Downgrade firmware IX4 - 300 d

Similar Questions

• update firmware ix4 - 300 d

  Hello

  FIRT of all sorry for my English loll

  My Nas works on 4.1.102.29716 firmware version.

  I want to update to 4.1.112.33292, but i is impossible. I checked to connect to the nas website and it said that the fw is corrupt.

  Any advise?

  Hello mixmaster57,

  Please see this thread:
  https://forums.Lenovo.com/T5/Iomega-Desktop-Network-Storage/cannot-upgrade-firmware-IX2-to-4-1-112-3...

• Considering ix4 - 300 d need your advice

  Hello:

  I intend to buy the ix4 - 300 d.

  But I have a few questions which need advice.

  Issues related to the:

  1. can I use it to back up my sites, facebook and Twitter data?

  2. is there a special procedure to use Seagate 3TO ST3000DM001 hard drive?

  3. should I update the firmware immediately?

  4. it seems that the warranty is 3 years. Someone did it before using it? How long can you recover your device?

  Thank you.

  Yes, it will be an advanced shipment so we will send you a replacement first unit, and then you will receive intsructions to create a shipping label and ship back us the defective unit in the same shipping box that was sent to you.

• Password by default Ix4 - 300 d

  Hello

  I have recently buy an ix4 NAS storage - 300 d.

  But I don't know what is the default username and password.

  Hello shahab_shv,

  There is no default username or password.

  You can find the manual for the ix4 - 300 d here:
  https://Lenovo-na-en.custhelp.com/app/cust_alp/p/1189, 1193/session/L3RpbWUvMTQzNjgxMDUxOS9zaWQvU2ZTN...

  Looking for the manual for the word "reset" and you'll find instructions on how to perform a reset of the safety.

• ix4 - 300 d activate gmail

  Hello

  I tried to turn on notifications of e-mail in the ix4 - 300 d, but the testmail is never sent. I use gmail-Server smtp (smtp.gmail.com). How can I configure the e-mail settings to support this?

  Comes to be noted - smtp settings are not required since mail sent through lenovo... Good solution.

• ix4 - 300 d does not start after factory reset and clear disk - HELP!

  Hi all

  I did a rest from the factory of my ix4 - 300 d. Sellected the quick erase option.

  He is now hooked up with "lenovo" on the screen.

  I've tried so far:

  remove all disks

  No network cable

  RESET button on the back (5 to 20 seconds)

  and a lot of power cable in and out

  removed the battery on the Board for 30 minutes...

  Help...!

  Hello VizBiz,

  If you have tried to start with all the removed drives and NAS does not start, I recommend to contact local support and asking an imager:
  https://Lenovo-AP-en.custhelp.com/app/answers/detail/A_ID/18133/session/L3RpbWUvMTM2NjU5MDgxMS9zaWQv...

• IX4 - 300 d add HARD drive

  I bought an IX4 - 300 d without hard disk and first I install a Raid 0 with 2x1To HDD. Now I add a new 1 to HDD and change for Raid 5, the ix4 recognize my new HARD drive and show TB of space in the State of the system, buy I can't use this space...
  The IX - 4 d 300 does not use that extra space.

  Any idea?

  concerning

  Readers need to be of the same manufacturer, otherwise the unit can accept them. This is because having discs with different specifications can cause problems with the RAID.

• questions ix4 - 300 d

  I just posted this to the thread of IOmega network storage before realizing there is a thread of Lenovo Network Storage here. Any help is appreciated!

  -----------------------------------------------------------------------------------------------------------------

  Hello, I'm new on the NAS and setting just has started up a new ix4 - 300 d with 4 x Seagate NAS 3TO (ST3000VN000) in RAID 10. It took about a day to end and everything seems fine, showing the ability of 5.4 to under the disk management page. Windows 7 (ultimate 64-bit) can see the device, but I cannot map it to a drive: I can't create any action, and it gives me the error "the selected function is not available because of the State of the pools.". I searched online and this seems to be a common problem, but I can't find a useful answer.

