Downgrade to XP and USB controller
Pavilion dv9500... downgraded to XP Home (clean install) of Vista... need to card drivers mother/chipset to enable USB support appropriate. Universal USB Enhanced Host Controllers are installed (according to the Device Manager), but all the USB Root Hub shows the error message (damaged or missing driver). Have no recovery disks (all the stuff of additional drivers are for Vista).
Repair of USB drivers accomplished just by uninstalling all USB entries in device, reboot XP Manager and allowing XP to 'rediscover' and reload the correct drivers. Thanks to Cheryl G.
Tags: Notebooks
Similar Questions
-
SP A10 and USB controller drivers
I have a satellite pro A10 and cannot find the driver for the USB controller that is no longer available in toshiba online downloads. How can I get the driver that is not provided in the driver CD?
Hello
"normally you don't need a USB driver. The USB driver is part of XP and is installed by it! If it does not, you can uninstall the USB port in the Device Manager and the operating system reinstall the next time you start upward!
Good bye
-
Satellite A30: HARD drive, modem and USB controller
Hi, I have problems with my laptop A30. The HARD drive looks like it will fail (bad sectors) utility that I downloaded on the Hitachi site tells me that it is a hardware failure.
I am also unable to use my modem that I also get a "cannot open port ' error even if everything looks fine in Device Manager and I have a problem with a USB controller that is apparently not entirely installed but I can not find the drivers for it!
I am not a happy customer of Toshiba and it seems that there is a general failure with these the 30 GB Hitachi hard drives!
Retro Hi,
Maybe not much consolation, but my original 30 GB hard drive has been replaced after only 6 weeks of use. The replacement lasted 8 weeks and the third disc rotate a little better at 16 weeks. Readers were a mixture of Toshiba and Hitachi drives. After the failure of the third car, I decided to buy a bigger HDD (80 GB) and install it myself rather than lose the laptop for another two weeks so that it has been repaired. Then, I bought a new smaller HARD drive that I have installed in an external enclosure (USB) which I use now for regular backups of entire system weekly.
The HARD drive inside my A30 notebook on the right side directly on the optical drive, and there was a noticeable temperature increase when I work with the optical drive. I have a theory for pets, this increase in heat may adversely affect the HARD drive at times.
The last drive (a Toshiba MK8025GAS) is in place for 7 months but Norton Ghost has recently begun to report bad sectors so it looks like a new drive could soon be made to order.
-
Tecra M2 yellow exclamation - system basis, ethernet, and USB controller
Hi all.
SORRY FOR THE LONG TEXT TRYING TO ACE GIVE MUCH INFORMATION AS POSSIBLE.
I have a Tecra m2 Details: -.
PTM20E-4MP1D-FR
NO. 74631791 G SERIES
OTHER NUMBERS:-PM715/256 / 40 G 42/14XT/D/LM/W.
SINGLE UNIT CHANGE IS THE HARD DISK OF 40 GB ON EBAY WITH WINDOWS 2000 SERVICE PACK 3 INSTALLED.I have checked these forums and I would like to give a big thanks to Jack Black, who advised a link to download Intel Wlan page, this solved my problem-driver Wlan driver was NOT available in the toshiba download page. I REQUIRED the PRO2000 INTEL "DRIVER XP 32 / 2000. Thank you once again, Jack.
I have a problem with the Base system, Usb controller and Ethernet controller, although the USB devices on the right side of the unit work. These items are listed in the other devices category in Device Manager with the black-yellow exclamation next to them.
I worked my way through all the LAN DRIVERS from the toshiba download page, can't installed ethernet.
Similarly, the base system - I tried sd card download (suggested to this support page) and other downloads.
Nobody knows for certain what the base system is?
ANYONE KNOW WHAT DRIVERS I NEED OR WHERE TO GET THEM?haven't looked at the usb part again as I try to run internet facilities and you need fixed ethernet controller.
I looked at the guide suggested to install the drivers, but only after I had tried to disentangle the display and utilities toshiba sound etc.
An OTHER devices I have work at the INFRA RED using the driver - smc - fast irc or similar fom toshiba page.A BIG thank you to those who have read this maybe very far, the foregoing will help someone else.
Win XP is known as the Microsoft operating system better personally I prefer Win XP. But finally it s your own decision that you want to use.
-
NEED HELP!
Recently, I went down my HP Pavilion HP Pavilion g6 - 2264ca Notebook PC of Windows 8 for Windows 7. Only Windows 8 drivers are listed on the support page, but they seemed all to install and works very well except for my CONTROLLER USB and ETHERNET. It is not that all drivers in the title of the support page and update of Windows cannot find them, neither can update of pilot programs. Here's what it looks like in Device Manager.
