Re: problem with network card and display

Similar Questions

• problem with network card with 10 Windows and Fusion

  I can't get my network card to work as I have improved my VM to Windows 10.  It shows that permits and OK in the Windows Device Manager but disabled and cannot be enabled in network connections. This happened with Fusion 7 and continues since I upgraded to Fusion 8.  I reinstalled VMware tools, remove the card and reinstalled in Windows, remove the card and reinstalled in the settings of the Virtual Machine in Fusion.  It happens both in mode 'Share with my Mac' and automatic bypass. Please advise.  Thank you.

  As mentioned in another thread: got back to Windows 7, search, and uninstall a client VPN, re-start at level to Windows 10.  Networking, then worked correctly.

• Extremely slow WRT54G navigation pages @ 192.168.1.1 - this could be a problem with network card?

  Friend of mine is having the problems of Internet connection on his main PC which is hard wired to the router, it is using Comcast cable (18Mbit) and all of a sudden today the speed fell to dialup speeds, literally, however its ONLY this main with the issue of speed pc, there are 2 other computers connected wirelessly to the router, and they run at full speed during the test on speedtest.net

  Solve the problem, I tried bypassing the router and still have the issue of speed, so I can pretty much rule out the router, but as part of my troubleshooting whenever I try to access the router configuration pages via 192.168.1.1 but it is VERY slow to respond.

  For example when hitting enter after typing 192.168.1.1 it takes about 45 seconds to view the router configuration page, and then clicking on any other tabs takes 30-45 seconds longer to respond.

  So my main question with this post, is it possible that its network card went bad? What would cause really slow access to the configuration of the router?

  The PC is under Win 7 Ultimate 32 bit and Ive tried to run the network troubleshooter, uninstalled the network card in Device Manager / reinstalled the drivers but nothing seems to work.

  I also ran Malware Bytes and the analytical results were clean.

  Any ideas appreciated!

  can you 'borrow' a card? This is the only way to be sure, eliminating hours of trial and error procedures. one of the mega electronic stores is a good source, if it solves your problem you keep the card, otherwise there is the option to return

• Problem with the creation and display of intelligent insights

  I have a problem with the intelligent preview function. I use Lightroom 6.4 on Windows 10.

  • When I hit the "Original Photo" icon under the histogram in the develop Module, nothing happens: the remans icon exactly the same and no record Preview Smart is created in the catalog folder.
  • When I create a Smart overview in the library Module (library-> Previews-> generate Smart previews), a Preview Smart folder is created in the catalog folder, BUT , in the module development, l ' icon below the histogram says still 'Original Photo': it does not seem to recognize that a smart preview is available.

  Any idea?

  Rob.

  If everything works as you want, so you can leave the open Historgram.

• PROBLEMS WITH NETWORK CARD

  device: hp pavilion g6

  Serial No.: g6t - 1 d 00

  I have re installed windows 7 Home premium 64-bit and now, having problems connecting to the internet

  I tried Device Manager and its exclamatory markson showing yellow

  1. ethernet controller

  2. network controller

  3. PCI device

  4 PCI simple communication controller

  5. SM bus controller...

  Please send the appropriate links for the download...

  Using HP Recovery will return the computer to factory condition... including the OS Windows7 and all the drivers and software HP Recovery partition. Please use the support of HP recovery, you created when you first you computer Configuration. If you create this media, please see DVD - SP1 de Windows 7 64 b + Supp 2 Recovery Kit or contact official HP, via the Portal Support HP's worldwide, to order a support of HP recovery for your computer.

  IF you try to install Windows from a generic Windows 7 installation disc, you need to install a lot of drivers available from the page of CTO Notebook PC drivers HP Pavilion g6t - 1 d 00

  1. Local Area Network (LAN) Driver Realtek

  2. ??? (Please provide the ID window material)?

