Doubt on the breakpoint?

Similar Questions

• Place the breakpoint by program

  Hello people,

  Is there no way to set the breakpoint by program or break VI on occasion?

  You are probably looking for a conditional probe: right click on a thread > probe Custom >...

  In Sad help for 'probes', then select 'custom of creation. "

  Happy VI - ing!

• CVI2009 window does not come forward on the breakpoint

  When I run my program, with a defined breakpoint, the program stops at the breakpoint, but the screen of the BCI does not come forward.  If I can get to the icons will stop or step and click on one, the program will be as it should.  The other important element in this puzzle, it is that there are two icons of programs in the toolbar.

  Update: the problem has nothing to do with the code I sent you.  I fixed the problem of duplication of icons by unchecking the main Panel button a taskbar under the Panel change > other attributes in the file of the IUR.  In the same place, I set the ICB does not come forward by setting the floating Style '' never. ''  This seems to solve the problem.

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• doubt to the wi - fi connection

  Hello

  I have a doubt about the WiFi with a device.  I have this in my source code:

     String URL = urlupdate + ";interface=wifi";
                         conn = (HttpConnection)Connector.open(URL);
                         //
                        int rc = conn.getResponseCode();
                         if (rc != HttpConnection.HTTP_OK)
                             throw new IOException("Error response code: " + rc);
                         is = conn.openInputStream();
  

  and his works in my Simulator. But the doubt is when I use the phone, do I have to change the source code with all the settings?

  Thank you

  Assuming that the device has WiFi and it works, so this code should run as is, on the device.

• Debugger does not move to the breakpoints on the device and Simulator

  Hi all

  my Blackberry 9800 recently got updated to v6.0.0.534.

  I use BlackBerry java plugin in Eclipse.

  The details are the following:

  BLackberry Java Plugin version 1.3.0.201102031007 - 19

  BlackBerry Java SDK's 6.0.0.30

  And the JDE is 6.0.0

  First of all, there are some files missing debugging, I have that and earlier was able to debug properly.

  Now he comes into debug mode, but does not touch the breakpoints.

  Hi all

  I've had this work now, I cleaned up the Simulator and then deleted these files:

  . COD

  .jar

  . Debug

  .jad

  . CAP

  .

• Doubt of the ACL

  Hello. I have a little doubt about the ACL:

  If I apply an ACL (denying any entry/exit telnet connections) to the interface VLAN 5 192.168.1.254 IP address is it still possible to telnet to IP 192.168.1.254? Other IP addresses on the network, I know that it is not possible.

  Thank you.

  You can control the protocols used for the management of the VTY. To allow only SSH, you follow these steps.

  line vty 0 15

  entry ssh transport

  Let's say for some reason any you telnet and SSH, you follow these steps.

  line vty 0 15

  transport input telnet ssh

  Here is a link to the configuration of SSH (router or switch will work).

  http://www.packetpros.com/wiki/index.php/Cisco

• At the start of my Toshiba laptop Windows 7, my password is correct, no doubt, but the system says that it is not. Why?

  From my computer, my password is not correct no doubts, but the system said that it is not, ran maleware advast and no problem. Would it be a glich in the updates? Is this a battery problem? When it is plugged in, it works after the 5 or greater.

  See the guide to recovering lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but this looks like a corrupted user profile that needs fixing or replacement.

  Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

• Sizing of composition in the breakpoints

  Hello

  I use a composition for a navigation menu, but I'll have to enter into the composition of each breakpoint and re - enter the dimensions and layout, because the composition does not have its form of previous breakpoint... Is there a way to keep the same size on each breakpoint.

  Thank you

  Hello spacman75,

  To keep the size of your identical publication on all the breakpoints just right click on the composition > copy the size and position > all breakpoints.

  I would like to know if that's what you need!

  Thank you

  Ankush

• Doubt on the export of pages in JPG format at high resolution with Indesign

  Hello

  I use to work two software, your skill of QuarkXpress and Indesign. If I had to choose one, I prefer Indesign, it is very nice and I love it, but I have to work with the software.

  Well, I have a doubt about the use of Indesign method to export a page in JPG, high-resolution, because QuarkXpress do the same job, but in a different way, so my doubt is about the quality of the files produced.

  It is a very technical issue, if someone with experience in the professional press and print or an Adobe expert could answer, I would be grateful.

  InDesign, producing a poor quality file or QuarkXpress that producing a poor quality file?

  My question is as follows:

  I opened a document in Indesign, and I decide to export it. To simplify things, we have a unique page DIN A4 document.

  So I tell Indesign to export the pageand I want a JPG, high-resolution 300 DPI file.

  Indesign do his job very well, and produce the file exported. This is a JPG file, there are 300 dpi.

  If I open the document in Photoshopand I'm going to... Image of ... Image size...