Any suggestions where I might be able to get these drivers? Thank you!
(1) USB Controller - PCI\VEN_1022 & DEV_7812 & SUBSYS_1849103C & REV_03
While the first pilot, that I sent you must have worked, you can try one
http://support.AMD.com/en-us/download/chipset?OS=Windows+8.1+-+64
(2) Ethernet Controller - PCI\VEN_10EC & DEV_8136 & SUBSYS_1849103C & REV_05
Download and install the 5th on the list. (Win7 and WinServer 2008 R2 Auto Installation Program (SID: 1497589))
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
SMB and USB controller drivers
I have a DV6-7010us.
Upgrade online win8 failed and I've never done a recovery disk.
Need drivers links:
OTHER FEATURES:
SM bus controller:
PCI\VEN_1022 & DEV_780B & SUBSYS_182D103C & REV_14
PCI\VEN_1022 & DEV_780B & SUBSYS_182D103C
PCI\VEN_1022 & DEV_780B & CC_0C0500
PCI\VEN_1022 & DEV_780B & CC_0C05USB bus controllers:
PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C & REV_03
PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C
PCI\VEN_1022 & DEV_7812 & CC_0C0330
PCI\VEN_1022 & DEV_7812 & CC_0C03USB bus controllers:
PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C & REV_03
PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C
PCI\VEN_1022 & DEV_7812 & CC_0C0330
PCI\VEN_1022 & DEV_7812 & CC_0C03Thank you
Hello:
I guess that you need them for W7 64 bit?
Download and install the AMD chipset driver. A first on the list.
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2
Paul
-
I need communication controller simple PCI and usb controller drivers
I want drivers for above two controllers
model: 15-d103tx
product no: G2G48PA #ACJ
My os is windows 7 ultimate 32 bit
Hello:
Here are links to the drivers you need...
-
SM bus and USB drivers for HP Pavilion DV6 6024TX controller
I just had to do a clean install of Windows 7 Ultimate 64 bit on my HP Pavilion DV6 6024TX laptop.
I installed all the recommended and optional Windows updates and everything works * except * the SM Bus controller and USB controller - which are both showing yellow exclamation in Device Manager.
I looked at the forums and it is clear that I have to install new drivers, but I'm not 100% sure * that * drivers to install.
I know that this template contains * time * an accelerator of 6770 M graphics AMD Radeon * and * Embedded Intel HD graphics - and this is supposed to be switchable between the two, according to the profile of power it uses.
I looked for the latest drivers on the AMD website and they * don't * switchable graphics support - see: http://support.amd.com/en-us/download/mobile?os=Windows 7-64
This support AMD article returns me on the HP site for the best drivers: http://support.amd.com/en-us/kb-articles/Pages/737-28041SupportforATIMobility.aspx
I looked at the download page of the HP driver for this model, so there are a few options: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=au&dlc=en&sw_lang=&product=5079...
Did someone please advise I need the drivers and the best place to find them?
Thank you.
-JS
You are the very welcome.
Here is the link for the driver for the usb controller 3, you need.
-
Inspiron 530 'bus SM' and the necessary USB controller drivers...
Dear Dell's Support Forum:
Briarguy here, just south of Boston, and today I have an Inspiron 530, I received as a gift to replace my last PC hand made (I am really more used to buildiing my desktop PC, since 1992) which ceased to operate in late July of this year. I'll also have a Dimension 9200 off insane among the universities of Boston for a new "main office PC", and I would like the Inspiron to my mother for her needs.
The software drivers only I couldn't easily find the Inspiron 530 were the 'bus SM' and USB controller so-called cases (two USB 'controllers' showing!) in Win - XP Device Manager. Soneday I hope to upgrade the Inspiron 530 to use Win - 7 home, but before then I would get some help as to exactly where, to the Dell support page that I downloaded most of the hardware drivers to work because I got power find the USB controller drivers and 'bus SM' for this otherwise "works pretty well" Inspiron 530!
Could someone guide me please to the names of files that these drivers are, and where on this page I might better be able to find them?
Thank you in advance and Yours Sincerely,
Dave the BriarGuy
BUS SM = you have not installed the chipset drivers. USB 2.0 and up requires Service pack 3 for XP. Windows 7, 8 and 10 supports the chipset in native mode.
