Download of virtual machine using extremely slow browser data store

Similar Questions

• Migrated virtual machine appears in the two data stores

  Hi all

  A bit of background on our installation first. servers ESX 3.5 vcenter 4.0 (just improved 2.5) + 2 + 2 data warehouses configured in 1 box of MSA.

  Here is what happened. I've migrated a VM from A to B data store using "Migrate" in vSphere client on vCenter.

  On the vSphere client, virtual machine displays now two data warehouses. In the browser data store, the vme even appears in the two data stores. Datastore shows 20 GB to 20 GB provisioned and 0 GB to 20 GB used. B displays 20 of 20 put into service and used 20 20 GB.

  Migration seems to have succeeded. I migrated about 10 other vm and they reside only on a data store. All virtual machines are working properly. I tried to migrate the computer back to A virtual. He showed only a data store. But the problem appeared again when I migrated the vm to B. I tried to move the virtual machine back and forth between servers ESX, no difference.

  Any ideas? The virtual machine is working well, and it is not necessarily a critical problem. But it's annoying, because I intend to reorganize the data store has and the fear it could cause a problem.

  Thank you so much in advance!

  anything mounted on the CD/DVD drive, as an ISO which can be on A Datastore?

• Virtual machines, run extremely slow when the console is consulted 2 virtual machines Windows Server 2008 64-bit, Windows Server 2003 32-bit, 2 VMWare for virtual machine

  I'm in a difficult situtaition here.  I am the daily contact with a new client.  My linux guy, who is also my boss who is very busy, asked me to do some research trying to find answers for what's not on this server. We have a dual Quad Core 2.5 Ghz Lenovo server with 10 GB of ram.  2 500 GB hard drives are Raid 1.  We run Virtual Server VMWare 2 on a Debian with Gnome installation as a user interface for the side of things Linux.  Grub is the boot loader. There are two virtual machines running on the server.  The one machine that serves as a domain controller is a Windows SBS 2008 Server 64 bit, and the secondary machine has no responsibility domain.  The second machine is a Windows Server 2003 32-bit.  the 10 GB of ram 6 GB is allocated to the SBS server and 4 GB to the 2003 server.

  The problem I am running into is that everything is so slow, especially if I connect remotely to do any sort of administration on the network.  Some examples of issues I've noticed is that as soon as I log on the server via Remote Desktop SBS console management Windows Server spike to 80-95% CPU usage and it will not stop unless I close the management console.  Another instance is that if I open Backup Exec 12.5 on the SBS server it will kill the speed of the processor as well.  Long story short, there are a lot of machine to do what we need to do, but something is not configured right and non of us know what it is.  Another point to note is that the server has been in production for about 3 weeks, and the server seemed to have locked up just twice.  My professional guess is that over time, some chose thing is eating causing the crash of the memory.

  Sorry I do not have much technical insight on this topic, but this is the best I have to offer.  Any questions you all have, I'll ask my people and see if I can answer, but I could really use your help here.

  Thank you in advance,

  Heath

  2 things:

  1 you really need hard drives more than 2 in a RAID 1 for proper performance under load. More disks the better. Although I don't think that's what your problem is, he'll probably be the problem Next you will do.

  2. I don't know exactly where the configuration file is on your box of Debian for VMware Server, but you should consider adding the following options in the configuration file (on windows, it's the vmware 'config.ini'):

  prefvmx.minVmMemPct = "100".

  MemTrimRate = 0

  sched.mem.pshare.Enable = "FALSE".

  mainMem.useNamedFile = "FALSE".

  If you do some research, you can read about what these options (the largest is the memory page sharing - it should only be left on if you have a bunch of similar virtual machines running on the same box, that you don't have.) I honestly know why this is on by default, he kills the CPU when virtual machines are running different operating systems). These are the options that I now use standard in VMware Server deployments, with huge performance increases after you have added the. Just give a try.

  Edit: Also make sure that you have installed in your virtual machines VMware tools.

  Dimitri Rodis

  Integrita Systems LLC

  http://www.integritasystems.com

• Move a virtual machine from a to another data store

  I ve just added a hard drive on my ESXi server and created a new data store.

  I need to free up space on the original data store, what would be the procedure to move virtual machines within the old data store to the new? (and keep them whitout work break)

  Thanks in advance.

