Double screen in Cisco Telepresence SX20

Similar Questions

• Cisco telepresence sx20

  Dear support team,

  I want to know how to configure cisco telepresence sx20.

  any body can help pls...

  Configuration Cisco Telepresence Sx20 is not easy to do. I think below link will help you for configuration.

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/quick-set-SX20/TC5/administrator_guide/sx20_quickset_administrator_guide_tc51.PDF

• Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015

  Nice day! My name is Dimitri! Have Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015. Is it possible to set up a conference call SFB and appeal to all subscribers of this conference? At present, we can only call on a single client and SFB. We have the current version of the software TCNC5.1.4.295090 SX20 - is it possible he obnoviti 7, and it will help to improve the situation? Thank you!

  I'm no expert on this technology, but I have some idea and already deployed some projects dealing with the integration of Cisco (CUCM, VCS) video infrastructure to Microsoft video infra like Lync. It would be the same process to make it work in your case.

  How does your deployed SFB? How do you do a conference for audio and video, participants can join the conference by dialing?

  • Mediation server would be required as a front-end server for you to integrate IP/PBXS using SIP trunk to enable voice (audio) Conference with the participants to the PSTN.
  • AVMCU Should be (Audio video Multipoint Conferencing Unit) will host the video conference that will include video endpoints as participants.
  • Video of Interop (SCREW) Server would be required to interface your SFB to third video conference infrastructure such as Cisco UCM or VCS for the endpoints Cisco call client SFB of endpoint of Cisco to participate to the conference organised on SFB by dialing the conference number.

  I'd say contact your AM SFB or Support as well for queries about how to plan your infrastructure SFB and direction.

  Kind regards

  Acevirgil

• Cisco TelePresence SX20 with laptop

  I use a Cisco TelePresence as autonomous SX20 endpoint configured with a public IP address (in Pakistan). I want to connect a portable computer (to Canada) to start video conferencing using the portable camera. Please advice me the software to install on the laptop so that I can start with my SX20 videoconferencing based on IP configured on my SX20.

  To understand kindly refer to the disposal of partner network.

  Please help me its urgent.

  Hello

  www.ciscojabbervideo.com

  BR Oleksandr

• Cisco Telepresence SX20 and Touch 8 Configuration after paired

  Hello

  I successfully connected and combined the SX20 Cisco's Telepresence and Cisco Telepresence Touch 8. Before using the 8 key, we used the remote control instead. As a result, I have two questions about this.

  1. as far as I know, when I use the 8 key, the remote control cannot be used. Is it possible to use both of them?

  2. How can I change the background of my SX20 touch 8? Previously, the remote I can easily choose the background for my SX20. But after pairing with Touch 8, background in my SX20 become a blue large clock. I really want to have a different background but cannot find the way how to change.

  Any help would be appreciated.

  Thank you.

  Sincerely,

  Bagus Hanindhito

  After you connect the 8 Touch, you can still use the remote control, you will need to put on the SX20:

  SystemUnit MenuType experimental configuration: full

  I think that the standard background when using a touchscreen device is what you see, blue with large clock.  However, after the MenuType return in full which will give you the full OSD which is used with the remote and not that of the button, you may be able to change the background then.

• On Cisco telepresence SX20

  Hi telepresence Experts.

  When I connect my laptop with the sx20 and click on 'call tab control' a message presented in the two screens of the laptop. The message is "Snapshots require the option RemoteMonitoring key. Would you tell me the reason and function of 'Ctrl tab call' please...

  Thanks in advance.

  Concerning

  Nizam

  Suggest you take a look at the admin guide - page 10 shows you from everything about the web interface.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Cisco Telepresence SX20 H323 autonomous "no video call.

  This system can receive calls IP to external systems. But when I dial to test outgoing calls (IP calls) see the other side of the call to come and he received but no video/audio on their side. On the side of the appellant, I receive the following message if poster on the screen "no video in" then the call ends. The only messages in the log are below.

  Log messages:

  WARNING: Default call Protocol

  The default call protocol is set to H323, but the system is not registered on this Protocol. The system isn't able to make all the calls. Please change the default call Protocol, verify that Protocol is enabled, or check the configuration of H323.

  Caution: setting up an IPv6 address

  The IPv6 address configuration is statically defined for an invalid address (or mask, gateway or subnet). Enable the DHCP, or enter a valid static IPv6 assignment

  Oh yes, whenever you deal with video, any type of inspection of the firewall must be disabled because it could cause a delay or simply no video sent/received.

• Integration of the Cisco Telepresence SX20 with Cisco Telepresence EX60

  Hi all

  I have a question, I have the following device:

  -SX20 together

  -EX60 with touchscreen controller

  Do I know if the EX60 can be deployed in an environment SX20? as each of them as functions of call I don't know if it will be in conflict or not because I have little knowledge about the voice and video. If the device can be integrated, can I request a deployment guide, the configuration guide on these? Thank you very much!

  If your devices are not connected to any call (VCS or CUCM) control, search for SX20 autonomous in the forums - there are many threads that describe what you need to configure the settings.  Do the same configuration on the SX and exodus once this is done, you should be able to call the IP address of one of the other.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Ways to receive calls from address book on Cisco Telepresence SX20?

  I got many unknown calls on my teleconferencing equipment and I would like to know if there are ways to block these calls or even perhaps only to receive calls on the address book.