  Also, what format of file ix4 - 300 d is to create on the hard drives? I used the diskpart utility to clean each drive before installing the base on what I read on the web. Thus, all the readers had no partitiion or file format. Is this a problem? But I guess that's fine since the RAID 10 has been successfully created.

  Thank you in advance for your help!

  WXY,

  I'm not aware of any spirit of RAID 10 specific questions on the ix4 - 300 d.

  I would go ahead and re - create your RAID 10.

  If the problem persists, you can submit a ticket for support here:
  https://Lenovo-na-en.custhelp.com/app/ask/

  Or, if you wish, you can first submit the ticket and ask for the health of your drive (s) to be checked.

  If it happens again, I think that one or more drives a questions stay synchronized.

• IX4 - 300 d - cannot copy files between actions or the ext disk. USB

  Hi forum!

  I can't work for the life of me how to move files between the shares on the NAS. I can access my computer fine actions. I have a USB HARD drive connected to the front USB port and I want to copy some files from the HARD drive to a shared folder on the NAS, but when I'm in the content browser that I have no option to copy, and there is no functionality of drag - move. That I going nuts or something blatantly obvious lack?

  I want to copy data from USB directly as it is a few TB of data and copying on the LAN will take ages. It's going to be a regular thing, but I can't really put in place a copy job, because it is not the same type of data or file locations every time.

  Help, please!

  Thank you!

  Matt

  Hello MattDobson,

  You will need to map the actions:
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=how+to+map+a+network+sh...

  And move the data in this way, the Ext HDD will appear as its own share, but can be mapped as others.

  The content in the UI Viewer is not designed to move data.

  You can find documentation and downloads for the ix4 - 300 d here:
  https://Lenovo-na-en.custhelp.com/app/cust_alp/p/1189, 1193/session/L3RpbWUvMTQ0MDUyNTY3OS9zaWQvZWNDc...

  You can download the Storage Manager Lenovo via the link above, and which should help you to map actions.

• IX4 - 300 d / General SIN: How can I move large files between different folders?

  Hi @all.

  My new IX4 - 300 d arrived yesterday

  After doing his RAID-things all night, now I want to move my files from my old NAS to this one.

  I do this using Copy-supported by the ix4 - 300 d, which work fine.

  A big problem for me: I want to reorganize some large files / directories (> 200 GB), so I have to cut and paste the files from one folder to another (all on the ix4 - 300 d, but with different user groups).

  When I move files between subfolders in a folder of the sin, it works fast enough - I think here that the transfer will be treated directly by the nas server.

  When I do the same thing between subfolders in different folders (which appear as various network drives in windows Explorer), it seems that the transfer is managed by my pc or laptop - and it is very slow...

  I tried to move the files on my network environment (all folders are subfolders of a server: ix4 - 300 d) because I thought the problem was in my network mapping, but it does not work faster.

  How will I know my ix4 - 300 d to move the files directly (without the "help" from my pc)?

  Another idea for me was to do it via ftp, but my ix4 - 300 d only refused my connection (have to try a little more)

  Please help me

  I "solved" the problem by creating a copy of the temporary employment with the manual removal of duplicates once the task is completed. The copy job run all night.

  For future problems, I must think of an another "file management".

  Thanks for your response!

• ix4 - 300 d not accessible over the internet or Storage Manager lenovo

  Hello

  I bought Lenovo ix4 - 300 d for a long time now and it was fine up to that of a few weeks, all workers

  I ping the NAS drive to the IP address and all that is fine back.

  I did a lot of research online and have tried just about everything I can find on the subject to try to resolve what I will list below.

  • Hold Reset button 4 seconds (reboots but no change)
  • Hold Reset button 15 seconds (reboots without change)
  • Reboot the router / modem (no change)
  • To connect to a new network (no change)

  I can see the ix4 - 300 d in my area of windows network but cannot access a file because it requires a username / password. Shows NAS in "the other" and "computer."