  I see the Indesign document indicates the exact measurements of a DIN A4 210 x 297 mm and the resolution of the file, I have 300 DPI.

  Therefore seems to be that indesign has done a great job.

  Very well.

  Now, I explain what is happening with QuarkXpress.

  I do the same thing, I have a document to a single page, DIN A4 and I export it as JPG format at high resolution of 300 dpi.

  Well, now QuarkXpress, create the file and I open the file in Photoshop.

  Surprise.

  The file has larger than DIN A4 and a lower resolution dimensions!

  Exactly, QuarkXpress produce a jpg of the following dimensions: 874,89 x 1237,9 mm and a resolution of 72 dpi

  When I see 72 dpi, I think that the document is in low resolution. However, I have a larger document?

  I open the QuarkXpress file in Photoshop, then I uncheck resampling, in this way Photoshop will never change the image. Now, I change the value of resolution of 72 dpi, 300 dpi, which is the value I want.

  And what happens? What happens is that I get a document with measurements of a DIN A4 and also at 300 DPI.

  ???

  So basically QuarkXpress does the same work in Indesign, but in a different way.

  The file QuarkXpress are 2.29 MB more or less. The Indesign file are 3.84 MB more or less.

  So why these differences?

  Which method is the best and why Indesign produce a different file to QuarkXpresss?

  See you soon

  As far as I know, the ppi is not the required metadata for the images.

  So Im guessing that Quark exports jpg ppi worthless.

  But Photoshop is to assign a value of ppi when it opens an image without specified ppi value.

  This value is be 72, but it could be anything, because the pixel dimensions do not change.

• Reactive Muse: items not hidden in the breakpoints?

  I'm trying to hide some elements to breakpoints, when I get to mobile office design. It is reflecting in design but on preview or publish items become apparent and any changes to text does not reflect.

  Sometimes, when you select the object you want to hide, and then select 'Hide in all other breakpoints' does not work and you will need to pass other breakpoints individually, and then select the object and 'hide the breakpoint' on each of the other breakpoints, you do not want this element that is present in.

• Toggle visibility identical to hide the breakpoint?

  As the title suggests, is Toggle visibility through the layers panel exactly the same as hide/show the breakpoint? I find it MUCH easier manage objects in the set of breakpoints through this method, but would not continue unless this is a valid way to work.

  Thank you!

  Neil.

  Is is the same.

  Just watch when you choose 'Hide in Breakpoint', and you'll see the indicator of 'visibility' next to the entrance of layers in the layers panel disappear.

• Why are the breakpoints and the page from the master page settings not inherited by all pages?

  Hello

  I've been busy creating a sensitive site with points to stop and a fluid width. Everything works now on my master page. But I found my breakpoints and the parameters of the page were not inherited from my master page for all other pages. To manually create all exactly the same breakpoints would be a lot of work. Can someone help me with the please my problem?

  Kind regards

  Tim

  When you apply a master page with breakpoints to another page, the breakpoints are displayed as markers of white triangle. All you need to do is add your breakpoints in the same place as markers.

  The reasoning behind this is likely that sometimes the content of the page should be changed more than the constant elements in the master.

  I hope this helps.

  David

  Creative muse

• return the text on the breakpoint

  Hi all!

  Possible wrap text on breakpoint of difference?

  For example:

  The breakpoint of 960 px text looks like:

  I 40 anni dopo I livelli di collagen.

  Elastina e diminuiscono acid Ialuronico in modo significant

  a dell'invecchiamento causa

  --------------------------------------------------------

  The breakpoint of 480 px text looks like:

  I 40 anni dopo

  I have livelli di collagen,

  Elastina e acid Ialuronico

  diminuiscono in modo significant

  a dell'invecchiamento causa

  ----------------------------------------------------------

  I'm not going do automatically, (like muse can do in fluid text mode).  I can change for example the color, the size, but when I send encapsulates the text he made on all breakpoints!
  
  It is possible might wrap the text as I want the breakpoint difference?

  Thank you!

  In theory it is possible, although there is a huge difference between 960 px and 580 px!

  Set your text box size None:

  

  Then put in the form the text field for the 480 px breakpoint after clicking on the button below:

  

• How to disable the effect of hovering in the breakpoints?

  Hello
  is it possible to do it please?
  I want to remove the effects washed out the buttons for mobile breakpoints in my site.
  It is not very well when I scroll on my tablet on smartphone.

  Thank you.
  Best regards

  Hello

  State is not editable on different stitches, however, I can suggest you to do the same thing, it of "hide the same object in the breakpoint of the introduction to your phone" and you can put the object again without any fading effect to the rollover State.

  

  Best regards

  _Ankush

  https://www.Pinterest.com/PIN/create/extension/