  This has been discussed before in the forums many times more.  Take a look at some of the following threads:

  • nuisance-h323-call-sx20
  • Ghost-calls-tandberg e20
  • sourceh323idcisco-incomingcalls
  • VCS-sip-abuse-reported

  If your endpoint has a public IP address, depending on the configuration of endpoint, you could get behind a NAT device or restrict access of your firewall to allow only specific IP addresses this conference you with.  If you use H323, you must also disable SIP endpoint.

• Configure Cisco Telepresence SX20 to use H323

  The engineer back a configuration a model for this unit. Because SIP is not used by the seller which we will be conferences with I have to configure this device in the call manager to use H323. Can someone guide me where in Call Manager I can install this device to use the H323 Protocol.

  CUCM is SIP only, if you need make a H323 call. You will need to either Setup of endpoint without CUCM self-sustaining, as Acevirgil mentioned, however it isn't bigger than its configuration already with CUCM. The other alternative is if you have a VCS or highway, or of those who can ensure Interworking using SIP to H323 and vice versa.

  Do you know why the other side can't H323, is there a way to ensure the interoperability of H333-SIP calls?

• Double screen Enquiry

  I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?

  philiom wrote:
  

  I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?

  The only upgrade to the video that you can install is a PCI Express x 1 video card with two video.  The card must be a low-profile PCI Express x 1 video card (with 512 MB or less VRAM) that there is no PCI Express x 16 slots on the motherboard. For a card with VRAM than an upgrade of the power supply must be considered as your original power supply is only 180W. Who does not have capacity to a level that will attract a lot of current.

  Best regards
  ERICO

• t5570e double screen RDP?

  Working for a client where I set up a server 2008R2 in RDS mode.  Bought 2 t5570e due to one of the users who need both screens.

  The user one screen, it's obvious: Configure an rdp session at startup; When they turn on the morning, the default standard user connects, starts the rdp session, the user connects as themselves, bingo: Office full win7.  Simple.

  Two screens, but... not so simple.

  So: how to set up the double screen of rdp on the thin client? Do I need a dual video card display in the server?

  Well... that was easy. :-)

  mstsc.exe/span

  Fact. :-)

• T500, double screen, Windows Server 2008 R2

  Hello

  Been looking around, but has not found the solution yet, and I hope that the answer is not NO!

  I have a dual boot of installation, one with W7 with Win2008 Server R2 SP1.

  Under W7, double screen works fine.

  Under Win Server, it shows only the monitor to the laptop, I tried to hook up a monitor to the port-D, VGA, both at the time and one in a tower. Start with VGA connected, start with D-port plugged.

  nothing...

  None of those trial showed Windows I got a second monitor.

  Tried watching pilots, they clam to be up-to-date, tried to install Presentation Director, as I thought, this is not installable on Win server.

  I have the sometihg mist?

  Thanks in advance, if it works, No 4 laptop computer sales will be happy!

  Alexander

  PS: Sorry for the bad English, not my native language

  Finally got hold of 2 laptops, we worked so I grad info on drivers.

  Necessary the Mobile Intel (r) 4 series Express Chipset Family

  Here is the zip file with the installation program:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20602&ProdId=2991&lang=eng

  Extracted, run, restart, worked, made my day!

  Alex

• Card double screen disable integrated video

  I have a question in regards to multiple monitors and Vista.

  I installed a card double screen and sound essentially disabled the on board video screen.  It appears from the documentation, I found that drivers on the double map screen and embedded video are different and must be the same.  I updated the chipset Intel G45/43 built-in monitor drivers, but still no luck I continue to make the same mistake:

  "Incompatible graphics card has been disabled.  At least a card on the system has been disabled because its drivers are not compatible with the VGA card driver".

  According to the documentation, I found the driver WDDM and XPDM drivers must be the same.  What else do I need to update (not to mention that the video driver) to make the onboard graphics still works?  Thank you.

  Hi Paul,.

  You must get in touch with the Intel to get help on this issue.

  Intel support

• Cannot select a native resolution when double screening

  Hello
  Here are the basics. Laptop is a HP Pavilion DV2480se running Vista Home premium 64-bit w / SP2. I have a Samsung Syncmaster 2243 NW LCD screen attached via a VGA cable.

  Since I got the screen (4 months) I was able to double screen with the laptop screen running at its default value of 1280 by 800 pixels and LCD 1680 x 1050 screen (it is wanted to display resolution) by adjusting the parameters via the display settings and/or the NVIDIA Control Panel. I do always disconnect the LCD screen of the portable computer and reconnect without problem. Today, if I plugged it upward and the screen LCD looked funny and when I went to set the resolution in the display settings I can not select 1680 x 1050, nor in the NVIDIA Control Panel. I tried to unplug and reconnect the cable, restart, reinstall the driver, allowing the extra modes on the monitor etc and nothing allows me to get the mode 1680 x 1050.

  I tried to connect to another screen but have the same problem with it.

  Can someone provide advice.

  Hello

  Check with support from Nividia and their forums might be a known issue.

  NVIDIA - drivers - DO NOT USE THE SCANNER she finds often versions older - information entered in manually
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA - Support
  http://www.nvidia.com/page/support.html

  NVIDIA communities (forums)
  http://www.nvidia.com/object/nvidia_zones.html

  You may have to go back to an older driver. Strange that you found has been manually
  older than you. Wonder if the Windows updates or something else installed one
  incorrect driver. Rob - bicycle - Mark Twain said it is good.