Download updates windows on one machine... and their installation on others... .is it possible!
If all the computers on my local network are running the same version of the operating system, then can I install updates on all of the machines by allowing only a single machine download updates...?
No........
Tags: Windows
Similar Questions
-
Windows Update keeps trying to download Update KB 2416447 Secuirty but never, it installs and does not
Hello Roy Green,
Thanks for your post. Take a look at this thread for a possible solution to your problem. Please let us know if it did or did not help to resolve this problem.
See you soon
-
Since I installed the service pack 1 of windows on my laptop to install antivirus 2012 pack that I can no longer download updates windows. How can I solve this problem?
I get error codes 80071EFE. 80072EE2. 80200010.Hello
Perform the steps in the article mentioned below and check if the problem persists.
Hope this information helps.
-
Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?
Hello
You are unable to download the updates?
Try the following steps to resolve the problem:
Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.
Check out these links:
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-offhttp://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.
Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:
See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
http://support.Microsoft.com/kb/958052
Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows live one care and microsoft security essentials
I use a windows live care and now it time to renew a subscription so I want to know what is the different between Windows Live one care and microsoft security essentials? should I stay with windows live care?
Windows Live One care is discontinued.
http://OneCare.live.com/standard/EN-AU/default.htm
Read the above info.
WLOC uninstall it before installing MSE.
Two AVs installed may cause blockages of the system, etc..
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.Microsoft.com/security_essentials/
Microsoft Security Essentials offers protection in real time to your PC at home that protects against software viruses, spyware and other malicious software.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Microsoft Security Essentials questions should be directed to the MSE Forums:
http://social.answers.Microsoft.com/forums/en-us/msestart/threads
Installing and upgrading Microsoft Security Essentials program.
http://social.answers.Microsoft.com/forums/en-us/msescan/threads
Analysis, detection and removal of threats
http://social.answers.Microsoft.com/forums/en-us/mseupdate/threads
Update the definitions of spyware and viruses
See you soon.
Mick Murphy - Microsoft partner
-
List virtual machines and their DNS server settings
I try to list virtual machines and their primary and secondary DNS server addresses. Are the cmdlets in vmware that can do this, or would I need to use the invoke-script command. I have the list of virtual machines and I want to list them all with their DNS server addresses.
I tried to use the wmi objects such as:
Win32_networkadapterconfiguration get-wmiobject - computername "servername |
Select name, DNSServerSearchOrder
It would give me the specific server name and addresses of dns.
But I need the list of servernames which I would like to list some and their
DNSserversearchorder settings (DNS settings)
I tried to put the servernames list in a text file using
Get - vm | Export-csv C:\computername.txt - notype
Then I used the get-content command and the pipe in the get-wmiobject
command like below:
$servers = get-Content c:\computername.txt
ForEach ($server in $servers)
{get-wmiobject Win32_networkadapterconfiguration - computername $server
| where {$_.} IPEnabled-fits 'True'} | Select-object
name, DNSServerSearchOrder
But when I run this command fails with errors such as a pipe empty
element is not allowed. I don't know if the above script has all synatx
error or what is the best way to get a list of servers and their dns server
Parameters.
I know the wmiobject maybe out of this range in these newsgroups but there at - it a script in powershell, vmware or windows powershell to get a list of servername (which are mostly VMS) and their DNS server settings.
Try the following script to get the DNS search order:
Get-Content c:\computername.txt | ` ForEach-Object { Get-WMIObject Win32_NetworkAdapterConfiguration -Computername $_ | ` Where-Object {$_.IPEnabled -match "True"} | ` Select-Object -property DNSHostName,DNSServerSearchOrder }Best regards, Robert
-
Update Windows Defender 80240016 error and McAfee Internet Security program not scan
Original title: I get an update of Windows Defender 80240016 error. What can I do about it?
I get a updated Windows Defender 80240016 error and now my McAfee Internet Security program not scan. What can I do about it?
I get a updated Windows Defender 80240016 error and now my McAfee Internet Security program not scan. What can I do about it?
McAfee must have disabled Windows Defender during the installation of McAfee.
You must disable Windows Defender.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off
-
How can I do a full system Back Up, including installed programs and their installation data?
Hello
My question is how can I backup the entire system including installed programs and their installation data.
I want to say clearly, backup of data of a personal nature such as my documents or my music (except records of program/data sets) is not the case.
I want just the backup of the system (including drivers, registry and other files releated) and installed programs.
I tried to back up the entire disc.
The problem with, I met is "Windows backup failed while attempting to read from the shadow copy on one of the volumes to back up.
In other words, I want to know the folders to back up and which is not (without getting that error again).
With gratitude,
Guy.
Hello
If I understand correctly you want to backup your computer completely, however you tried to run the Windows backup utility and has encountered an error, "Failed to backup Windows while trying to read from the shadow copy on one of the volumes to back up", is that correct?
To answer your question, Yes! You can perform a backup can be done which includes your data and installed programs.
System Windows Image backup
What is a system image?
Back up your programs, files and system settings
Restore your computer from a system image backup
Please follow the troubleshooting steps to fix the windows back up in question.
Method 1Perform the steps in the article to resolve the problem.
Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
http://support.Microsoft.com/kb/973455
See How to back up or transfer your data on a Windows computer
Method 2
Scan the computer for infections and then run back up please analysis the computer for infections by using the links below.Reference link:- http://www.microsoft.com/security/pc-security/default.aspx#Safety-products-and-scans
Microsoft antivirus software: -.
http://www.Microsoft.com/security/PC-security/malware.aspx
Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
Please let me know if the steps provided above resolves the problem or if you need assistance.
I hope this helps. -
I download the trial version Criative cloud, and during installation pops up the error 201, what's the problem?
