HP DeskJet Ink Advantaje 4535: HP DeskJet All in One-4535 driver problem

Similar Questions

• HP Deskjet All in One 3545: printing problems

  1 shows low ink icon. A left less, just half. Thought b & w cartridge is low. Ordered and this has changed. Print an alignment page. During the printing of new document, new alignment message came. Returned and gave the print order. Print a faint fary. Check the ink level. Right and left less. Stop printing. What needs to be done?

  2. when the printer is on, sound of NEEQ move is not smooth, little stumble.

  3. If put more than one paper in the tray, all are drawn in and then deported without no printing. Even place a paper displays the message that says to remove the paper and place it again in the status bar.

  4 visit to a mechanic charges are prohibitive.

  5. help online?

  6 resets useful?

  7 printer is in mode (wi - fi) network

  Hey @Achyut18,

  I understand that you have some problems with the printing of your Deskjet Ink Advantage 3545 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done this document describes How to solve print quality problems with your printer. If after completing the document, you still have problems with print quality, then the cartridge will need to be replaced. Please find below the link to contact HP support.

  It seems that you may have had a problem with collection of paper in the printer. This document explains How to solve problems of choice. If after completing this coument you are still experiencing problems with pulling on the paper then the printer will need to be replaced. Please find below the link to contact HP support.

  If you are looking for other support options, from real cartridges not refilled to replace, or if the printer needs to be replaced so you can contact HP support directly by clicking here and filling out the form below.

  I hope this helps with your problems and I hope you have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Canon ImageCLASS MF4150 All - in - One Printer Driver problems with Windows 7

  Anyone else had problems with Windows 7 compatible drivers for Canon ImageCLASS MF4150 all-in-one printer?  I downloaded the drivers from the Canon Website, but my computer does not recognize the driver.

  Tried the Canon support? That would be my first port of call...

• HP Deskjet All in one printer model F4280

  I am running VISTA 32 bit OS, and I have a HP Deskjet all in one printer model F4280. After having updated the software and the drivers from the HP website. Printer is on and I connected all the cables ensuring that all are in good working condition.

  I plug the printer by USB connection in my laptop and everytime I try to print anything from any program, including internet explorer 9, he brings just a notice saying ' Explorer crashed and stops.

  Can someone help me?

   

  Hello

  1. What is the exact error message?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).

  Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).  Always before A.
  Under Vista, updated on an HP laptop.
  Already checked for printer is installed and works properly and for updates of device driver and the computer restarted.
  Help?

  But... not the same question... the next Document in HP
  maybe worth a visit:

  HP printers - Scan button on the
  Printer does not work properly when
  the printer is connected to a Windows
  Vista computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809848&LC=en&cc=us&DLC=en&product=303756&rule=23585

  You may be able to find additional documents to the service the customer of HP:
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en and... It may be interesting to try to uninstall/reinstall the drivers of all-in-One.

  Also... If it is a recent issue, it may be interesting to try to make a system
  Restoration of some time before he started.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Good luck...

• HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  I DO NOT PRINT A LOT AND I HAVE TWO PRINTERS. THE EXPIRATION DATE ON THE CARTRIDGE, THE PRINTER DOSE NOT LET ME PRINT. I KNOW THAT THERE IS WAY TO OVERRIDE THIS PROBLEM, BECAUSE ON MY PREVIOUS PRINTER THEY REPLACES THE KEY.

  The error message itself will remain but will continue to print. This message will remain until the cartridge is replaced. Substitution is the printer printing always regardless of the error message on the display screen.

• HOW can I SUBSTITUTE of INK CARTRIDGE EXPIRATION IN HP all-in-one 8600

  HOW can I SUBSTITUTE of INK CARTRIDGE EXPIRATION IN HP all-in-one 8600

  Hi @jfinny,

  I am able to provide you with more information about your printer model 8600 and its ink delivery system.

  Only some models of HP printers supports a substitution.

  If supported by your printer, when you print, you should be prompted to press OK on the printer to continue.

  If you do not get the prompt to click OK, your printer will deal with the similarly outdated cartridge as it does a cartridge missing or empty. It is designed to protect the entire printhead inside the unit.

  You can view more information about these resources:
  Consumable inkjet HP - ink Expiration

  Cannot print when one of the HP ink cartridges is empty

  You can also take a look at the limited warranty for print HP ink and print heads replaceable by the customer of consumables HP inkjet cartridges.

