Download iTunes single episode problem

Similar Questions

• Problem downloading iTunes

  Recently, I tried to upgrade to the latest version of iTunes.  The installation froze and since then I can not download iTunes ("is there a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider staff or the support package).  I tried to go into the Apple software update, but I get a message "the parameter is incorrect." I have no idea where to go from here. Any help would be greatly appreciated. Thank you!

  Windows 7

  Try to repair the Apple Software Update of the programs and features Control Panel, then see if iTunes installs normally.

  If not for general advice see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• Problem opening after downloading itunes

  I downloaded itunes successfully on my desktop (XP), but my response to re enter my password to icloud, Data Protection closed the prog. I can't get around that despite my settings of all the senses. Advice please. Makes me nutz.

  Hi William,.

  Thank you for keeping us posted.

  I suggest you perform the steps in the section provided.

  removal of iTunes/Quicktime / resettlement problem

  https://discussions.Apple.com/thread/3148163?start=0&TSTART=0

  If the problem persists, post the question in the Apple support forums.

  https://discussions.Apple.com/index.jspa?view=discussions

  Hope this information helps. Get back to us if you have more queries about Windows.

• When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  Problem Windows install

  When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  I looked at several forums and tried cleaning patches, etc they suggest.  I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)

  I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!)  Someone out there has a solution?

  Hello, Atwitsend...,

  Try to repair.
  Go into Add Remove Programs, then select Apple Software Update > change > repair.

  If this does not work, try to uninstall. .

  Remove and reinstall ITunes, Quicktime, and other software components
  http://support.Apple.com/kb/HT1923

  Download the iTunes Installer and save it on your desktop.

  http://www.Apple.com/iTunes/download/

  Try to install iTunes using the installer that you saved.

• problem installing Windows while trying to download itunes

  I am trying to download itunes and I always get an error to Windows Installer. I tried all of the corrective actions; uninstalling, reinstalling, revo, etc.. I don't know what to do now.

  The computer is an Acer. Windows Vista. 32 bit OS. x 86.

  Trying to download ITunes 9. I was able to download fully on computer, but the application would never open. The tab on ITunes has had an error in it. Could that cause problems with it? Started having problems with it when I updated about a month ago.

  Please can someone help? I think maybe I should just clear everything and start over with my backup disks. I don't mind what to do if someone thinks it will work.

  Thank you

  Kim

  Download, install and run the Windows Installer cleanup Utility at: http://www.softpedia.com/progDownload/Windows-Installer-CleanUp-Utility-Download-18442.html and then try installation again to see if that helped.

  If that doesn't work, put the installation on your desktop icon and right-click on it and click on run as administrator and see if that makes a difference.

  If not, request the assistance of the technical support forums and iTunes at: http://www.apple.com/support/itunes/ and http://discussions.apple.com/category.jspa?categoryID=149.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  Hello 2sealadies!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
  
  
• Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
• Click Next. You should see the disk button.
• Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
• Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
• In the disc window, click Open, and then click Next and then click Finish.
• Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
• Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

See you soon!

• Download iTunes for Windows 10

  I am trying to download iTunes for Windows 10 and get these two messages:

  The feature you are trying to use is on a network unavailable resource.

  And...

  Cannot remove the older version of iTunes. Contact your technical support group.

  Can someone please help?

  Kind regards

  Fred.

  Take a look at this trick of CSA provided by the user to help with iTunes and Windows troubleshooting. Take the time to read through the tip of all, and then follow the instructions to your problem. Troubleshooting problems with iTunes for Windows updates

  Turingtest2 has compiled the most comprehensive list of iTunes and Windows troubleshooting tips. You should be able to get your problem fixed with this tip sheet.

• When I download itunes on my pc, I get an error of analysis package, any help?

  "When I download itunes on my pc I get a parse error in the package, any help?

  Hello xlAdrenaline,

  Thank you for using communities of Apple Support.

  If I understand your message that you receive a packet parse error when you try to install iTunes on your Windows PC. The following article has some great not to help solve this type of problem:

  If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

  Best regards

• Podcast app keeps downloading an old episode

  I'm under v2.4 Podcasts on an iPhone 6 s, iOS 9.3.4. I have the app value delete played episodes. The app keeps downloading the same episode of 2013. I've marked the EP as played several times but it keeps just downloading. Podcasts, that subscribe, it goes only with one, and it's always the same EP.

  Known issue with Podcasts, but no solution ever. You can try the normal troubleshooting steps below. If not, report it directly to Apple via this link: http://www.apple.com/feedback/

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone: https://support.apple.com/en-us/HT204184

  If your backup in iTunes, make sure that it is an encrypted backup.

• will not download Itunes using Windows 10

  whenever I try to download and install iTunes, I get a message saying thanks for the installation but it never downloads or installs iTunes. I had problems with iTunes, then I uninstalled later I went to apple.com and I can't for the life of me to download or install iTunes.