  3. Realtek card reader driver

  4. Intel Management Engine Interface Driver (MEI)

  5. Intel® Chipset Device Software (INF Update Utility)

  Please message the Windows Device Manager (text only) "Hardware ID" of all remaining missing or unknown devices, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• SCO UNIXWARE 7.1.1 install vSphere 4 (ESX 4) ERROR problem with network card

  Hello

  I try to install SCO unixware 7.1.1 on vSphere 4.

  Install and configure sco OK after installation OK, but after you configure NIC SCO is dead

  PANIC: Integer zero-divide trap in kernel mode

  When I disconnect the NIC so unixware run OK

  Thank you

  This looks like a known bug of UnixWare.  You must install SCO UnixWare Maintenance Pack 5 before setting up networking.

  Please see the section of the Guest operating system Setup Guide for SCO UnixWare 7.  In particular:

  Note To avoid a kernel panic, install MP5 before performing any configuration network on UnixWare 7.1.1.

• I have a problem with my location network cards and I can not find my LAN on my PC.

  I can't find my LAN

  Hello! Im having trouble with the location of my network cards and I can not find my LAN on my pc - I have recently updated my software with phone system automated.

  Hello

  Perform the steps in the article mentioned below and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Hope this information helps.

• Problem with Half Life 2 display driver

  Please can someone help me?
  I just installed the game (Half Life 2)
  whenever I play the game everything is fine until I have quit the game, my laptop fell down and restarts.
  the error report I send said that there is a problem with my display driver.
  before I start the game, I get a message that says that my display driver is outdated and that I could get in trouble, because my computer is a laptop, (Nvidia) do not carry the Toshiba drivers.
  I've been on the Toshiba site and they have no display driver newer than the one I use now.
  Please could someone suggest something I could try.
  and Toshiba will bring a driver updated in the near future? This really seems a pity that the game seems to work verywell accept for this problem that exists.
  My laptop is a Toshiba Satellite P10 with a Nvidia G-FORCE FX GO5200 card inside.
  Your M Lovett.

  I have the same card and I get the same message, however without crashing.

  you have installed all the updates/fixes you can to ACE this may solve the problem.

  What about drivers who are the cause of the accident, one of my friends had a lot of problems with regularize them and crashing and it was running the game on a custom platform so maybe it's not that the real fault.

  [Edited by: admin 30 May 05 07:13]

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• Problems with wifi, bluetooth and gps in my iphone after updating iOS 6

  After that the last iOS 9.3 update my iphone 6 has problems with wifi, bluetooth and gps. Now, my wifi connection is slower and falls easily on a short distance. My bluetooth does the same. But the biggest problem is the GPS on my phone. I tried Island:

  -By doing a reset network

  -Do a reset total and restore my phone

  -To restart my phone twice.

  -Audit and third-party applications unnistalling

  Nothing works. I was in the apple store where they checked my phone and they say everything is ok with the phone. I'm not crazy, and I know when something does not work correctly. Also, I think it's iOS 9.3 update a reaponsible for my phone issues.

  Please fix bugs fast.

  Having the same exact problems since the upgrade. In addition, battery drains very quickly now, and sometimes the phone becomes very hot. It took to the Genius Bar and they told me everything was normal in the diagnostic tests. Restored, restarting, etc., and always the same problems. GPS locates me, but then don't follow my movement at all and told to go outside as the gps is not detected even if I am outside. Bluetooth connection to the car and watch grave intermittently. Signal WiFi is greatly reduced and falls easily.

• HP pavilion f002sm 17: hp pavilion 17 f002sm problem with graphics card

  OK Hi again, you help me with my problem with graphics card yesterday I install the driver for my laptop and I can play games, but I I look for tools of diagnosis and is in writing which is r5 graphics card which is built on my laptop and I have A7 graphical please help amd a8 6410 win 7 32-bit

  Hi @zumzo ,

  I understand that you have installed the driver and it works fine.  When you checked the diagnostics you became confused because it says graphic R5 but you R7.

  According to the specifications of your laptop you have AMD Quad - Core A8 - 6410 APU with graphics Radeon R5 (2 GHz, 2 MB cache).