  I found this information in the HP Officejet Pro 8600 - User Guide, but I don't know if it helps at all;

  Used with this printer HP cartridges contain a memory chip that helps with the use of the printer. More, this memory chip collects a limited set of information about the use of the printer, which may include the following: the date when the cartridge has been installed, the date where the cartridge of the last use, the number of pages printed using the cartridge, coverage of the page printing modes used, any printing error that occurred and model of printer. This information helps HP design future printers to meet the printing of our customers needs.

  To disable the collection of usage information:
  1. on the printer control panel, press the arrow to the rightand then press Setup.
  2. Select Preferences, and then on cartridge chip information.
  3. press OK to disable the collection of usage information.

  NOTE: If you disable the memory chip's ability to collect information on the use of the printer, you can still continue to use the cartridge in the printer HP.

  I would like to know if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• 3636 Deskjet all-in-One: ink cartridge is Deskjet 3636 configuration necessary?

  The black cartridge for installation provided with my printer all-in-one Deskjet 3636 recently bought is defective. My printer does not recognize the cartridge. I followed all the troubleshooting steps, including turning on/off the printer and the cleaning cartridge, however, nothing works. What the configuration required to install cartridge? The color cartridge is recognized and the printer is connected wireless. The only issue I'm having is the black cartridge. Could I buy a regular black ink cartridge and use it for the first impression?

  Yes, you must use cartridges for initial Setup configuration and operation of the printer. The best way to solve this problem is to put the printer in return for Exchange.

• HP Deskjet all-in-one: HP Deskjet 3520 will not print black, period

  OK, I've lost my WHOLE day, searched forums, has done what others have tried, poste posted HP Facebook, doing whatever is humanly possible to get my printer to print in black. I ran the clean printhead, black ink changed TWICE new cartridges, reloaded drivers, reset the default open to the top of the printer and tried to manually clean the head after only 4 hours to do everything I can possibly do to get this junk to print in black. The printer is only a year old and the cartridges are freshly bought from the store. So, tell me what am I missing or is the printer ready to be stoned?

  Hi @ChrisBird,

  Welcome to the HP Forums

  Looks like you've covered most of the steps, but I will propose always to have a look through this document printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series to ensure that you have verified that the event on both cartridges.

  If this does not help still nothing and will not always be the black print, please call our technical support team and request a replacement printer. At THAT TIME, regardless of the warranty, they should be able to establish that the replacement for you. Otherwise, let me know and I'll do my best to help you with a resolution.

  The pleasure of you talk to soon!

• DESKJET ALL-IN-ONE 2540: HP DESKJET ALL-IN-ONE 2540

  Just installed HP DESKJET 2540 ALL-IN-ONE.  Wireless printing for iPad works great, but PC Dell, print quality a part of the printed text only demi-imprime throughout all documents.  I tried to clean the cartridges, printer, align the cartridges and go through all these steps.  Even the printed sheet of alignment has the lines of half-print on the page.

  Hello @Oregon_Peeps,

  Welcome to the Forums of HP Support!

  I understand that you have a print quality problem when you print your Windows 7 computer to the all-in-one printer HP Deskjet 2540 and autonomous. I would like to help you to solve this problem today. What is unusual is that the autonomous alignment report shows failure to print quality with half-print lines, but when you print from your iPad everything looks great. Because the default occurs on the report of alignment that the problem you encounter is hardware related. Thank you for all the troubleshooting steps you have already finished before joining the Forums of HP's Support. At this point, I'll make go you through some additional troubleshooting steps.

  Please click here to access the print quality troubleshooting procedure. When the support document opens do execute Solution a, Solution three, and five, and six and seven. This includes all sub-steps under the listed Solutions. Pay close attention to manually clean the ink nozzles. In addition, yor need to run up to 3 clean your print head. If you have already run several cleaning please do not operate everything cleans more than ink is used to clean the printing system and we do not want to waste the ink more.

  Once the troubleshooting completed, test please print again.

  • If the problem persists, the alignment success or failure on your machine?

  Please reply to this message with the result of your troubleshooting. Good luck!

• The HP Deskjet all in one printer/scanner has no control on the printer, then how to scan?

  I can print wireless from my iPad to my printer/scanner HP Deskjet 2540, but cannot see how to scan from the email on my iPad unit. Is it possible to download the control panel scanner/copier on my iPad?

  Hello

  You can scan using the HP all-in-One Remote app, available for the App Store.

  You can find a step by step instructions below:

  http://support.HP.com/us-en/document/c02486319/

  Shlomi

• HP deskjet all-in-one 3632: problems to make eprint to work

  OK, I'm having a problem making the printer to connect to the internet.