Description Supported OS Download Intel Chipset Software Installation Utility for 530abcd/530sabcd, v.9.0.0.1008, A01
Intel Chipset Software Installation Utility for Vistamore detailsWindows Vista 64-bit
Windows Vista 32-bitIntel Chipset Software Installation Utility, v.8.3.0.1013, A00
Intel Chipset driver for XP OSmore detailsWindows XP You will also need
-
SMBus and usb drivers for Pavilion P6-2312ea running Win 7 x 64 3
Hello
My step daughter has finally threw his arms up in the air and agreed that win 8 is more pain on a desktop that is worthwhile and is not for her.
We have installed Windows 7 64 bit and are now just trying to find the compatible drivers for SM Bus controller and usb 3.0.
I'm assuming that the drivers for usb 3.0 as the keyboard and mouse are ok, just the 2 front usb 3.0 do not work (although that seemed to have given up after a week).
We executed the 'original' pilots when he was running Win 8 x 64, but they don't seem to have. Maybe a compatibility problem, can be me as it was very early this morning when I gave up for a while.
Any help/pointers gratefully received
TIA
Elmer
Hello
Please check the following post:
Kind regards.
-
HP 15-d033se: can not find the controller video 3d, usb controller for my product
I need a controller 3d video and usb controller drivers please, I can not just them is for "hp 15-d033se.
and if there is that advice please explain
Hello:
In order to install the graphics for your laptop, you must:
1 install the Intel chipset driver and restart.
This package contains the utility to install Chipset Intel andDriver for notebook models and operating systems. Thisutility active operating system show the correct name for the Intel hardware installed in the DeviceManager of Microsoft's.
File name: sp64343.exe
2. install the Intel HD graphics driver and restart.
This package provides the driver that allows the IntelHigh-definition (HD) graphics in the models of laptops that arerunning an operating system supported. If the video output multimediainterface high definition (HDMI) is supported, this package alsoinstalls the HDMI Audio Driver.
File name: sp66213.exe
3. install the driver Nvidia graphics and restart (it is the one that actually installs the controller 3d video).
This package provides the driver that allows the NVIDIAHigh-definition (HD) graphics in the models of laptops that arerunning an operating system supported. If the video output multimediainterface high definition (HDMI) is supported, edia video output (HDMI) interface is compatible, this package also installs the driver HDMIAudio.
File name: sp64346.exe
USB3:
This package provides the driver for the Intel USB 3.0 controller host for the laptop models running a supported operating system. The driver allows USB 3.0 devices.
File name: sp64706.exe
-
Yellow mark points - controller Ethernet &; USB Controller
I have a dimension 4550 o/s Windows XP Professional 2002. I have never used the computer on the Internet, but note that there are of the yellow question marks next to the Ethernet and USB Controller controller. Now, I need to use the computer on the internet and of course need of these at work. Go to the search on this site, I have re-installed the Chipset Driver and she appeared "found new hardware" for both. However, so what goes in the "found new hardware found' it asks to install the software. I tried to insert the resource CD that came with the pc, but cannot find the required software. In addition, I cant get onto the internet to find the required software. Any ideas please?
First of all, be aware that Windows XP reaches the end of life in April 2014 for more information, see Service Pack 3 for XP and Office 2003 end of life April 2014. Continued use of Windows XP should be avoided.
Assuming that you are willing to connect Windows XP to the internet, you must install at least Service Pack 3 XP: http://www.microsoft.com/en-us/download/details.aspx?id=24
It is also recommended to install Microsoft Security Essentials: http://windows.microsoft.com/en-gb/windows/security-essentials-all-versions and its last definition to minimize the risk of having a Windows XP installation without patch: http://support.microsoft.com/kb/971606 (32 bit)
You need to install the Dell system software: http://ftp.dell.com/utility/Dell_System-Software_A06_R288017.exe
Intel Chipset Device Software: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775
For the controller network and video device provide the hardware ID as there are variants to this model. See the Windows reinstallation Guide / a Clean Install of Windows XP step 12: http://philipyip.wordpress.com/dell-community-forums/
As mentioned above the drivers need to be downloaded on a USB stick using another PC.
-
Hello. I've recently switched to my HP Pavilion 500 (product # G5B59AV #ABA) windows 8.1 for windows desktop PC 7. I was able to install the drivers that worked through them looking for web. However, my attempts to install the USB controller in the tab two other devices of computer management has been problematic.
