CC Adobe tried to run for 5 hours on my new book surfaces/windows 10. no idea what is happening?

Similar Questions

• "Grinds away" for an hour at the start of the computer. No idea what is running.

  I have a HP Compaq Presario with Windows XP Home SP3.  Whenever I start it takes about 1 hour prior to analysis or research or other stops access to the hard drive.  I use Microsoft Security Essentials to my anti-malware and I have MS office 2003.  I went to the HP Service and they did some maleware scans and tech stuff but it still grinds away when I boot.  Is it possible to see what programs are running that a no-tech can read so I can maybe turn off?  I spent in msconfig services and start and off most everything except microsoft stuff.  I went to the process from the Task Manager, but it only shows "sub" running programs. Any ideas it might be?

  How much RAM does your computer have?

  When your computer is running out of RAM physical, then it is full of virtual memory which is stored on your disk.  When this happens, your drive is constantly active, and the access that take microseconds in RAM eventually take milliseconds from the disc (about 1000 x).  My son has an old XP with 512 MB RAM machine that takes more than 1/2 hour to start because of it.  It quickly starts in Safe Mode, however.  In my humble OPINION, if you have sub 2GByte of RAM, it's time to upgrade your RAM.

  HTH,

  JW

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• HP Envy 15-k020us: video flickers and has red screen after running for 2 hours

  After running for 2 hours, my screen flickers then goes red.  I saw a previous announcement but this person was able to solve the problem and the answer has never been published.  I fear that the problem may be due to overheating.  Thank you.

  Hello @Jodonnell715,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are not familiar with works of the function of the Forum, private messages
  this message has instructions.

  Good luck!

• Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to the installation of Windows updates?

  3. do you have security software installed on your system?

  Method:

  Follow the indicated link and perform the steps and check if it helps fix the problem.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  Let us know if it helps.

• I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I want to buy Adobe Creative Suite 5, but I can't find that anywhere, and I have no idea what this creative cloud thing. Can someone call me please?

  I want to buy Adobe Creative Suite 5, but I can't find that anywhere, and I have no idea what this creative cloud thing. Can someone call me please?

  You can not buy CS5. Adobe sells only current products, i.e. CS6 or creative cloud. Creative cloud is a subscription model, which means that you rent the software as long as you want to use.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  Creative Suite 6

  Mylenium

• T60: Recovery of backup running for 24 hours...

  I have a T60 with 60 GB HARD drive and I decided to get a new 500 GB HDD, With the Rescue & Recovery option, I was really confident to try myself this upgrade. So did the following.

  -The latest version of RR 4.x on old HDD
  Taken-A a full backup of the old HARD drive into a network drive (backup file was about 13 GB)
  -Removed old HDD & installed new HARD drive
  -Starting and using RR pointing to the network drive and started the backup
  -RR finished copying the files, and then he began to loop through some messages "System Configuration" and has been restarted every minute or so.

  Given that the backup file was about 13 GB, I've let it run for more than 30 hours and eventually killed.

  I had to install my old 60 GB HARD drive and now looking for a better option restore my T60 on the new HARD drive.
  I don't know if I was a bad thing, but would like to know - the best way to get my backup restored on my new HARD drive?

  Return to factory settings is not an option for me because of the other limitations.

  Thank you
  Ravi
  T60 (1951) / Windows XP / 2.5 GB / 60 GB HARD drive ~ trying to go 500 GB

  
  

• The system failure when Adobe Dreamweaver CS6 running for the first time... Why?

  When I downloaded the adobe dreamweaver cs6 and during installation... There is nothing wrong except the screen resolution (required = 1280 * 800, but available = 1330 * 768)

  But when I tried to run the program for the first time, the system had failed.

  Can you help me to know the true cause, please?

  Note: I'm using Windows XP sp1

  CS6 requires a minimum of Windows XP with Service Pack 3. Also, your vertical resolution does not meet the minimum requirements.

• My slowsdown LV after running for several hours program

  Hello

  Could you please help me in my problem explained below.

  My experiences require to run the program from LV for 2-3 days in a stretch of collecting data to 10 Hz speed using a release configuration. But after running for a few hours, the program slows down, not buying the data with the same speed. If I restart the program again, it works very well with the required speed.

  I have LV v4.0.1 running in my Windows 2000 operating system. I have the card PCI-GPIB connected to Lecroy 8901 GPIB interface for data acquisition. I also LAB - PC + to control some engines.

  I have NEITHER-DAQ 6.6, NI-VISA for windows 95 / NT installed in my system.

  I thought that the problem could be my low end computer and recently updated with motherboard relatavely high speed and RAM. But the problem is still there.

  I have attached my program with this message file.

  valueble suggestions are greatly apprecited.

  Thank you.

  You generate data for display and it makes your system slow.

  Keep your smaller screen and write data on the disk.

• HP C7280 printer all-in-one: how to stop the software installation on C7280 printer, running for 6 hours

  I completed the installation of the C7280 all in software and it got to the configuration of the printer.  I used the wizard on the printer wireless to locate the wireless on the laptop, but when I tried to search for the printer on the laptop he couldn't find it.  Tried to save because it wouldn't let me move forward on the configuration and it inadvertenly started installation, but this time it will not stop install (6hrs) how can I stop installation and save my previous install

  Thanks for the reply, I have already done 4 uninstall yesterday 7z file level and renamed the file 7z in what has been shown as lacking in the original installation failed.  I was trying to see if I could save the first successful installation after all of the problems.  So, yesterday I did basically what you said and the software is installed and this time the printer has been detected and it works fine now.  Thank you

• Node simple database pre-installation checks running for 2 hours.