  Facundo.

  to register for a guest, do a right-click on the .vmx file in the data store window and choose 'Add to inventory', follow the instructions

  If you believe this or any other answer was helpful please consider giving points by checking the answer "correct" or "useful".

• Move virtual machines from a to another data store

  Is there a recommended (or integrated) way to move propelled out of virtual machines from a data store? Or is it a cut simple and working of dough which can be done from any client PC connected to the underlying storage providers?

  If both, store data Source and Destination are connected to the same server vCenter, do Storage vMotion. Make a right-click VM--> migrate--> change of data store and select the Destination data store.

• How to create the new virtual machine vm existing in the data store on ESXI

  I have ESXi and couple of virtual machines.

  I have the vsphere client on Windows 7.

  I then deploy the ovf from the vsphere client vm and it began to import my VM 30 GB.

  In the morning, I realized my vm with a vmdk file file has been transferred in the data store

  But I couldn't see any virtual computer.

  Now I don't know how to turn on this vmdk file that is in my data store

  @King_Robert

  It's a very bad habit of yours to just copy and paste content created by someone else, without even mentioning the source (http://www.mustbegeek.com/create-copy-of-existing-virtual-machine-in-esxi-server/)

  André

• Storage DRS, move a virtual machine that is in the data store is not a member of DTS

  Dear all,

  If I've set up storage DRS that contains, for example, DS1 and DS2. I have another virtual machine that resides on DS that is not part of the cluster of DTS. Can I move this virtual machine to one of the (DS1, DS2) data store? OR will some disruptions?

  Thank you

  Jocelyn,

  Which is correct in both cases. You can leave DTS place it for you (which is my suggestion), but I thought you wanted it to go to a specific data store.  That being said you can reactivate the DTS for a virtual machine under the SDR change settings if you do not ever clear for a virtual machine

• List virtual machines within a host, the data store and the specified how cluster?

  Hello
  I found the code shows but not able to understand. The exit is not what I want.

  Get-VM | Select Name, @{N="Cluster";E={Get-Cluster -Name "Site1UCSCluster01" }}, @{N="ESX Host";E={Get-VMHost -VM $_}},@{N="Datastore";E={Get-Datastore -VM $_}} |fl

  But, the exit wrong that these virtual machines do not reside on Site1UCSCluster01:

  Name      : CBEDM
  Cluster   : Site1UCSCluster01
  ESX Host  : Host1
  Datastore : CBEDM-DS3-R5
  
  Name      : CBEDMTest
  Cluster   : Site1UCSCluster01
  ESX Host  : Host2
  Datastore : CBTEST-DS1-R5

  Thanks for your help,

  So try like this

  $clusterName = "MyCluster" 
  
  Get-Cluster -Name $clusterName | Get-VM | Select Name, @{N="Cluster";E={$clusterName}},@{N="ESX Host";E={Get-VMHost -VM $_ | Select -ExpandProperty Name}},@{N="Datastore";E={Get-Datastore -VM $_ | Select -ExpandProperty Name}} |fl
  

• Could not start the new virtual machine or VM remove a data store

  Hi guys,.

  I'm not new with ESXi, but my knowledge with vCenter and Clustering must be improved, so here's my problem.

  We have a Cluster of 2 ESXi 4.1 hosts on a San with 2 VMFS.

  My first problem is when I created a new virtual machine and try to start it, I got an error message similar to the one included with this post.

  My Second problem is more picky. Since I am unable to start my new virtual machine, I had removed from drive and I had created a new. But when I took a peek in the data store where was deleted VM, the directory with all the files are still there. When I try to delete it, I got an error message telling me that it is impossible to proceed.

  Q please?

  Best regards

  Stéphane

  82% of failure can be other issues.  The article below

  http://KB.VMware.com/kb/1006052

  Also, I saw, where bad records DB for your ESXi hosts can cause weird problems as well.  The host with the problematic guest, can you do a right click on it and "disconnect"?  Try to get out of the bunch at the data center level.  If you get an error vCenter, that means return folder DB.  From there, while the host is in a disconnected state, remove the host to vCenter, then "add host". This will update the DB record.  Maybe worth it?

• How to install an operating system on a virtual machine using the ISO file?