I go to hardware ID and pull them to the top
PCI\VEN_1022 & DEV_7814 & SUBSYS_2B17103C & REV_09
PCI\VEN_1022 & DEV_7814 & SUBSYS_2B17103C
PCI\VEN_1022 & DEV_7814 & CC_0C0330
PCI\VEN_1022 & DEV_7814 & CC_0C03I then find the driver I need to install to solve this problem. But so far that many solutions I looked online haven't helped me. I was brought here by this forum post: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/downgraded-hp-pavilion-touchsmart-all-in-one-pc/2f91c517-330e-4ade-ab60-5bb2b7e53e10?page=2
But still could not solve this problem. I have tried many attempts and downloaded and uninstalled AMB Catalyst software several times. I really like any other method can someone tell me step by step instructions. A video would be nice, but really just looking for something to finally resolve this issue. USB hubs on the front do not work and I really wish that any method that could solve this problem.
Thank you in advance.
Hello
Check their documentation online with the HP Support and drivers, diagnostics and ask to their
Forums about known problems. Update the BIOS, chipset of low level driversand major
device embedded and separate drivers.HP support/troubleshooting & drivers<- set="" your="" model="" and="" then="" your="" version="" of="">->
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/
======================Hardware & drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-7Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems-----------------------------------------------------------
This is my generic instructions for the correct driver updates:
This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
for the drivers Microsoft hide - updated those without drain in their names. (Also updated
the BIOS and chipset drivers.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete modelyour video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I'm looking for a (usb) universal serial bus controller driver for my Pavilion for computer laptop 15-ab216nz as well as the network controller
Hello:
For the usb controller, download, unzip and run the file setup.exe from the link below.
There is no information online on what model of card wireless (network controller) of your laptop is.
Thank you for posting material ID for the network controller, so I know what model wireless card it is and then I'll post the link for the driver, you need to.
To find the hardware ID, go to the Device Manager and click on the network controller who need the driver.
Then click on the Details tab in the upper part of the window network controller.
Now you will see a drop-down list of property and it will be set to the Description of the unit.
On this list and select the 2nd (Hardware ID).
After the first string of characters you see in the window.
-
Hello I bought HP 15-ac025TX (M9V00PA) computer laptop computer laptop. I installed all the drivers from the HP site, here is the link
but still driver network controller not found also wifi works do not I installed blutooth drivers too. I use Windows 7 sp1 (32-bit)
For network controller device ID is PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
Secondly, univeral serial bus controller driver (usb) not found
I installed all the drivers on link also updated windows, but still no solution
the usb controller hardware ID is
PCI\ VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03
and finally, I am unable to download the graphics driver AMD/Intel switchable high definition (HD). the download link works not
KINDLY SOLVE THE PROBLEM
Thank you
Update:
While the pilot I know work is not made yet, I did some detective work and explored some other links from HP broadcom WiFi card driver files, and I found one that should work for you.
He says that it is for HP desktop PC, they put the exact same form factor of the card wireless to a desktop PC in a laptop.
I see not why this driver would not work, because the configuration file contains the same hardware ID you have posted. Here's a partial copy and paste of the setup information file driver, and you can see the hardware ID you have posted is supported by this driver.
x 86-Win7
;
[BROADCOM. NTx86.6.1]
% BCM430N_DeviceDesc % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C
% BCM430N_DeviceDesc % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_22D3103C
% BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_2232103C
% BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_22D4103C
% BCM430N_DeviceDesc_HPY % = BCM43XNG_NT61, PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103Chttp://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_149257_1
Maybe you are looking for
-
Macbook Pro retina does not illuminate
Hi all I have a 2015 13 "Macbook Pro, that will not start at all. Last night I came back after a day holiday and powered to the top of my Macbook for the first time in two weeks. The battery level was around 25%, so I plugged the magsafe and did some
-
Satellite A200: Can I use the recovery disc without wiping the drive
I read the threads on this forum, but I did not come with an exact answer to my problem. With my regular PC, I got a disc of Installation of Vista, which is also a recovery disk (like that could do with XP). One of the most useful things is that when
-
Qosmio X 300 - touchpad and mouse do not work
After that I was recently reinstall antivirus, something was wrong here and at some point cursor stopped on the screen without moving. Touchpad or mouse worked. I tried to restart the laptop several times... but the result was the same - keyboard wor
-
No escucho una radiodifusoraSonido playsecure grabar sonido el
No escucho has una radiodifusora desde internet, the pido ayuda porque antes if podia escucharla
-
computer guard install an update while turning off
When I turn off my computer, Windows is to install an update, but it retains "installation", for hours, the computer is not turned off. Problem: I can not turn off my computer properly, unless I use the "start/stop" - button and I can't install the u