  Not having my first install Oracle EBS on a concert of 16 16 VM drivers, due to the lack of sufficient space on file system, I added a new 900 GB virtual drive and rose to /d01 with lots of reading permanent writing on a BONE 7 OEL.

  Failed to install previous pre-installation check relatively quickly (10 minutes or more), but this control of pre-installation worked for 2 hours now, with no updates.

  ---------------------------

  .........

  Mid-range host ping was successful

  command: / bin/ping - c 1 host - 1.skytap.example.

  PING host - 1.skytap.example (127.0.0.1) 56 (84) bytes of data.

  64 bytes of the host - 1.skytap.example (127.0.0.1): icmp_seq = 1 ttl = 64 time = 0.062 ms

  -Home - 1.skytap.example - ping statistics--

  1 packets transmitted, received 1, 0% packet loss, time 0ms s

  RTT min/avg/max/leg = 0.062/0.062/0.062/0.000 ms

  Mid-range host domain Ping was successful

  Check complete.

  Checks of preinstallation of database

  These controls may take a few minutes...

  --------------------------------------

  The computer is allocate mem and CPU for the gnome, java and the Xorg process, but I expect to see an update now.

  Is there a log somewhere that will tell me if he actively done something or if it is stuck?

  Is there a protocol suitable for wiping system before you try a new installation of a new rest area?

  Is there a log somewhere that will tell me if he actively done something or if it is stuck?

  Is there a protocol suitable for wiping system before you try a new installation of a new rest area?

  What is a 12.2 installation? If so, you should find the details on doing RapidWiz in $TMP //in the .log file - Rapid troubleshooting install for E-Business Suite version 12.2 (Doc ID 1378579.1)

  Thank you

  Hussein

• Trying to run Hallmark Card V2 and it "goes beyond" the window and will not reduce in size

  I am new to Windows 7.  An old program I have and seems to work - so-Hallmark Card Studio V2 is above all designed for Windows XP.  "However, when you open the program it" overflows the monitor window and the symbol of "boxes" at the top right normally used to enlarge/reduce the size of the window is covered on mainly off screen on the monitor.  So I can't minimize the window to fit something like 3/4 of the monitor.  I tried all the keyboard traits that affect Windows, but the only thing that works is to reduce the window to nothing or on-screen "overfull".  I tried to run the program under different settings from earlier Versions, but which has no effect either.

  Any suggestion is appreciated.  Thank you!

  WEC

  Your best bet is to contact the developer of Hallmark card because we have no idea if it's even compatible with win 8 and knows virtually nothing about his works.

• my windows vista (reboot) for 6 hours, but same screen comes to show that his research and nothing happened?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Programs that you have problems with windows vista starts do not
  • Error messages, it's that my startup repair tool going but its still looking for problems
  • Recent changes were made to your computer no change, it's just stopped working suddenly and close
  • What you have already tried to solve the problem I tried startup repair, but that has not worked. I've tried off DURATION and attempted to start normally and then after a while my screen goes blank.i tried the system restore, but it did not work. I AM ALSO AFRAID THAT I LOSE MY DATA, CAN U PLEASE GUIDE ME THROUGH WITHOUT LOSS OF DATA
   
  Hello
   
   
  1. don't you make changes to the computer when you used the last time? For example, you have installed updates or a program of ny?
   
  Method 1.
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 2.

  Step A.
  Start your computer in safe mode and check if it starts.
  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
   
  Step B.
  If it starts on the desktop in safe mode and then set your computer to the clean boot and check if it starts successfully. If it starts successfully can be a third-party application or service is causing the problem. We can use the approach 50 / 50 to narrow down the root cause of the problem.
  
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 3.
  I recommend you to restore system using a Windows Vista DVD.

  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows Vista installation disc.
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows Vista installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
   
  For more information see the articles below:
  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have not loaded for 12 hours even my new probook 4530 s. It is not serious?...

  Pobook HP 4530 s

  Windows 7 Home Premium

  Question:

  I did not my new laptop for 12 hours not only once (that I bought 4 days ago). I charge/discharge again and again 3 times a day.

  Now,.

  (1) I mean is OK to treat my laptop as battery as it happens?

  (2) I have can I load 12 hours 3 times (charge/discharge cycles) after its 4 days of work?

  Send me your answer as soon as possible!

  1. I would simply say that you use the adapter to power the unit more often if possible, rather than through 3 cycles of charge per day. It's completely up to you , there is no wrong or here.
  2. Two tools can be read at different times or using math slightly different to calculate this.
  3. The calibration only requires you to charge/discharge 3 times. It is almost impossible to calculate the life of the battery with an accuracy of 100%; This is due to the constant evolution of the current consumption. For example, if you watch a HD movie or playing a 3D game, your energy consumption will increase. But if the computer sits there idle (not using it, but it is lit), it uses a lot less energy. These and other factors make it impossible to perfectly calculate how much battery is left.