  Here is a link to the 17-f002sm HP Pavilion Notebook product specifications to confirm this information. I hope that this eliminates any confusion.

  

• Problem with a card its Realtek ALC888

  Hey all

  I have a problem with my pc and sound card.

  I have a

  HP Pavilion Media Center TV m7739.sc desktop PC

  with an ALC 888 audio DAC.

  I got an Nvidia graphics card in the pc. And have now a pc with an lcd screen and a projector in. But the sound is not work enymore. Only if the launch the LCD with a HDMI cable. Somone have the same solution of this problem?

  my pc run windows 7 64 bit right now, but before he run Vista pc came with Vista system

  I have lookend a support site Hp and couldent find the right drivers I tried a 64 bit vista driver but works dossent

  and I tried the realtek site but with the same sollution on.

  I can see if I run the program add menu there is the pilot but not in programs or down to the level of the office.

  Hope so, will somone and can help me with this

  THX all and happy day all the

  MVH

  Martin Nieslen

  Hi, Martin:

  You must go into your BIOS (press the F10 key to the HP splash screen). Enter the menu of your BIOS, and if it has a device configuration menu, or something like that, you have to find the menu for your on-board audio setting.

  It is probably set to Auto. You must change this setting from where it is now, on " Enabled". Save the setting here and when you exit the BIOS.

  Now, your integrated sound card should work and your HDMI sound should work.

  Paul

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• Problems with Windows Update and load XP SP3

  I had a problem with my system and had to replace my HARD drive and reload XP and all my applications and data.  Now, I installed SP2 and try to install SP3. Windows Update does not work (get the 080244019 error code x) and when I try to install the SP3 files from the Microsoft site, it'll run about halfway through and then stop and hang, displaying the message "Finish Installation" with bar at halfway of the progression.  I tried the MSRT and FixIt nothing helps.  I checked services.msc to see all the required services are enabled or started.  I read that some malware will be stop some services without notice.

  After a few attempts to load the file SP3 failed, check Add/Remove programs in Control Panel Windows XP Service Pack lists 3 but no file size or to update the date information as with other programs.  My browser is IE8 and I was doing some Hot fix for Windows XP downloads, this adventure started about 3 weeks ago, but no other automatic update downloads.  I use the following McAfee provided by my ISP for protection AV and firewall with regular full scans.  Scan today revealed there is apparently a single trojan file that cannot be deleted, but there were no further details.  My system is also fully functional; I seem to get the updates for McAfee and other applications OK but not SP3.  I received or otherwise installed following updates or Hot Fix for XP downloads in the past 3 weeks:

  KB954550-v5

  KB932823-v3

  KB915800 v4

  KB884020

  KB926239

  KB2618444 (Windows IE8 security update)

  I found an answer on another forum on editing the registry for the "/ Edit EDWARD CSDVersion value ' but have not yet tried waiting for any response to this request.  I'd like some useful suggestions.  Thank you and happy new year!

  Thanks for the quick response.  I did some checking on my system, I have XP Home Edition ships with the system bought in July 2007.  Add/Remove Programs shows that the aborted install XP SP3 and IE8 installation; I tried to load the SP2 file but it doesn't show here as an addition, so it may have been part of the original XP CD and I just crush.  Even for IE7 so I am not able to drop back to all recommend you.  I will try your solution later today and post my results. I saved SP2, SP3 and IE8 in my office and a flash player to reload later according to your instructions.  Stay tuned.

  It would be unusual for a CD of Windows XP (official) to have integrated Internet Explorer 7.

• problem with memory card reader

  bought an Acer C720 Chromebook in July, nine.  Now problems with memory card reader.  Sometimes he reads, sometimes it won't.  This can be corrected?

  Hi PatPeoples84,

  Yes it is possible, unfortunately it will probably come during the service.

  I recommend you contact the provider of the guarantee. In the United States, refurbished products are managed by another institution as new products. If you have any questions, thinking to send me a private message with your serial number and I'll help you get the correct coordinates.

  Thank you
  Cory