Hello Michelle,.
Please see the links below:
Error download or update Adobe Creative Cloud applications
Download Creative Cloud - error 201
It will be useful.
Concerning
Bianka Attre
-
Need to move virtual machines and power over the other ESXi HA and issues of Configuration of power
Dears
Need to move virtual machines and power on ESXi others using the HA and Power Options
So what are the Options I need activate and deactivate:
Turn on Vsphere HA
Activate the tracking host
Admission control (disabled)
VM Machine Options
VM restart priority (medium)
Response from the host of off the power isolation
VM monitoring (people with disabilities)
Monitoring of (high) sensitivity
Heartbeat of data store (select one of cluster data warehouses taking into account my preferences) of the data store is checked
On each:
Start/stop of the virtual machine is turned off
Please indicate the required Options and on virtual machines, we are not turning on?
Just to be clear, that VMware HA will only restart the VMS if ESXi hosts fails - or surveillance of the VM is turned on which will be monitors VMs will they crash or suspend and restart the virtual machine affected.
and just to be clear, that the response of insulation parameter has nothing to do whther THAT HA will work or not - it does come into play if the ESXi host is isolated of the HA - Cluster
xMotion works only between active ESXi hosts that can communicate with the server vCenter - and if the ESXi host broke down or became isolated and vMotion may not work.
vMotion is automated with DRS that vMotion will a VM who need more resources to an ESXi host with enough reosurces.
-
Windows XP
I installed Windows updates through update automatically. He finished and I rebooted the computer, but when it restarted, yellow shield was still on the Board. I clicked on it, once again and installed the same updates. I went to Windows update and installed from there he compoleted and said success but icon is always on trayy. I don't see these updates in Add/Remove. Besides I have SP # and I'm not sure why I get these updates.
original title: installation of updates KB263383, KB2518864, KB2572073
See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-updates-kb2633880-kb2633870-are-not-being/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9
-
Summer running Windows 10 Pro 64-bit for months without problem on my G2 ElitePad 1000; application Windows 10 updates throughout - so far. Yesterday, 12/11/2015, 1511 (threshold 2) updated version of Microsoft automatically downloaded and rebooted to start installation of operating system upgrade. The upgrade completed the first phase "Copying files" and began the second phase "Patterns and drivers", then stopped (paused) to 40% total progress/23% features and drivers progress with no other response. Only one stop 'hard' (hold down the power button / stop for at least 10 seconds) worked. On 'power up' the result was a "restore previous version" immediately, and subsequent reboot restored my previous login - as expected.
HP have a new image or update for Windows Pro 64 - bit version 1511/threshold 10 2? The update is put on hold due to a driver issue? Any advice would be appreciated.
Finally, a solution for me! I used Microsoft's latest "MediaCreationTool" (as of 11/13/2015) to download and create a "USB stick" (08/01/2016) upgrade support.
-
Download to more than one machine
Hi, I'm about to buy an iMac so I'll have two running. A new will be used only for editing in lightroom. Download LR at more than one machine?
Hello
Yes, you can install and activate the Adobe product on 2 computers (MAC or Windows) with 1 license, but can use it only 1 computer at some point of time (not both at the same time)
Thank you.
-
When I try to download an update such as KB971514, the States of MS web page validation is necessary. When I press on continue takes you to a page of validation with another button continue to validate. I click on that and you get a result of vaildiation failed. However, when I press the button "validate now" it validates fine
I havd a 100% legal OS and software and download updates without any problem. Validation has never been a problem until now.
I had vista on my molding machine home for 3 years with no problems. However, did move to Ultimate Apr 2010.
Any ideas why IE8 fails?
woxof,
I don't know if this can somehow apply in your case, it does not hurt to try the link http://support.microsoft.com/default.aspx/gp/pc_ie_v8intro
you will find Internet Explorer-specific support in this MS forum: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads
I hope that this post is useful.
Let us know how it works.
-
Cannot install updates windows (KB973593), (KB973704), KB976416) and (KB974561).
I can't install Microsoft Office Excel 2007 (KB973593), Microsoft Office System 2007 (KB973704), Microsoft Office InfoPath 2007 (KB976416) and updates of Microsoft Office Word 2007 (KB974561). After installation and restarting Windows, my updates are still there. I installed them manually, but that doesn't seem to work.
Hello
Do you really need these updates? If they are installed you can right click on it in the control panel - Windows
Updates and HIDE.Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary, you can get free reports of incidents.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
The value of 2016 Outlook as default e-mail client... Does not!
Hi all New user for os x here Please can someone help me - I want to configure outlook 2016 as the default mail client, so that when I click a hyperlink for e-mail, the outlook client open, rather than the mail client. I tried to go into the mail cli
-
stop the picture of the economy between runs
Im having trouble trying to keep an array of recording of information between executions. Here is a picture of my Subvi. Basically im taking a picture of a cluster and turn it into an array to pass to a DLL. The part circled in red is the table that
-
Just need some advice on downloading movies on my netbook.
I just got a new netbook a couple of weeks, the idea of the netbook was that I had for entertainment such as movies and music where-ever I went that cause me and my parents travel a lot. I thought to download but then I'm not sure which site to downl
-
Why windows usually accepts the product key on PC my mother bought new?
My mother bought this new laptop... It got a virus so I've restored the whole system & now windows indicates product key is not good... I entered & checked the figures to ensure that they are just many times & get the same pop up saying: "the product
-
Windows 7 experience side freezes at the base of 10 lots direct 3d
When I try to run windows 7 experience of note it starts in hangs then and freezes a lot 10 3d direct assessment on a user account, but works ok on a different user account. Any ideas as to why?