem in our shop. In our case, that we never knew if she was related to Oracle or NetBackup, but we found a Bug of Oracle, so we think it was a problem with the Oracle.
Bug 11783792 RMAN SEND command does not hold the value of the variable
Rather than send 'NB_ORA_CLIENT = DCLI, NB_ORA_POLICY is BD_DC_2, NB_ORA_SCHED = Full_Diario';.
try something like this:
Run {}
allocate channels ch01 type 'sbt_tape' PARMS 'ENV =(NB_ORA_CLIENT=DCLI) ";
Send "NB_ORA_SERV =
';" Restore settings
output channel ch01.
}
Let me know if it helps.
Kind regards
Ferran
Maybe you are looking for
-
can I use a Time Machine backup on another mac?
Can I use my backup Time Machine for a Mac Mini on a 2nd Mac Mini?
-
Export spreadsheet Numbers to Excel removes the functions
I opened an Excel file with numbers 3.6.1. It works fine; all my data and my imported correctly formulas and the spreadsheet works fine. However, when I then export the document in Excel, the data appear in the result Excellent document, but the ce
-
my tool bar will not open when I press alt and then only the line superior
the complete upper toolbar is not visible on any web page. to use the file print history or a bookmark, I have to press ALT line superior then disappears when choosing a Web site. Then I have to repeat this step for each choice of bookmark.
-
I get the error that my firewall setting prevents my printer to communicate so I can't print. Someone at - he ever heard of this before? Thank you very much.
-
error 0x80072efd receiver code and tell me as my connection port is not configured...? I can't access the internet on computer hard to dl update or google the problem and corrections.