  It is in 'computer' that the NAS is asking me user credentials.

  I want to completely reinstall the software on the NAS, but I am struggling to find the .tgz to.

  When I have the software is as simple as plugging the USB on the front of the NAS and then boot from USB?

  I could do with help as soon as POSSIBLE because this drive must be used for backups of the company.

  Kind regards

  Nathan Langer

  Vizion5 Creative Media Agency

  Hello digitaliss,

  You will need to contact your local support directly to a film recorder, you can do so here:
  https://Lenovo-EU-en.custhelp.com/app/answers/detail/A_ID/14722

• migrate from Raid 1 to Raid 5 with IX4 - 300 d

  I am considering buying an IX4 - 300 d.

  But what I want to know: I might consider commissioning with 2 drives in RAID-1 and later on the road buy a 3rd drive to upgrade my RAID-5.

  Is this possible on the fly, which means that I can just put in the drive of the 3rd, and I can upgrade to RAID-5 without data loss?

  (Yes, I would definitely have a backup before doing this, but I want to go create a new RAID-5 and have the backup copy of the backup data)

  And I'll be able to upgrade my drive later RAID-5 3-4 drives?

  Sorry, but I think there is no way to change the RAID level "on the fly"...

  That means backup your data, Notes users and their share of privileges etc. better as all you network configuration and start from scratch.

• IX4 - 300 d frozen at 69% during file system repair

  My Lenovo/Iomega IX4 - 300 d had the file system error, so I made the repair in offline mode, but he has been slain all night att 69% and Internet, SSH or the LCD on the front respond to anything...

  Obviously, I have no choice but to restart the thing, but I * am * curious if others have seen the same thing and if a cause is known?

  I copied the data manually, rebuilt the file system, in turn copied the data and after a reboot it now seems to work...

  Do not know what is the default process, but it was not stable yet in the last 8 hours since I made the Ext4 file system manually!

  I was just curious if anyone else had this behavior too...

• Can I downgrade firmware AirPort Express to 7.6.4 to 7.6.1?

  I have an AirPort Express 802.11n, 2nd generation, with the firmware 7.6.4. I was unable to get a Chromecast to connect to him - there seems to be a known problem with the connection to any firmware version 7.6.1. With the help of the utility AirPort 6.3.6 if I option click on the version of the firmware for the router and get the choice of the downgrading of firmware 7.6.3 but nothing earlier. The 'other' option one opens 'my documents' dialog, but if there is a version of previous firmware stored somewhere on my Mac, I don't know where to find. Grateful for any help.

  If you have purchased the Express with 7.6.4 firmware can not be downgraded. Downgrades Apple blocked... and 7.6.3 is poor so stick to what you have.

  I think that problems with Chromecast on 7.6.3 and 7.6.4 are more to do with an extreme as the express... However if she refuses to work... Be smart...

  Apple created their network for apple devices... so use your Apple TV not a chromecast.

  OR

  Buy a cheap as wireless router of the low-end N TP-Link Wireless (or other Chinese brand) chips... Connect all wireless router is the main router of the network and use as WAP for the Chromecast... you'll have a lot less questions to stick to Non-Apple wireless equipment when you use streamers not apple.

• Satellite Pro A300D: Can I old DVD player to downgrade firmware

  Is it possible to recover the old firmware (1.50 worm) or newer for DVRTD08A drive?

  Unfortunately, I flashed this drive with the wrong firmware version 1.54 to DVRTD08L with label flash function.

  My drive does not have this feature. This firmware will not affect the player functionality?

  Hello

  Unfortunately, you can download only the updates of the firmware which are available on the European driver Toshiba page.
  If your favorite firmware update is available, then you would be able to downgrade it.
  Is there no firmware then you can not change this :(

  > Will this feature of player firmware affect?
  It's not easy to tell in many cases, you can still use the CD/DVD drive and will not see any changes, but sometimes this incorrect firmware can damage the disc and make it unusable.