  Hello

  I use vmware workstation version 6. I have different kinds of opersting systems likeFedora, Ubuntu, Windows xp CD to install on my virtual machines using the CD-ROM drive.  . I want to know is possible to install a virtual machine via an ISO file?

  Thank you

  mypass

  Yes

  Click on "Menu" > "new" > "virtual machine".

  Click on "Customize."

  Select "next".

  Select "install-disk (iso)".

  Click 'Browse '.

  the rest is explained

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Deployment of virtual machine using VMware Orchestrator

  Hello

  Can you help me pls with deployment of virtual machine using VMware Orchestration?

  Thank you

  Rekha

  Hello, Rekha, welcome to vCO take a look at my blog to get an idea of how use vCO. Christophe & I (and a few guests) have posted some tutorials around doing things with Orchestrator. Particular interest to the subject of this thread would probably be this series into three parts:

  Create a vCO simple self-service VM Provisioning Portal - part 1

  Create a vCO simple self-service VM Provisioning Portal - part 2

  Create a Simple Self Service VM Provisioning Portal vCO - part 3

• How to specify the file of virtual hard disk when you create a new virtual machine using virtual hard disk on the data store?

  I'm new to PowerCLI and find quite simple, but in the documentation I read, I don't see how to use a virtual hard drive, existing on a data store when you create a new virtual machine.

  Is this simple registration on the virtual hard disk, or did I miss something?

  My current create VM is the following statement:

  New-VM

  -Name $TargetHostName -host $TargetVMCenterHost -data store $TargetVMCenterDatastore DiskMB - 20000 -MemoryMB $TargetHostMemoryMB -NumCPU $TargetHostCPUs -ID $TargetHostOS -CD -Description $TargetHostName

  Didn't notice this before, but I think that vSphere will use a backslash instead of a slash in the paths.

• Syntax to create a new virtual machine using vCLI

  I use few of ESX 3.5 servers and a server vCenter 2.5 in my lab. I installed vCLI in vCenter server. I would like to know the command to create a new virtual machine through the vCLI. Use of the below details to provide the syntax / command.

  • Name of VM - windows2003
  • CPU - 2
  • Memory - 2096 MB
  • Name of ESX - esxserver1
  • Storage - disk 30 GB C and 40 GB D drive (these two must be placed in a storage centralized. i.e., data store name is - "filer1.lun123"

  Expecting more details.

  Thank you

  Ganesh

  VCLI orders are mainly used for configurations of the host, although as part of the installation of vCLI, you get also vSphere SDK for utilities Perl - http://www.vmware.com/support/developer/viperltoolkit/viperl41/doc/vsperl_util_index.html that provide additional canned scripts, which allows you to create a single set of virtual machines using the vmcreate.pl script. There is an example on how to use a script

• deploy multiple virtual machines using vmdk and SID file

  Hello

  Need to know if I am correct or miss me something... I deploy many virtual machines using method.

  1. remove the vmdk files a XP.

  2. create new folders and copy the vmdk into this folder.

  3. create virtual machines using existing vmdk files.

  4 rename the computer and join it to the domain.

  My question is, my VMDK files are an existing xp VM (no longer exist), what is the status of the deployed virtual machines? they still have the same SID or it is changed? I managed to join to the domain, but do not want surprises in the future.

  Note:

  I had another option, could have all these automated with new SID using PowerCLi, unfortunately, osCustomization has default, I can't event run the get-OsCustomization command, it keeps failing.

  Thank you.

  Yes, Windows writes the SID on disk (virtual disk for virtual machines) or physical disk for physical machines.  The guest operating system has no idea on the vmx file.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Virtual MACHINE using GHS restore CD

  I'm new to VMware and I'm trying to implement a virtual machine using XP Home.  I created the virtual machine and I am trying to use the restaurant 3 CD to install the operating system.  The first CD works fine, but the second can not open the file .ghs.  When I try to open the .ghs file it shows same not she, but a .gho file is there, but does not work.

  Any suggestions?   I need to convert a .iso?  If so, how?

  Thank you.

  Theoretically, you can't use restore CD to configure a new virtual machine, because they are technically linked to the computer to which they belong.

  Because the virtual hardware for a virtual machine is completely different with the material belonging to the restore CD, I don't expect that it will work well. For the case, it works well, you could face activation problems, due to the completely different (virtual) hardware.

  You might need a copy of XP retail to do a clean install of XP.