  Check and sure for a complete uninstall of itunes from your pc. ThenTry download itunes, if the same problem recurs, try after some time.

• Download iTunes to recognize my iPhone 6 times out of 10 Windows.

  I use iExplorer to backup my iPhone 6.  When I was a little cleaning up files via Panel control WIndows 10 I deleted iTunes on my PC because I never use it. (I did not remove a file or a program that did not have a name that I recognized as an application I installed, but no longer use.  If I had doubts, I did not hit delete.)

  After I deleted iTunes iExplorer would not see my phone, I found. It turns out that iExplorer using iTunes. So I downloaded and reinstalled the 64-bit version of iTunes for Windows 10.  (iExplore said if your phone is not recognized, verify that it is recognized in iTunes first. So I've been focused on fulfilling that.)

  I'm sure that iTunes is updated.  I've updated the iOS on my iPhone 6. I made 10 Windows is updated. When I plug my iPhone on my PC using a USB cable, the computer asks me if I know the PC and let him access to my iPhone. So I know that the phone is recognized by the PC through the cable.  But when I go to iTunes and pull down the FILE menu and select DEVICES, everything is gray.  I tried the update level, reboot, reboot and connect it in different orders, using different USB cables, using different USB ports on my HP PC Envy.  iTunes will not see my iPhone as it was when I bought my Windows 10 PC.

  Today, someone suggested that I try another PC.  Then at work, I downloaded iTunes on my Windows 7 PC. Once it was installed I plugged my iPhone with a USB cable.  iTunes recognized my phone without problem.

  Then I came home and uninstalled iTune.  Then I downloaded a new copy and reinstalled.  He still does not recognize my phone.

  What Miss me?

  Did you just use Control Panel to remove iTunes? If so, you did not uninstall completely. See this support document for instructions on how to remove and reinstall iTunes properly. Remove and reinstall iTunes and the components of the software for Windows 7 and later versions - Apple Support

  If that's not enough, then see this document of support for the other steps to download iTunes recognizes your device troubleshooting. If iTunes does not your iPad, iPhone or iPod - Apple Support

• Can't download iTunes on Windows 10?

  Hello

  I was wondering anyone could help me please? I have 10 windows and recently bought Office 2016. I am trying to download iTunes and much failed several times! He repeats to me 'Apple Application Support was not found. Apple Application Support is necessary for the performance of iTunes. Please uninstall iTunes and then reinstall iTunes. error "error windows 2". I reinstalled many times and watched a you tube video where does not download u WinRAR but still. My iPhone 5s is also not recognized? I uninstalled my antivirus as well and I've checked that I am the administrator just incase, but did not work then I would be really grateful for the help. Thank you very much.

  There are to many sites around that provide incomplete iTunes downloads. Use this link direct Apple.

  http://www.Apple.com/iTunes/download/

  If you are still having problems installing, delete first of all personnel related Apple and iTunes.

• I downloaded iTunes on a new laptop computer and he allowed. First of a süden, I can't sync my iPhone 6. What can I do?

  I downloaded iTunes on a new laptop computer and he allowed. All of a sudden, I can't sync my iPhone 6. What can I do?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Update iTunes 10 Windows problem and Solution

  I have a solution that worked for me, when Apple's CEO did not all trying to update iTunes 10 Windows.  I do not claim that their solution was bad, just that it has not resolved the problem for me, but lead me to the solution that did.

  The problem I had was that during the update, I would like to get the package of Windows error message that wouldn't let him proceed in process.  "There is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your supplier of staff or the package of support ".

  THE SOLUTION: click on the Windows icon and go to settings > system > applications and features.  Click on Apple software update > change > change > repair

  Once the repair has been completed, I was able to install iTunes without any problems.

  How I found this solution: I tried the recommendation to Apple for this message exact error uninstall and reinstall iTunes, who had the same error message.  The next step was to uninstall QuickTime and iTunes, then the Apple Software Update.  At this point, the Apple software update wouldn't uninstall and generated the same error of Windows package as described above.  I fixed Apple Software Update and rather than proceed with the rest of the facilities, I advanced and installed iTunes.  He worked like a champ and he saved me a bunch of times.

  Thanks Airshipguy. It really worked.

  I have not tried all the recommendations of Apple support, being out of pocket for the time and also the uncertainty of losing the settings. Before you read this post, I tried to repair only iTunes. After reading the post above, I fixed all facilities Apple in a sequence such that the last of them was that of "Apple Software Update". I made this sequence intuitively and have no scientific reason.

  For those who need to be more aware of 10 Windows, right click the windows button, select "Programs and features" and then search for Apple. As indicated in the post above, it's the "Apple Software Update" that did the trick.

  My response was to reassure people that it works. Often, a single post does not give that confidence to give it a go!