  I have a static IP address on my ISP.   I have 1 n600 Router 2 broadcasting networks.  1 5 g and 2 1. 4 g.   I used void net default 192.168.1.1 and 255.255.255.0.   This router I have a win 7 64 home computer hard wired. I also have a hard wired my Office Access point. the access point also broadcast a GIS of different 2.4 g.  all the sig.s wireless use wap2 Protocol and b/g catch up mode. and the names of all different but same network total network, if that makes sense.  OK, I have a total of 4 more also attached computer too either or network win7 32 ultimate win 7 64 and win vista 32. 2 tablets and 3 IH smrt 5.01 lolipop android running.  I have 2 security cams that have a static for IP and port forwarding on them.  everything works fine.  all computers are part of the same private network hmegroup.  I assigned a static ip address for printer dhcp table.  I can print from any device at any time via wifi.  NOW HERE'S THE PROBLEM.  whenever I go to the WEB form, he is saying that its not active all the check boxes and I don't know what a proxy server is but I know that I have not installed on this network so I click No proxy server.  The PRINTER SAYS UNABLE to CONNECT to the INTERNET.  every time that I tried about 20 this weekend.  It says to check the dns, gateway, blah blah blah.  so the DNS are correct and it shows not 192.168.1.1 as the gateway.  He also btw autodetected it correctly.  so when it fails to connect, I click on web print report. I get the page "get the most out of your printer.  and then a white page. and that's all.  at the top of the page to "get the most out of your printer" it says in "BOLD", "your printer is not connected to a network" which is BS do see on every device and every computer wireless or hard-wire. and I open it a new browser window using 192.168.1.143 which is the static ip address for this printer and bam. It opens right.

  When have I forgotten?  can I configure the gateway as the ip of the real gateway side the ISP of my router.   Im a little aggravated because the only reason why I got this printer from walmart that the PHN android already had the makings of plugin hp on them and I don't like HP is cause of all the fluff sofware that comes with them.  I almost had a gun, but they seem fragile and plasticy more than this one does.  so as I said work is expected for printing on the web.  I tried to press the eprint button and it flashes a little and nothing. I pressed it and the 'i' button and nothing ever prints other than the above page.  I have reset to the default values and done everything as configuration 2 x.

  If anyone can help, I would be very happy.

  facorbin

  Hey @Facorbin,

  Welcome to the Forum from HP Support.

  I see that you are unable to activate the webservices in the all-in-one printer HP Deskjet 3632. I want to help you with this. I have some suggestions that might help.

  I recommend you try the following steps:

  • Enter the IP address in a web browser , and press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  If this goes through successfully, try to activate the web services () again. If you're still coming up short after this point, I recommend you enable DMZ mode in EWS your router, manually add the IP address of your printer. (Based on the level of detail, I suppose you're a statement you know what that means). After completing this step try to enable Web services one last time. Success?

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to express your thanks by clicking the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• HP Deskjet all-in - One 1051 registers as an all-in-one Deskjet 1050

  Recently bought a HP all-in-one Deskjet 1051.  After you have installed on the computer, he enrolled as a series of J410 Deskjet 1050 all-in-One.  I was wondering why.

  The numeric designation may vary according to the regional location or the retailer where the product was purchased. It can also link in how the product as the default value of different media formats, for example in North America with paper letter against Europe with A4 size. What it boils down to is that your printer is a Deskjet 1050 printer specific specialized series for a retailer or the country.

• DeskJet 2544: 2544 HP Deskjet all in one printer series No. CN4172BO1M

  Hi, I have a problem with my HP Deskjet 2544 printer all-in-one [personal information deleted], I experience a gray line through the text the two lines that makes text blurry and difficult to read.

  I cleaned and aligned the print heads, changed for a better print quality that has helped a little, but the line is still in the text, can you please advise.

  Hi @oldfeller1,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you are using an all-in-one printer HP Deskjet 2544 with a Windows Vista PC and printed text is blurry and difficult to read because of the grey lines through all the lines of the text of couple. I would like to help with that.

  Here is the document of support designed to be used with this type of problem - fixing poor print quality.

  Please let me know if that solves the problem, or if you need assistance.

• DeskJet All in One 2540 series. How can I find the name and address of the fax server?

  I'm working on my Windows 7 64 bit computer laptop and I try to send a fax with Microsoft Fax and Scan and HP Deskjet 2542 all-in - one network.

  When it comes to the name and the address of the fax server, I can't find it.

  Can someone tell me please know how to find it please?

  Thank you very much for this information.

  You use a server on your network, and that is why you do not connect to a fax modem? If so, then please follow this entire document to Microsoft Fax Server Guide for step by stepwhich explains how to find the name of Sever.

  Please post your results again!